Program dcs.sndsap not registered
Hi,
We're in the midst of integrate our SAP with 3rd Party WMS. I've registered the program -id using command:
rfcexec -DSAP_SEND
rfcexec -adcs.sndsap -gHOSTNAME -xsapgw00 &
I've created RFC in SM59 using method T.
I can see the registered program working fine in SMGW. The issue that i'm facing, the registered program process will terminate by it self after few minutes and when I test it via SM59, i'll receive message "program dcs.sndsap not registered". Is there any way that I can investigate why the process terminated? and how could i ensure that the program always registered?
Thanks and Regards
Tarmizee
Hi,
can you go to trace file of work processs and look at the errors(which are in red colour / latest errors).
if u find any difficulties in analyzing those errors related to disconnection or any errors related to ur 3rd Party WMS server in trace files paste those errors here.
Also can u check r u getting any errors in sm21 logs. paste them here, if u need any help on that too.
Also ask your 3rd Party WMS server admin to increase the gate way connection from their end too.
Regards,
Ravi
Similar Messages
-
Program IGS.BW not registered in IGS_RFC_DEST
Hello,
I want to enable Internet graphics display for my BW system for which i have already installed IGS on my system and created RFC Destination as IGS_RFC_DEST and entered relevant parameters,when i test this rfc connection following error message is displayed:
ERROR program IGS.BW not registered
LOCATION SAP-Gateway on host BIWDEV / sapgw00
DETAIL TP IGS.BWD not registered
COMPONENT SAP-Gateway
COUNTER 18
MODULE gwr3cpic.c
Can someone tell me wt might be the possible cause of this error and how to rectify it.Kindly revert at earliest.My Email Id is [email protected]
Thanks,
Saumyaplease ensure all the steps explained in the following link are followed.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
particularly you should use the same program ID used in IGS in the RFC destination.
Regards
Raja -
Hi,
I am on the way of integrating ABAP API in PI 7.1 EHP 1 with MDM 7.1
I installed MDM ABAP API in PI system.
In transaction MDMAPIC, created MDM Server Connection with default port, DBMS Hosts and MDM Repository.
After I did the above tasks, I tested the RFC Connection, But its failed with the following error.
Connection Test MDM_API_GEN_DEFIANCEDEP
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67
Error Details ERROR: program DEFIANCEDEP.MDS not registered
Error Details LOCATION: SAP-Gateway on host DEFIANCEDPI / sapgw00
Error Details DETAIL: TP DEFIANCEDEP.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 87
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1714
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 711
Error Details TIME: Sat Mar 12 13:53:55 2011
Error Details VERSION: 2
Appreciated if replied with the proper resolution at the earliest.
Thanks in Advance
Pradeep ShettyHi Kanstantsin Chernichenka,
Thanks for your reply.
I tried the given suggestion. And even restarted the PI and MDM system.
Still, I am facing the same problem.
