Program does not break at breakpoint inside stored procedure

I am using VS 2013 and SQL Server 2012 calling a stored procedure from a C# program. I have a breakpoint set inside the stored procedure, however execution does not stop on it. When my program is running, the breakpoint is hollow (not solid red) and the
tool tip reads "the breakpoint will not currently be hit. No symbols have been loaded for this document".
I built my app in debug mode and checked "SQL debugging" in the debug tab.
Any idea as to what would cause my breakpoint to not work?
Thanks!
-A

Hi achalk,
When debugging SQL Server stored procedure in Visual Studio 2013, please make sure that Application Debugging is selected in "SQL Server Object Explorer", otherwise you will not be able to step into T-SQL.
There are similar articles for your reference.
Debug SQL Server 2012 Stored Procedure in Visual Studio 2013, Step by Step
http://database.ca/blog.aspx?blogid=10
How to debug SQL Server T-SQL in Visual Studio 2012
http://stackoverflow.com/questions/12016417/how-to-debug-sql-server-t-sql-in-visual-studio-2012
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Similar Messages

ExtendScript Toolkit does not break on breakpoints

For some unknown reason most of the breakpoints are turned off when running a script.
Clearing the preferences did not solve the problem.
Any suggestions?

Hello.
Is breakpoint mean red point in left gutter?
when I want to create breakpoints, always use this.
$.bp();
or
$.bp( /*statements*/ );
ex). $.bp( i%3 === 0 ); // break if "i" is multiple of 3
mg.

JCOP Tools 3.1.1b: Debugger does not break, what am I doing wrong?

Hey everybody
I'm desperately trying to debug applets using the JCOP Tools 3.1.1b but when I start the applet in debug mode, the debugger does not break on the breakpoints I set. You might know the little ticks that appear on top of each breakpoint bullet in the editor. The strange thing is that these ticks do not even appear.
I tried various versions of eclipse (3.1.0, 3.1.1, 3.1.2) and WinXP as wells as Linux. Does anybody else have the same problem or even a solution?
Thanks
Jonas

hello,
here are few steps you should check:
- when you start the debug session JCOPShell will load the applet into the simulator. You have to first make sure the applet is loaded with debug info. JCOPShell should do that by default, but check on the trace that "upload" command is called with the -d option:
upload -d "G:\glut-wks\JC\bin\helloworld\helloworld.cap" - then JCOPShell will install the applet with the "install" command. At that stage only the install function (and of course the constructor of the Applet) will be called. So breakpoints located in other part of the code won't break. Check the trace because if install is not called no applet code will be running.
- after installation, applet must be first selected to get any of its code running. Use "/select |appletname". If you have a breakpoint at the beginning of the "process" method, it should break. if the Applet is not selected all future APDU will go to the cardmanager, and applet code won't be running.
hope this help :)
E.

The completed program does not stop by itself.

I am writing a simple vi to run a loop and also I am writing a few commands outside the loop. I am using a flat sequency structure inside a while loop. I am also writing a few commands oustide the while loop in another sequence structure box adjacent to it.
The progrm executes and does exactly what I want, but the program does not stop running and the run button remains pressed. So because of this, when I call this VI in a bigger program the bigger program hangs when it calls the sub VI as the sub VI is not finishing. I tried using the STOP button, but when I do this, even the bigger program stops executing at this step.
Is there any way I can stop this subVI alone.
Thanks,
Vijay

Your vi has race conditions written all over it. You local variables are all over the place. There is no guarantee which will happen first, the variable gets written to, or the variable gets read. You should learn the concept of data dependency execution flow. Use wires instead of local variables. Use Error In and Error Out to create the execution order. Look at the attached vi, which is a modification of your vi. Also, if the loop exit conditions are never met (Vout is never less than 0.01 or Vin is never less than 2) then your loop will never exit. You might want to check if these conditions will actually happen, or put a stop button to manually stop the loop and wire it into an OR function with the other conditions.
- tbob
Inventor of the WORM Global
Attachments:
UVLO[1].vi ‏44 KB

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

On Creative Cloud,Photoshop CC Trial (or any other Adobe programs) does not download , States "Download error Press Retry to try again... (49)". How can I resolve this?

On Creative Cloud,Photoshop CC Trial (or any other Adobe programs) does not download , States "Download error Press Retry to try again... (49)". How can I resolve this?

