Program BBP_EXTREQ_TRANS failure

Hi All,
We are using ECS of SRM 5.0.
When we are executing BBP_EXTREQ_TRANS report to create shopping cart in SRM using PR generated in backend, it is getting stuck in SMQ1 (outbound queue in R/3) with status "ANORETRY". Once PR is created, EPRTRANS table is getting updated with relevant PR number.
Checked log into SLG1, but nothing found.
Following config is completed:-
1. RFC user (as Service) created in R/3 as well as SRM as well as has been maintained in Org structure and local Pur Org and P Grp is assigned to it.
2. In R/3, Tables V_160EX & PR are maintained.
3. replicated vendor, material master, plant , product categories from R/3 to SRM.
Please revert ASAP.
Points will be given for appropriate answers.
rgds,
Ravi

Hi,
The program BBP_EXTREQ_TRANSFER is used to transfer the PReq from the backend to SRM. Table EPRTRANS have information about PReq to transfer.
Configuration guide on Plan-Driven Procurement(PDP) with Plant Maintanance available on http://service.sap.com/instguides (Business Suite\SRM)
Re: Plant Maintenance and ECS SRM
Using transaction SMQ2, check the inbound queue in the Enterprise Buyer system and activate it if necessary
Integration of external requirements for Enterprice Buyer Professional
If purchase requisitions are to be procured via an external procurement system, these are transferred to the target system by means of report RPRSEL01. For this purpose, report RPRSEL01 reads table EPRTRANS which collects the requirements to be transferred. To do this, you must either start the report manually or schedule it periodically. The length of the period depends on the number of requirements to be transferred. A date is assigned to the report as an additional criterion. This date determines until which release date the purchase requisitions are to be transferred. If the release date lies after the date specified in the report, the purchase requisition is not transferred. The transfer itself is carried out via qRfc (Queued Remote Function Call, see also standard documentation). It is returned to the calling system if an error occurs in the target system for which there might not be a solution. In this case, the queue of the qRfc is blocked and all subsequent transfers cannot be carried out. The qRfc monitor (Transaction SMQ1) is used to check the queue. Check this monitor if the external requirements to be procured do not get to the target system. Furthermore, SAP recommends you to check this monitor from time to time.
If errors occur, you can generally solve these in two ways:
1. Delete the failed call in the qRfc monitor.
When doing so, note that there is a loss of information. In other words, the currently failed transfer of the purchase requisition is lost. If this is required, for example, for time reasons, you can restart the transfer in two ways.
Enter the purchase requisition manually in table EPRTRANS with status 2 or
Make a manual change to the affected items of the purchase requisition.
However, in both cases, analyze the error cause and solve it before the new transfer.
2. If possible, eliminate the error cause in the target system and restart the queue of the qRfc in question. Read also the standard documentation on the qRfc.
You can view error messages from the target system through forward navigation in the qRfc monitor.
Report RPRSEL01 uses "RPRSEL01" as a standard name for the qRfc queue. This name can be overwritten during the call of the report.
Prerequisites for External Requirements
http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/c0/5ee6415b006024e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/55/4af548688211d4977e0004ac962ee6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/55/4af54b688211d4977e0004ac962ee6/frameset.htm
See the foll threads for more pointers:
PDP - PR transfer error ANORETRY
PR form R3 to SRM - ANORETRY
Blank account assignment in plan-driven scenario
Re: PDP ( T160EX ) Query
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Similar Messages

E51: program removal failure

Hi everybody,
I'm facing recently a big problem with my E51.
Each time i try to remove a sis/sisx program that i previously installed in my phone memory or memory card, the following message shows up "Removing failed" . But removing and installing java programs has no problem. Also if i tried to install any sis/sisx program from the phone or using PC Suite , the following message appear "file corrupted" although i was able to install the same program before without any error messages.
Please help me to solve my problem even with ideas
Thank you
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo
Solved!
Go to Solution.