My allow.ip file contains
122.183.187.24;
122.183.187.25;
115.242.211.112;
115.184.2.47;
My MDS.ini file contents are
[MDM Server]
XCS Ini Version=1
Accelerator Dir=E:\usr\sap\MDM\MDS02\mdm\accelerators
Log Dir=E:\usr\sap\MDM\MDS02\log
Report Dir=E:\usr\sap\MDM\MDS02\mdm\reports
Archive Dir=E:\usr\sap\MDM\MDS02\mdm\archives
Distribution Root Dir=E:\usr\sap\MDM\MDS02\mdm\distributions
Transport Dir=E:\usr\sap\MDM\MDS02\mdm\transport
Modifications Dir=E:\usr\sap\MDM\MDS02\mdm\modifications
Lexicon Dir=E:\usr\sap\MDM\MDS02\exe\Lexicons\
Extra DBConnection Validation=True
Log SQL Errors=True
String Resource Dir=E:\usr\sap\MDM\MDS02\exe\LangStrings\
Stemmer Install Dir=E:\usr\sap\MDM\MDS02\exe
Wily Instrumentation=False
Wily Instrumentation Level Threshold=10
SLD Registration=True
Skip Unchanged Records=False
Autostart=0
MDS Ini Version=1
RELEASE\UseAssert=True
Tracing Level=3
LogViewer Format Logging=False
LogViewer Format Tracing=False
Trusted SAP Systems=DPI
TrustFiles Dir=E:\usr\sap\MDM\MDS02\config
Max Threads Per Operation=Auto
Lock Account After Failed Password Attempts=5
Lock Account Duration=1800
Minimal Password Length=5
Password Expiration Days=90
Password Expiration Warning=7
Disable Read Access To Corrupt Repositories=False
MDS Scone=
Log SQL Modifications=False
Maximum DBMS Bind Count=512
Oracle\Dll=OCI.DLL
Allow Console to Retrieve Files=True
Oracle Tablespace Files=1
Default Interface Language Code=eng
Default Interface Country Code=US
Client Ping Timeout Minutes=0
Inactive Client Timeout Minutes=30
Value Retrieval Threshold=0
Protect Family Nodes With Locked Data=False
Number Of Stemmers Per Language=2
TrexDllPath=
Import Slice Size=2048
Bulk Import Silo=True
Safe Silo Mode=False
Enable Change Stamp Logging=False
Always Verify DBMS Connection Before Executing SQL Statements=False
Disable Read Access To Repositories That Require Restart=False
Family Retrieval Threshold=30000
Enable Client Dictionaries=False
Restricted Url For Client Export=
Index_Page_Margin=10
Default Slice Size=500
Default Slice Wait Time MS=300
Enable Slicing For Non-Bulk Operations=False
Multithreaded Matching=True
SAP RFC Gateways=
[MDM Server\Databases\MDM_1MDMORCL_5_3_4_3]
Port=2345
Login=SYSTEM
Password+=ES066H2NVHDCFSJ206LJ9I995SLBVSA21OMQPM0
Stemmer Language=
Stemmer Variant=
Valid Keyword Chars=abcdefghijklmnopqrstuvwxyz0123456789
Max Large Text Length=250000
Number of Rows Per Fetch=100
Max Initial MB to Retain=4
Max Send Failure MB to Retain=4
Workflow Detailed Report=False
Mail Server=
Mail SMTP Timeout=1
Here I am requesting you to send your valuable feedback at the earliest.
Thanks
Pradeep Shetty -
Hi all,
The connection in SM59 , type T, with program id is not working. This program id refer to an interface that I developed in PI. I Put another program id in this connection and works. But my program id isn´t works. All Objects in Integration Builder - Configuration is active.
Any Idea???The connection in SM59 , type T, with program id is not working. This program id refer to an interface that I developed in PI. I Put another program id in this connection and works. But my program id isn´t works. All Objects in Integration Builder - Configuration is active.
program id needs to maintain in java stack then it will work. Check with basis people.
Thanks
Siva -
Program AI_RUNTIME_ SID not registered
Hello,
We're doing the post-installation tasks of XI 3.0
We've created the following RFC destinations in the ABAP environment:
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
When we test the AI_RUNTIME_JCOSERVER everything is ok, but we get this error with the other three:
"Error opening an RFC connection" and in the detailed error I get this --> "TP AI_RUNTIME_AAA not registered"
If anyone can help with this we´ll be very glad
PabloWe ran into this issue on a new XI system install and discovered that the SAP role that was assigned to SAPJSF (or PI_JCO_RFC) had not been generated yet. The role in question was SAP_BC_JSF_COMMUNICATION_RO. After our Security team generated the role - the install procedure worked as documented.
FYI - we pulled the RFC authorization issue from the Visual Administrator log on UNIX. -
Error 'Program not registered' while testing RFC - SRM to MDM / TCP/IP conn
Hello All,
While testing RFC connection in SRM, we are getting this error. This connection between SRM to MDM. Any inputs will be highly appreciated.
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgw<instance no>
our server OS : windows 2008 server
We are getting error while doing connection test in SRM.
This is sm59 connection (TCP/IP ) connection.
