Project Definition Satr and end date

Hello
I have cretaed project with WBSE and Network Activities . Designed for Forward scheduling . The steps are as follows :-
1.After creating the Project Definition , system will provide start date i.e today's date.
2. After Creating Network activities with duration and providing relationships between the activities , then schedule the Project .
3. After scheduling the Project , end date of the project can be seen in the Project definition .
Issue is as follows :-
after confirming the activity , and reschedule the project , system is changing Project Definition start date as well as end date .
required start date should be fixed and end date should be changed according to confirmation of avctivity .
Can u pls suggest what settings are needed .
Regards
DMR

Hi DMRAO,
Please verify the value that is maintained for field 'Plan.meth/basic' on the control tab of the project definition (Planning Dates). It should be Top Down (using this method whenever a project is saved the system automatically checks the dates within the project structure, if time scheduling is not consistent then the project cannot be saved).
Regards,
Ammar

Similar Messages

Getting error while invoking ADF Start and End Dates

Hi,
I am new to developing ADF Application.
Into :
I am developing a search Page which has a select (drop down), startDate and endDate and a 'GO' Button
when user selects 'data from Drop Down', selects startDate and endDate and Presses 'GO' Button
Based on the Selected combination of Data i should get the Data.
Problem :
I am getting the following Error
WARNING: JBO-25058: Definition TheStartDate of type Variable not found in FastTelcoQueryTransactionDetailsVO1
What i have done / doing
Jspx -
<af:selectInputDate label="Start Date" value="#{FastTelcoTransactionBean.startDate}"></af:selectInputDate>
<af:selectInputDate label="End Date" value="#{FastTelcoTransactionBean.endDate}"></af:selectInputDate>
Bean File
I am converting the this.startDate and this.endDate (both Date format) (which i have taken startDate & endDate as Dates and Generated Getters & Setters for them ) to String format.
DateFormat.getDateTimeInstance(DateFormat.SHORT, DateFormat.SHORT).format(this.startDate);
map.put("_startDate", startDate);
map.put("_endDate", endDate);
VOImpl File
public void getTransStartEndDate(Number transTypeId, String startDate, String endDate)
TransactionDetailsVOImpl QueryVO = getQueryTransactionDetailsVO1();
QueryVO.setNamedWhereClauseParam("MstTransTypeId", transTypeId);
QueryVO.setNamedWhereClauseParam("TheStartDate",_startDate);
QueryVO.setNamedWhereClauseParam("TheEndDate",_endDate);
QueryVO.executeQuery();
BindVariables Used
TheStartDate - String format
TheEndDate - String format
SQL Query in VOIMPL - JDEV
SELECT DISTINCT
TransactionDetail.TRANS_TYPE_ID,
MstTransaction.TRANS_DESC,
TransactionDetail.TRANSACTION_NUMBER,
TransactionDetail.CREATOR_NAME,
TransactionDetail.CREATOR_EMAIL,
TO_CHAR(TransactionDetail.TRANS_DATE, 'MM/DD/YYYY hh:mm:ss') TRANS_DATE,
Error.ERROR_SH_MSG,
Error.ERROR_DETAIL_MSG
FROM
TRANSACTION_DETAIL TransactionDetail,
MST_TRANSACTION MstTransaction,
ERROR Error
WHERE
(TransactionDetail.TRANS_TYPE_ID = MstTransaction.TRANS_TYPE_ID)
AND (TransactionDetail.ERROR_ID = Error.ERROR_ID)
AND MstTransaction.TRANS_TYPE_ID=(:MstTransTypeId)
AND MstTransaction.IS_NOTIFICATION_REQ='Y'
AND TransactionDetail.TRANS_DATE BETWEEN (TO_DATE((:TheStartDate), 'MM/DD/YYYY')) AND (TO_DATE((:TheEndDate), 'MM/DD/YYYY'))
order by TRANS_DATE
NOTE : TheStartDate & TheEndDate are not in Attribute list of JDEV
i think i made it clear ...
anybody as a solution or Idea please provide
Thanx in advance
regards,
anvv sharma

