Project information window always show

Greetings,
I published a Captivate project (a simple recording) as a
Flash movie and it is used in an Authorware project. When the movie
plays in the Authorware file, the Project Information Windows shows
from the beginning and it never goes away, even when I click its
close button.
A similar question was asked in this forum in July 2007, but
it was not answered.
Any tip will be much appreciated!
Thank you,
Laurence

Additional Info to save time...
In LPX using the default US Key Command Set.... you must assign a key to that Key Command to see the Project Info screen....
LPX Menu Item..... Logic Pro X / Key Commands / Edit....
Next... in the key Command edit window that will open.. search for Project Information...
...and then assign a key..
I use the "Learn by Key label" method and then just press the key combo I wish to assign.
The assignment I choose is SHIFT + OPT + CTRL + P but you can assign whatever you like so long as it's not already used....
In LP9 (Or the LP9 Key Command set if used in LPX) the default Key Command is CTRL + D
Note: In LPX default US Key Command Set... CTRL + D is used for another key command.

Similar Messages

Captivate Project Information window on Flash player

I published a Captivate Project as an executable file for
Macintosh. When I click on the SWF file, it opens up in the Flash
player, and not in my browser. Also, the Project Information window
does not go away, even when I click on the close button. Some of
the buttons on the navigation bar don't work either, like Exit and
Forward. Has anyone come across this problem?

The purpose of beta software is to find potential problems. You have just found one, and you should report it back to the beta team.
If you think it is a Flash Player bug, report it at https://bugs.adobe.com/flashplayer/
If Flash Player works fine on the release version of Firefox, then I suggest that you reinstall that version.

Project Information Window?

How do I open the Project Information window in order to reorganize the memory? Where is the key command to open the project window?

Additional Info to save time...
In LPX using the default US Key Command Set.... you must assign a key to that Key Command to see the Project Info screen....
LPX Menu Item..... Logic Pro X / Key Commands / Edit....
Next... in the key Command edit window that will open.. search for Project Information...
...and then assign a key..
I use the "Learn by Key label" method and then just press the key combo I wish to assign.
The assignment I choose is SHIFT + OPT + CTRL + P but you can assign whatever you like so long as it's not already used....
In LP9 (Or the LP9 Key Command set if used in LPX) the default Key Command is CTRL + D
Note: In LPX default US Key Command Set... CTRL + D is used for another key command.

Windows always shows lock screen when idle, ignores setting

On Windows 8, I had my computer set up so that the screen would turn off after a period of inactivity. When I would move the mouse or press a key, it would resume without asking me to log in. After upgrading to Windows 8.1, it is now always showing me the
lock screen when resuming from idle. In the lock screen settings, I found a new option named "When my PC is inactive, show the locks screen instead of turning off the screen". I have disabled this setting, but my computer still locks every time the
screen turns off.
How can I get my computer to stop locking when it is idle?

Hi,
What about the settings in Screen Saver? Please check the Option "On resume, display logon screen" is unchecked.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cisco Jabber for Windows always shows "Away"

Cisco Jabber for Windows (9.0.1, CUPS 8.6.4, UCM 8.6.2, Exchange 2010) always shows status as "Away" for one user. Others seem to be working correctly showing "one the phone", "in a meeting", etc. Tried reinstalling client with no change. If you manually change to "Available", it changes right back to "Away". Anyone have an idea where to look (registry, logs, etc.)?

I am seeing the same problem. I haven't tried a different user to login on the same machine, but I did try closing my client on my primary machine (exited) and then logged in on a different computer with a fresh Jabber for Windows install.
I am running Jabber for Windows Version 9.0.2 Build 9453 on windows 7 64bit primarily, and Windows XP as the second test. Running CUPS 8.6.4 in HA over WAN cluster mode with CUCM 7.1.5 and Unity Connection 8.5.1 ES 16.
Phone presence information does still flow through when I pick up my phone hand set my status changes from Away to On a Call.
When I check the presence diagnostic test for my user, it also reports that I am away.

IChat window always showing I'm Offline.

My status is always showing Offine, even after I change it. My buddies can see my status change and contact me, but I'm unable to contact them because my iChat window always thinks I'm offline and won't show me my buddie list.
I have deleted all the iChat preferences....no luck. Not sure what else to try.

