Program Load Error
HI everyone,
I have a problem regarding abap program,
I have transported a program with tcode from development server to production server but when i run the program in production server the program gives a runtime error.
" Program Load Error " thus dumping the program.
when i checked it in SE38 of production server it quotes " program does not exiist ".
Can please anyone let me know wat is the reason??
Thank you,
Vivek.
Hi vivekacharya,
I think you saved the report and tcode in different Transports Requests, you moved only one request in which the report is not exsist.
so go to se38 program goto utilities --> versions --> version management and then get the request and transport the request to production server.
Regards,
Sateesh
Similar Messages
-
Load error code 11 when attempting to open .vi from library
Hello,
Recently a colleague sent me a .llb containing a VI and sub-VIs of a program needed for my research. The VI opens correctly but none of the sub-VIs can be found by it and when I attempt to open the sub-VIs I get load error code 11: VI version (6.0) cannot be converted to the current Labview verstion (8.5.1) because is has no block diagram.
I am running Vista with 8.5.1 and attempting to open a library of version 6.0. I do not know what OS the library was compiled on. (Linux is a possibility) The colleague who sent me the program does not know either, as he recieved it from another colleague whom he is no longer in contact with.
I am fairly certain the library was saved with block diagrams, so I do not think that is the source of the error.
Does anyone know what might be a way to get these sub-VIs working?Okay,
File posted. Someone please tell me if this has a block diagram on it.
Attachments:
Find First Error.vi 24 KB -
How to resolve "Internal error: ABAP Report cannot be loaded" error
Hi All,
I am new to SAP.Please help me out from this problem.
When I am trying to debug BSP page, in debugging mode it shows "Internal error: ABAP Report cannot be loaded" error and then dumps.
In transaction ST22 it shows this dump something like this
Runtime Errors MESSAGE_TYPE_X
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
1 FUNCTION AC_SYSTEM_FLUSH .
2 *"----
3 ""Lokale Schnittstelle:
4 *" IMPORTING
5 *" VALUE(CALLED_BY_SYSTEM) TYPE C OPTIONAL
6 *" EXCEPTIONS
7 *" CNTL_SYSTEM_ERROR
8 *" CNTL_ERROR
9 *"----
10 data: sysubrc like sy-subrc.
11
12 CALL FUNCTION 'AC_FLUSH_CALL'
13 EXPORTING
14 SYSTEM_FLUSH = 'X'
15 CALLED_BY_SYSTEM = CALLED_BY_SYSTEM
16 IMPORTING
17 MESSAGE_NR = sysubrc
18 MESSAGE_TEXT = SY-MSGLI.
19
20 sy-subrc = sysubrc.
21
22 CASE SY-SUBRC.
23 WHEN 0.
24 WHEN 1.
25 * system_error
26 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
27 WHEN 2.
28 * method_call_error
>>>>> MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
30 WHEN 3.
31 * property_set_error
32 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
33 WHEN 4.
34 * property_get_error
35 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
36 WHEN OTHERS.
37 RAISE CNTL_ERROR.
38 ENDCASE.
39
40 ENDFUNCTION.
Thanks in advance
Sunil ChoudhuryHi Sunil,
The reason for this could be anything, anyways look up for an OSS note with the error message first.
As a workaround, you can try to use the classic debugger instead of the new ABAP debugger and see if it works.
You should be logged into SAP via SAP GUI when you are debugging BSP.
Regards
Chen -
Map loader / error loading catalog
Hi there,
i have a problem with the "map loader" and my Nokia 5800 XM.
... the map loader worked as i bought the phone some months ago. Everything worked fine. Today i had to do a reset. The map is still working, but i cant get the map loader to work.
After the start of the program and sync with the 5800 XM im getting an errormsg (in german but im trying to translate).. "cannot load the catalog of the 5800 xm"
Thats it. I googled whole day, but found no solution... so this forum is my last help right now.
It worked (today) before i have done the reset so im thinking that its not my OS (Windows7 64bit).
thx in advance
Murtone more thing.. i have updated the FW today to the newest available. 50.0.005
found also another thread here /t5/Maps-Navigation-and-GPS/Map-Loader-error-while-loading-catalogue/td-p/624895/page/2
might be an FW problem then? -
power book not loading (error: unable to find driver for this platform) help
That usually happens when trying to install Mac software intended for Intel-powered Macs (made in 2006 through present) on a PowerPC mac like teh powerbook (made before 2006).
You post is a little cryptic, however. We may be of further help if you can tell us:
<> the PowerBook's processor type (G3 or G4) and the Mac OS version, both available by doing "About the Mac" from your Apple menu.