Hi,
I have started developing the code with the following SQL Query -
Query 1
SELECT DISTINCT
TransactionDetail.TRANS_TYPE_ID,
MstTransaction.TRANS_DESC,
TransactionDetail.TRANSACTION_NUMBER,
TransactionDetail.CREATOR_NAME,
TransactionDetail.CREATOR_EMAIL,
TO_CHAR(TransactionDetail.TRANS_DATE, 'MM/DD/YYYY hh:mm:ss') TRANS_DATE,
Error.ERROR_SH_MSG,
Error.ERROR_DETAIL_MSG
FROM
TRANSACTION_DETAIL TransactionDetail,
MST_TRANSACTION MstTransaction,
ERROR Error
WHERE
(TransactionDetail.TRANS_TYPE_ID = MstTransaction.TRANS_TYPE_ID)
AND (TransactionDetail.ERROR_ID = Error.ERROR_ID)
AND MstTransaction.TRANS_TYPE_ID=(:MstTransTypeId)
After that there is a change in the Requirement to add "Start Date" and "End Date" with a "Go Button" --> Clicking on this Go Button displays the Data Based on
"Drop Down" box, "Start Date" & "End Date" --> Corresponding Data is Picked From Database and Displayed....
Now, i have Updated the VO (From JDEV Design Time) with the latest Updated Query (added Start Date and End Date in the Query),
also check the Corresponding XML file is also Updated with the latest Query.
Query 2
SELECT DISTINCT
TransactionDetail.TRANS_TYPE_ID,
MstTransaction.TRANS_DESC,
TransactionDetail.TRANSACTION_NUMBER,
TransactionDetail.CREATOR_NAME,
TransactionDetail.CREATOR_EMAIL,
TransactionDetail.TRANS_DATE,
Error.ERROR_SH_MSG,
Error.ERROR_DETAIL_MSG
FROM
TRANSACTION_DETAIL TransactionDetail,
MST_TRANSACTION MstTransaction,
ERROR Error
WHERE
(TransactionDetail.TRANS_TYPE_ID = MstTransaction.TRANS_TYPE_ID)
AND (TransactionDetail.ERROR_ID = Error.ERROR_ID)
AND MstTransaction.TRANS_TYPE_ID=(:MstTransTypeId)
AND MstTransaction.IS_NOTIFICATION_REQ='Y'
AND TransactionDetail.TRANS_DATE BETWEEN (TO_DATE((:TheStartDate), 'YYYY-MM-DD')) AND (TO_DATE((:TheEndDate), 'YYYY-MM-DD')) order by TRANS_DATE
So now at Design Time i have Query 2, but Strangely at RUN Time Query 1 is Excecuting asking for "Start Date" Binding Variable NOT Found (as there is no Start Date Bind Variable in Query 1)
for this i have to re-Design the required Part...to make it work
can any body explain why it behaved like this ??
regards,
anvv sharma

Contract Start and End Dates in Sales Order

Hi
I have a situation where a service item is bundled with a deliverable item. The order is as follows
Line Item    Mat                                                                 Qty            Higher Level Item
10              Item No.1 (Physical Item)                                  1
20              Item No.2 (Service Item)                                    1               10
For the deliverable item 10 , Revenue is recognized immediately. For the Service item no.20 , revenue needs to be recognized over a period of 1 Year (It is a 1 year service contract).
The whole order is created via BAPI from an external 3rd party order capture system.
In order to do revenue recognition properly for service items , SAP I believe has 2 options
1. Based on Billing plan dates
2. Based on contract start dates
Since order with both the line items need to produce 1 invoice, I cannot use billing plan . The only other option is to use contract start and end dates. I have enabled contract data at the sales order level. So when I enter the contract start and end dates manually at the line item level and set the item category to recognize revenue based on contract start and end dates based on time-based revenue recognition it is working fine.
But I need a way to automate the population of contract start and end dates at the line item level. My ABAP guy is not able to find a user exit that can change the XVEDA or any VEDA structure in any of the user exits.
I guess the SAP SD gurus out there would have definitely dealt with a situation of product bundling (Service and non-service items in the same sales order with one billing document , but seperate revenue recognition for service and non-service items)
Please help.
Thnx
Siva

