Profitability Analysis for Project and Project Team

Hello Experts,
Need your ideas and expertise to the below business case, could be simple or complicated, please provide some insight.
the business case is like this. 2 specific project teams are available. there can be around 10 projects executed in a year. So in our PS we can have project team allocated to a project. workforce planning is done for the project for effective utilization, it is like 2 projects with 2 teams assigned. till now it is fine. the business calls for that 1 st team is assigned to another project only after closure of the assigned project.
Let us assume P1, P2,...P10 are the projects in a year. Assume T1, T2 are the teams available. Initially T1 is assigned to P1, T2 is assigned to P2.
Business confirms that T1 will be assigned to P3 only after completion of P1. This requirement is also straight. Assume that team T1 has executed 6 projects and team T2 has executed 4 projects.
The requirement is profitability analysis at project level i.e at P1, P2, ...P10 which is also pretty straight. Business requirement is also to have profitability analysis against each team i.e for T1 and T2. it is like each team has a project lead and team assigned under him. based on the expenses and revenue booked against the team, there will be performance evaluation of the team.( assume that P1, P3, P5, P6, P8,P9 are the projects executed by team T1, we need to have revenue and expenses of the said projects to be mapped to team T1 as well), so we have profitability analysis at team level.
Experts, require your advice on how to map the requirement. Is there any possibility to map projects to team rather assigning team to a project. please advice. provide some insight on how do we map the scenario.
Regards,
Murthy

Hello Murthy,
In SAP you carry out Month end closing activities. In order to carry out this activity, you post all period based data on the project. Subsequently data relevant for Profitability analysis can be determined for the given period and then this data can be settled to COPA.
This data can be evaluated in the project information system or in Profitability analysis.
You can check report KE30 for Profitability Analysis.
Refer SAP help for more details
http://help.sap.com/saphelp_erp2004/helpdata/en/7a/4c3aad4a0111d1894c0000e829fbbd/content.htm
Regards
Tushar

Similar Messages

  • Function Point Analysis for SAP BW Projects

    Hello All,
    Have been assigned a task to come up with Function Point
    analysis for SAP BW projects.
    Any help will be appreciated.
    Thanks,
    Mainak

    Hi Mainak,
      Function Point Analysis is independent of technology, methodology or platform, so there is no function point analysis specific for sap bw, rather you should familiarize with the fundamentals of FPA.
      And as you might know, FAP is used to determine whether a given a tool, an environment or a language is more productive when compared to others.
      I can send you good links if you can give me your email-id.
    Hope this helps...
    Thanks,
    Raj

  • How to move Event (not necessarily connected to Projects ) and projects to new external drive

    I am running Snow Leopard 10.6.8 and iMovie11 9.0.4 have a had very stressful time trying to clear down the Movies folder from my internal drive and get it across to a new external hard drive, as my 700gb drive on my 2009 iMac is practically full. I have taken a full back-up and also created a new 1.5 TB partition on the external drive. However I do not know how to get the Events and Projects across, and for iMovie to know that every thing is now on the new drive.
    Initially I copied the 2 folders using finder, which seemingly worked but then I discovered that iMovie did not display the the new events, so I deleted the 2 folders from the external drive and tried manually moving the events in iMovie. This was very slow, with lots of spinning wheels and eventually iMovie crashed. So I moved the new Event copies I did manage to create into trash, but still iMovie was crashing.
    I then, thinking something had become corrupted, I  tried to restore the Events folder and Projects folder from my backup, but that did not work as I got a message saying the there was not enough space to do the copies (why does it need extra space as I assume it would be overwriting the existing folders ?). So in desperation I did some forum searching and ended up deleting the com.apple.iApps.plist. Now iMovie seems to be working fine, and is displaying al the events from my internal drive (I have ejected all other drives), and I am back to square one (hopefully), however for some reason the 'month' folders I had previously created in each Event 'Year' have disappeared and all the, for example 2013 events, are now under the 2013 folder with no Month sub folders( I assume this is something to do with the preferences I had deleted ?)
    I am hoping someone can direct me on the right path for getting the Events (not all of which are used in Projects) and Projects across to the new external drive, so I can free up space on the internal drive (and install Mountain Lion - my end goal).
    I have been  trying to do all this since 0600 this morning, so if anyome can help it would be very much appreciated.
    Jim (now grabbing a much needed beer !)