<> what program and its version your were trying to run and/or install. -
My photoshop will not load, error message 148.3
my photoshop will not load, error message is 148.3
This is a licensing error. The usual fix is to reinstall the program after running the Creative Suite Cleaner Tool. also read this:
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
If you can't fix it, you will have to provide more info like system specs and what version of PS you actually use...
Mylenium -
Interface tables, Seeded program and error Table
Hi can any one let me know the interface tables, Seeded program and error tables for
1) On hand_quantity Interface
2) Sub inventory transfer conversion
Version: 11.5.10
DB: 10g
Thanks & Regards,
pallisHi Pallis,
Pl.refer following links for sub-inventory transfer.
Inventory API interface transaction loading
http://khalidmehmoodapps.blogspot.in/2010/08/inter-org-inventory-transfer.html
http://khalidmehmoodapps.blogspot.in/2010/08/inter-org-inventory-transfer.html
HTH
sanjay -
I'm on Win7, 64 bit. I originally uninstalled because a program changed my new tab page to something unwanted and I had literally no way of changing it back. Now every time I reinstall it I get the "profile cannot be loaded, it may be missing or inaccesible" error, and I cannot create a new profile. Every time I try any method of opening the profile editor, I get the "profile cannot be loaded" error then too. I can't access the folder under /appdata/roaming/mozilla at all. It says it is inaccesible and access is denied, and trying to delete it tells me that I don't have permission (even though I'm the admin). No other fix I have seen has worked. Can anyone help, please?
I ran a virus scan, cleaned up a single piece of adware, restarted, and it suddenly worked. I'm not sure what exactly caused it to begin working but it did so I consider this matter closed.
-
Nokia Map Loader Error in connection
Hi Guys,
I have an N80 and have the MAPS software installed on my phone and the Nokia Map Loader software on my Laptop. However, in order for me to download the maps I have to connect my N80 to my laptop in Data Transfer Mode and then run Nokia Map Loader. This should then allow me to download the Maps. I get an error when connecting to my laptop in Data Transfer Mode. It just says Invalid usb connection or something like that. No I don't think it is the maps software but I would like to know if any of you had the same problem before and how it can be resolved. I sent a note to Nokia Tech team to see if they know but it takes a while for them to get back to you.
So, does anybody know how I can get past this or get the MAPS downloaded?
Any advice would be greatly appreciated.
Cheerscan´t connect nokia map loader, error, won´t work?
I had this same problem, found your post looking for an answer (lol), and I just SOLVED the problem ; )
First, you don´t connect in data transfer mode. You must use pc suite mode, or it won´t work.
Second, (and this is the tricky part), YOU HAVE TO INSTALL nokia maps on your smartphone (so far ok, we all know this), but then you have to RUN THE PROGRAM ONCE.
Don´t ask me why, but if you just install nokia maps, then try to connect with nokia map loader, it won´t work. You have to install the program then run it once. Exit the program, then connect to you pc (nokia map loader) with pc suite mode.
BTW, do NOT install nokia maps on your smartphone on the phone memory. ALWAYS USE THE CARD MEMORY, install nokia maps on your memory card, because the maps are so huge. Most phones won´t have enough internal space.
So this is it, no more suffering. Damn, I´m good ; )
Message Edited by unsterblich on 17-Jan-2009 03:54 PM -
I successfully constructed and ran project in a workspace and
then saved it. Upon reopening it, I get an Information popup
describing a Load error on the only project in the workspace:
Load error.
Project: C:\Program Files\Oracle\JDeveloper 3.0
\myprojects\scc_soa.jpr
Exception: oracle.jbo.dt.objects.JboException
Load error.
Project: C:Progam Files\Oracle\JDeveloper 3.0
\myprojects\scc_soa.jpr
Object: lightInfo
Exception: java.lang.ClassCastException
The curious thing is that after dismissing the popup, the
applet/application runs. However, I cannot use the visual
designer on the class that defines my query nor deploy the app.
How can I trace down the problem?
nullLaura -
Thanks for the replies! The application I'm working on is an
Infobus project that was working against an 7.3.4 database. Last
monday night the database was upgraded to 8.0.4. Yesterday, the
problems persisted with the load errors, so I'm planning on
rebuilding the project/workspace and migrating the old
application on top of newly created business components.
- Scott
JDeveloper Team (guest) wrote:
: Hi Scott,
: The AppModule can be created in one of two ways. When you go
: through the Business Component wizard, on the page where you
: select your tables and views, there are two checkboxes below:
one
: for 'Create View Objects and Links' and a second for 'Create
App
: Module'. If you selected those in the BC Wizard, your app
module
: would be created by default based on all the entities you
: selected.