Hi Siva,
Kindly let me know what criteria you want to give for automatic population of start date of contract...
Standard SAP comes with a few baseline dates for contract start date and we can control this from customization itself.
01     Today's date
02     Contract start date
04     Acceptance date
05     Installation date
06     Date contract signed
07     Billing date/Invoice date
08     CntrctStDate+contract duration
09     Contract end date
If you have some criteria which is not covered here, then let me know and i will try to provide some help then.
Thanks
Kapil Sharma

How to create start date and end date

Hi guys
Need to create start date and end date as prompt in webi report.... how could it be possible please help me ...
regards

@Universe:
Go to Condition/Filter:
Definition: Date=@Prompt("Select Start Date",D,,mono/multi,free/constrained,...)
OR @Select(Class\Object Date)=@Prompt("Select Start Date",D,,mono/multi,free/constrained,...)
Parse it & Apply OK.
Class/Object : If you have already object Date in any class already, use them.
Follow the same for End date also.
For both filters/prompts, check Apply on Universe
@Report/Query:
Drag [Date] object to Query filters section and in Operand say Prompt. Change text as Select Start Date & again drag [Date], this time say Select End Date.
Hope it helps you alot.
Gracias...!!

Report for Validity Start and End Date in PO

Dear All
Is there any report where I can get PO validity start and end date which user input in addtional data header tab of PO?
Regards
Satish Kumar

Hi,
Yes, It is available standard report using T-code ME2N - Purchasing Document (PO) Per Document Number, enter the T-code and provide the following input data's are as follows.
Scope of List                 : ALV ( for Ms-Excel format report)
Plant                               :   __________ to __________ (if required)
Document Date              : ____________ to ___________ (if Required)
Execute the report shown by default in excel format and if required PO validity start and end data, you have to select Change Layout button and open new window options screen right side field option as Validity Per.Start, Validity Period End, Commutative number field data's are selected and click <--- arrow button and then click bottom tick marked button. Now, the report shown your requirement.
Hope, it is useful for you,
Regards,
K.Rajendran

How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

Hope someone can help. I have tried to find the best way to do this and can't seem to make sense of anything. I'm using an Access 2013 Database and I have a report that is based on a query. I've created a Report Criteria Form. I
need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date. I then need my report to return only the records that meet all selected criteria. It works fine with a ComboBox and 1 selection but can't
get it to work with a List Box so they can select multiple items. Any help is greatly appreciated while I still have hair left.

The query should return all records.
Let's say you have the following controls on your report criteria form:
txtStart: text box, formatted as a date.
txtEnd: text box, formatted as a date.
lbxMulti: multi-select list box.
cmdOpenReport: command button used to open the report.
The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
The report to be opened is rptReport.
The On Click event procedure for the command button could look like this:
Private Sub cmdOpenReport_Click()
Dim strWhere As String
Dim strIn As String
Dim varItm As Variant
On Error GoTo ErrHandler
If Not IsNull(Me.txtStart) Then
strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
End If
If Not IsNull(Me.txtEnd) Then
strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
End If
For Each varItm In Me.lbxMulti.ItemsSelected
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
Next varItm
If strIn <> "" Then
' Remove initial comma
strIn = Mid(strIn, 2)
strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
End If
If strWhere <> "" Then
' Remove initial " AND "
strWhere = Mid(strWhere, 6)
End If
DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
Exit Sub
ErrHandler:
If Err = 2501 Then
' Report cancelled - ignore
Else
MsgBox Err.Description, vbExclamation
End If
End Sub
If SomeField is a text field instead of a number field, change the line
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
to
strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
Regards, Hans Vogelaar (http://www.eileenslounge.com)

To get first date and end date after entering any month and year

Hi,
I need to to get first date and end date of a month and year in yyyyMMdd format. I am reading month and year from a properties file. But I don't know how to get the first date and End date in given format. The properties file gives me just text. But I don't know how to get the date format using this. I need this urgently. Can anyone help me to get code for this?
I am reading the fields as,
Properties props = new Properties();
props.load(new FileInputStream("AnyMonthVolume.properties"));
String date_month = props.getProperty("date_month");
String date_year = props.getProperty("date_year");
Thanks.