First of all thank u hadimassa and mgoksoy for replying.
I can't uninistall or inistall any sis/sisx programs from my phone memory or memory card.
i already tried resitting my phone twise before but nothing happened. i removed the memory card and also reset the phone and tried uninstalling programs i installed before on phone memory but without progress. the same message " removing failed " keeps showing.
Uninstalling program failure is the same either i used backspace on the application or by using the application manager.
i guess i have a hopeless case and u r the only hope .
thank u again guys for replying
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

Anyone have a refine edge/mask 'program error' failure?

Refine mask or edge constantly fails and reports a 'program error' dialog box after the OK button is pressed.
The file is small and my computer has the horsepower to handle it - Win7 64bit, I720, 12GB ram, and 100GB scratch disk space. Saphire ATI 4850 video 1GB ram. Tried disabling GUI acceleration no luck.
This has started after I did a reinstall of CS5 last week.
Searched Google and narry a mention of it.
And this was my most desired new feature in CS5. Everything else seems to be running fine with the exception of certain modified f keys (such a shift - f?) not working properly but this has been reported by others.
Larry

Chris,
My memory is a little fuzzy right now as to exactly what was causing the
problem. Anyway I don't encounter it much anymore.
If I remember correctly I had the mask attached to curves adjustment
layer and ran refine edges from there. Example I wanted to darken the
sky so I made a selection of the sky. The horizon had lots of trees
which needed the refine edge command to clean up. I ended up applying
the mask to the pixel based image and clipped the curves layer to it.
Same result as far as the adjustment goes but the refine edge command
worked with the mask attached to the pixel based image. So, if I
remember correctly, it was a non-pixel layer with the mask attached that
caused the problem. Maybe I was using Decontaminate colors which could
cause the problem on a non-pixel layer. Could be that it worked
sometimes because I did not use Decontaminate and failed when used.
Anyway, I avoid attaching mask to non-pixel layers if I am going to use
refine edge. Have not run into errors since, but then it could have been
fixed in 12.0.1 update. Or maybe the stars are aligned properly now. Who
knows?
Win 7 64 bit, 12GB ram, I720
Larry

Scan and program reinstallation failures

Printer is not on line and firewall is on off and no network . Printer and scanning going good since 2006 until I tried to scan a negative, I think for first time ever. Scan bar goes quickly about 2 inches and lamp turns off and printer says shutting down, but it does not. Had to unplug, but printer would reset with all functions working(except film option). Uninstalled and reinstallation failed with error situation code 03215762. Print function works with other programs and copy function works, just can't scan, and there is no solution center since could not reinstall. Reinstallation goes to 2% with Current Progress - Stopping services - Service Print Spooler and bogs and will stay bogged for hours until end with Task Manager.When forced reinstallation ends and says removing files another error situation code 06458626 comes up with some lines retrieved from the installation error logs. Help would be wonderful.

