Project explorer doesn't show callers for .rtm (run time menu) files (is this a confirmed bug?)

Maybe I was to quick to report this as a bug... I was unable to find anything related to it at my normal sources of information. Does someone has exeperience with it?
I have a work-around and this is included in the description :
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=6776 (message 25)
** Original post **
When a library (.lvlib) that contains a file with a run-time-menu (.rtm) file is removed from the project, but there is still a file that uses this .rtm file, both the .lvlib and all of it's vis and the .rtm file are displayed in the project Dependencies.
For the Vi's the callers can be found by 'Find->calllers'. For the .rtm file this always results in 'No items found' but the .rtm file remains in the Dependencies (as it should since it is still used).
Finding the .rtm file can be hard since it is only loaded at run-time and not at edit time(?). If someone encounters this issue, a working method:
- rename the rtm file (so it cannot be found)
- open the vis that you suspect are using this file AND try to edit the run-time menu. When this vi uses the run-time menu a warning will appear (cannot load rtm file, using default menu instead)
Kind regards,
Mark

Dear Mr. Beuvink,
thank you for your reply. It seems that a while back this problem has been reported to our R&D group. The request (CAR) has ID; 41579. There is the following statement in this CAR: the caller vi is in memory or not. When a caller vi is in memory, rtm files will currently never report the vi as a caller. This confirms the behavior you are seeing.
I'm sorry to say I don't have a solution at this moment, at this moment they are busy fixing this problem. You can look this up in future release notes by searching on the CAR ID I mentioned.
If you haven any questions, please don't hesitate to contact me.
Best regards,
Martijn S
Applications Engineer
NI Netherlands

Similar Messages

Has NI plans to develop CVI for WinCE run time engine?

Has NI plans to develop CVI for WinCE run time engine?

At this point, LabWindows/CVI does not have plans to support Windows CE. There are many reasons we do not have plans for support, but two main reasons are:
Windows CE uses a different kernel from other Windows operatings systems.
Windows CE does not support the full WinAPI.
National Instruments
Product Support Engineer

My ipod touch 4g doesn't show option for os update in setting-general page. Can i update it via itunes by connecting it to computer?

My ipod touch 4g doesn't show option for ios update in setting-general page. Can i update it via itunes by connecting it to computer?

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode ue one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

[svn:osmf:] 17940: Fix FM-982: MAST plugin doesn' t show preroll for F4M resources.

Revision: 17940
Revision: 17940
Author:   [email protected]
Date:     2010-09-29 14:47:13 -0700 (Wed, 29 Sep 2010)
Log Message:
Fix FM-982: MAST plugin doesn't show preroll for F4M resources.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-982
Modified Paths:
    osmf/trunk/plugins/samples/MASTPlugin/org/osmf/mast/MASTPluginInfo.as
    osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/MASTPluginInfo.as

[svn:osmf:] 17941: Fix FM-981: MAST plugin doesn' t show preroll for SMIL resources.

Revision: 17941
Revision: 17941
Author:   [email protected]
Date:     2010-09-29 15:04:11 -0700 (Wed, 29 Sep 2010)
Log Message:
Fix FM-981: MAST plugin doesn't show preroll for SMIL resources.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-981
Modified Paths:
    osmf/trunk/plugins/samples/MASTPlugin/org/osmf/mast/MASTPluginInfo.as
    osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/MASTPluginInfo.as

I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code>

ITunes doesn't show updates for those Apps synchronized from iPhone

For example, if I download 3 apps through itunes, then download and install 2 apps on my iphone. After synchronizing the PC and iphone, both of them have 5 apps. Once all of them have updates available, the app store on my iphone can show 5 updates, but iTunes only shows 3 updates, it doesn't show updates for the other two apps. Is it a setting issue? please help me if anyone has answer. Thank you.

I am syncing on my MacBook that I have had for about two months...?

Custom Run Time Menu (.rtm) for a tree control doesn't appear in LV executable

Hello,
I am using a custom run time menu (.rtm) for a tree control in LV. When I right click on the control the run time menu appears in the LV development environment. However the run-time menu does not appear when run the executable installed by the installer I created. I tried including the .rtm file with the installer, but it did not fix the problem.
Please let me know if any ideas.
Thanks,
Russell

This is a known issue and has been reported to our R&D engineers for further investigation (CAR# 3T2E57V2). The workaround is to embed the run-time menu in the control instead of the separate .rtm file. To do this, make a minor change in the shortcut menu (for instance, add a dummy item then delete it), so that the shortcut menu editor will ask you to save the new menu. When it prompts you, choose to save it with the control instead of to file.

How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

Custom Run-Time Menu error when named "FileMenu.rtm"

Discovered an interesting "feature" (error?) in LabVIEW 2009 when using custom run-time file menus.
If you create a custom run-time menu (.rtm) and name it "FileMenu.rtm" the menu will not function correctly in executable format.
In my LabVIEW Project, any VIs which called this custom file menu worked correctly in the project, but when I built an executable, the VIs defaulted to the default file menu. This was not due to a corrupted .rtm file or the file not being included in the executable. Instead after extensive debugging I determined that the name "FileMenu.rtm" is somehow reserved in LabVIEW and any executables that are built have the custom run-time menu overwritten by the default. The tricky part of this error is that it goes unnoticed while the code is still in development and only presents itself after being built into an executable.
Simply changing the name of the file fixed the executable run-time menu.

