Program to maintain the selevtion variables
Hi All,
I maintain the variables in TVARV table where i need to maintain the condition low high for the variable which programme will maintain it.
regards
sai
Hi,
While maintaining the TVARV, using Tcode STVARV you will get two tabs.(Parameters,Selection Options).
If you want to specify any conditions like BT,LE,GE etc you can use the tab: selection options and give the values for Name, Option, Lower limit, Higher limit etc.
Regards,
Ashok
Similar Messages
-
Change in one vairable is not reflected in the other variable
Question/ Objective / Doubt:
during the execution of the program ,change in the member/variable of the class is not reflected in the other variable which is the dependent variable of the previous one;
Program / code:
class Simple {
static int [][] valOne;
static int [][] valTwo; //values depends on ?a? values
// static int [][] valTwo=Library.different(valOne); this doesn't work
// static { valTwo=Library.different(ValOne); } // this doesn't fulfill what i expect
Simple(int a[][]){
valOne=a;
ValTwo=Library.different(a); //say some static method
void change(int r,int c,int n){
//one of the ValOne is changed
valOne[r][c]=n;
class Library{
static int [][]different(int num[][]){
//some computations
return intArr;//returns a values with respect to the incoming variable
Description / Explanation:
during execution:
when change method is invoked to change valOne ; I want this change to be reflected in valTwo But this does not happen.....as valTwo in initialised only in the constructor
My Try / My Effort:
// static int [][] valTwo=Library.different(valOne); //this doesn't fulfill
// static { valTwo=Library.different(valOne); } // this doesn't fulfill
i declared variable as static so that this would solve the problem..
sorry if there any wrong in naming convention...
Jesh
Share knowledge; Grow together;
Edited by: java_jesh on Dec 14, 2007 2:02 PMit seems u are scolding me . my above comment is after seen this program
// Demonstrate static variables, methods, and blocks.
class UseStatic {
static int a = 3;
static int b;
static void meth(int x) {
System.out.println("x = " + x);
System.out.println("a = " + a);
System.out.println("b = " + b);
static {
System.out.println("Static block initialized.");
b = a * 4;
public static void main(String args[]) {
meth(42);
output:
Static block initialized
x=42
a=3
b=12
i like to know more. that's why i am continuing even after the objective is solved
Edited by: java_jesh on Dec 14, 2007 3:27 PM -
I was using the "configure Alarms" and "configure Logging" VIs to design two user interfaces to make use of these VIs when I came across a problem. In both VIs you can enable logging of alarms. So which one is valid? Which one has priority? Then I looked at the "Shared Variable Properties" built into the project explorer. Now I realize that I am spending all of this time redesigning this properties dialog (which also has two options of enabling logging of alarms (on the Alarms tab to the far right side as well as on the Logging tab). So now my question is, how do I access this "Shared Variable Properties" dialog through my program (Note: this would be on a different machine than where the shared variables are set up. The point is to configure shared variables remotely).
Thanks
MattHere is a VI I re-created and posted for all. I'm not sure why NI doesn't provide their VI to the developer. The only thing I can't figure out is that when reading in the "Ack Type" into a variable, it generates an error. It will work if you go into "project explorer" and right click on the library with the shared variable and "deploy" but eventually stops working. I have tried using the "undeploy library" and "deploy library" to see if this would be a work around but had no success.
Just pipe the path of the shared variable into the vi.
Mattk
Attachments:
Shared Variable Properties.vi 95 KB -
How toStore the Date Variable and pass it when the program runs next time??
HI All,
My JDBC program basically needs two command line args. Rabge_Start_Dt and Range_End_Dt. for ex:
2001-05-31 and 2001-06-01 . And my porgram should run every day. Next day the date range will be 2001-06-01 to some date. It means I have to store some how the range_end_dt and pass it as range_start_dt when my program runs the next day.
Problem:
How can I store the Data variable and pass it as an argument to my porgram when It runs next time. Every time my pogram runs It should pick the range start_dt (==range_end_dt of the previuos run) and end_dt I have to go and query some other data base and pass that value to it.