Hey , Welcome to the HP Support Forums!
I understand that when troubleshooting a scan issue on your HP Photosmart 3210 All-in-One Printer you ended up uninstalling the HP software and driver package on your Windows XP computer and are now experiencing installation issues. I would like to assist you today with resolving this install issue. Can I please have you follow all of the steps below. If you have a USB Cable attached from your printer to your computer please disconnect that cable now. Step 1: Remove Drivers: Even though the install is failing, there is a good chance that a portion of the software and driver package made its way onto your computer. To resolve this issue it is crucial that we have a clean slate to work with. Therefore, to start troubleshooting I will be having you remove every trace of your printer from your computer. Click on your Start menuClick on RunIn the Run box type %temp% and select OKWhen the Temp folder opens locate the 7z.... folder. This is your HP Installer.Click on the 7z folder to open it.Click on the Util folder at the topClick on the CCC folderNext, click on Uninstall L3 fileIf a Command Prompt (black window) opens hit enter to proceed with the uninstall. Once the uninstall is complete restart your computer. When your computer comes back on please proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuSelect RunIn the Run dialogue box type %temp% and select OKIn the Temp folder click on the first item in the folder. Hold down Shift on you keyboard. Go down a few lines and select another item in the folder. Everything in between the two items you selected while holding shift will now highlight. Select the 'delete' key on your keyboard. Repeat these steps under the files in the Temp folder are deleted.The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. On Windows Vista, 7 and 8 if a Temp file is still be used you can simply 'skip' the used item and everything else will delete successfully. On Windows XP it's not so easy. You have to delete the Temp files in chunks. If a file is still being used you will get the pop up that is it used and the 'deleting' process will cancel itself. Take note of the file that is used and skip it next time you delete a chunk. It's a tedious process but necessary for troubleshooting.Once the Temp files are deleted close the Temp folderRight click on the Recycling Bin on your desktop and select Empty Recycling Bin Step 3: Run MSCONFIG (Disable): A background programming running on your computer may be causing interference when trying to install your printer. To ensure that no programs are going to cause issues, I'm going to have you temporarily disable the background programs on your computer. Click on your Start menuSelect RunIn the Run dialogue box type msconfig and click OKWhen the System Configuration Window opens select 'Selective Startup' and uncheck Load Startup ItemsClick the Services tab. Check the box at the bottom for Hide All Microsoft ServicesSelect Disable AllSelect Apply and OKRestart your computer when prompted Step 4: Install Device: Please click here to download the drivers for your HP PhotosmartOnce the download is complete please follow the onscreen prompts to install your printerOnce the installation is complete please test your machine to confirm that everything is functioning properly once again. If everything functions fine please proceed to the last step below to enable all of your background programs again and test your machine. Step 5: Run MSCONFIG (Enable): Click on your Start menuSelect RunIn the Run dialogue box type msconfig and click OKWhen the System Configuration Window opens select Normal StartupSelect Apply and OKRestart your computer when prompted. When your computer comes back on please test your machine again to verify that everything is still working for you. Please respond to this post with the result of your troubleshooting. You may also click the 'thumbs up' icon below to say "thanks for helping!" I look forward to hearing from you!

"'Catastrophic failure (Exception from HResult:0x8000FFF(E_UNEXPECTED))'" when updating a List item

Hi,
I am receiving the below error when I update a List item.
'Catastrophic failure (Exception from HResult:0x8000FFF(E_UNEXPECTED))'
I have enabled the Verbose logging, and below are the details of the error that I have taken from Log Files.
Application error when access /sites/exg/Lists/Applics/EditForm.aspx, Error=Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish) at Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish)
Kindly advise the resolution to avoid this error.
Thanks

Hi shameej,
i found a similar thread , can you plz check it?
http://social.msdn.microsoft.com/Forums/en/sharepointdevelopment/thread/2ee9e393-70f9-4ec7-b19b-f107ef204ef7
http://www.sharepointdev.net/sharepoint--development-programming/catastrophic-failure-after-itemupdatingeventhandler-66510.shtmlBest Regrads,
Ahmed Madany

Problem printing Dos-based program in Netware 4.11 environment.

I hope someone has a clue what could be wrong with this workstation:
One pc in our Netware 4.11 network has a network-printing problem. When
this pc tries to send a document to the networkprinter ( HP 8150 ) , he
receives an error-message. "The system could not overlay file
ibm_run.ovl, program initialization failure, Execution terminated"
He gets this error every time the networkprinter is accessed through Dos-
software and if i try to start Rconsole, Filer etc.
A friend of mine told me that the problem could be solved within the
Novell-client. Just change "Short-machine type to IBM". But that is
already the case! I even tried to reinstall the Novell-client, but
nothing works.
A few specs:
It's an Compaq Evo P4, Windows XP Professional SP1, Novell Client 4.90
sp2. Server OS: Netware 4.11 SB SP9.
Please help me out!

