Prohibitory sign appear after failed install security update 2010-005

Anyone can help?
I checked the apple document and tried reset PRAM. no luck.....
Next suggestion is....erase and install...............should i do that??
I did not do any backup before.......

Tried hold the "x" button to force the OSX to start....
It works, but slow response (since i m using 1GB ram on my iMac...)
However, tried installed a 3rd party 2GB RAM and restart............
iMac boot up and freeze after wallpaper loaded................
Will try another reboot later...

Similar Messages

  • HT1338 Hi, I'm trying to load Facetime on my MacBook and it says "You are missing a critical security patch. Please use Software Update to install Security Update 2010-005". I've checked and all my software is updated. What do I do?

    Hi, I'm trying to load Facetime on my MacBook and it says "You are missing a critical security patch. Please use Software Update to install Security Update 2010-005". I've checked and all my software is updated. What do I do?

    First off, iOS 5 will not run on Macs.   You need to give us your Mac OS X on your Mac to determine which security update you need.  Go to Apple menu -> About This Mac.     And then read the link here:
    http://support.apple.com/kb/HT1222

  • Secure Empty Trash Problem After Installing Security Update 2010-005

    Some items in trash were locked, selected option to remove all items and nothing was deleted. Rebooted twice, no change. Unsecure empty trash works fine. Any ideas?

    Hello, i have the same problem. After security update the Mailprogram is polling my imap accounts (which requires SSL) endless. My workarround was to install Thunderbird. TB did the job. Any solution?
    thh001

  • Applications crashing after installing security update 2010-003

    Hi all, anyone else having this problem (and found a solution)? After installing security update 2010-003 on snow 10.6.3, entourage, firefox, and even itunes are crashing at launch. Safari seems stable, but haven't tried other apps yet. Verified permissions on my boot disk and repaired it but the problem persists. It started after rebooting after installing the security update. I'll reinstall the OS if needed but hoping this is a bug someone has solved. Thanks!

    http://www.thexlab.com/faqs/multipleappsquit.html

  • Finder restart every two seconds! After install security update 2011-005

    After install security update 2011-005, I rebot my computer and every seemed normal, until I saw that started to restart the finder.
    Help me! please.
    PD: I try to delete the famous "com.apple.finder.plist" but I can't found them.
    Is a MacBook Pro 13''  mid 2009  OS X Lion (10.7.1)

    You may be able to repair this with 10.4.8 PPC Combo Update
    This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    -mj
    [email protected]

  • Outlook from Office 2011 can't start after OS X Security Update 2014-005

    I just installed Security Update 2014-005 on OS X v10.9.5 in a MacBook Pro (2012). After the OS restarts, Microsoft Outlook from Office 2011 fails to start. Did anyone else experience this issue and have a solution that can be shared?

    Try u-installing Office and re-installing.
    Office 2011 Removal
    Office 2011 Removal (2)

  • VPN broken after 10.6.4 Update / Security Update 2010-005

    I have a MacMini Server that was running 10.6.3 in use as a gateway for the last 3 or 4 months and everything has been working just fine. However, after applying 10.6.4 and Security Update 2010-005 the iChat and VPN services broke.
    I was able to fix the iChat service by using serveradmin in Terminal - Server Admin was showing the correct name of the iChat server, but serveradmin reported a different (incorrect) name. My only guess is that one of the updates somehow changed that setting behind the scenes.
    I have yet to be able to fix the VPN (L2TP) issue, though. I can connect internally (to 10.0.1.1) with no problem. I can connect with via iPhone over 3G no problem. I cannot connect externally from a 10.5.8 or a 10.6.4 client - any attempt always fails with a timeout. The VPN log shows nothing, but the system log shows:
    Sep 24 14:18:33 gateway racoon[90950]: Connecting.
    Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: receive success. (Responder, Main-Mode message 1).
    Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
    Sep 24 14:18:36 gateway racoon[90950]: IKE Packet: transmit success. (Phase1 Retransmit).
    Sep 24 14:19:03: --- last message repeated 8 times ---
    Sep 24 14:19:03 gateway racoon[90950]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
    Sep 24 14:19:03 gateway racoon[90950]: Disconnecting. (Connection tried to negotiate for, 29.171451 seconds).
    Sep 24 14:19:03 gateway racoon[90950]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
    It would seem that the response to the initial handshake is being blocked. However, serveradmin has this to say about ipfilter:
    gateway:/ *******$ sudo serveradmin settings ipfilter|grep VPN
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN ISAKMP/IKE:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP - Layer-Two Tunneling Protocol:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: IKE NAT Traversal:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ISAKMP/IKE:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:action = "allow"
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:readOnly = yes
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:protocol = "gre"
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:name = ""
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:dest-port = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:readOnly = yes
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:protocol = "esp"
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:dest-port = ""
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:oldDescription = "Layer-Two Tunneling Protocol (L2TP)"
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:dest-port = "1701"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:oldDescription = "PPTP VPN"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:protocol = "tcp"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:readOnly = no
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:name = ""
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:dest-port = "1723"
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:dest-port = "500"
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:dest-port = "4500"
    Which seems to be correct to me.
    As with the iChat problem, everything seems to be correct as reported by Server Admin. I have been hunting for the incorrect setting using serveradmin, but so far everything there seems to be correct as well.
    One last item that I just discovered today, and which is probably a huge hint (and I just don't know how to connect the dots), is that when I stop the VPN service (it's running on the gateway server), the entire office loses it's connection to the internet. Turn VPN back on, and the internet is back.
    I think my server is deeply, deeply disturbed, but I am not ready to wipe it clean and start over again. I sure would appreciate any insights on this one....