    Do the external drive show up in iMovie 11?? I just drag and drop in iMovie and don't touch it or change in finder.

  • Projects and Project Libraries

    I've been happily using Projects since they were introduced in LabVIEW 8-something.
    I've got a Project whose task involves examining directory trees containing other VIs.  In some cases, the VIs my code examines have the same name as one of the VIs being used in the code (I'm running in Development Mode, not from an executable).  To avoid "name clashes", I did a search on NameSpaces and learned about Project Libraries.
    So I've successfully ported all of the files in my Project into a similarly-named Project Library.  The code works just fine.
    Today, I opened my Project to look at one of my VIs, and to my horror, the Project had none of the files showing.  It also didn't show the Project Library (where I "knew" all the files were located).  A tad worried, I looked on my disk, and found the Project Library (.lvlib) file -- if I double-click it, there are my files!
    What I'm having trouble doing (maybe because it is impossible!) is getting a view "inside" my Project Library from the Project Explorer.  Given the close relationship between Projects and Project Libraries (the second is created from the first, for example), I would have expected to see such a link.  Does it exist?  Or are you expected to open both a Project (which, in my case, has files that are not in the Project Library) and the corresponding Project Library?
    Note I did a search through the NI Documentation on Project Libraries, and what I read emphasized the close relationship between a Project and an associated Project Library, including giving them the same (or similar) name and keeping the files in the same folders.  [Hmm -- I just realized I did not name my Project and Library identically -- I called the Project "Project XYZ", and the Project Library "Library XYZ" ...].
    Experience "from the field" would be most welcome!
    Bob Schor
    Solved!
    Go to Solution.

    HandyAndy wrote:
    Would you mind posting your project so someone could take a look at it?
    Dear Handy,
         Humble Pie time (again!).  When I saw your request, I said (to myself, silently) "Just how dumb do they think I am?".  So this morning, I brought back an earlier pre-Library version of my Project, captures some screen shots of "Before", and started to (re-)create my Library.  I couldn't remember exactly how I did it before, so I followed the steps in the LabVIEW 2011 Manual.  I did a "New, Library" from My Computer in the Project, and dragged stuff into it.  This time, I noticed there was a lot of "saving VIs" that I didn't recall from my earlier (first) Project Library.  When I was done, there, in Project, right where I was expecting to see it (but wasn't!) was my Project Library!
         So what did I "do wrong" before that caused the Library to "disappear" from the Project?  Who knows, but I clearly did something (mysterious) incorrectly -- I'll try not to do whatever-it-was again!
         Onward and upward (or maybe onward and downward, since Austin, home of NI Week, is south from here ...).
    Bob Schor

  • Inventory Report for actuals  and  projected?

    Hi,
    currently i am doing APO-BI Project. I have a requirement to extract the Opening stock from ECC and Projected(Forecasted) Opening stock from APO.
    both are 2 different key figures 1 is from ECC and another one is from APO. I need to display in Bex report in
    say for example, if we have 53 weeks in a year. if i run the report in week 25, in the bex report it has to display the Opening stock values from ECC up to week 25 and remaining weeks till 53 weeks it has to display Projected Opening stock values in the same line.
    plz provide me the logic to achieve this report.
    regards
    venuscm

    Hi,
    Create Two Cubes one is for APO and another is 0IC_C03 for Inventory. then build a MP on both and create reports.
    Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
    Use :See the steps how to load the data to 0IC_C03.
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
    0VALSTCKVAL      " For Value
    0VALSTCKQTY      " For Qty
    0CALMONTH        " For Month
    Use the above combinations in New Selections in columns and go it.
    For Qty Opening:
    New Selection, drag and drop following InfoObjects
    0VALSTCKQTY     " For Qty
    0CALMONTH       " For Month and restrict with less then or equalto option variable (single value, user input)  and set the offeset
                    " value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
    For Qty Closing:
    New Selection, drag and drop following InfoObjects
    0VALSTCKQTY    " For Qty
    0CALMONTH      " For Month and restrict with less then or equalto option variable (single value, user input) .
    In the same way build for Value and other Keyfigures on 0IC_C03.
    And
    Drag & drop
    0MATERAIL
    0PLANT  " Give some Input Variable.
    Thanks
    Reddy