Connection Type: T / RFC destination Name: MDM_API_CATALOG
Registered server program: hostname.MDS
I checked smgw transaction ..Logged on clients...Program id is not showing. Any hint will be helpful.
I Checked this MDM setup also.
MDS setup
In mdm server go to folder F:\usr\sap\DM1\MDS00\config
Open MDM.ini file in notepad
Add the below 2 entries.
SAP RFC Gateways= GWHOST=XXXX.hostnamexxx.xxx GWSERV=sapgw00
Trusted SAP Systems= XXD
This will enable gateway connection between SRM and MDM and will enable trusted connection.
For trusted connections to work, we created a service user called SRM_MDM_API with SAP_ALL in SRM and also created the same user in MDM with Default role.
Error message:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program XXXXXXXXPRD.MDS not registered
Error Details LOCATION: SAP-Gateway on host XXXXXXXXprd.xx.xxxxxxhostname.xxx / sapgw00
Error Details DETAIL: TP XXXXXXXXPRD.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 77326
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME:
Error Details VERSION: 2
Procedure Tried
1) This procedure is for Linux OS - Similarly we tried in Windows OS ( If any procedure is wrong also, Please correct us)
To register the program login into the OS level as sudo su u2013 <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
2)
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su u2013 <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
In order to do above step 2, we could not find saprfc.ini in windows 2008 server. Please let us know path where it will be usually?
3) Already checked the notes sapnote_0000684841
I know that it is generic error..This is happening to specific one of system only.
Thanks
Edited by: saptest2011 on May 20, 2011 5:36 PMHello SM,
Thanks for your quick reply.
Thanks for sharing link for document ie Configure the MDM Administration_cockpit. It is helpful. I read that document.
But still issue remain there.
The same RFC connection works between SRM sandbox to MDM sandbox.
Only issue with SRM Prod to MDM Prod (newly built system)
difference between MDM Prod and MDM sandbox.
MDM Prod runs: Windows server 2008 OS
MDM Sandbox runs: Windows server 2003 OS
Landscape: PI7.1, MDM 7.1 and SRM 5.5, SRM-MDM Catalog 3.0
Even i did os01 tcode ping test using host name (specific IP address) from SRM prod to MDM prod, it is fine.
Thanks a lot for your help.
I checked these notes also
Note 353597 - Registering a server program
Note 44844 - No connection to registered RFC program
Note: in smgw tcode in SRM system, the required program id is not showing in logged on clients
Thanks
Edited by: saptest2011 on May 23, 2011 5:00 PM
Edited by: saptest2011 on May 23, 2011 5:39 PM -
I get the following error when I test an RFC;
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program BIS_TR9.TRFC not registered
Error Details LOCATION: SAP-Gateway on host cpsaput1 / sapgw61
Error Details DETAIL: TP BIS_TR9.TRFC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 21389
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Wed Aug 22 16:33:49 2007
Error Details VERSION: 2
The Gateway monitor connections to clients has this entry:
242 cpamhq-sbg04 BIS_TR9.TRFC Registered Server cpamhq-sbg04 10.5.1.141 Wed Aug 22 16:34:39 2007 Connection OK
This is a copy of a previous system on the same server with a different system number. It has support package stack 10 with kernel patch number 121.
Thanks,
JoeHello Joe,
From the error logs I can make out two things.
Your SAP resides on cpsaput1 while external program resides on cpamhq-sbg04 .
Now you have done a system copy on cpsaput1 from a SAP system which was connecting fine to the RFC. That connection was going through because SAP details for the old server were correctly maintained at cpamhq-sbg04 but the same has not been done for cpsaput1 . Ask the adminsitrators for cpamhq-sbg04 to make settings for cpsaput1 and then try RFC again.
Regards.