Try logging out of the CC Application and restarting your computer. Also, try running the CC app as an administrator.
Benjamin

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field.

Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?

I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?

Contact support if you have serial number issues. Otherwise start by checking this stuff:
Sign in, activation, or connection errors
Mylenium

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

I just signed up for a subscription to adobe reader paying EUR 24.40. The program does not work, and I can not even go to my personal page .... help ...?

I just signed up for a subscription to adobe reader paying EUR 24.40.
The program does not work, and I can not even go to my personal page .... help ...?

Adobe Reader is free; it does not require a subscription.
Did you subscribe to an online service like ExportPDF, PDF Pack, ...?
What exactly does "not work" mean?

The RFUMSV50 program does not generate transfer lines of deferred VAT

Hello;
The RFUMSV50 program does not generate transfer lines of deferred VAT ,
The context is the following one:
Code VAT Created with code target VAT, general account of VAT also created,
Rule of deferred VAT created and activated for the company code in question, with marks to compensate for check.
The data of tests are the following ones:
Creation of an invoice via the FB60,
Integral payment of the invoice via F-53,
Creation of the confirmation of the operation in bank via the manual statement FF67,
Clearing of the intermediate banking account with the bank account via F-03.
After all these elements, by executing the RFUMSV50 program, I have nothing in result.
There somebody who had the same problem, could help us?
Thank you.

Hi
Service Tax credit cannot be utilized unless the Vendor Invoice is Paid. This is the reason till the payment is done the service tax Amount will be accumulated in deferred tax account and once the invoice is paid the balance in deferred tax is need to be transferred to respective Service Tax , Educational Cess and higher Education Cess account. There can be various business scenarios for full and Partial Payment to facilitates the transfer of such deferred balance to respective account SAP has come up with some new standard program RFUMSV50 instead of RFUMSV25. To overcome the limitation of this program i.e. not able to take care of more than one tax line item, below the solution is provided with scenarios “Full Payment is made to Vendor Invoice”.
hope this is help ful
thanks
Trinath

What are the points which the migration program does not support?

Hi,
I have a question about migration program 'RSEC_MIGRATION'.
As described in 'Running the Enterprise Data Warehouse',
in 'Frequently Asked Questions - Business Intelligence in SAP NetWeaver 2004s',
this program supports about 80% automatic migration
according to some documents.
What is the rest 20%?
What doesn't this program support?
Though it may be difficult to make a list for that
because settings of authorization objects are various,
I think SAP should list up as many important points
which this program does not support as possible
by using some examples.
If SAP thinks of delivering such a list,
when will it be delivered?
Best regards,
Kaito Hosoyamada

Hi Kaito,
this statement relflects the fact that a program will never be able to handle all potential complex scenarios that customers might have.
The facts that are not completely covered by the migration assistant are:
1.) The more complex the existing authorization concept, the more manual migration work might be necessary
2.) Customer-exit variables for 0TCTAUTHH cannot be migrated; the respective hierarchy nodes must be assigned manually
3.) Intensive tests are highly recommended
Cheers
SAP NetWeaver BI Organisation

The extraction program does not support object 0MAT_PLANT

Pessoal alguém já passou por este problema?
Estou tentando fazer um delta no objeto 0MAT_PLANT, mas me retorna sempre este erro.
Já fiz um novo Init, mas o erro continua.
The extraction program does not support object 0MAT_PLANT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0MAT_PLANT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.

Hi Eduard ,
You can try the following steps to solve that
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init Request for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
the Init Request
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
Hope it solves your problem, if not pls let me know.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence

The extraction program does not support object 0JOB_ATTR

HI all,
I'm getting the following error when execting 0JOB_ATTR extractor in R/3 system (via RSA3):
The extraction program does not support object 0JOB_ATTR
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0JOB_ATTR.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I've found various threads with this error (or similar ones), but none of them are solved (or not published solution). Haven't found any SAP notes yet either, so any input would be very helpfull.
Thank you.
G.

0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
I have sent a message to SAP asking for the solution . Below is the reply what they gave.
"This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
If no data is being extracted please do the following:
If you have data in HRP5050 and still do not get any data please try the following :
1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
2) Replicate the Data Source to BW
3) Activate the Info Source again.
4) Delete any previous delta initializations for the datasource.
5) Initialize the delta again
6) Try to load data".

Program does not break at breakpoint inside stored procedure

Similar Messages

Maybe you are looking for