Project Server 2013 Upgrade

Hi everyone.
I'm having trouble upgrading my databases from project server 2010 to 2013.
I followed all steps, but when i get to the
Convertto-SPProjectDatabase
part, i always get this error:
ConvertTo-SPProjectDatabase : A parameter cannot be found that matches parameter name 'Lcid'.
At line:1 char:391
+ ... eDbname SynPDE -Lcid 1033
+                    ~~~~~
    + CategoryInfo          : InvalidArgument: (:) [ConvertTo-SPProjectDatabase], ParameterBindingException
    + FullyQualifiedErrorId : NamedParameterNotFound,Microsoft.Office.Project.Server.Cmdlet.PSCmdletConvertToProjectServiceDatabase
What am i doing wrong, it always complaints about the LCID parameter.
This is my script:
Convertto-SPProjectDatabase-WebApplicationhttp://mywebapp-Dbserver mysqlserver-ArchiveDbnamePWA_Archive_DF0B957B_A7F1_4EFC_BCFB_12E0B22DA329-DraftDbnamePWA_Draft_DF0B957B_A7F1_4EFC_BCFB_12E0B22DA329-PublishedDbnamePWA_Published_DF0B957B_A7F1_4EFC_BCFB_12E0B22DA329-ReportingDbnamePWA_Reporting_DF0B957B_A7F1_4EFC_BCFB_12E0B22DA329-ProjectServiceDbnameSynPDE-Lcid1033
Can someone help? is this a bug with the script?
Thank you.

Executing command without LCID parameter obtain an error in the upgrading of Reporting database. Looking for in Sharepoint Logs:
The upgrading Published Database is OK
"Finished upgrading ProjectDatabase Name=MIGRA_ProjectServer_Published. 466d2d71-332e-4930-bbf3-d65b7dd1b28a"
The upgrading Reporting Database is ERROR
"ERROR Action 15.0.10.0 of Microsoft.Office.Project.Server.Upgrade.ReportingDatabaseSequence failed. 466d2d71-332e-4930-bbf3-d65b7dd1b28a
ERROR Exception:The conversion from data typevarchar
to datetime produced a value out of range. 466d2d71-332e-4930-bbf3-d65b7dd1b28a
ERROR    en System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)     en System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj,
Boolean callerHasConnectionLock, Boolean asyncClose)     en System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj,
Boolean& dataReady)     en System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout)     en System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1
completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)     en System.Data.SqlClient.SqlCommand.ExecuteNonQuery()     en Microsoft.Office.Project.Server.Data.SqlSession.ExecuteNonQuery(SqlCommand
command)     en Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseUpgrader.ExecuteUpgraderSqlScript(String sql)     en Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade() 466d2d71-332e-4930-bbf3-d65b7dd1b28a"

Similar Messages

After installing Project Server 2013 (without updating SharePoint Server 2013 SP1))

I am facing the problem while opening project web app. I configured the SharePoint 2013 and project server 2013. Here is the detail what I performed the steps:
OS Server 2012 R2, SQL Server 2012, SharePoint server 2013 version
15.0.4420.1017, Project Server 2013 version
15.0.4454.1000. SharePoint configured and running successfully. After project web app site provisioning successfully completed. I got the below error.
Microsoft.Office.Project.PWA.WebParts.PWAPart' from assembly 'Microsoft.Office.Project.Server.PWA, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' cannot reduce access.
I run this psconfig -cmd upgrade -inplace b2b -wait -force. But still getting same error.
Previous steps:
Earlier I had also tried to install SharePoint Server 2013 SP1 "3823428". After the installation SP1 some of sharePoint site features suddenly stopped e.g: Cannot browse "Service Applications -->
Manage service applications" option even after re-start the server. This was previous error after upgrading SP1
"Method 'get_IsClientValid' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy' from assembly 'Microsoft.SharePoint.WorkflowServices,
Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' does not have an implementation"
Anyone can help me!!! Thanks...
Faisal Numan

hello,
For SP2013 and PS2013 to work properly on Windows Server 2012 R2 you need to use the SP1 install media for both, download SharePoint 2013 with SP1 and Project Server 2013 with SP1
http://support.microsoft.com/kb/2891274
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Saving Error in Project Server 2013, Need Help!

Hey All,
I am running into issues with a Projects saving from Project Pro 2013 to our Project Server 2013 Farm.
It is strange, when someone tries to save a project out of Project Pro 2013 to Project Server, it will run through the "Synchronizing Data to the Server", and then bombs out with error
Job Type: Save
Error ID:9000(0x2328)
The project could not be saved to the server, Etc..
My understanding is that this is a generic save error that could mean many things.
In the ULS logs under "Active Cache Save" , I am getting:
"Cancelling correlation 1339927b-e9e5-e311-941d-00155d2bc10d as save is an overwrite or resubmit"
What is strange at this point is if I check the project back in, and re-open/re-checkout the project, and try to save again, it is successful in saving.
Just a few details about the environment:
Project Server Version: 2013 RTM (In the process of upgrading)
SharePoint Version: 2013 RTM (In the process of upgrading)
Project Structure: One Master Project with all other projects being subprojects of the master
Published Status: All Published
SQL Version: SQL Server 2012 SP1
User Count: About 5 currently
Deployment: 1 WFE, 1 APP Server, 1 SQL Server
It is just odd, as it seems to be completely random. We have tried clearing caches out to see if that resolves it but it did not. It is just odd that it takes two saves for it to actually work correctly, and is problematic as the many times they are saving
from the master and it bombs out there.