Ruchit. -
Sap to non sap connection ( program not registered/cpic-call
Hi all,
Im trying to connect sap to siebel system.IN TCP/IP connections iv selected register program id & passed the parameters ...program id,gateway host and gateway service
i followed michal krawczyk steps & also checked in smgw
transaction also but program id is not registered there
im getting error like program sapprog not registerd cpic/call
<b>Detailed error</b>
<b>Error</b> - program sapprog is not registsred
<b>location</b> - sap gateway on host saple / sapgw01
<b>detail</b> - Tp sapprog is not register
<b>component</b> - gateway
<b>counter</b> - 387
<b> module</b> -gwr3cpic
<b>line-</b> 1621
<b>return code</b> - 679
<b>subrc</b> - 0
please try to help me out in this issue. all inputs r rewarded.
Regards,
LavanyaHi
Thanks prince,iv checked entries in sm59, i checked smgw tranaction(gateway monitor) for logged on clients
its showing like this
number/luname/tpname/sys.type/hostname/hostaddres/last req
0 /sapnav/sapgw00/local_r3/sapnav.sapdomain.com/192.158.3.219
if i double click on above...
read/write socket = 4
handle = 4
time = tue jan 26 16:54:13 2006
socket = 1652
stat = ni_connected
type = stream ipv4
out = 1122 messages 64 bytes
in = 1 messages 64 bytes
local =127.0.0.1:3300
remote = 127.0.0.1:1848
options =
lu = sapnav
tp = sapgw00
lon lu = sapnav
long tp = sapgw00
ext program = 0
no conversation = 24
appc version = 6
hostaddr[0] =
hostaddr[1] = 127.0.0.1
offset in = 0
timeouts in = 0
connected = tue jan 24
last req = mon jan
request block number in= -1
connection out = -1
target out = -1
offset out = 0
restlen out = 0
timeouts out = 0
request block number out = -1
accept info = einfo
snc forced = 0
<b>just see gateway monitor 4 sapnav/parameters & attributes</b>Profile
parameter Value
gw/max_sleep 20
gw/conn_disconnect 900
gw/conn_pending 60
gw/gw_disconnect 1800
gw/req_stack_size 30
gw/max_conn 500
gw/max_wp 0
gw/max_conn_per_wp 10
gw/cpic_timeout 20
gw/deallocate_timeout 600
gw/reg_timeout 60
gw/reg_lb_level 1
gw/reg_lb_default 20
gw/side_info C:\usr\sap\D01\DVMGS00\data\sideinfo.DAT
gw/sec_info C:\usr\sap\D01\DVMGS00\data\secinfo.DAT
gw/startup C:\usr\sap\D01\DVMGS00\data\gwstartup.DAT
gw/stat 0
gw/tcp_security 1
gw/cpic_security 1
gw/max_sys 300
gw/max_shm_req 50
gw/max_shm_req_per_conn 10
gw/max_overflow_size 5000000
gw/max_overflow_usage 10
gw/keepalive 300
gw/reg_keepalive 300
gw/compatibility 0
gw/monitor 1
gw/netstat_once 1
gw/close_routes 120
gw/timeout 0
gw/internal_timeout 0
gw/nitrace 0
gw/accept_remote_trace_level 1
gw/resolve_timeout 0
rdisp/max_gateways 100
rdisp/max_comm_entries 500
rdisp/sna_gateway sapnav
rdisp/sna_gw_service sapgw00
rdisp/TRACE_LOGGING OFF
gw/rem_start REMOTE_SHELL
gw/remsh rsh
exe/gwrd C:\usr\sap\D01\SYS\exe\run\gwrd.EXE
snc/enable 0
snc/permit_insecure_start 0
Attributes
Release 640
Release no 6400
internal version 2
start time Tue Jan 24 16:53:47 2006
build time Aug 17 2004 23:33:51
build with Unicode TRUE
build with Threads TRUE
gateway hostname sapnav
gateway service sapgw00
req_sync_limit 24
appc_ca_blk_size 34396
gwreq_ln 34588
appcdata_ln 34316
overflow_size_limit 500000
overflow_use 0
trace level 1
trace level external programs 2
PID Gateway Reader 4952
internal version 2
Shared memory Sizes in bytes
CONN_TBL entry 1748
CONN_TBL total 874000
STATISTIC area 1392
iv changed some values for my safety.plz check it and let me know the error to register program id. Hope ull solve my issue this time.