Chris,
Thanks for trying it out. It seems that my forum post may have been a bit rushed.
I tried to duplicate the problem in a new project from scratch and similarly was unable to reproduce it. I will try more soon, and in doing so perhaps reveal the true underlying problem. I would post the original code but it is proprietary.
I was running LabVIEW 2009 and Windows XP when the problem first presented itself. I updated to LabVIEW 2009 SP1 as part of my debugging and the problem still presented itself.
V/R,
~David

System requirement for Labview run-time engine 8.6

Hello
is there any system requirements for LabVIEW Run-time engine 8.6? for example, same system requirements for LabVIEW 8.6? Internet Explorer 5 is fine? or Internet Explorer 6.0 or higher is fine? Does it work for Firefox on an Athena Linux mechine?
Thanks
Cynitha
Solved!
Go to Solution.

The system requirements can be found in the Release Notes. Pages 2 and 3 indicate the specific requirements for the Run-Time Engine per platform.

Executable not working - Looking for LabVIEW Run-Time Engine

This has been one of those days.
I'm trying to create my .exe file to place onto another computer. I've done this before with success. But that was then and this is now.
I believe I have all the files I need in my LLB, and I believe I did my application distribution correctly and I believe I built the DLL correctly. But when I took the resulting .exe file and placed it on another computer and attempted to run it, it gave me the error message: "Unable to locate LabVIEW Run-Time Engine. Program requires a version 7.1 (or compatible) LabVIEW Run-Time engine. You should have already realized this, you moron."
Anyone have any idea where I went wrong or what step I might have missed? This has been a crazy, non-stop, massive brain fart of a day and I can't seem to remember what I'm missing here.
Amateur programmer for over 10 years!

Hi.
Whenever you want to use executables or .dll's created with LabVIEW you must make sure that the LabVIEW runtime engine of the SAME version as the LabVIEW version used to create the files, is installed in the target computer.
There are basically 2 ways to get the run-time engine installed on a computer:
1. (the one I prefer): Download the correct version of the LabVIEW run-time engine installer from www.ni.com/downloads, or more specifically from
http://digital.ni.com/softlib.nsf/websearch/369618104E25B08E86256F54006A4E2F?opendocument&node=132050_US
for the latest one. Once you have the installer for the run-time engine, just install it in the target computer. I prefer this option because the run-time engine is installed independently, so if you then uninstall your program, the run-time engine remains.
2. Create an installer for your program that includes the run-time engine. To include the run-time engine, when you are creating your application, go to the "installer settings" tab, click on "Advanced" and make sure there is a checkmark on "include LabVIEW run-time engine". This way when you install your program in the target computer, the run-time engine will also be installed.
Just as a note, any computer with LabVIEW on it, will also have the run-time engine.
Good luck.
Alejandro

Help for run-time menu localization

I would like to dynamically change the run-time menu according to the predefined language setting. For example, if the setting (may be set up in a txt file) is German, then when the application is running, it automaticall display a german menu. if the setting is spanish, the menu will change to spanish display. Any help will be appreciated.

The attached VI can dynamically change the run-time menu and short-cut menu based on language.
帖子被ttrr在07-24-2006 09:12 PM时编辑过了
Attachments:
Multi Language Menu.zip ‏13 KB

Run time menu for row headers

Is there any way to have run time menu only for the row headers and not the whole of the table?
Thanks,
Ritesh

Event Structure -> Mouse Down on Table Event -> Button
Message Edited by Eugen Graf on 09-25-2008 04:52 AM
LabVIEW Portal
Attachments:
Button.png ‏7 KB

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

Hello All: What to thank everyone in advance for taking the time to respond to this post: We just had a 600 laptop image delopoyment of macbook pro's and since we were rushed to do this in one day-. i forgot to connect them to wireless before creating

Hello All:
What to thank everyone in advance for taking the time to respond to this post:
We just had a 600 laptop image delopoyment of macbook pro's and since we
were rushed to do this in one day…. i forgot to connect them to wireless before
creating an image. (worked from 5am ~ 5 am)
DOES ANYONE KNOW HOW TO create a login script, where to place it,
and how to push out wireless setting so when a user logs in, it would automatically
bind them to a certain wireless?
We want to strictly do this through our Mac os x server snow leopard.
Please help as I am going back this Sunday to resolve this. I will have to
manually open up 600 laptops and add them to the wireless if i don't
find out a solution.

THANKS A BUNCH!
BUT!!!
can you help me create a script with this information.
You led me to the right direction. I will be using mac os x server and doing login script.
here is what i typed up so far but i don't know how to make the file. I know the command to run throgh shell but do not know how to make the file run so when i put it in login script it will place this wireless setting on all computers.
They are ging to be using this information:
/usr/sbin/networksetup -addpreferredwirelessnetworkatindex Airport atams 0 WPA2 [F3fd+mi7yV]]
/usr/sbin/networksetup -setairportnetwork Airport atams F3fd+mi7yV
-removepreferredwirelessnetwork Airport heritage
I did this on terminal and it worked. so how can i know deploy this to all laptops that are directly plugged in.

Project explorer doesn't show callers for .rtm (run time menu) files (is this a confirmed bug?)

Similar Messages

Maybe you are looking for