Project Information Window?

How do I open the Project Information window in order to reorganize the memory? Where is the key command to open the project window?

Additional Info to save time...
In LPX using the default US Key Command Set.... you must assign a key to that Key Command to see the Project Info screen....
LPX Menu Item..... Logic Pro X / Key Commands / Edit....
Next... in the key Command edit window that will open.. search for Project Information...
...and then assign a key..
I use the "Learn by Key label" method and then just press the key combo I wish to assign.
The assignment I choose is SHIFT + OPT + CTRL + P but you can assign whatever you like so long as it's not already used....
In LP9 (Or the LP9 Key Command set if used in LPX) the default Key Command is CTRL + D
Note: In LPX default US Key Command Set... CTRL + D is used for another key command.

Similar Messages

Captivate Project Information window on Flash player

I published a Captivate Project as an executable file for
Macintosh. When I click on the SWF file, it opens up in the Flash
player, and not in my browser. Also, the Project Information window
does not go away, even when I click on the close button. Some of
the buttons on the navigation bar don't work either, like Exit and
Forward. Has anyone come across this problem?

The purpose of beta software is to find potential problems. You have just found one, and you should report it back to the beta team.
If you think it is a Flash Player bug, report it at https://bugs.adobe.com/flashplayer/
If Flash Player works fine on the release version of Firefox, then I suggest that you reinstall that version.

Project information window always show

Greetings,
I published a Captivate project (a simple recording) as a
Flash movie and it is used in an Authorware project. When the movie
plays in the Authorware file, the Project Information Windows shows
from the beginning and it never goes away, even when I click its
close button.
A similar question was asked in this forum in July 2007, but
it was not answered.
Any tip will be much appreciated!
Thank you,
Laurence

Additional Info to save time...
In LPX using the default US Key Command Set.... you must assign a key to that Key Command to see the Project Info screen....
LPX Menu Item..... Logic Pro X / Key Commands / Edit....
Next... in the key Command edit window that will open.. search for Project Information...
...and then assign a key..
I use the "Learn by Key label" method and then just press the key combo I wish to assign.
The assignment I choose is SHIFT + OPT + CTRL + P but you can assign whatever you like so long as it's not already used....
In LP9 (Or the LP9 Key Command set if used in LPX) the default Key Command is CTRL + D
Note: In LPX default US Key Command Set... CTRL + D is used for another key command.

Changing "file type" in Link Information Window (CS3)

Hola,
I am having a problem in Indesign (CS3), and I was wondering if anyone here might be able to help.
I'm a student updating an older .INDD file for a 47 page book. The pages were all updated as .AI files, but for some reason
3 of the pages in our InDesign document were assigned a .PDF "file type" in the Link Information window. When I try and "Relink" to the updated .AI files,
the program won't link to the .AI file. It will properly re-link to a .PDF version of the file.
Is there a way to reset that "file type" in the Links Window from .PDF to .AI?
Ultimately I can use .PDF versions for this, but I'd prefer to have them all .AI files.
That would be cleaner and easier for the next students down the road who are going
to inheriet this project. It seems like this should be an easy thing to do, but I can't figure it out...
Thank you very much for any information you can provide.
¡Muchas gracias!
Javier

Hola,
Thank you for the quick reply! I now suspect that I didn't correctly identify the problem.
In the Links Panel for 44 of the 47 pages, they read pathname/*.AI, so no problem there (although the file type is also .PDF in the link window for those 44 pages that can link to the .AI).
For three of the pages though, when I try and link them to pathname/*.AI, I get an error message in the document that indicates that "this is an Adobe Ilustrator file that was saved without PDF content". When I relink those three to pathname/*.pdf, they work.
So I'm thinking at this point that the problem isn't Indesign, but with the original .AI files that I'm trying to link to. I also suspect that my original idea to change the "file type" in the Links Panel to ".AI" is incorrect, since it's a .PDF file type for all of the 47 pages in this document!
¡Muchas gracias!
Javier

Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support. Have tried reinstalling

final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed. Have tried reinstalling, default settings etc
Appreciate suggestion, working on deadline. Thanks.

Here is the start of the crash report:
Process:         Final Cut Pro [20568]
Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCut
Version:         10.0.1 (185673)
Build Info:      ProEditor-185670300~1
App Item ID:     424389933
App External ID: 4138831
Code Type:       X86-64 (Native)
Parent Process: launchd [102]
Date/Time:       2011-11-11 20:41:32.201 -0800
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          192058 sec
Crashes Since Last Report:           14
Per-App Interval Since Last Report: 157161 sec
Per-App Crashes Since Last Report:   14
Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
VM Regions Near 0x280000003:
    CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM
-->
    STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL stack guard for thread 0
Application Specific Information:
objc[20568]: garbage collection is OFF

Cannot see Project Assets Window

When I open certain projects, the Project Assets Window is no longer showing when I click on the arrow that is supposed to open the window. I've re installed twice, run ccleaner, and deleted the prefs file 2 times. The window only opens on two project files and it no longer shows on new projects.

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
-If Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.

This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine.

How do you get to the "Multiple Item Information" window so I can click "Part of a compilation:?