Well, the first thing to check is to see if the file IBM_RUN.OVL really
exists in the same directory as the tools you are tryign to execute.
For instance, all those tools are typically in the PUBLIC directory on
the server, and the file IBM_RUN.OVL should be there as well.
It might also be necessary that the PUBLIC directory of the server is
in the workstation's path. Normally, this is achieved automatically
through the login script. But maybe there was some change in your
environment.
Marcel Cox
http://support.novell.com/forums

About the job name

hi all,
could anyone please tell me which table contian the Jab name ,Job status(like schelued,cancled ect.) . i want to check the job status and print all the job which cancled out.
thanks in advance

hi
Job Status Explanation
Planned:
Steps that make up the job have already been defined, but the start condition has not yet been defined.
Released
The job has been fully defined, including a start condition. Without a start condition, a job cannot be released.
Only an administrator or a user with appropriate authorizations for background processing can release a job, preventing unauthorized users from running jobs without approval.
Ready
The start condition of a released job has been met. A job scheduler has put the job in line to wait for an available background work process.
Active
The job is currently running. Active jobs can no longer be modified or deleted.
Finished
All steps that make up this job have completed successfully.
Canceled
The job has terminated abnormally. This can happen in two ways:
An administrator intentionally terminates a job with
Transaction SM37, Job ® Cancel active job
A job step contains a program that produces an error, such as:
an E or A error message in an ABAP program
a failure return code from an external SAPXPG program

Code generation bug in Sun Studio 12

Hi,
The following program prints `Failure' when compiled with -xO4 where nothing should be printed (when compiled with no optimization or -xO2). It looks to me that the first comparison `buggy_routine' against 0x80 is returning True where it should return False.
#include <stdlib.h>
#include <stdio.h>
typedef unsigned long long int      EIF_NATURAL_64;
typedef unsigned char   EIF_BOOLEAN;
typedef int EIF_INTEGER_32;
typedef char * EIF_REFERENCE;
char s[] = "9223372036854775808";
void buggy_routine (EIF_REFERENCE Current, EIF_NATURAL_64 arg1)
    EIF_NATURAL_64 tu8_1;
    tu8_1 = (EIF_NATURAL_64) ((EIF_INTEGER_32) 128L);
    if ((EIF_BOOLEAN) (arg1 <= tu8_1)) {
    } else {
        if ((EIF_BOOLEAN) (arg1 <= ((EIF_NATURAL_64) 9223372036854775808ull ))) {
        } else {
              printf("Failure\n");
int main (int argc, char ** argv, char **envp ) {
    EIF_NATURAL_64 loc2 = (EIF_NATURAL_64) 0;
    loc2 = (EIF_NATURAL_64) atoll(s);
    buggy_routine ("s", loc2);
}To reproduce:
cc -xO4 bug.c -o bug ; ./bug
It fails on both 32 and 64-bit code generation for x86. I haven't tried on Sparc as I need to install Sun Studio 12. Is this a known issue? Is there an easy workaround?
I tried with Sun Studio 11 and it worked just fine there.
Regards,
Manu
PS: I've tried with both version (the first is the one from the default installation) and the second after I noticed there were some patches available:
cc: Sun C 5.9 SunOS_i386 Patch 124868-01 2007/07/12
cc: Sun C 5.9 SunOS_i386 Patch 124868-02 2007/11/27

An issue filed at bugs.sun.com does not go directly into the bug database. It is evaluated, and if it turns out the report is actually a bug not previously reported, goes into the database. You get a notification and chance to reply after the report is evaluated.
In this case, I picked up your report myself, and filed the bug. The bug ID is 6654314, and will be visible at bugs.sun.com in a day or two.