Thanks in advance,
Lavanya. -
Program not registered - RFC to J2EE (local machine)
I have a local install of WAS on my laptop using MSSQL 2000. I am trying to integrate local portal into a BI system.
1. I completed SLD configuration of local J2EE
2. As part of local SLD config I specified a BW7 system as data supplier
- entered BW7 host & gateway
- kept default settings for "configure data supplier targets" (i.e: sld/active=TRUE)
3. In Visual composer I successfully triggered SLD data transfer
4. In Visual Composer I specified a JCo RFC Provider to the BW7 system I want to access.
5. If I go to BW7 and goto tcode SMGW -> GOTO -> Logged on client, I see 2 pair of entries for JCo RFC provider
with the following settings
- system type: Registered Server (REGISTER_TP)
- state: connected
- LU name & Host Name = J2EE Host name w/ last 4 characters truncated. Only first 8 characters appear.
- TP Name: 2 entries = SLD_UC & 2 entries = SLD_NUC. So a total of 4 connections. My understanding is that TP Name is supposed to = Registered Server Program
6. In BW7, I have an RFC w/ Registered Server Program setting and program ID = JCo RFC Provider program ID
7. In BW7 RFC & JCo RFC the host & gateway settings are the same, they both refer to the BW7. THIS IS THE PART WHERE I AM UNSURE. I would have thought that the host & gateway settings of BW7 RFC would refer to Local J2EE engine. AND I DON'T KNOW WHAT THE GATEWAY IS FOR LOCAL J2EE.
8. In BW7 when I try to test the RFC, I get errors:
- Logon Connection Error
- program <...> not registered / CPIC-CALL: 'ThSAPOCMINIT' Tran
- ERROR: program <...> not registered
- DETAIL: TP <...> not registered
- COMPONENT: SAP-Gateway
- MODULE: gwr3cpic.c
- RETURN CODE: 679
- SUBRC: 0
- RELEASE: 700
- VERSION: 2
9. I completed step 1 & 2 of RSPOR_SETUP
- Step 1 <Create RFC Destination in J2EE engine> messages:
No Authorization to SMGW
Profile parameter login/create_sso2_ticket is not set to 2
Check of RFC destination <...> with RFC_READ_TCPIP_DESTINATION successful
- Step 2 <Create RFC destination to Portal> messages:
No Connection
Option Send SSO tickets not active (see documentation)
RFC CALL RFC_PING, destination <...> failed with sy-subrc =2
There a little something missing. Hope u gurus can help, lost a weekend over this.Hello,
we get the same message (program ... not registered, COMPONENT: SAP-Gateway) in sm59, when checking the TCP/IP connection. We got it, after we changed the user name in the Visual Administrator.
Does anyone know with which tool and where the program can be registered. (The connection has no user name (connection by SAP ticket)).
Best regards,
Thomas -
Program IGS. SID not registered in IGS_RFC_DEST
Hi all,
I want to enable Internet graphics display for my BW system for which i have already installed IGS on my system and created RFC Destination as IGS_RFC_DEST and entered relevant parameters. When I test this RFC connection, the following error message is displayed:
ERROR program IGS.BWA not registered
LOCATION SAP-Gateway on host SAPDEV/ sapgw22
DETAIL TP IGS.BWA not registered
COMPONENT SAP-Gateway
COUNTER 96
MODULE gwr3cpic.c
LINE 1609
RETURN CODE 679
SUBRC 0
RELEASE 640
TIME Wed Dec 27 14:12:54 2006
VERSION 2
The IGS is up and running including the PORTWATCHERS and the HTTP port. I tested it out using the http://IGSHOST:LISTENERHTTPPORT. I can see entries under the headings REGISTERED_PORTWATCHERS and REGISTERED_INTERPRETERS.
The program I am using in the RFC connection is the same I have given in "igs.xml" file in the ./conf directory.
Can someone tell me wt might be the possible cause of this error and how to rectify it?