: The other way to do it is to select the package where all
your
: entities and views are located, and select Create AppModule
from
: the right-mouse menu (or go to the File\New gallery). If you
go
: this way, you hand-pick which views to include in the App
Module
: versus having them all put there by default.
: Tables without primary keys should not be a problem unless the
: database is a 7.3.x. In 8.x, we use the rowid column as a
: substitute for a primary key, but there were structural
changes
: to the rowid element between 7 and 8, so we can't do that for
7.
: What type of project are you trying to migrate from 2.0? Is
it a
: DBServlet or Infobus project?
: Laura
: Scott (guest) wrote:
: : Laura -
: : I did create the project with Business Components.
: : In Business Components Project Wizard: Step 3 of 3, I
selected
: : many tables and views from my schema. I do have an appModule
: but
: : do not recall how it was created (and I am unable to edit it
: : same exceptions as before).
: : I think the problem may be with a couple of the dozen or so
: : tables and views in the schema that are referenced by the
: : project (too much to type!). One of the tables does not have
a
: : primary key. This table is used in a view that is
constructed
: : with an outer join and an optimizer hint. I have started in
: : another workspace to re-build my application, verifying each
: new
: : component added to the project. Neither the table nor the
view
: : could be added through the
: : File/New/BusinessComponents/EntityObject method. I could
send
: : the project/workspace with the table/view descriptions if
the
: : entities mentioned above are supported by the Business
: Component
: : model.
: : What I would really like to do is migrate the application I
: : developed in JD2 to JD3 without having to re-construct it or
: : redesign the database.
: : JDeveloper Team (guest) wrote:
: : : Scott,
: : : Can you provide some details to help track down the
possible
: : : source of this problem?
: : : 1. I am assuming you have created a 'Project containing
: : Business
: : : Components' and then run through the Business Component
: Wizard
: : to
: : : create entity objects, and possibly also view objects and
an
: : : appModule. If this is not the case, could you let me know
: : what
: : : steps you performed when you 'constructed and ran project'.
: : : 2. Can you provide some information about the database
schema
: : you
: : : created your entity objects on (table descriptions, etc.).
: : : If there is way too much information to type, let me know
and
: : : we'll figure out a way for you to send us your project so
we
: : can
: : : see what is causing the problem.
: : : Thanks,
: : : Laura
: : : Scott (guest) wrote:
: : : : I successfully constructed and ran project in a
workspace
: : and
: : : : then saved it. Upon reopening it, I get an Information
: popup
: : : : describing a Load error on the only project in the
: workspace:
: : : : Load error.
: : : : Project: C:\Program Files\Oracle\JDeveloper 3.0
: : : : \myprojects\scc_soa.jpr
: : : : Exception: oracle.jbo.dt.objects.JboException
: : : : Load error.
: : : : Project: C:Progam Files\Oracle\JDeveloper 3.0
: : : : \myprojects\scc_soa.jpr
: : : : Object: lightInfo
: : : : Exception: java.lang.ClassCastException
: : : : The curious thing is that after dismissing the popup,
the
: : : : applet/application runs. However, I cannot use the
visual
: : : : designer on the class that defines my query nor deploy
the
: : app.
: : : : How can I trace down the problem?
null -
Hi All
This is regarding the loading error. We are running the process chains at every day mid night. We have around 8 PCs at that time. For one particular one process chain we are getting the following error messages.
Error COM routine using application program (return 83828)
Time bucket doesnu2019t exist
Errors in source system.
In the morning we are just running the repeat option then its getting successful. Why we are getting the failure message and hat is the problem?
Thanks in Advance
SravaniHi sravani
COM errors are a bit cryptic. From your description it sounds like this is a data issue and depending on the type of object the answer is probably in the CIF queue. The data is visible from the CIF queue which provides a way to find the problem. You must be manipulating data either on the outbound/inbound CIF or in the save of the data prioir going to the CIF. It sounds like a operation in a recipe or order has components that are directly assigned to the operation and when data going into APO the data is mapped for the live cache routine which is then not correct according to data integrity rules within live cache.
Can you provide more info such as what was passing thru the CIF - an order? Is the CIF queue still intact or was it deleted? Can you past the actual error message?
Many thanks
kiran -
Getting a "DDE Master Control.vi" error, along with Load Error Code 21
I am attempting to isntall and run the IAEA Nuclear Reactor Simulators on my work machine.
The simulators are a proprietary code packaged in a Labview wrapper, and distributed as Labview EXE files.