Ok,
When you Add a Buddy it is normal to enter in the First Name, Last Name details.
This adds them to the Address Book.
In Leopard and Snow Leopard iChat did not tell you that there was an Error if you tried to Add someone that was already in the Address Book (It just did not add them to the Buddy List, Offline or otherwise)
You don't seem to be add new people which makes me think you do not have Permissions to Write (Save) to the Address Book.
This may also be true of the /plist that holds the Status Settings
I would go to your Home Folder and highlight the Library Folder there.
Then use the File Menu > Get Info (Or the Keystrokes) to see the Info panel.
The Last section is on Permissions and Ownership
It should list your account name and Me in Brackets (me)
Then that entry should have Read and Write Access.
If that Folder is OK check the Preferences Folder inside that.
7:29 PM Sunday; July 24, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

SMC update always show up when starting the computer...

hi after the SMC update, every time when I restart my computer that SMC window always show up telling me that I'm at the 1.1 version. Is this normal? how do I turn it off? cause it is slowing down my computer when it's starting up.
thanks!

Although deleting it will probably solve the problem, I didn't have to when I ran the SMC update. It's still there and it doesn't pop up at every startup.
I just took a look at the script in the SMC firmware update installer that gets run after the install completes, and it looks like it just adds the updater application as a login item. Have you tried manually removing it from your login items?
Click on the Apple menu at the top left of the screen and choose System Preferences. Click on Accounts in the lower-left area of that window. Click on the Login Items "tab" at the top of the window and see if the firmware update is in the list. If it is, you can remove it by clicking on it and clicking the little minus sign button.
MacBook Pro 17" 2.16 GHz Mac OS X (10.4.7)

How do I reinstate the information bar that shows the prevention of opening a pop-up window?

After Firefox opened the information bar telling me they blocked a pop-up window I inadvertently clicked the option link and deleted the information bar from coming up again.
How do I reinstate the information bar that shows the prevention of opening a pop-up window?
== This happened ==
Just once or twice
== I clicked the option link and selected the "do not show this again" option

I set browser.popups.showPopupBlocker to false, and information bar still appears.
When I also set privacy.popups.showBrowserMessage to false, it doesn't appear.
To test, whether the information bar appears, I use
[http://www.popuptest.com/popuptest3.html]
So, set to true preferences
privacy.popups.showBrowserMessage
and
browser.popups.showPopupBlocker
Both of them!!!
Does it help you?

Project Centre - Active Issues and Active Risk columns always show 0

Hello,
We have created a number of Project Centre views to which we have added the "Active Risks" and "Active Issues" columns against projects. No matter how many active issues or risks a project has, these columns are always showing 0 for each
and every project.
The reminders web-part on the PWA home page, and the Issues and Risks page (/PWA/IssuesAndRisks.aspx) correctly show these counts for a user, but Project Centre does not show the values correctly for projects.
We have not changed the values in the "Status" column of either list - they're still the default "(1) Active", "(2) Postponed" and "(3) Closed".
All issues and risks are correctly promoted to the reporting database on publish or when a list item is added/updated/deleted etc.
Our environment was upgraded from Project Server 2010 to Project Server 2013 and we're running service pack 1.
If not now, when?

Hello,
There fields don't actually work, if you want to see the active risks or active issues per projects in a summary row, create a report from the Reporting schema in the Project Web App database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How to create a popup window that shows detail information when press submi

hi,all
how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
how to do achieve this ?help plz .
best regards
hlee
Edited by: hlee on 2011-4-15 上午1:26

hey,vee
thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
best regards
hlee

AppleScript Studio ignores breakpoins, and always shows "NO EDITOR"

I have started several AS Studio projects over the last couple of years, and never stick with it because I've never been able to get its built in debugger to work.
I have several breakpoints set, but when the debugger window opens, it is always empty, and the bottom pane always shows "NO EDITOR". AS Studio blows right by the breakpoints and displays the first window. I have gove over the preferences several times, and cannot find what might be set incorrectly ?
In the past I was able to use Script Debugger, but it's a hack because you can only debug the generic AS functions, and not the AS Studio specific routines, so it's a very weak solution.
I even stuck a -> DebugStr("Debugging...") just before the property declarations, all to no avail...
I would be grateful for any insights on how to get this thing working...
Best Regards,
Bill Hernandez
Plano, Texas