    I have a MacMini Server that was running 10.6.3 in use as a gateway for the last 3 or 4 months and everything has been working just fine. However, after applying 10.6.4 and Security Update 2010-005 the iChat and VPN services broke.
    I was able to fix the iChat service by using serveradmin in Terminal - Server Admin was showing the correct name of the iChat server, but serveradmin reported a different (incorrect) name. My only guess is that one of the updates somehow changed that setting behind the scenes.
    I have yet to be able to fix the VPN (L2TP) issue, though. I can connect internally (to 10.0.1.1) with no problem. I can connect with via iPhone over 3G no problem. I cannot connect externally from a 10.5.8 or a 10.6.4 client - any attempt always fails with a timeout. The VPN log shows nothing, but the system log shows:
    Sep 24 14:18:33 gateway racoon[90950]: Connecting.
    Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: receive success. (Responder, Main-Mode message 1).
    Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
    Sep 24 14:18:36 gateway racoon[90950]: IKE Packet: transmit success. (Phase1 Retransmit).
    Sep 24 14:19:03: --- last message repeated 8 times ---
    Sep 24 14:19:03 gateway racoon[90950]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
    Sep 24 14:19:03 gateway racoon[90950]: Disconnecting. (Connection tried to negotiate for, 29.171451 seconds).
    Sep 24 14:19:03 gateway racoon[90950]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
    It would seem that the response to the initial handshake is being blocked. However, serveradmin has this to say about ipfilter:
    gateway:/ *******$ sudo serveradmin settings ipfilter|grep VPN
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN ISAKMP/IKE:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP - Layer-Two Tunneling Protocol:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: IKE NAT Traversal:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ISAKMP/IKE:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:action = "allow"
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:readOnly = yes
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:protocol = "gre"
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:name = ""
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:dest-port = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:readOnly = yes
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:protocol = "esp"
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:dest-port = ""
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:oldDescription = "Layer-Two Tunneling Protocol (L2TP)"
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:dest-port = "1701"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:oldDescription = "PPTP VPN"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:protocol = "tcp"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:readOnly = no
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:name = ""
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:dest-port = "1723"
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:dest-port = "500"
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:dest-port = "4500"
    Which seems to be correct to me.
    As with the iChat problem, everything seems to be correct as reported by Server Admin. I have been hunting for the incorrect setting using serveradmin, but so far everything there seems to be correct as well.
    One last item that I just discovered today, and which is probably a huge hint (and I just don't know how to connect the dots), is that when I stop the VPN service (it's running on the gateway server), the entire office loses it's connection to the internet. Turn VPN back on, and the internet is back.
    I think my server is deeply, deeply disturbed, but I am not ready to wipe it clean and start over again. I sure would appreciate any insights on this one....

  • Eudora crashing since installing Security Update 2010-001

    Eudora has been crashing 100% of the time since I installed Security Update 2010-001 for Leopard.
    Is anyone else having this problem? Any suggestions for a resolution?
    Thanks.

    I see that, like most others, you prefer IMAP. I have used both but I prefer POP. Mixing them on one client can have unfortunate consequences. I don't like any sort of web interface to mail. IMAP is very useful if you need portability but I contend that POP can be more secure if used as I do:
    I access each account from time to time from more than one computer. Each computer acts as mail backup for the other as long as I remember to use each within my 122 day (4 month) setting. Since the computers are at different locations I have good protection from fire, disk failure or any other failure of my computers. A corrupt ISP employee can only access my emails for the last 4 months. To easily keep both clients the same I have a simple flat folder structure - one folder for each of the last 10 years.

  • Security Update 2010-005 won't install.

