Program for profit centre determination

Hi,
profit centre is determined in sales order. How does it gets determined techincally. through some function module or what ??
regards
sachin

hi, that is ok but what is the trigerring point from the sales order. how  does the sales order program calls the profit centre determination program. what is the tirgerring point from abap point of view. how  does it calls the profit centre program from sales order program
regards
sachin

Similar Messages

  • How to get the profit centres determined in automatic payment run - F110

    Hi,
    In F110 - Automatic payment run, is it possible to get the profit centres determined ?
    While doing manual payment, system gives the option to enter the related profit centres.
    But in F110 how can I get the profit centre (cost obect) selected ?
    Could anyone help ?

    Hi
    I assume you are referring to the PC for the Bank account?
    You can define the default PC in 3KEH.
    Rgds
    Nadini

  • Need search help for Profit centre

    Hi all,
    I am struggling to facilitate profit centres in SRM. I am quite close to it. I have done some config changes and could get the profit centre option in web browser under cost assignment. The POs are going through in R/3.
    BUT the searchhelp is not available in the web browser in the next field "Assigned to". There are different search helps available in the program LBBP_PDH_ACCF32 for different account assignment categories but not for profit centre.
    Let me know if there is some search help available somewhere in SRM for profit centre.
    Regards,
    Ravi

    Ravi,
    Hi. Profit centres, like cost centres, doen't exist on SRM as an entity. What the system does for cost centres is it holds a key to which system this exists on (eg the logical system name for R3). When you search for cost centres on the account assignement screen the system runs a search help on the R3 backend.
    My guess is that you would need to configure the system to act the same as with cost centres and run the search help for profit centres on teh R3 backend.
    Cheers
    Rob

  • Standard Batch Input Programs for Profit Center Creation

    Dear all;
    I am in 4.0B version that doesnt have BAPI_PROFITCENTER_CREATE. Writing a BDC for this would be complicated as my data is compiled in a different way.
    Are there any Standard Batch Input Programs for Profit Center Creation ?

    Hi Srivathsan,
    You can make use of  Standard BAPI by LSMW.
    Business Object   BUS1116      Profit Center Group
    Method                CREATE                      Create
    Message Type      PROFITCENTERGROUP_CREATE   
    Basic Type           PROFITCENTERGROUP_CREATE
    Regards,
    Sivaram.

  • Validate the posting date for profit centre documents actual/plan

    Hi,
    I have an requiremnt where we want system to validate the posting date for profit centre documents actual/plan, Functionality should be same as system check  posting period for FI documents maintained in OB52 and controlling cost centre documents posting period maintained in OKP1.
    For creating Profit centre document activity types are available in Tcode 0KEO.
    I have come across Exits EXIT_SAPLPC08_001 and  EXIT_SAPLPC08_002. But i am notsure whether we can use these and implement these.
    PLease suggest what can be done to achieve this.
    Regards,

    Hi,
    U can use subsititution and specify that the profit center could be your head office or the store as per your req...
    I think thats the only option we have..
    Cheers
    Raghu

  • Object ID for Profit Centre

    Hi,
    Does anybody know the object ID for Profit centre in 2007B PL-18
    Thanks
    Md.nazeer Shaikh

    Hi
    Profit center  object ID is 61
    Regards
    Arun

  • How to upload Hierarchy for Profit Centre

    Hi Experts,
    Can anyone help me with steps to load Hierarchy for Profit Centre and also on how to add new ones???
    Thanks,
    DV

    Hi Voodi,
    Thanks for your reply. I have few more doubts
    1. Can i load only subsets alone instead of whole Parent Hierarchy?
    2. For a new parent Hieararchy created in R3, how do i load it into BW? Can i just choose the new one in the infopackage and load it or shld i do something before that
    3. And after Hieararchy load shld i run Change run???
    Please reply.
    Thanks,
    DV
    null

  • PROFIT CENTRE DETERMINATION FOR VAT LINE ITEMS

    Hi Experts,
    My client having IS Retail ECC 6.0 Version and having several sites in all over Inida. Now problem Profit centre not updated in VAT Line items while billing. Every site having one profit centre. Site equal to Profit centre.
    Would you please expalin the process of profit centre determiantion for VAT line items.
    Rgds
    Mani Suma

    Dear,
    It is believed and felt it is the persisting problem if you are not using the using Document Splitting functionality in New GL...
    You can map one common profit center in 3KEH and at the month end you can allocated the to respective profit centers based on sales value..
    REgards,
    Chintan Joshi

  • Authorization Check for profit centres in SO level.....

    Dear Experts,
    Plant                 Profit Centre
    1                       400000010
    2                       400000020
    3                       400000030
    My client is having 1 sales org and 3 plants , 3 profit centres in different locations. While creating SO in Plant one user is able to create SO for Plant two , Materilas are common for all the plants and are extended. My requirement is when user is creating SO from Plant one , automatically , Plant1, profit centre 400000010must be greayed out mode . system must not allow the user to change the plant.
    Currently system is allowing me to take Customers from plant2 while i am creating a SO from plant 1.. system is also allowing me to change from Plant 1 to Plant 2.
    Kindly do the needful

    In the program MV45AFZZ use exit USEREXIT_FIELD_MODIFICATION to change the profit center to display mode so that no changes are possible and it always flows from material master irrespective of user ID.
    You can also use transaction variant SHD0 to make the profit center field as display.
    Regards,
    GSL.