I know this has been posted a while ago but incase someone looking for it, here is the code to get the end of current month date.
Calendar cal = Calendar.getInstance();
     cal.setTime(new java.util.Date());
     cal.set(Calendar.DATE, 1); //set the date to start of month
     cal.add(Calendar.MONTH,1);
     cal.add(Calendar.DATE,-1);
System.out.println(cal.getTime());

How to calculate first date and end date of this year in Query

Hi Expert
I want to calculate following dates with inputted date in query.
I have no knowledge on ABAP and I just can create a query with simple logic.
Could you teach me how to calculate following date?
(If inputted date is April 12 2009)
- First date of this year (Ex January 1 2009)
- End date of this year (Ex December 31 2009)
- First date of last year (Ex January 1 2008)
- End date of last year (Ex December 31 2008)
- First date of this month (Ex April 1 2009)
Thank you!
Take

HR_JP_MONTH_BEGIN_END_DATE use this FM to get the begin and end date of the Date you are passing. eg when u give input as 04/12/2009, it will return
04/01/2009 as begin date
04/30/2009 as end date
pass the Year in this FM HR_E_GET_FISC_YEAR_DATES, you will get the Fiscal year Begin and End Dates
Abh

SNP Planned order start and end dates are not calculated correctly

Hello SNP Guru's
The SNP planned orders generated after the Heuristics run, have a start and end date based on the Activity Duration (Fixed), while the resource consumption is based on the Bucket Consumption (Variable), which is correct.
The Activity Duration (Fixed) is based on the BOM Base Quantity. So if the Activity Duration = 1 day, and if the order quantity is more than a day, the start and end dates, still shows as 1 day. So no matter what is the order quantity, the start and end dates is always = 1 day.
Does anyone have any experience in implementing any code to change the start and end dates on SNP Planned Order?
Seems like it should work as standard.
Am i missing something?
Thanks,
Mangesh

Dear Mangesh,
SNP is a infinite planning tool. If you have defined fixed duration to be 1 DAY in the activity, no matter how many quantity you input for your planned order, the order will last for one day. If the resourced is overloaded, you then run capacity levelling to
banlance the capacity. What your expected beahavior happens in PPDS planning.
Claire

Scheduling start date and end dates

Hello Gurus,
I am trying to understand the schedule start date and schedule end date functionality in Plant Maintenance. I do understand the basic start and end dates. Currently I set up u201C3.Do not adjust basic dates, dep rqmts to order startu201D and set the scheduling type as u201CForwardsu201D . Please note we donu2019t do any capacity planning or leveling.
So my question is, why the scheduling start date is defaults to the basic start date for forwards and scheduling finish date defaults to basic finish date for backwards ? I tried adding couple of operations and save the work order. It did not change anything in schedule dates.
Do we really need to care about scheduling dates if we donu2019t use capacity planning ?
Please advise
Mahee

Hi,
As per priority, final dates would be calculated as we will define the duration based on the priprity. Either current date or basic date only applied to Scheduling start date.
You can change the scheduling start date so that based on priority, final date would be calculated.
Regards,
Maheswaran.

How to get the current month starting date and ending date by default ?

Hello Creators,
This is my requirement, kindly do the needful, Please dont gimme any links i've no access for other sites, gimme the right solution.
My Requirement :
Creation Date (VBAK-ERDAT) - Select Option. By default, the program should run for the current Month ie between the starting and ending date of the current month when the program is run. Today the date is 18th using sy-datum we can bring the current date by calling it in the initialization event, but the requirement is it should not give me the current date, it should only give me the month starting date and the end date. Kindly help.
Thanks in advance ...