    I have an iMac4,1 with 2gig of RAM and OSX 10.6.5 and when I try to install Security Update 2005-005 I get a message that my volume does not meet requirements for this update. I know my OS is up to date. Could it be that my hardware is too dated? Do I need a newer model?

    BWS3RD wrote:
    Was trying to install Facetime which asks for Security Update 2010-005.
    Welcome to Discussions, BWS3RD
    The Security Update 2010-005 message is common for users who try to install FaceTime on a Leopard (10.5.x) Mac. The Mac FaceTime beta will not run in Leopard.
    Your posted system info shows that you use Mac OS X (10.6.5), but perhaps you are trying to install FaceTime on a Mac that does not meet FaceTime system requirements?
    The FaceTime product page http://www.apple.com/mac/facetime/ shows system requirements:
      "*Requires Mac OS X v10.6.4 Snow Leopard or later.*"
    I always suggest using the latest Snow Leopard version.
    If your posted Mac OS X (10.6.5) is correct, use the following method to apply the 10.6.5 Combo before attempting another FaceTime reinstall:
      • Backup your Mac and turn off Time Machine
      • Disconnect peripherals and restart Mac
      • Use Disk Utility to repair permissions
      • Download and install http://support.apple.com/kb/DL1324
      • Repair permissions again immediately following the restart that finishes the update.
      • Download and install a fresh copy of FaceTime
     (• Turn Time Machine on again when you are satisfied that everything works.)
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • Security update 2010-005 unable to install

    hi, I Just brought new Macbook pro.
    when i try to install facetime, prompt me to install the security update 2010-005, i downloaded and when i try to install this security update ask me to chose the installation destination, when i chose the Macintosh HD its prompt like this "Security U[date 2010-005) can't be installed on this disk. this volume does not meet the requirements for this update."
    please some one help me whats goes wrong, i m new to Macs

    Run Software Update, install everything that shows up, repair permissions, and restart. Once you do that, you shouldn't have any problem installing FaceTime. Then, peruse these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    Mac 101: Mac Essentials,
    Mac OS X keyboard shortcuts,
    Anatomy of a Mac,
    MacTips, and
    Switching to the Mac: The Missing Manual, Snow Leopard Edition.
    Additionally, *Texas Mac Man* recommends:
    Quick Assist,
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.

  • ClamAV and DNS Failure with Security Update 2010-005

    Hey everyone, got a bit of an issue.
    I'm running Leopard Server 10.5.8 and I've noticed a very odd issue with the latest security update, (2010-005).
    Since the update, whenever ClamAV goes out to check for new definitions and database updates, all of my DNS clients lose connection during the few minutes that it's working. I've verified this by watching the logs as the updates happen. Everything is fine, and the second that ClamAV starts running, DNS fails on all the clients, then starts again after the update process.
    Anyone else notice this? And more importantly, how should I go about disabling ClamAV, since I don't run a mail server off this particular server.
    Thanks!

    The System Info below your post indicates that you are running OS X 10.5.8. The FaceTime Beta requires a minimum of OS X 10.6.4.

  • Security Update 2010-005 for Facetime

    Hi,
    I have downloaded Face-time Beta to be installed on my iMac OS 10.5.8.
    During Installation i get a message that I need to install first "Security Update 2010-005 using software update"
    My software update shows no update required. Nevertheless, I have downloaded all 5 security updates and installed them one after the other, with no problems.
    Still i get the same message that Security Update 2010-005 needed when I try to install the Facetime.
    Can anybody knows a way out of this loop ? or how do I "Inform" the software update that the Security update 2010-005 is already installed ?
    thanks,

    Yes, you'd need to buy it - it's available widely for $29 (Apple store or resellers); you can then update to 10.6.4 - use the combo updater available here:
    http://support.apple.com/kb/DL1048
    (updates for an OS are available for free, but you do have to pay for the initial upgrade to another OS).
    Edit: And when you're doing the updates to 10.6.4, don't forget to repair permissions after each update.
    Message was edited by: Barbara Daniels1

  • Security Update 2010-005 Squirrelmail 1.4.20 timezones.cfg

    Was an update to Squirrelmail 1.4.20 included in the Security Update 2010-005?
    Is is just me or is everyone missing /usr/share/squirrelmail/include/timezones.cfg after this update?
    This causes an error when trying to access the Options > Personal Information.

    I manually updated to 1.4.20
    So *Security Update 2010-005* didn't contain an update to SquirrelMail but managed to break my install of SquirrelMail 1.4.20?
    I always use a sym-link so that automatic updates don't break my manual updates. But there must have been a script in the Security Update that erased the timezones.cfg file. Even if there was a SquirrelMail update included, why would it erase the timezones.cfg file?