Thanks in advance!!!!save the value in a file, then read it back in each day. Similar to when a process needs a PID.
-blhqctz -
Where to maintain the user defined variables in Variant maintenace?
In the variant maintenace screen, ther is provision for
Type T - Table TVARVC entries
Type D - Dynamic for date and time fields
Type B - user defined
My question :
Where do you maintain the user defined variables?
Pl advise.
Thanks,
VenYou may need to look into this link ( Its sap doc link)
http://help.sap.com/saphelp_nw70/helpdata/en/c0/98039ee58611d194cc00a0c94260a5/content.htm
a® -
Maintain the variants for the deletion program
How to Maintain the variants for the deletion program during Document Archiving
Try this.
Execute SE38 and Select the program name ( Archiving )
Click Variant and Click Change Icon
and entry the new Variant and click Create icon and save with your own values
Ensure that System setting from the menu bar Settings - User Specific Settings PopUp Screen - Repository infosystem Tab - All Selection Criteria
Hope this Helps
Thanks
S.N -
Program/User exit to maintain the number ranges at plant level
Hi Everybody,
Could u please tell me program/user exit to maintain the number ranges at plant level.
Thanks & Regards,
PiyushHi
Do you want to maintain all the number range Objects
For Material Master you can use the enhancement MGA00002
For PO Nu,ber ranges you can use the enhancement MM06E003
Thanks & Regards
Kishore -
Maintain the variants for the deletion program first
Hello Experts,
When i am trying to archive documents through SARA Transaction, am getting the following error "Maintain the variants for the deletion program first".
Awaiting your early reply..
Rgds
RamanaYou get this message because there is a new program being used for this archive object. In addtion to adding a comment to the default variant, it would be wise to test the program in your QA system and review OSS for any updates.
-
Maintain the general program errors
hi all,
i have problem while printing the customized layout for PO with message.
Sytem message 038 from work area SSFCOMPOSER does not exist.
Message 038 from work area SSFCOMPOSER was not defined.
You have to maintain this message in the system. If you have
authorization for Customizing, maintain the general program errors.
Otherwise, please inform your system administrator.
Is it possible to maintain using SE91. if not, how to free from this message.
Thanks in advance for ur valuable time.
Regards,
reji.hi anji,
thanks for ur reply,
But it works fine in development client but not in test client both clients are in the same server, how this happens?
regards,
prabhu -
The system variables in java, NEEDED ONLY at CLI execution of java programs
The system variables in java, NEEDED ONLY at CLI execution of java programs, and NOT needed at all[essentially] if I install bundle(14+6.7)?
if I install bundle(14+6.7) to run-test a web app with netbeans 6.7 what I must press, then opens the default browser? I have to be online,...? How I test browse my project?Probably a complete tutorial on all possible environment variables in addition to a tutorial on netbeans configuration.
-
Standard Program Name for updating the System-Variables everyday in BACKGRO
Hi All,
Can anybody tell me the Standard Program Name for updating the System-Variables everyday in BACKGROUND job?Hello matt,
I have a program with variant.
This VARIANT input values will store in TVARVC table every day night background job.
i want the program name -
i recently purchased a small restaurant and am wondering if anyone can tell me the best programs to maintain vendor bills,payroll,menu sales tracking etc. it’s got to be easy to use! any suggestions?
Bento - the database manager from FilePro.
They have a large number of free templates to cover a number of different purposes.
Allan -
Trying to understand the PATH variable
Greetings,
I read that the PATH variable specifies a set of directories where executable programs are located. But if I use "echo $PATH" in Terminal to view the directories, it does not list the Applications folder or the Downloads folder or any of the other places I have programs. So how to they run?
ThanksThe PATH variable is a list of search paths used by a particular shell. Basically, when you enter a command in a command-line context (such as from within Terminal.app), the unix system will search for executables in all of the folders listed in the PATH variable, running the first it finds.