DATA: gv_datum LIKE vbak-erdat.
SELECT-OPTIONS: so_date FOR gv_datum.
INITIALIZATION.
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
    EXPORTING
      iv_date             = sy-datum
    IMPORTING
      ev_month_begin_date = so_date-low
      ev_month_end_date   = so_date-high.
so_date-option = 'BT'.
APPEND so_date.
START-OF-SELECTION.
Hope this solves the issue. Don't forget to be generous
Cheers,
Sougata.

SAP Work Manager 6.0 - Creating notification on mobile device (customizing the default Start and End date)

Dear all,
When I create a notification in SAP Work Manager 6.0, the notification gets created in the back-end with Start Date equal to Current Date + 1 day and End Date equal to Current Date + 3 days.
Can you advise where I can customize this behaviour, so that the Start Date is for example equal to the Current Date and End Date being 14 days in the future? Is this something that would need to be configured in Agentry Editor or within the ABAP stack?
Many thanks for your support.
Pavel
Tags edited by: Michael Appleby

Hi Jason,
We went this route and identified the initial values, and tried to modify those.
No impact though, as if those values are being overwritten elsewhere (whatever value we set, no change on the backend).
Please see the attachments with screenshots of Agentry Editor.
Many thanks.
Pavel

Search on basis of start date and end date

Hi,
I have added two fields 'Start Date' and 'End Date' on a search page.
I have done the VO extension also.
Now, I have to implement search logic to get all the records created in between 'Start Date' and 'End Date' after pressing the 'GO' button on that page.
Can anyone please provide guidance to extend the controller.
Thanks in advance.
Gaurav.

Hi Anil,
Thanks for ur reply.
As per the link, I have written following code in the controller :
package oracle.apps.irc.vacancy.webui;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;
public class xxVacancyCriteriaCO extends VacancyCriteriaCO
public xxVacancyCriteriaCO() {}
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
// Pressing the Go button causes the search to be executed.
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
OAViewObject oaviewobject = (OAViewObject)am.findViewObject("XXIrcVacancySearchCriteriaVO");
if (pageContext.getParameter("Go") != null)
String created = pageContext.getParameter("ViewDate");
oaviewobject.setWhereClauseParam(0, created);
oaviewobject.executeQuery();
OAAdvancedTableBean table = (OAAdvancedTableBean)webBean.findChildRecursive("ResultsTable");
table.queryData(pageContext, false);
But while compiling it, I am getting the error as :
"Error(14,42): PerTransactionTopCOImpl not found in class oracle.apps.irc.common.webui.IrcOAControllerImpl in class oracle.apps.irc.vacancy.webui.VacancyCriteriaCO in class oracle.apps.irc.vacancy.webui.xxVacancyCriteriaCO"
Can u please suggest where the mistake is?
Thanks again.
Gaurav.
Edited by: Gaurav on Jan 14, 2011 12:51 AM

URGENT REPORT START AND END DATE

GUYZ help me how to generate a report with start date and end date, two text item or calendar rpresent start and end date, it will generate only the start to end date... plzz put the code guyss..
this is my code when i call my report in runtime only in client server .. i want to generate it wit start and end date but dunno newbie ..
Declare
v_Rep varchar2 (30);
repid report_Object;
begin
repid:=find_report_object('dept');
v_rep:=run_report_object(repid);
end;

Check this sample Code..
DECLARE
pl_id ParamList;
pl_name VARCHAR2(10) := 'repdata';
BEGIN
pl_id := Get_Parameter_List(pl_name);
IF Id_Null(pl_id) THEN
pl_id := Create_Parameter_List(pl_name);
Add_Parameter(pl_id, 'P_STARTDATE', TEXT_PARAMETER,:BLK_CTRL.P_TODATE);
Add_Parameter(pl_id, 'P_ENDDATE', TEXT_PARAMETER, :BLK_CTRL.P_CURRENCY);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
ELSE
Destroy_Parameter_List( pl_id );
END IF
RUN_PRODUCT(REPORTS, 'D:\MMRROLDL.RDF' ,SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id ,NULL);
END;

