Programatically get list of closed periods. How?

Hi,
I need FI period list that closed (not open).
How can I get that list programatically?
Thanks.

Hi,
I really do not know the advantage of knowing the closed period. This is something like to know the items scrubbed on a slate.
You may please go to transaction code SE16
Please give table Name T001B
Enter
Select your selection parameters
Execute
Alternatively, you can see the list at transaction code OB52
This list only gives the list of normal periods / special periods that are being opened in a particular fiscal year against a POSTING PERIOD VARIANT. This will not give which are the periods that are being erased / closed previously.
If you want to know programatically, then a customized report has to be written, stating pick the periods from this table, which are closed. Meaning that give the other periods, other than the current periods in this table.
Regards,
Ravi

Similar Messages

  • I want post closed period.. how to do that

    Hi
    I want to post a document in closed period, how to reopen in production server, and after post wht are the further steps.
    Thank you

    Hi
    Once the period is closed, it is not advisable to open the period again.
    First check the procedure following in your company, if the procedure allows, open the period in tcode-OB52 and do accordingly, if not no chance post in current period.
    VVR

  • Control the opening and closing period

    hi ,
    Control the opening and closing period
    How I can control open and close peroid at the level of (ledger or legal entity or operating unit)
    thanks

    can you clarify it, what does it mean 'control' the opening period

  • How to get list of company codes with current period not opened?

    Hi,
    How to get list of company codes with current period not opened?
    Is there any way we can check whether the current period is opened for all company codes.
    If not how, can we generate a report which having information of period and company code. Also please tell me, which table will have info on posting periods and company codes.
    Thanks
    Vineeth Varghese

    Hi,
    The MM periods details can be viewed In Table MARV . On the selection screen you have the option of entering the company codes , current period, year current period etc. so make the required entries and you get the all details relevant to MM periods. Also it can be downloaded as a report.Thanks

  • How to get list of deployed application on server programatically?

    Hi,
    I am trying to build an application which will display list application(WebDynpro , Portal) deployed on portal server. In EP 7.0 we can go to Content Admin -> WebDynpro  page to get list of WebDynpro  application. Par files can be found under portal runtime->browse deployment page.
    In CE we have nice feature which shows both portal application and WebDynpro  application in content Admin->portal content list.
    I want to find list of applications programmatically, is there any way to achieve this? Are there any apis where I should take a look at.
    Thanks,
    Nitesh Shelar

    Hi,
    Thank you for your reply.
    I tried using
    String[] applications = WDServerState.getActualApplications();
    I am getting following exception.
    java.lang.UnsupportedOperationException: Not longer supported starting with NW07.
        at com.sap.tc.webdynpro.serverimpl.core.admin.AbstractServerState.getActualApplications(AbstractServerState.java:133)
        at com.sap.tc.webdynpro.services.sal.admin.api.WDServerState.getActualApplications(WDServerState.java:52)
    Do you know Any other api which I can use?
    Regards,
    Nitesh Shelar

  • Need to create report query to get latest open and last closed period for given application

    Hi All,
    I need to create a report query to get below result displayed in report output.
    1)   -   Application name
    2)   -    Ledger name
    -o/  -Operating Unit
    3)   -  Last Closed Period
    4)   -  Current Open Period
    5)   -  Date Closed – Last Closed Period
    6)   -  Date Open – Current Open Period
    I tr I tried to create the query below is the same. Please let me know if it looks fine.
    SELECT *
      FROM (SELECT fav.application_name ,
                   hou.name Operating_Unit_Name,
                   gl.name Ledger_name,
                   gl.latest_opened_period_name,
                   gps.period_name Period_Name,
                   DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
                   gps.last_update_date Last_status_modified_date
              FROM gl_period_statuses gps,
                   gl_sets_of_books   gsob,
                   fnd_application_vl fav,
                   hr_operating_units hou,
                   gl_ledgers         gl
             WHERE gps.period_name = gps.period_name
               AND gps.closing_status ='C'
               AND fav.application_short_name =
                   NVL('&p_application_short_name', fav.application_short_name)
               AND gps.application_id = fav.application_id
               AND gsob.set_of_books_id = gps.set_of_books_id
               AND hou.set_of_books_id = gps.set_of_books_id
               AND gl.ledger_id = gsob.set_of_books_id
               AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
               AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id) 
             ORDER BY gps.last_update_date desc )WHERE ROWNUM = 1 
    UNION ALL
    SELECT *
      FROM (SELECT fav.application_name Application_Name,
                   hou.name Operating_Unit_Name,
                   gl.name Ledger_name,
                   gl.latest_opened_period_name,
                   gps.period_name Period_Name,
                   DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
                   gps.last_update_date Last_status_modified_date
              FROM gl_period_statuses gps,
                   gl_sets_of_books   gsob,
                   fnd_application_vl fav,
                   hr_operating_units hou,
                   gl_ledgers         gl
             WHERE gps.period_name = gps.period_name
               AND gps.closing_status = 'O'
               AND fav.application_short_name =
                   NVL('&p_application_short_name', fav.application_short_name)
               AND gps.application_id = fav.application_id
               AND gsob.set_of_books_id = gps.set_of_books_id
               AND hou.set_of_books_id = gps.set_of_books_id
               AND gl.ledger_id = gsob.set_of_books_id
               AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
               AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id) 
             ORDER BY gps.last_update_date desc)
             WHERE ROWNUM = 1