Apps that are run from the GUI are launched by the launch services daemon, which takes care of all the details of locating and loading executable. Launch services maintains a database of app locations, so it wouldn't need to search along unix PATHs to find what it needs. -
Coding for maintain the multip[le sessions
i have 1,00,000 records in a flat file how to maintain the multiple sessions
each session having 10000 records i want coding for how these multiple sessionssee the example program and the selection screen you can maintain how many records per session.
Report : ZMPPC015
Type : Data upload
Author : Seshu Maramreddy
Date : 05/26/2005
Transport : DV3K920025
Transaction: ??
Description: This ABAP/4 Program to Create Planned Independent
Requirement for SMI plants using MD61 Transaction.
It accepts tab-delimited spreadsheet input and
creates BDC sessions.
report zmppc015 no standard page heading
line-size 120
line-count 55
message-id zz.
Constants
constants : c_x type c value 'X'," Dynbegin
c_tcode type tstc-tcode value 'MD61'." Transaction Code
Variables
data : v_lines_in_xcel like sy-tabix,
l_tabix like sy-tabix,
v_trans_in_ssn type i,
v_ssnnr(4) type n," Counter
v_ssnname like apqi-groupid,
v_matnr(18) type c. " Material Number
Internal Tables
Internal table for file
data : begin of t_file occurs 0,
matnr(18) type c, " Material Number
berid(10) type c, " MRP Area
PLNMG01(17) type n, " Forecast Month -01
PLNMG02(17) type n, " Forecast Month -02
PLNMG03(17) type n, " Forecast Month -03
PLNMG04(17) type n, " Forecast Month -04
PLNMG05(17) type n, " Forecast Month -05
PLNMG06(17) type n, " Forecast Month -06
PLNMG07(17) type n, " Forecast Month -07
PLNMG08(17) type n, " Forecast Month -08
PLNMG09(17) type n, " Forecast Month -09
PLNMG10(17) type n, " Forecast Month -10
PLNMG11(17) type n, " Forecast Month -11
PLNMG12(17) type n, " Forecast Month -12
WERKS(4) TYPE C, " Plant
end of t_file.
Internal table for BDCDATA Structure
data : begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data : end of itab_bdc_tab.
Selection-screen
selection-screen: skip 3.
selection-screen: begin of block id1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPIRCT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default c_x,
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen : skip 1.
Requirement type
parameters : p_bedae like t459u-bedae,
From Date
p_date like sy-datum default sy-datum obligatory.
selection-screen: end of block id1.
at selection-screen on value-request for p_name.
F4 value for Input file
perform filename_get.
main processing
start-of-selection.
To get the data from file to Internal table
perform getdata_fromfile.
loop at t_file.
hang on to xcel line num
l_tabix = sy-tabix.
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
clear t_file.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
*& Form filename_get
F4 Value for input file
FORM filename_get.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_PATH = 'C:\Temp\ '
MASK = ',.,..'
MODE = 'O'
TITLE = 'Select File '(007)
IMPORTING
FILENAME = p_name
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " filename_get
*& Form getdata_fromfile
Upload the data from file to Internal table
FORM getdata_fromfile.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = p_name
FILETYPE = 'DAT'
TABLES
DATA_TAB = t_file
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
if sy-subrc eq 0.
sort t_file by matnr .
delete t_file where matnr = ''.
clear v_lines_in_xcel.
describe table t_file lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
write:/ 'Error reading input file'.
stop.
endif.
ENDFORM. " getdata_fromfile
*& Form bdc_session_open
BDC_OPEN_GROUP
FORM bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = v_ssnname
KEEP = p_keep
USER = p_uname
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " bdc_session_open
*& Form bdc_build_script
BDC Script
FORM bdc_build_script.
Local Variables
DATA : l_frdat(8) type c, " From Date
l_todat(8) type c, " To Date
l_frdat1(4) type c, " Year
l_frdat2(2) type c, " Month
l_frdat3(2) type c, " Day
l_tdate like sy-datum, " Subtract date(1)
l_todat1(4) type c, " Year
l_todat2(2) type c, " Month
l_todat3(3) type c. " Day
Get the material number from tables ZMSMI_FERR_RAW,
ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
perform get_matnr.