UPDATE SQL statement has poor performance

Hi All,
We have setup regular run background process,setup to "throttle" user submitted
Batch Requests to Batch Processing System. Purpose of this "Throttle" DB level background
process (submitted using DBMS_SCHEDULER) to check for currently active Requests and
then accordingly (based on prevailing System Load)   inject new requests for Batch Request accordingly.
This background process is scheduled to run every minute.
We find that UPDATE statement below performs well when Table being updated (FRM_BPF_REQUEST)
even when Table has upto 1 million rows. (Expected Production volume) UPDATE takes only few seconds (< 10 secs)
at most to execute
However, we find that when there is a burst of INSERTS happening to same Table (FRM_BPF_REQUEST)
via another database session, UPDATE statement suffers with severe degradation. Same UPDATE which used
to perform in matter of few seconds, takes upto 40 minutes when heavy INSERTS are happenning to
Table. We are trying to understand why Performance gets severely degraded when INSERTS are heavy on the Table,
Any thoughts or insights into issue would be greatly appreciated.
We are using Oracle DB 11.2.0.3.4 (on Linux)
CREATE OR REPLACE PROCEDURE BPF_DISPATCH_REQUEST_SP(V_THROTTLE_SIZE NUMBER DEFAULT 600) AS
--    Change History
--001 -Auro    -10/09/2013 -Initial Version
--    v_throttle_size    NUMBER DEFAULT 600;
      v_active_cnt         NUMBER DEFAULT 0;
      v_dispatched_cnt   NUMBER DEFAULT 0;
    v_start_time    TIMESTAMP := SYSTIMESTAMP;
    v_end_time    TIMESTAMP;
        v_subject_str   VARCHAR2(100) := '';
        v_db_name       VARCHAR2(20) := '';
BEGIN
    -- Determine Throttle Size
    SELECT THROTTLE_SIZE
    INTO   v_throttle_size
    FROM   FRM_BPF_REQUEST_CONTROL;
    -- Determine BPF Active Request Count
    SELECT COUNT(*)
    INTO   v_active_cnt
    FROM   FRM_BPF_REQUEST
    WHERE STATUS IN('rm_pending','rm_ready','processing','worker_ready','failed','dependency_failed','recover_ready');
    IF v_active_cnt < v_throttle_size THEN
        UPDATE FRM_BPF_REQUEST
        SET    STATUS='dispatched'
        WHERE ID IN (
                SELECT ID FROM (
               SELECT ID
               FROM   FRM_BPF_REQUEST
               WHERE STATUS='new'
               ORDER BY ID
                ) WHERE ROWNUM <= (v_throttle_size - v_active_cnt)
        v_dispatched_cnt := SQL%ROWCOUNT;
        COMMIT;
    END IF;
     v_end_time := SYSTIMESTAMP;
    INSERT INTO FRM_BPF_REQUEST_DISPATCH_LOG
    VALUES (
        v_start_time,
        v_active_cnt,
        v_dispatched_cnt,
        v_end_time,
        NULL
    COMMIT;
    EXCEPTION
              WHEN OTHERS THEN
            ROLLBACK;
         v_end_time := SYSTIMESTAMP;
        INSERT INTO FRM_BPF_REQUEST_DISPATCH_LOG
        VALUES (
            v_start_time,
            v_active_cnt,
            v_dispatched_cnt,
            v_end_time,
            NULL
        COMMIT;
            SELECT ORA_DATABASE_NAME
        INTO   v_db_name
        FROM   DUAL;
               v_subject_str := v_db_name||' DB: Fatal Error in BPF Request Dispatch Process';
        -- Alert Support
            DBA_PLSQL.SEND_MAIL(P_RECIPIENTS     => '[email protected]',
                                    P_CC         => '[email protected]',
                                        P_BCC         => '[email protected]',
                                        P_SUBJECT         => v_subject_str,
                                        P_BODY         => SUBSTR(SQLERRM, 1, 250));
END;
show errors
Thanks
Auro

What the heck is this:
EXCEPTION
              WHEN OTHERS THEN
            ROLLBACK;
         v_end_time := SYSTIMESTAMP;
        INSERT INTO FRM_BPF_REQUEST_DISPATCH_LOG
        VALUES (
            v_start_time,
            v_active_cnt,
            v_dispatched_cnt,
            v_end_time,
            NULL
        COMMIT;
            SELECT ORA_DATABASE_NAME
        INTO   v_db_name
        FROM   DUAL;
               v_subject_str := v_db_name||' DB: Fatal Error in BPF Request Dispatch Process';
        -- Alert Support
            DBA_PLSQL.SEND_MAIL(P_RECIPIENTS     => '[email protected]',
                                    P_CC         => '[email protected]',
                                        P_BCC         => '[email protected]',
                                        P_SUBJECT         => v_subject_str,
                                        P_BODY         => SUBSTR(SQLERRM, 1, 250));
Why are you programming for failure to succeed, willing to accept time taking rollbacks, committing afterward, fooling with transactions, swallowing/hiding all errors, all that 'nice and safely hidden' in the notorious WHEN OTHERS exception NOT followed by a RAISE?
Only catch errors you expect.
Programming to let a program fail is to fail.