  • Final Cut Export DVCPRO HD720p uncompressed/hi-res for tape and projection

    Well I've been through the many suggestions found throughout the forum and have tried many combinations of exporting options, timeline options and codecs and still for the life of me can't find the one that works. Please offer any advice you can.
    Objective:
    Export a 30 minute film with a DVCPro HD 720p60 timeline shot in 720p 23.98fps as uncompressed and as high resolution as possible for transfer to a Beta-SP for big screen projection.
    In trying the Uncompressed 8 and 10 bit exports the film's video became jumpy and some color's over saturated to the point of pixelation (is that a word?). I've created new Uncompressed timelines and exported from there as well to the same over saturated/pixel effect.
    Is just an export of a Quicktime movie with current settings and then use compressor with "DVDPRO HD 720p60" my best options? I've tried that too but not happy with the softness of some of it and as we're projecting BIG, I want to have the best resolution possible.
    Oh - and this time - size does NOT matter.
    Thanks for any pointers.

    What I mean is - how to create then a Quicktime someone without Final Cut can play. Exporting as a self-contained Quicktime movie does not seem to creat the stand alone file I may need. Any tips?

  • Tables for Stock and project stock

    Hi Friends,
                               I have to create a report consists of Material No. Stock Qty, WBS Element, Batch NO..So Please convey the Tables and fields.
    Regards

    Hi Prasanna,
    Find below the details for
    1. Project stock:
    Material No. MSPR-MATNR
    Stock Qty -> MSPR-PRLAB (Unrestricted), MSPR-PRINS (QI stock), MSPR-PRSPE (Blocked), MSPR-PREIN (Total stock of all restricted stock)
    WBS Element -> MSPR-PSPNR
    Batch NO -> MSPR-CHARG
    2. Stock:
    Material No. MARD-MATNR
    Stock Qty -> MARD-LABST (Unrestricted), MSPR-INSME (QI stock), MARD-SPEME (Blocked), MARD-EINME (Total stock of all restricted batches)
    Hope the above helps.
    Regards,
    Vivek

  • Has anyone used Paragon NTFS or Tuxera for Median and Project Files

    I have read lots of discussions about why this is not a good idea but my two options are to do this or switch to Sony Vargas for everything so it would be good if people could let me know if they have had this working successfully.
    So has anyone successfully used either of these 2 NTFS drivers to edit SD/HDV or Prores projects on? My only experience has been using SD footage on an NTFS drive with the free NTFS-3G drivers. This worked fine as long as project files were on non NTFS drive (for same reason if I saved project on NTFS is saves a file with a size of zero bytes).
    Regards,
    Ben
    PS I wonder if this thread will stay on topic;).

    Macs can read drives that are formatted in NTFS as is. The software you mentioned enables a Mac to write to those drives. That said, you should edit using drives that are optimized for FCP and formatted Mac OS Extended.
    Nothing to stop you copying the media from an NTFS drive to work with and then copying the finished result back.
    As you are now in the position of having to do this, why not do a test and report back with your results?

  • Space for training and project files

    I need to find a virtual space to put my training files, with
    3 gb and I
    would like that server had a file manager to allow downloads
    for specific
    users (login and password), choosing what each one will be
    able to make.
    Anyone knows?
    Thanks
    [ ]'s
    Renato

    Hi all
    Just to add to what others have offered here, the hosting
    service I use is way reasonable. I only pay only $48 per year and
    have 3,000 MB of space. Check it out by
    clicking here. I've used them for
    years and am quite pleased.
    Cheers all... Rick

  • CAPTURING OF COST IN PROFITABILITY ANALYSIS FOR  BY PRODUCT

    Dear Team,
    We had a requirement when standard material cost estimate is executed we can get the standard price for main material as well as by product for which values are flowing to COPA (T.code KE30).
    The scenario works fine for Main Product, since the actuals as well as Costs are flowing to COPA. Where as only actuals are posting to byproduct as there are no separate cost estimate for Byproduct.
    So only acutals are caputured to Profitability analysis.
    At present we are manually changing the price of the byproduct material through MR21 which is constant through out the period.
    Our requirement:- Since Byproduct doesnt have any separate BOM and Routing, Is it possible to capture this byproducts price to COPA.
    or
    capturing of COGS for this byproducts price is also ok.
    Please anybody can guide me.
    Thanks & regards,
    Sandeep