Screen 0100.
perform bdc_screen using 'SAPMM60X' '0100'.
perform bdc_field using 'BDC_OKCODE' '/EBDPT'.
perform bdc_field using 'AM60X-MATAW' 'X'.
perform bdc_field using 'AM60X-MATNR' T_FILE-MATNR.
perform bdc_field using 'AM60X-PRGRP' SPACE.
perform bdc_field using 'AM60X-PBDNR' SPACE.
perform bdc_field using 'RM60X-BERID' T_FILE-BERID.
perform bdc_field using 'AM60X-WERKS' SPACE.
perform bdc_field using 'RM60X-VERSB' '00'.
Converted the date as per MD61 Transaction.
From date
l_frdat1 = p_date+0(4).
l_frdat2 = p_date+4(2).
l_frdat3 = p_date+6(2).
concatenate l_frdat2 l_frdat3 l_frdat1 into l_frdat.
To Date
l_tdate = p_date - 1.
l_todat1 = l_tdate+0(4) + 1.
l_todat2 = l_tdate+4(2).
l_todat3 = l_tdate+6(2).
concatenate l_todat2 l_todat3 l_todat1 into l_todat.
perform bdc_field using 'RM60X-DATVE' l_frdat.
perform bdc_field using 'RM60X-DATBE' l_todat.
perform bdc_field using 'RM60X-ENTLU' 'M'.
Screen 0127
perform bdc_screen using 'SAPMM60X' '0127'.
perform bdc_field using 'BDC_OKCODE' '=WEIT'.
if p_bedae is initial.
perform bdc_field using 'T459U-BEDAE' space.
else.
perform bdc_field using 'T459U-BEDAE' P_BEDAE.
endif.
Screen 0100.
perform bdc_screen using 'SAPMM60X' '0100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'AM60X-MATAW' 'X'.
perform bdc_field using 'AM60X-MATNR' T_FILE-MATNR.
perform bdc_field using 'AM60X-PRGRP' SPACE.
perform bdc_field using 'AM60X-PBDNR' SPACE.
perform bdc_field using 'RM60X-BERID' T_FILE-BERID.
perform bdc_field using 'AM60X-WERKS' SPACE.
perform bdc_field using 'RM60X-VERSB' '00'.
perform bdc_field using 'RM60X-DATVE' l_frdat.
perform bdc_field using 'RM60X-DATBE' l_todat.
perform bdc_field using 'RM60X-ENTLU' 'M'.
Screen 0200
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG01.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG02.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG03.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG04.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG05.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG06.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG07.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG08.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG09.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG10.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG11.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=SICH'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG12.
ENDFORM. " bdc_build_script
*& Form get_matnr
Get the material number from tables ZMSMI_FERR_RAW,
ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
FORM get_matnr.
clear v_matnr.
case t_file-werks.
when '0101'.
select single cmatnr from zmsmi_simp_raw
into v_matnr where matnr = t_file-matnr.
if sy-subrc eq 0.
clear t_file-matnr.
t_file-matnr = v_matnr.
endif.
when '0103'.
select single cmatnr from zmsmi_ferr_raw
into v_matnr where matnr = t_file-matnr.
if sy-subrc eq 0.
clear t_file-matnr.
t_file-matnr = v_matnr.
endif.
when '0102' or '0110' or '0111' or '0112' or '0113'
or '0114' or '0115' or '0116' or '0117'.
select single cmatnr from zmsmi_snap_raw
into v_matnr where matnr = t_file-matnr.
if sy-subrc eq 0.
clear t_file-matnr.
t_file-matnr = v_matnr.
endif.
endcase.
ENDFORM. " get_matnr
*& Form bdc_screen
BDC Script for Screen fields
-->P_PROG Program name
-->P_SCRN Screen Number
FORM bdc_screen USING p_prog
p_scrn.
clear itab_bdc_tab.
itab_bdc_tab-program = p_prog.
itab_bdc_tab-dynpro = p_scrn.
itab_bdc_tab-dynbegin = c_x.
append itab_bdc_tab.