Thanks
AbhiHi Abhi,
please make sure that the entry for the program ID in igs.xml must match exactly the one in IGS_RFC_DEST (case sensitive). As I guess that your IGS is integrated within Web AS make sure that the gateway host and gateway service in IGS_RFC_DEST are empty.
Please also refer to note <a href="http://service.sap.com/sap/support/notes/454042">454042</a>.
Regards
Matthias -
SAP SM59 Connection - Program Not Registered
I created the SM59 in the SAP system and did the basic install using the BO Integration Kit XI release 2 on a Windows system.
On the test using the SM59 I am getting:
ERROR: program AERSND02_BO_SB2 not registered.
AERSND02_BO_SB2 is the program ID I used in the BO install and is the program ID I used in the Registered Server Program in the SM59. The SAP system is a unix box and the BO system is on a different windows box.
Also, When I execute the rfc_ping se37 program I get "Communication Failure".
In the BO system tab "SAP" I can see the roles in my SAP system so the connection to the SAP system is functioning.
Points awarded.
MikeMuhammad, its helpful.
Trying to configure BW Publisher.
I verified that:
1) BW Publisher has been started in windows.
2) I executed netstat u2013an | find u201C3306u201D and see valid responses:
xxx.x.xx.xx:2940 xxx.x.xx.xy:3306 ESTABLISHED
xxx.x.xx.xx:3354 xxx.x.xx.xy:3306 ESTABLISHED
This was promising!!
3) My sm59 has valid values per the doc
4) My sm59 gives me the following error response:
ERROR: program mybox02_BO_XX2 not registered
LOCATION: SAP-Gateway on host aersnd02.dcs.eis.lmco.com / sapgw06
DETAIL: TP mybox02_BO_XX2 not registered
5) The following link http://help.sap.com/saphelp_nw70/helpdata/EN/22/042652488911d189490000e829fbbd/frameset.htm shows:
Activation Type Registration
If the activation type is Registration, you have to identify a registered RFC program. With an SAP gateway, you can register an RFC server program under this ID and then wait for RFC calls from other SAP Systems.
Example entry name: SERVER_EXEC
6) When I run sapinfo.exe dest=bin I get:
SAP System Information
Destination mybox01
Host mybox01
System ID (extern)
Database
DB host
DB system
SAP release 640
SAP kernel release 640
RFC Protokoll 011
Characters 1100 (NON UNICODE PCS=1)
Integers LIT
Floating P. IE3
SAP machine id 560
Timezone
When I ran this sapinfo.exe to get the connection registered (using type=R) you can see that it did not get registered.
Since the sap system is on unix and bo on windows I'm thinking that I need something on my sap system box pointing back to bo.
Anyone been here b4? Points rewarded !!
Edited by: Michael Hill on Jun 6, 2008 9:16 PM -
KABA connection issue - program not registered
I am trying to troubleshoot a connection error between SAP and KABA. I have the RFC created in SAP and when I test the connection I get a program not registered. The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating). We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error. Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP? Any assistance would be appreciated.
Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor. -
Gateway error - Program not registered
Hello,
We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
LOCATION SAP-Gateway on host gisrxx / sapgw00
ERROR program SBCX not registered
It's an ECC 6.0 system.
I found SAP note - - 353597 - Registering a RFC program
I executed the following command as sidadm
rfcexec -aSBCX -ggisrxx -xsapgw00
But the command keeps on running on teh command prompt.
And for that duration the RFC works.
But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
Could you tell what needs to be done to resolve this issue?
Regards,
Gautam.Hi Gautam,
Please run the program in background (Unix) or as a service (Windows).
Please go through the following forum post. This should help.
Run rfcexec as service on windows
Br,
Venky -
RFC : Transaction Program not Registered
Hi Folks,
We have registered the server program from the middleware onto SAP R/3 System and is successfully registered as per the logs. As a next step, we have logged into R/3 System, SM59, in the RFC destination (Type TCP/IP) after specifying the registered program, we have tested it(Connectivity test). The test is positive and connectivity is established successfully.