    It is within the table I believe (I'm not a DBA or a developer) since I created a BLOB column and then used the file browse feature to allow users to attach a resume to the table in order to be able to perform a search of the attached documents.
    I'm just having a hard time pointing the link in the search results report to the document in the blob column.
    The information on that page is great if you're trying to create a link to the document on the initial report.
    But I created a query using Oracle Text to run a report that does a boolean search of the attached word documents in the table.
    When it displays the search results, it doesn't create a link to the document and I can't figure out how to do it.
    Here's a link the the instructions I used to create the initial search report with Oracle Text, mind you I only created the index and query, I didn't add in all the link data since they're using documents on websites and I'm using documents in a table.
    http://www.oracle.com/technology/products/database/application_express/pdf/apex_text_application_v1.6.pdf
    If you can help me with this I'd really appreciate it.
    Thanks again.
    Greg
    Edited by: gjones77 on Dec 2, 2008 8:14 AM

  • How to open already closed period in MM

    Hello GURU
    I have heard its porrible to open alrady closed period in MM in MMPI
    But I would like to know your opinion and how exactyl this can be done?we are in 04 period now and user wnats to open period 01
    thanks in advance
    hana

    Hello Hana,
    It is possible to reopen a previously closed period. However, it isn't
    advisable to do because the valuation data of the previous period could
    get affected. If you decide to proceed with the process, please review
    the documentation of program RMMMINIT (To see this documentation, please
    do the following: SE38, RMMMINIT, and select the documentation button
    and display).
    Take into account the documentation of the program RMMMINIT:
    "Caution
    Be careful if the period used for initialization precedes the current
    period in the control record for the company code since this can result
    in an inconsistency between goods movements and material master segments
    This is because the stock information in the material master segments is
    assigned to the new current period in this case."
    Please also review the note 70545 regarding the initialization
    process. Although this note is NOT valid for your release, it provides
    good information on the use of initialization for correction purposes.
    Additionally, please review the note 369637 in this regard as well.
    PLEASE FIRST PERFORM THIS IN A TEST/DEVELOPMENT SYSTEM PRIOR TO MOVING
    TO PRODUCTION AS YOUR VALUATION DATA FROM PREVIOUS PERIOD WILL BE
    AFFECTED. If you are satisfied with the results, then you can move it
    to production.
    Also see the SAP On-line documentation (http://help.sap.com):
    Logistics - General (LO)
    -> Logistics Basic Data (LO-MD)
    -> Material Master (LO-MD-MM)
    -> Period closing
    In addition, as you know, please check the following note as well:
    487381 - RMMMINIT: Protection against unintentionial execution
    I hope this information helps you.
    Regards,
    Fábio Almeida
    MM Consultant

  • How to reverse the closing period document.

    Hi
    The entry can be reverse Only in current period
    You are trying the reverse the entrie in close period which is not possible .. how to reverse the closing period document.
    Thank you

    Use t code FB02. Enter required parameters and press enter. From the menu slect Extras - Document header. This will take you to next screen. In this screen from the menu select GoTo Document Header. Change the reversal date and save.
    Then reverse the document using normal process. The document will get reversed on the new date entered.
    Hope this helps. If useful, please reward points.
    Regards
    Rakesh Pawaskar