ENDFORM. " bdc_screen
*& Form bdc_field
BDC Script for Screen fileds
-->P_NAM Field name
-->P_VAL Field value
FORM bdc_field USING p_nam
p_val.
clear itab_bdc_tab.
itab_bdc_tab-fnam = p_nam.
itab_bdc_tab-fval = p_val.
append itab_bdc_tab.
ENDFORM. " bdc_screen
*& Form bdc_submit_transaction
BDC_INSERT Function Module
FORM bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
EXPORTING
tcode = c_tcode
TABLES
dynprotab = itab_bdc_tab
EXCEPTIONS
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh itab_bdc_tab.
ENDFORM. " bdc_submit_transaction
*& Form bdc_session_close
text
FORM bdc_session_close.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
ENDFORM. " bdc_session_close
Reward Points if it is helpful
Thanks
Seshu -
BKI0008E: The environment variable BI_CALLER is not set correctely. The cur
Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
Found keyword 'TIMEOUT_FAILURE' with value '1800'.
Finished reading of the Backint for MaxDB configuration file.
Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
Using '1800' seconds as timeout for Backint for MaxDB in the case of success
Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
Setting environment variable 'BI_REQUEST' to value 'NEW'.
Setting environment variable 'BI_BACKUP' to value 'FULL'.
Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
Asking for state of database.
2009-10-22 02:06:09 Database is still preparing the backup.
Waiting 1 second ... Done.
Asking for state of database.
2009-10-22 02:06:10 Database is still preparing the backup.
Waiting 2 seconds ... Done.
Asking for state of database.
2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
2009-10-22 02:06:12 The backup tool is running.
2009-10-22 02:06:12 The database is working on the request.
2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
2009-10-22 02:06:17 The database is working on the request.
2009-10-22 02:06:27 The database is working on the request.
2009-10-22 02:06:42 The database is working on the request.
2009-10-22 02:07:02 The database is working on the request.
2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
2009-10-22 02:07:17 The database has finished work on the request.
Receiving a reply from the database kernel.
Got the following reply from db-kernel:
SQL-Code :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
Have encountered error -24920:
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Constructed the following reply:
ERR
-24920,ERR_BACKUPOP: backup operation was unsuccessful
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
Removing data transfer pipes.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
Removed data transfer pipes successfully.
Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
Data Protection for mySAP(R)
Interface between BR*Tools and Tivoli Storage Manager
- Version 5, Release 4, Modification 0.0 for Linux x86_64
Build: 303 compiled on Nov 16 2006
(c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
usage:
backint -p <par_file> [-u <user_id>] [-f <function>]
[-t <type>] [-i <in_file>] [-o <out_file>] [-c]
where:
<user_id> backint utility user
<function> backup | restore | inquire | password | delete
<type> file | file_online
<par_file> parameter file for backup utility
<in_file> name of a text file that defines the objects
default: STDIN
<out_file> Pool for processing messages and the results
of the executed function.
default: STOUT
BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
BKI0021I: Elapsed time: 01 sec .
BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.Also, is there any specification about the user permissions and about how the backup should be run?
Maybe you are looking for
-
Value to be entered for Version type while populating metadata into Plannin
Hi I have extracted the version dimension from my outline. Now i need to push it into Planning 11. I have reversed the planning dimension 7 using the version dimension to push value. After extract, the version type comes under UDA as "Standard bottom
-
I had to update some drivers. After doing that, every time I try to get online with Firefox 5, the computer automatically reboots. I had to uninstall it.
-
Dear All, There are some details which my client has asked to maintain in the sales order and this needs to be copied in the purchase order ouput, if I maintain a text type in my sales order and this same text type is maintained in the purchase order
-
I am trying to use copy replace but getting "%The input file is not a valid config file." errror message on ASR1001 platform. following is the config i am trying to replace (saved as test-config) hostname ABC-01 boot-start-marker boot-end-marker vrf
-
When do we use CE plan operators in HANA? any specific scenario?
when do we use CE plan operators in HANA? any specific scenario?