Cannot see my printer after install wrong firmware

i have a problem
my printer (laserjet cp1525n color) give me a message firmware corrupted ready 2 download
i tried to install the firmware but the printer stuck on erasing proccess
and i noticed that the printer represent as laserjet 3020 on device and printer window on my computer
after that i installed firmware for the printer laserjet 3020 on my printer laserjet cp1525n color
i noticed that the update firmware completed and then i restart the printer
but nothing appear on printer screen
and i cant detect the printer when i put usb cable
please help me

Hello @A-joudeh,
Welcome to the HP Support Forums!
I understand that while attempting to update the Firmware on your HP LaserJet Pro CP1525nw Color Printer you ran into issues and ultimately ended up loading the commerical HP Laserjet 3020 All-in-One Printer firmware on your consumer HP Laserjet Pro CP1525nw Printer. In doing this you have corrupted your printers programming. Unfortunately, when this occurs you are left with a unresponsive product that will need to be replaced.
At this time, due to the programming hardware failure of your product I recommend that you contact our Technical Support queue by phone to explore additional replacement options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
I wish you luck. Have a Happy New Year!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Database Toolkit - Get Database Information

Hi All,
I'm struggling a bit with this toolkit, and thought I'd bring it up on here for some input.
Using the included functions with that toolkit, I'm able to connect to my database, but i'm having trouble writing to it (Error -2147217913). I'm a bit concerned that maybe my data types don't match, so in order to confirm, I noticed in the examples given with this toolkit there was a VI that gets your database information (Column names, tables, most relevant - data types per column name.). Something odd happened that I'm not sure if its supposed to:
I changed the UDL address of the example database, to my database's UDL...nothing else, just to get a list of datatypes. Now using their UDL it finishes cleanly, w/no error. With my UDL - I receive Error -2147217900 occurred at Conn Execute.vi->DB Tools List Columns.vi->Get Database Information.vi. Interesting eh? But it does show every column name/and data type, wonder why it fails though?
Anyone have some recommendations of how to troubleshoot next? Or how to interpret this? I'm betting if I can figure out why its failing in the example program, both failures are maybe tied together?
LV7.1, LV8.5

Hi Aashish!
Good news, figured out the problem...I WAS writing a null to the database (by accident), and while access doesn't mind them - the toolkit is based on SQL standard which i believe does. The program had a cluster that was being initialized, and fed into a loop where it waited for user action. (So we didn't have left over garbage in each field whenever the app ran.) Once the user input all their data, that same wire was fed into the input to populate the array. I thought it would update the cluster as the controls were changed, but I guess the only way to change elements is to unbundle, change and rebundle. (At least thats how it behaves)
Appreciate the help, but while on the topic maybe you can give me a pointer, the only way I could work it so a fresh copy of the data was sent into the cluster, was to make a local variable of the cluster and wire that to the input (See picture). Rather than get yelled at later if I need more help, any idea how to reduce that local so we don't require a duplicate copy of the data? (avoid race conditions, etc.) Or would you even? Guess it boils down to, is there another way to update the cluster in there? I can unbundle, and rebundle, but I'm not sure what I'd do between the two to update all those to feed into the database...its a bit confusing to describe but I think it gets the idea across lol.
I was thinking about a way to do it...and thought maybe I need an indicator for each control, then when the indicator changes, feed that into the control cluster to update from intial and go from there...but thats a copy of data the same size as the local would make, I'd think.
LV7.1, LV8.5
Attachments:
Working method.JPG ‏147 KB

Transfer purchase requisitions to SRM 5.5 from ECC 6.0

We have an issue with our program BBP_EXTREQ_TRANS to copy our pur requisitions to SRM 5.5 (setup as Extended Classic scenario) but it blocks weekly. We cannot identify a root cause for this - sometimes there is no error log via tcode SLG1 or most recently, it is "Business partner cannot be changed" on a new purchase requisition.
Does anyone know what this error message is trying to tell us and how to solve this?
Edited by: Mike Yuen on Jan 21, 2010 8:33 AM