  • Security Update 2010-005

    I noticed that I updated to the new Security Update 2010-006 BEFORE updating the prior one sent
    which is "2010-005" ( 005 versus 006 ), should I still go ahead and update the previous or is it
    pointless to do so. I worry about causing problems or if I need to go back somehow and redo both in order. Can someone please let me know! Thanks

    Strange I just noticed on the Downloads page http://support.apple.com/en_US/downloads
    that it shows
    *"Security Update 2010-006 (Snow Leopard)"*
    *"Security Update 2010-005 is recommended for all users and improves the security of Mac OS X."*
    But when you click on that link the 005 doesn't show up I guess it's an typo error but this is what
    makes things confusing when trying to update as I didn't notice it before but then noticed it tonight.
    I actually don't even see it in the downloads page anymore I have to actually click on the link from the Software Updater menu only. All I see is *Snow Leopard (Client) Security Update 2010-005*
    the "client" has me boggled are there 3 different Snow leopards (Server, Client, Server-Client)?
    This is cumbersome. I wonder if updating is even really necessary as each update takes more space, perhaps it's their way of making your computer slow so that your forced to keep buying more stuff from them etc.
    Message was edited by: Antone76
    Message was edited by: Antone76

  • Clamd fails after installing Security Update 2010-004

    A few months ago while running clamav-0.96, I began to get "Assertion failed" notices in my system log. But I applied a PowerPC patch available at clamav.net and that solved the problem. Later on, I updated to clamav-0.96.1 and everything continued running fine until yesterday when I installed Apple's Security Update 2010-004. Now I'm seeing the "Assertion failed" messages in my system log again just about every 10 seconds:
    Jun 17 07:55:17 nagxserveg5 net.clamav.clamd[686]: Assertion failed: (ResultPtr
    = -(1 << 23) && ResultPtr < (1 << 23) && "Relocation out of range!"), function
    relocate, file llvm/lib/Target/PowerPC/PPCJITInfo.cpp, line 399.
    Jun 17 07:55:19 nagxserveg5 ReportCrash[705]: Formulating crash report for
    process clamd[686]
    Jun 17 07:55:19 nagxserveg5 ReportCrash[705]: Saved crashreport to
    /Library/Logs/CrashReporter/clamd2010-06-17-075517NAGXServeG5.crash using
    uid: 0 gid: 0, euid: 0 egid: 0
    Jun 17 07:55:19 nagxserveg5 com.apple.launchd[1] (net.clamav.clamd[686]):
    Exited abnormally: Abort trap
    Jun 17 07:55:19 nagxserveg5 com.apple.launchd[1] (net.clamav.clamd): Throttling
    respawn: Will start in 1 seconds
    I tried reinstalling clamav-0.96.1 (configure/make/make install) and
    rebooted, but that didn't help. And attempting to reapply PowerPC patch, I just
    get the message that the patch is already applied. I have had to turn off virus scanning in ServerAdmin/Mail service in order to send/receive any mail. Otherwise, everything fails in virus scanning and just ends up sitting in my Mail Queue.

    Yes, but you also mentioned that you tried to apply the patch which is not needed
    Looks like a freshclam update broke things then. Until they reliably sort it, you can safely rebuild ClamAV using --enable-llvm=no or --disable-llvm (don't remember which one is correct off the top of my head).

Maybe you are looking for

  • How to link a value in a cell to a page number?

    I have a series of diagrams that I'd like to create a table for showing the page it's on, and a description of it. during creation, i an simply store the value of the page number in an array, and use it when creating the table, however, if the diagra

  • I can no longer connect to the internet via Airport Extreme.  HELP!

    Over the weekend my Macbook told me that my Airport extreme firmware needed to be updated, so I did that, now I have no internet connection from the Airport. I have no problem connecting to the Airport itself, but I have no actual internet connection

  • Why does my Mac ask for my password when I try to make a change on my external hard drive with Time Machine?

    I recently formatted the hard drive to do a fresh install of Mavericks on my Macbook Pro Retina. I then formatted my Western Digital 2 TB External Hard Drive for Time Machine. I then began storing others files and folders on the external hard drive a

  • Orcale Vs. SAP "Clear GL open items" ?

    Dears, I am new to oracle, previously I was using SAP, and I wonder if oracle have the same capability to view the GL entries as open items (non cleared entries), and if there is any possibility to clear B/S GL accounts. "such feature in SAP is calle

  • Creating a new HTML document - removing "todos"

    When creating a new HTML document in a KM repository (i.e. Folder > New > HTML File...), I get a form where I name my HTML document and enter the content etc. I can also choose, from a dropdown box, the document type between a Normal document or a "t