Calculate Start and End date in Connect By -- When Hirerchy Changes

/* Formatted on 5/20/2013 9:53:00 AM (QP5 v5.115.810.9015) */
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Hello , Can some one Please help me or Guide me in calculating Start and End dates for the below logic
I want to calculate the Manager Hirerchy for the given Agent.
Then Below Query is working fine and its giving me the desired results
But when there is a change in the Manager Hirerchy or Manager gets Promoted
Then i need to calculate the start date and end date.
CREATE TABLE PERSON_DTL
SID                 VARCHAR2(10 BYTE),
EMP_MGRS_ID         VARCHAR2(10 BYTE),
START_EFFECTIVE_DT DATE,
END_EFFECTIVE_DT    DATE
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M100', 'M107', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M101', 'M102', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('A100', 'M100', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M100', 'M101', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M107', 'M102', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M102', 'M103', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M103', 'M104', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('A101', 'M105', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M105', 'M106', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
SELECT   CONNECT_BY_ROOT (b.sid) agent_sid,
             TRIM (
                LEADING ',' FROM    SYS_CONNECT_BY_PATH (b.sid, ',')
                                 || ','
                                 || b.emp_mgrs_id
                PATH,
             START_EFFECTIVE_DT Start_dt,
             END_EFFECTIVE_DT End_dt
      FROM   PERSON_DTL b
     WHERE   CONNECT_BY_ISLEAF = 1
START WITH   sid IN ('A101', 'A100')
CONNECT BY   PRIOR b.emp_mgrs_id = b.sid
This is the results that i am getting now.
AGENT_SID    PATH                       START_DT    END_DT
A100    A100,M100,M101,M102,M103,M104    1/1/2010    12/31/9999
A100    A100,M100,M107,M102,M103,M104    1/1/2010    12/31/9999
A101    A101,M105,M106                   1/1/2010    12/31/9999
Results Required
A100    A100,M100,M101,M102,M103,M104    1/1/2010    5/18/2013
A100    A100,M100,M107,M102,M103,M104    5/20/2013   12/31/9999
A101    A101,M105,M106                   1/1/2010    12/31/9999

May be this..
SQL> select agent_sid,max(path) path,max(start_dt) start_dt,
2         min(end_dt) end_dt
3 from
4 (
5    select agent_sid,path,start_dt,end_dt,
6           sum(flg) over(order by rn) sm
7    from
8    (
9      select agent_sid,
10             path,
11             start_dt,
12             end_dt,rn,
13             case when path like lag(path) over(order by rn)||'%' then 0 else 1 end flg
14      from
15      (
16        SELECT   CONNECT_BY_ROOT (b.sid) agent_sid,
17                 TRIM (
18                    LEADING ',' FROM    SYS_CONNECT_BY_PATH (b.sid, ',')
19                                     || ','
20                                     || b.emp_mgrs_id
21                 )
22                  PATH,
23                 START_EFFECTIVE_DT Start_dt,
24                 END_EFFECTIVE_DT End_dt,rownum rn
25        FROM   PERSON_DTL b
26        START WITH   sid IN ('A101', 'A100')
27        CONNECT BY   PRIOR b.emp_mgrs_id = b.sid
28      )
29    )
30 )
31 group by agent_sid,sm
32 order by agent_sid;
AGENT_SID PATH                                     START_DT END_DT
A100       A100,M100,M101,M102,M103,M104            01-JAN-10 18-MAY-13
A100       A100,M100,M107,M102,M103,M104            20-MAY-13 31-DEC-99
A101       A101,M105,M106                           01-JAN-10 31-DEC-99Edited by: jeneesh on May 20, 2013 7:54 PM
Not thoroughly tested.And not sure whether an easy way exists..

Project Definition Satr and end date

Similar Messages

Maybe you are looking for