    Dear Santosh,
    Thanks for your early reply.
    It might work, Please elaborate.
    Request you to send any document if you have any, since i am new in CO.
    it was availbale in my user profile.
    Thanks & regards,
    Sandeep

  • COPA Values in the Profitability analysis for a credit memo request

    Hi All,
    When I am trying to create an Invoice document for a Credit Memo request having a Configurable material , in the accounting document profitable analysis Profit Center view fields are not getting updated.
    If we do the same thing for a reference material profit center view fields are getting updated properly.
    What is the problem with the Configurable  material.
    Thanks in advance,
    RajaMahi

    I would start fresh with a new sales order.  When you create with reference both the return delivery and credit memo are created with reference to the return sales order.  Here is an example document flow to clarify:
    Document                                      Date               Qty/value   UoM/Cur   Overall proc. status
                                                                                    Return 60000077 / 10                          08/25/05               10.000  EA      Completed                                 
    . Returns Delivery 500000016 / 10             08/25/05               10.000  EA      Completed                                 
    .. GD returns QI 4900030060 / 1               08/25/05               10.000  EA      complete                                  
    .. Credit for Returns1 10000017 / 10          08/25/05               10.000  EA      Completed                                 
    ... Accounting document 10000017              08/25/05               10.000  EA      Cleared

  • Task dependencies and scheduling in Oracle projects and project management

    Am I correct in the belief that Oracle projects/project management does not have the ability to create, manage and track dependencies between tasks in a project ? And to achieve that micro level of planning I need to use something like Microsoft Project Integration ?

    Gordon,
    Project integration is the link between Oracle Projects and MS Projects.
    If you want to define dependencies between tasks, MS Project is best bet
    for you.
    Cheers,
    Gopal
    [email protected]
    www.sagss.com

  • Age analysis for customers and vendors

    Hi All,
    i needs to create an age analysis report on customers and vendors (0FIAR_C03), analysis could be done on <30 days, >30 days,>60,>90,>120 days , i needs to calculate these based between netdue date for payments and system date. any one can give idea how to do this
    thanks in advance.
    regards
    raja

    Hi Raja
    http://help.sap.com/saphelp_nw04/helpdata/en/41/4b73415fb9157de10000000a155106/frameset.htm
    Try checking the above link. You can use RKF .... Use offsets --- for example <30 offset is -30 in varibles.....
    Standard reports should give some idea
    Regards
    Naga

  • Analysis for Office and Sharepoint Integration

    Hi everyone,
    we're looking for a possibility to open Analysis for Office Excel documents directly within SharePoint.
    The BO Integration kit doesn't seem to support Analysis for Office documents.
    Is it possible to use the Excel Services within SharePoint?
    Is there any other way to open the Analysis document directly within SharePoint as this is possible for "standard" Excel-Documents?
    Thanks for your help in advance.
    Best regards,
    Torben

    Hi Michael,
    the problem I am facing is not the generation of an OpenDocument link, I was already able to build one, but the passing of parameters to the Analysis workbook.
    For example, I have an Analysis workbook based on a SAP query with a mandatory BEx variable. With the OpenDocument link I want to set the value of the variable dynamically.
    Best regards
    Stephan

  • Any recommendations on productivity for database and project management, Bento was good but no longer sync with ical and address book

    I've unfortunately updated to the new Bento on MakBook and iPad and synced my data and in the process it tells me that iCal and Address books will not sync any more.  I have several projects I am working on and looking for something that will syn with iCal, address book and Busy Cal to manage my  time efficiently and seamlessly. Help?

    I think you're in the wrong forum - this is for developers, who write programs for apple products.
    As for Bento, their problem is due to Apple's changes in the API.  The code that syncs with calendars and contacts is now deprecated, which means at some point in the future, it will no longer work.  This problem will affect all developers, so you probably won't find any replacement for Bento.

Maybe you are looking for