How do you get to the "Multiple Item Information" window so I can click "Part of a compilation"? When I transfer a CD to iTunes, and the CD has ten tracks, it loads as ten different albums. Also, once this happens, do I have to delete the album and start over or is there a way to merge the albums in iTunes? Using iTunes 10.04.08.

And you've made me remember that using the compilation flag may only work in iTunes if you go into the Songs view, then use View > Column Browser > Show Column Browser and then View > Column Browser > Group Compilations to make sure this line is ticked.
It is also best if View > Column Browser > Use Album Artists is also ticked.
tt2

Can't drag files from desktop to project files window

Im using the latest premiere pro version, 7.2, and while I can drag files from my desktop to the project window in premiere 6, for some reason its no longer possible in premiere 7.2
whenver I try to drag audio or video files from my desktop or any folder to the project files window at the bottom left I get a forbidden sign or circle with a diagonal so the only way to import files is through the import menu, which is less straightforward and slowlier
Ill be happy to provide more data if required
thanks
PS: obviously Ive already created a sequence so the problem is not that

The latest version is 7.2.2 (33)
Upgrade to that and see if it helps.

Opening Mac project in Windows machine

I just learned today that moving AE projects between Windows and OSX is NOT supported.
Is this something new in CS6...?
Thanks

This is the error I'm getting everytime I try:
"not enough memory to initialize PSL"
Any ideas...?

Where is the "Profile" section in Project Property window?

Hi, first time use this Oracle JDeveloper. From the tutorial it seems that inside the Project Property window, the left pane, you have the "Common" section and "Profile" section. Inside "Profile" section it's the "Development", then under Development you have "Paths" "CodeCoach" "Compiler", etc.
My problem is, in that left pane, I only see a "Common" section, I don't even have something called "Profile". This makes it impossible for me to set the class path, because according to the tutorial, I need to change something under "Development" which is under the "Profile".
Any advice welcomed! Thanks!

Hello all,
I'm trying to use ADF Faces. According to the document, http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/faq.html, section 3.5:
"You need to enable J2SE 1.4 Assertions. In jdev this can be done in project properties (Select Tools -> Project Properties -> Profiles -> Development -> Compiler -> Enable J2SE 1.4 Assertions.)"
I'm using JDeveloper 10.1.3.34.12 on Mac OS X, java version 1.5.0_02-56. How do I enable J2SE1.4 Assertions?
Thanks,
-Anthony

Missing user-defined fields (project definition) in project inform. system

Dear PS friends,
I have extended the CI_PROJ structure with some user-defined fields.
I have started report RCNCT001 (to analyze these new fields in the project information system). The include RCNPROJR was generated and contains the new fields (table XXL_DATA). Include RCNSOM00 was generated too. This is described in note 43493.
But Iu2019m still missing the new user-defined fields in the dynamic selection of reports (e.g. CN40).
What else I have to do? We use SAP_APPL : SAPKH60009
Thanks in advance for any suggestions!

have you used user defined field or custom field via exit CNEX......
User defined fields are activated by configuration using field key
If you added custom fields then check out OSS note 188663 on how to create a CUS view for dynamic selection.

Can't highlight and copy text from the Podcast Information window

With previous versions of iTunes I was able to convert Podcasts to AIFF files in my music library and then copy the track notes and text from the information window pane in Podcasts. With iTunes 8, I can get the information windows to pop-up but the text is not highlightable. Any ideas how I can cut and paste the info? thanks.

I think I finally figured out the copy paste podcast thing and I do not know why I did not think of this earlier.
Instead of clicking on the "i" symbol to get the information about the podcast to come up in the window that you cannot copy and paste from, hit command i or File> Get Info. The window that opens is just like the one that opens when you get info from a track in your regular music library. You can copy and paste from this one, even if it is a Podcast.
paul

Desktop Project Warnings window not the best help tool

The Desktop Project Warnings window is saying that I need to provide an audio clip but not showing where. Is there a better way to see what's needed?
So is there a log file window or something like that where I can trace the problem?
Thanks,
Claes

In looking over the help, you are correct that the description of ad types fails to specify that Desktop means iTunes Radio. The inverse, however, is well-documented:
Create an ad for iTunes Radio on the desktop
I would strongly recommend you click the "Send feedback" link on the help page to let Apple know that the help text should be clarified.
Regarding the learning curve, have you watched the iAd Producer presentations from WWDC 2013? They were very helpful to me:
http://devstreaming.apple.com/videos/wwdc/2013/609xfx3xpwcil5bz8h6ot4f871/609/60 9-HD.mov?dl=1
http://devstreaming.apple.com/videos/wwdc/2013/611xfx3x2l2zzkb2oaovson/611/611-H D.mov?dl=1

Hide row in information windows FOI

Hy,
i have a problem.
An information of my dynamic jdbc_query is useful for calculating advanced style to use, but i don't want to display this value on the information window when i click on the drew area.
How can i solve my problem ?
Thank you in advanced.
Best Regards.

Hi,
I'm a bit confused with your description, If you encounter any problem with Windows 7 using experience, it would be better to provide an example or Screenshoot for your problem.
Thanks for your understanding!
Roger Lu
TechNet Community Support

Project Information Window?

Similar Messages

Maybe you are looking for