  • How to get a report "closed" when using the ReportViewerBean

    I read the article /people/ted.ueda/blog/2008/12/20/crystal-reports-for-eclipse--ensuring-report-cleanup from Ted Ueda regarding cleaning up reports for the RAS server.  However, I'm trying to figure out how to get this accomplished for a thick client accessing a local rpt file and then displaying that file using the ReportViewerBean.  I can't seem to get the report closed. I tried the dispose() techniqe from the article, but with no success.
    My basic process is:
    1) Press button on main frame to open and set up report
    2) Pass open report (via ReportClientDocument) object to the viewer frame class (which views report in separate window using ReportViewerBean)
    3) Close viewer window when done, destroy ReportVieweBean and close ReportClientDocument
    4) Press button again on main frame later to view report
    If I set up the report but skip the step of sending the report to the viewer frame, ReportClientDocument.isOpen() will go from true to false after I execute just  the ReportDocumentClient.close() command.  However, if open the viewer frame, I cannot get the report closed.
    In the window closing event for my viewer window I have:
    public void quit() {
                try {
                    CrystalReportViewer crv1 = new CrystalReportViewer();
                    crv1.setReportSource(reportClientDoc.getReportSource());
                    reportViewer.destroy();  //this is a ReportViewerBean
                    reportClientDoc.close();  //this is a ReportClientDoc
                    crv1.dispose();
                    //the following is always true
                    System.out.println("ReportClientDoc.isOpen: " + reportClientDoc.isOpen());
                    this.dispose();
                catch(ReportSDKException ex) {
                    ex.printStackTrace();
                catch(ReportSDKExceptionBase ex) {
                    ex.printStackTrace();
    I'm using the latest Java CR4E 12.2.205.825 downloaded from the CR4E website.  Any ideas?
    Edited by: Joseph Huber on Mar 16, 2010 8:13 PM

    The webservices you are trying to use are not the ones used for enterprise, they are used for non-enterprise applications accessing reports that are stored in a specific location on the web server.
    Here are samples that use our Enterprise SDK:
    [https://boc.sdn.sap.com/samples/84/1193|https://boc.sdn.sap.com/samples/84/1193]
    Here are samples that use our Enterprise Web Service SDK:
    [https://boc.sdn.sap.com/samples/84/1197|https://boc.sdn.sap.com/samples/84/1197]
    You can also look at the SDK documentation available here:
    [http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm]

  • How to get list of software installed in a system

    How to get list of softwares installed in a system?. should i use registry to get information or control panel?
    is there any package available for this? how should i start with/
    thanks

    How to get list of softwares installed in a system?.Using native code, if at all.
    should i use registry to get information or control panel?Linux has neither.
    is there any package available for this? how should i start with/ Learn the Windows API or Google for some native tool.

  • When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all.

    When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all. Any help is greatly appreciated.

    Hey Grupo Castillo,
    Thanks for the question. You can actually configure this behavior from Mail preferences:
    1. Choose Preferences from the Mail menu.
    2. Click Composing.
    3. Deselect the checkbox for "When sending to a group, show all member addresses".
    When you send an email to the group, only the groups name will be seen.
    Mac OS X: Mail - How to Hide Address Book Group Member Names When Sending an Email
    http://support.apple.com/kb/TA21082
    Thanks,
    Matt M.

  • I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

    I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

    Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
    So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
    Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
    Memory can be tested with memory diagnostics programs like Memtest+
    Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
    If the motherboard has no response then do the basics first:
    Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

  • I used to have a web page in mobile me and now is closed.  How can I get my webpage data back?

    I used to have a web page in mobile me and now is closed.  How can I get my webpage data back?

    Your web pages on MobileMe have been deleted. If you were using iWeb you wouldn't have been able to open them anyway.
    As long as you have the iWeb 'Domain' file in your user Library, or whatever the program you are using stores the information in, on your Mac you can publish to another hosting service - there are plenty to choose from. More information here:
    http://rfwilmut.net/missing2

  • How to programatically get a Java version (Not default one) ?

    Hi, Java Guru,
    Does anyone know how to programatically get a Java verstion through its full path ?
    For example, there are 5 JVM installed on a user's machine:
    JRE1
    JRE2
    JRE3
    JRE4
    JRE5
    How do you know the Java version under JRE3 ?
    From command line, you can simply type
    JRE3/java -version
    But how to programtically ? (I thought about running a system call, then check the standout, but feel it is not reliable, is there any other way to do it ?)
    Thanks in advance.

    No. That is not waht I want. Using System.getProperties() only can get the default Java information.
    Assume there are many Java version installed on a user's machine and we know all java Path.
    JRE1/bin/java
    JRE2/bin/java
    JRE3/bin/java
    JRE4/bin/java
    JRE5/bin/java
    JREn/bin/java
    JREn/bin/java is the latest one installed, that is, default Java.
    I want to know the JRE3 version before I use it, then how do I know JRE3 version PROGRAMTICALLY ?
    Anyway, thanks for response.

  • How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
    With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

Maybe you are looking for