The solution was working for months and suddenly connectivity is broken.
To restore the connection, we have repeated the steps, registered the server program, tested and everything is fine.
But when we have pushed a new message, then onwards the RFC destination shows an error. "TP is not registered", Return Code 679. That is when the first message is pushed, it is de-registering the server program and running into error. All the messages got stuck in SM58 with status 'Error when opening an RFC connection'.
RFC trace shows
ERVER> Caller transaction code: (Caller Program: SAPLQOWK)
ERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered.
Please let me know for any inputs.
Thanks, SurajMy problem got solved. In the middleware, when TRFC connection is made, it has created a lock entry during the time, system was brought down for maintenance activity. When the system is brought up, then as the connection lock entry is available, then it deregistered the server program and not able to establish further connection.
To resolve the issue, we have just deleted lock file and registered server program from middleware. This time the connection was established successfully and could able to restore the message flow.
Thanks, Suraj -
TREX7.1 - Program not registered
Hi to all experts,
I am implementing TREX7.1 revision 36 (latest) which is standalone, but I encountered the error - program not registered while creating the RFC connection in admin tool. Previously the connection was working but it happens when I switched the RFCSERVER to "single thread (all hosts), deleted the old RFC connection and recreate the new one.
I have tried the following methods:
1. removed TREX and reinstall it again.
2. executed rfcexec u2013g<program id> -a<gateway host name> -x<gateway service> (it seems like nothing has been changed) - I registered it in SAP server, am I correct?
Thanks in advance.
BR,
NancyHi to all experts,
Problem solved once i restarted the SAP server and recreated the RFC connection in TREX server.
Another issue now, when i run the "python runInstallationTest.py", error occurs as below:
--> Check 01: Ping TREX Services
++----
++----
++----
STEP ³³ ACTION ³³ SPECIFICATION ³³ RESULT
++----
++----
++----
++----
++----
++----
Traceback (most recent call last):
File "/usr/sap/TX1/TRX01/exe/python_support/testbase.py", line 709, in run
ret = self.runHandler(*rest, **self.extractInheritedArgs(keys))
File "runInstallationTest.py", line 710, in runHandler
TREX_SHOW_STOPPER, webserver_unreachable, IS_QUEUE_SERVER = ps.ping()
File "runInstallationTest.py", line 275, in ping
services = HostPort4Services().getHostPort4Services()
File "runInstallationTest.py", line 88, in __init__
self.srvs = Services().getServices()
File "runInstallationTest.py", line 69, in getServices
content = Content('TREXDaemon.ini')
File "runInstallationTest.py", line 33, in __init__
self.content = self.getContent()
File "runInstallationTest.py", line 42, in getContent
raise RETURN_CODE(2, msg=msg)
RETURN_CODE: RC_NO_SETTINGS
No SAP_RETRIEVAL_PATH set in environment.
---> TEST ABORTED !!!
Is this test run very important? Any idea what is this problem about?
Many thanks in advance!
BR,
Nancy
Maybe you are looking for
-
Scanned in - Iphoto doesn't read...
I'm new to Iphoto and wanted to make a book for my mother in law's birthday. So I scanned in a bunch of photos to Iphoto library - they appear and are RGB .jpgs - but they don't show up. Then I tried to import and it said unreadable format so I saved
-
Hi All, We have added resource in Project Managers group and onwers group , but still the resource name is not populating in Owners field when we are creating the project. Please help... Thanks, Rose
-
Quick start guide for WL Portal 10.0 required
Hi all, I am new to BEA WebLogic Portal but have a lot of experience on open-source portal frameworks. After downloaded a copy of the latest 10.0 version I want to have a try how it looks like. What I want is a quick start guide which will answer the
-
Has anyone experienced this? Why is my subscription expired? I have six days left to update my payment information, but there is no way to do so...
-
Latency when 5 apple TV is connected in a Single network
Hi, I am thinking of setting up 5 apple tv in a single network. Each apple tv is connected to a HD TV display the streaming from a specific iPad. Wonder if the display on the tv will be laggy. Thank in advance,