Bill,
Thank you for submitting this report. Apple values your time and input. While we cannot respond to every bug, please be assured that your report will be reviewed by the appropriate group.
Your tracking number for this issue is Bug ID# 4899929. You may check status on this report via the 'My Originated Problems' tab or by contacting [email protected] When contacting us by email, please be sure to reference your Bug ID number.
Please know that you may append additional information, including files, to your report through the 'My Originated Problem' section clicking the Bug ID number you wish to modify.
Apple Developer Connection

Remote Exchange Management Console "W3SVC isn't running on any Exhange servers in site" and always shows older version after SP2 or SP3 installed

I'm trying to use EMC on a computer to remotely manage Exchange 2010 without having to do from the actual Exchange servers.
First off, upgrading, uninstalling or installing EMC always fails on "Stopping" services. Seams to be a pretty common problem, but no clear fix other than deleting the registry entry (HKLM\SOFTWARE\Microsoft\ExchangeServer) and the
"C:\Program Files\Microsoft\Exchange Server" folder. I'm guessing this is a bug since there should not be any Exchange services that need to be stopped on a computer where I'm just trying to use the EMC tool to manage Exchange.
Next, is where when I open EMC I get "The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote PowerShell, this service must be running. Make sure that the W3SVC is running on
at least one Exchange server." From all the reading I am pretty sure that this is due to the Exchange servers being on one version and EMC I'm trying to use is another version.
This is the version our Exchange Servers are on:
ProductVersion   FileVersion      FileName
14.02.0375.000   14.02.0375.000   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
Which finally brings me to the part where no matter what SP I install to run EMC it always shows:
ProductVersion   FileVersion      FileName
14.01.0218.015   14.01.0218.015   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
I've tried SP2, and even SP3 hopeing that an even newer version would let me connect to Exchange, but no matter what it always shows the 14.01 version above.
I've also tried installing "Exchange2010-KB2874216-x64-en" which should be the same version we are on (Update Rollup 7 for Exchange Server 2010 Service Pack 2), but get a Windows Installer Error stating, "The upgrade patch cannot be installed
by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." This Error probably makes sense if no matter what I do I'm stuck with a version prior to SP2.
Any ideas?

Hi,
From your description, I would like to clarify the following things:
1. Make sure the World Wide Web Publishing Service is running in Exchange server.
2. Ensure that the account you use to open EMC is a member of Organization Management role group.
3. Based on my knowledge, the error "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." occurs if you install
the RU for a different SP. Please re-download the Service Pack 2 and install it on the remote computer since it hasn't been installed successfully from the above information.
What's more, here is a similar thread for your reference.
Unable to install Update Rollup 4 for Exchange Server 2010 Service Pack 2
https://social.technet.microsoft.com/Forums/exchange/en-US/677c21ed-e125-41c1-a468-c268e1f21f8e/unable-to-install-update-rollup-4-for-exchange-server-2010-service-pack-2?forum=exchange2010
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Trash can icon always shows as empty after upgrade to 10.6.2

I searched the archives and didn't see any information about this particular situation: my trash can icon always shows as empty even though the trash has items in it.
If I right click on the icon, "Empty Trash" is grayed out, but if I click on the icon I can open the trash can and choose "empty" at the top right of the window. It's not really a big deal, just weird.
Anyone else have this happen?
Kim

V.K., I hadn't had the chance to try creating a new user account yet, but I just noticed the trash showed it had trash and I right clicked the icon and the empty trash option is now available. I chose empty trash and it worked.
I don't what changed...but it seems to be OK now...
Thanks!
Kim

My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume.

My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume. I have tried everything and even did time machine in safe boot as told by an apple suppoprt advisor. still the same error after 16gb

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Cannot see Project Assets Window

When I open certain projects, the Project Assets Window is no longer showing when I click on the arrow that is supposed to open the window. I've re installed twice, run ccleaner, and deleted the prefs file 2 times. The window only opens on two project files and it no longer shows on new projects.

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
-If Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Project information window always show

Similar Messages

Maybe you are looking for