  • Table for Profit centre wise G/L account data

    Hi all,
    is there any table or any function module  updating the  profit centre wise balance for G/L accounts. BSEG has profit centre but we are not prefering as it a cluster table.

    Hi,
    You can look at GLPCA or GLPCT (totals) tables.
    Regards,
    Eli

  • Profit centre determination

    Hi,
    I am having a problem posting treasury deals to balance sheet accounts. All configuration in treasury is fine but posting returns the error "Field profit centre required for account xxxx xxxxxx". I have assigned a profit centre to these accounts in transaction 3KEH but it is not being picked up when I try to post. Is there somewhere else where the profit centre needs to be assigned? Has anyone had this problem before?
    Thanks,
    Lucinda

    Hi all,
    Thanks for the responses. Yes I'm using ECC 6.0 and I have just now configured FAGL3KEH (which I didn't know about before this) and automatic posting to profit centres is now working!
    Thanks once again.

  • Reversing the liability for profit centre

    Hi Experts,
    During posting of MIRO for the freight by plant 1000 , system is reversing the liability of last line item in profit center 100000 itself instead of 1100000.
    Regards,
    Anish

    Hi,
    Check whether freignt gl is defualted to profit centre in faglkeh and check profit centre assignment in material master and if any cost centre or internal order is using in the po.

  • Using SKF to do allocation for Profit Centre

    Dear All,
    I am in the process of setting up the distributing the cost from 1 cost element to several profit centre base on SKF, which requires ratio of number of employee.
    The requirement of SKF is basically to capture the number of employee of one PC / total of employee of Profit centre group. Distribute the cost of cost element of ONE profit centre to a several profit centre (defined in PC group) base on SKF.
    I have created the SKF via KK01 and creating Profit centre group.
    Change the SKF via 9KE5.  Now, i am stuck of ensuring the ratio is created properly, which i think should be defined in 9KE5?
    I have tried to define the distribution rules via 4KE2 by choosing variable portion with actual value / SKF. However, the receiver of the profit centers which i defined the PC group was zero after i executed the cycle via 4KE5.
    Could you please shed some light what i have gone wrong or missed anything, as i have been trying to google and forum on the steps of setting up the distribution.
    Thank you so much and very much appreciated.

    Hello,
    Thanks for the reply. The concept should be the same for the distribution and assessment. I may adopt the cost allocation instead.
    However, may i know using SKF, are we able to compute the ratio :
    the number of employee of one PC / total of employee of Cost centre group?
    Could you shed some light on that? I understand we need to manually enter the number of employee, but using formulae for the SKF?
    Thanks

  • Cost of sales for profit centre accounting

    Hi all,
    we are running SAP R/3 vers. 4.7.
    We have set up cost of sales in finance (FI), which means that we can report by functional areas for a company code. Next step requested is to have a P&L statement structured by functional areas for profit centers.
    Is that possible? Can someone advise how to do?
    Appreciate any comments and suggestions.
    Kind Regards
    Reinhard Wiggers / Ahlstrom

    Dear Nizamkz
    As you would be aware, the condition type for Cost of Sales is VPRS. 
    Normally, in pricing procedure, we set this condition type as statistical with Subtotal as B and Requirement as 4.
    While creating sale order, you can see this in condition tab with the cost fetching from material master Accounting1 tab.
    This inventory cost is updated as and when you do PGI which you can see in MB51 where the delivery document reference will be displayed against each and every item you PGId and alongside will be the item cost.
    thanks
    G. Lakshmipathi

  • Exit for profit centre

    Hi Friends,
    My requirement is if i enter wrong profit centre value during sales order creation, system should displays the error that stops the sales order creation.
    How can i achieve this. Please let me know which exit to fulfill the above requirement.
    Thanks in advance.
    Regards,
    Govind.
    Message was edited by:
            Govind A

    Hi Govind,
    You can use Function Module: EXIT_SAPLV60B_008
    And write required code in Include ZXVVFU08
    Hope this will help u.
    Reward if it useful to u.
    REgards.
    Vishnu.

Maybe you are looking for

  • How do I get music off my iphone and into my itunes

    I had several CDs that I had downloaded into my itunes and put them on my iphone. Then my computer crashed and I had to get a new one. Now none of those cds are in my library but they're still on my iphone. How can I get them off my phone and into my

  • PLEASE HELP!!! AIRPORT EXTREME IS GREEN BUT NOT CONNECTING TO INTERNERT!!!

        Please, I'm begging of fellow man, women and children to help me figure this out! What Happened:      I had my Internet and everything working before I went to work at 3 PM. My girlfriend got home around 4 PM and all of a sudden the my Internet w

  • Can't  get Java 6 to work correctly

    I am probably in the wrong place here, and for that I apologize. We use a program at our school called Power School. In order to enter student marks, one accesses a page which is generated by Java. Since I purchased this new computer, I have been una

  • Problem Importing Sound With Video

    I'm trying to import a quicktime file into Flash 8 basic and I'm having a problem with the file's audio track. The video comes through fine but the audio won't import with it. I've tried bringing the file in as an embedded video and a movie clip, imp

  • Can BPS be used along with APO..?

    Hi, We are examining the possibility of using BW-BPS within APO environment as much of the forecast planning is carried out with APO data. Since BW3.5, SAP has bundled BPS into BW. Since APO has BW3.5, why not BPS could be used within APO. Any though