Hi,
Can you please check the ststus of Purchase Requisition in ECC whether it is released or block.This will not allow you to transfer the PR to SRM system.
Thanks,
AMIT

Job gets stucked

Hello all, I have the following issue with a Replication Job that connects to several DBs trough DB links... so the problem is when this job goes to a remote database which connection is really slow and disconnects a lot... so the job keeps trying to connect or something but it basically gets stucked there in that DB and doesnt go to the next one...
so I know that one solution is to improve that connection between the central DB and the remote one, but my concern is if this happens with another one and so.
My question then is how can I control or create a timeout so when the job doesnt get the data in certain amount of time it fails to the next DB?
thanks

well to be honest I don't any idea how those windows work and how they will fix the issue of the job getting stuck.. what I read it is related to allocation of resources but not sure, could you explain me plz.
Something else I would like to add is, when I notice that the job is stucked I try to do an Orakill of the job process number, I get that info with this query
Select spid thread ,osuser, s.program ,job,failures,last_date,this_date
From v$process p, v$session s, dba_jobs_running j
Where p.addr=s.paddr
And s.sid=j.SID
I do the following:
1-place job offline.
2-execute orakill on server
3-drop the job and recreate it.
but the funny thing is that right after I execute the orakill the process starts again Ithink but with another thread number so I cannot drop the job. when this happens I have to take de database offline and back on but I dont like doing that...

Two DAQMX tasks at the same time

Hello!
In my program there are two tasks, which should run at the same time. The problem is, if i start my program the failure 50103 occurs. It says, that the resource is reserved.
I haved searched on the ni site for this failure, but the descriptions haven*t solved my problem.
Could somebody help me??
TNKS
peter
Labview 7.1 on Windows 2000
Attachments:
Messung.vi ‏333 KB

hi!
in the automation explorer i defined a task with both channels. the DAQMX-read.vi generates only one dataline and how can i detect the two separate signals??
i thought, if i have a task with two channels, the Daqmx-read.vi would generate an array ( two channels --> two datalines ???
best regards
peter
Labview 7.1 on Windows 2000

Battery failure although my battery doesn't fit the exchange program?

hello there!
i know there have been a lot of threads about the battery life and failures in the macbook pro but i don't know which one fits my case...
my mbp is a week 13 and has no problems at all. i don't use the battery that often - by now i have 14 cycles.
my battery's serial number doesn't fit the exchange program but today happened this odd thing:
i used my mbp on battery for less than two hours and the battery symbol said that i still have about 50 minutes of battery power. all of a sudden it turned off (as described in many other threads) without any warning and i couldn't turn it on without plugging in the power cable. when i turned it on it started from deep sleep mode (dimmed desktop).
...of course i did reset the pram and stuff - but what is going on? as i said i don't meet the exchange program for faulty batteries but still it doesn't seem to work proper.
what can i do?
thanks in advance, guys!
j.

hi and thank you all for your replies so far!
over the weekend i took some screenshots showing the various total of mAh. i have no idea if that is normal like this? and the battery is behaving normal again, no random shutdown... you can find the images under the following link...
http://www.propaganda-pixel.de/mbp/mbp.htm
in addition i added a photo of my magsafe... now that it comes to the battery issue i got slightly concerned if this crimpy cord should be like this (not that this thing starts to melt on me!).
when i transport my mbp i wind the cord around those two hooks and i never pull the magsyfe by the cord out. but still it looks like this.
the power cord is from a week 10 macbook pro which i got exchanged for a week 13 but i had to keep the cord...
i know, this has nothing to do with the battery issue and no, i'm not paranoid - just now that i started this thread i thought i could add it...
so my questions are:
- shall i request a new battery considering the various mAh indications?
- shall i request a new power cord? or does mine look normal?
why i ask is because i don't want to request something when there is no need for a replacement.
thank you all!

Program BBP_EXTREQ_TRANS failure

Similar Messages

Maybe you are looking for