I have installed (copied the files off the provided DVD...there is NOT an installer) them in the same location on two machines, both running Win7, one home, one office. The only difference is the home machine is running Win7 64, and has a "Program Files (x86)" folder, where I installed it instead of "Program Files".
On the home machine, the simulator starts and runs BEAUTIFULLY on the first try.
When attempting to run the EXE on the work machine, the simulators throw:
"An error occured loading VI 'DDE Master Control.vi'
LabVIEW load error code 21: An external subroutine required for execution could not be found."
A handful of times, then:
"A subVI is not executable. The full development version of LabView is required to fix the errors."
The simulator then lands on the startup screen but will not initiate.
The home machine has NO labview components installed, not even the Runtime environment, and it works fine. As you can see, this is becoming quite confounding and frustrating.
I've attempted installing the RTE, VISA, and DAQ on the work machine to no avail.
Any assistance is greatly appreciated.Hi Benjaming,
Please take a look at this KB which explains how to solve LabVIEW load error code 21.
LabVIEW Load Error Code -21 When Running an Executable
http://digital.ni.com/public.nsf/allkb/78579B0FAA17F92286256993006A6473
Regards,
William
Applications Engineer
National Instruments -
Getting Page Load Error while opening a Opportunity in new window
Hi All,
outbound SSO is enabled.
when i try to punch-in to my application from CRM through opportunity web link with Web Link Target as "open in custom tab" its working properly, but when i have Web Link Target as "open in new window" i am getting page load error. previously with out Outbounf SSO it is working properly.
Do i need enable any settings in CRM
thankswhen the web link target is "open in new window" or "open in current window" the request send to third party application from CRM ONDemand is HTTPS request as SSL is not enabled it is giving "page load error"(In the web link we are specifying http only) (User athentication type is "username & password/ SSO")
Is there any setting in CRM Ondemand to send Http request only instead of HTTPS? -
Error building project using kXML2 - "Class loading error: Wrong name"
Hi,
I'm testing the XML-Parser KXML2 and downloaded the latest package, but the minimal version (kxml2-min.zip). I put this file into the directory "%j2mewtk%\apps\KxmlTest\lib" and wrote the lines
import org.kxml2.io.*;
import org.xmlpull.v1.*;
When I try to build the project with the Wireless Toolkit (v1.04) it spits out the following error:
Error preverifying class kxml2.io.KXmlParser
Class loading error: Wrong name
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
Build failed
I also tried the full package "kxml2.zip" but the same error occurs.
How can I get rid of this? Thanks in advance!Okay, finally worked it out (hopefully). I unpacked the archive to a directory (say "%J2MEWTK%\apps\KxmlTest\tmpclasses") and then preverified them "manually":
%J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.kxml2.io.KXmlParser
%J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParser
%J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParserException
Then I packed them again to a jar-file:
%J2SDK%\bin\jar.exe -cvf kxml2-min.jar %J2MEWTK%\apps\KxmlTest\tmpclasses\output\.
That was all! -
Hi all,
Please help me with this..
I got the following errors while load is running in essbase, I have seen this in log files..
All other cubes loaded successfully, except 1 cube.
ERROR 1054004 - Application is not loaded
ERROR - 1002097 - Unable to load database
The Oracle website shows
Possible solution for 1st error is Make sure that you created the filters correctly.
2nd error is not mentioned there.
Please help me solving this issue.
Cheers
PrashHi,
First of all can you start this database from say EAS, does it say it cannot start?
It might be a hung esssvr.exe process, stop all the databases and if you still see an esssvr.exe process running you may need to end that process unless you can stop it with maxl or esscmd.
If you are unsure how to do it then it might be easier to give the box a reboot.
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
Can we enter data in multiple currencies in BPC
Hi all, In BPC, is it possible to enter data in transaction currencies other than in local currency? For example, if the local currency of an entity is USD, but I need to enter data for the same Accounts in EUR, MYR and SGD as well and not have the
-
CAS array internal DNS IP address best practice
Hi, Just a question about a best practice approach for DNS and CAS arrays. I have an Exchange 2010 Org. I have two CAS/HUB servers and two MBX servers. My external DNS (mail.mycompany.biz) host record points to a public IP address which is NAT'd to t
-
install oracle Linux 5.0 update 3 i am not able to telnet are ftp .. i am able to use ssh via putty any idea
-
How would I share from elements 13 to Facebook/Twitter?
HHow can I share from elements 13 to Facebook?
-
HT201401 cant get my ringer or other sounds to work. Not on silent
Cant get my ringer or other sounds to work. I'm not on airplane mode, nor on silent. I have turned the phone off and tried a hard reset.