I am not sure how it could be an issue as it is usually just a single user working on the individual subprojects.
Maybe it is an issue in the RTM? I couldn't find any info in any of the CU's or SP's that addresses this directly
Has anyone seen this, or have any suggestions?
MS Support has not been any help at all.
Thanks all

I have heard of issues with Master and Sub-Projects and both being published to Project Server, as a rule it is a feature I learnt to avoid as a result of bad experiences with earlier versions of Project Server.
Whilst this will not resolve the issue you have encountered the following suggestion may help you avoid pain in the future and leverages the potential of Project Server to represent common attributes for projects.
Typically a Master/Sub Project environment is intended to reflect projects that are commonly aligned - it is not unusual for a Master Project to represent a programme and for there to be multiple sub-projects forming the programme - there can be programme
level events that have multiple predecessors from multiple sub-projects.
Rather than create a master and sub-project situation I would suggest looking to define two Enterprise Custom Project fields to assist with such situations. The first being a Project Field called Programme that has a look up table with a list of current
programmes you can select from. The second Project Field would be a Programme Status Field with an associated lookup table with 3 values, Master, Sub-Project, Standalone.
You can have a project represent the Master (Programme) project and open it and all sub-projects in the programme (albeit this would have to be a one by one action to begin with). With all the projects open go and open a New Window in Project Professional
and elect to include all the open projects in the new window - this will create a new project with all the selected projects showing as
"embedded objects" and then create dependencies from sub-projects to programme level events in the Master Project (I would suggest what I call
"one way traffic" when creating "cross project dependencies" to avoid further headaches). Close the project, you will be prompted to save changes which you should do but do not save the new window
"container" project. The dependencies across the projects will persist - in each project you will be able to see external successors - tasks in the master project. In the master project you will be able to see external predecessors.
In PWA you can create Project Centre Programme views that filter to exclude projects that ARE Standalone and group them by Programme and sort by Programme Status Field - this will ensure that the "Master" sits at the top of the pile for each programme grouping.
Just a suggestion - I hope the issue you have encountered is resolved soon.
Dominic Moss | MAPM Microsoft Certified Technology Specialist | Our Newsletter:
PM News Project Server Specialists
Project Server PRIME | Twitter:
@Twitter | Facebook:
@Facebook | Linkedin:
Wellingtone

Project Server 2013 - Reporting ( Project publish ) Queue Job Error - 24006

I am trying to publish a project and getting below error
please provide me a solution your help greatly appreciated
Reporting ( Project publish ) Queue Job Error - 24006
General
Reporting message processor failed:
ReportingProjectChangeMessageFailed (24006) - Object reference not set to an instance of an object.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='5a10ad83-4736-e311-941a-00155d0c1708' QueueMessageBody='Project
UID='eaf690a4-5fda-e211-af15-b8ac6f50f278'. PublishType='ProjectPublish'' Error='Object reference not set to an instance of an object.'.
ReportingProjectChangeMessageFailed (24006) - Object reference not set to an instance of an object.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='e412ad83-4736-e311-941a-00155d0c1708' QueueMessageBody='Project
UID='eaf690a4-5fda-e211-af15-b8ac6f50f278'. PublishType='ProjectPublish'' Error='Object reference not set to an instance of an object.'.
ReportingProjectChangeMessageFailed (24006) - Object reference not set to an instance of an object.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='6e15ad83-4736-e311-941a-00155d0c1708' QueueMessageBody='Project
UID='eaf690a4-5fda-e211-af15-b8ac6f50f278'. PublishType='ProjectPublish'' Error='Object reference not set to an instance of an object.'.

If your farm is not updated please update it from OCT CU for 2013 project server.
Please update it as cumulative update is having hotfix for this issue.
http://www.intersoft.no/blogg/item/33-april-2013s-cumulative-update-for-project-server-2013
http://www.datazx.cn/Fv7p5a/xw-US/dc6mbbt6-btss-fxi4-s8c4-8jsribt69m8x/nnn.projectserverexpertrs
As per the 2nd link Oct Cu for 2013 is fix this issue hence i would suggest you to upgrade from OCT CU.
kirtesh

Excel 2010 reporting with Project Server 2013

Our company purchased SharePoint Server 2013 and Project Server 2013, mainly for the reporting/BI attributes. I read that the report templates, etc. that can be used by Project Server web app can only be accessed with Excel 2013?? Does that mean that our
group/customers have to upgrade to Excel 2013 to take advantage of the Excel Services? This is a huge deal. Can you please let me know as soon as possible? Yikes!! :-O

Hi,
As far as I know, Excel 2010 is still supported by Project Server 2013.
See here:
https://technet.microsoft.com/en-us/library/ee683978.aspx
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Project Server 2013: customize JSGrid (Project Center, MyTasks, etc...) ?

Hi,
In Project Server 2010, it was possible to customize the JSGrid, thanks to the tutorial included in the SDK "Walkthrough:
Customizing the PWA Ribbon and Accessing the JS Grid". It works really fine, and I used this possibility in many Project Server 2010 implementation for Customer.
I would like to make it on Project Server 2013, but the same code doesn't work. I found some posts
here, where people had the same issue, but no clear answer.
The Project Server 2013 SDK does not contain the same tuto upgraded for 2013, and I hope that this possibility still exists.
If somebody has a very basic example to show how to execute some custom code on Focus Change event, or clic, or what ever event happening on this JSGrid, it would be very nice to share.
My installation is On Premise, not in On Line.
Thank you for your help !
Sylvain

Hi,
In fact for filtering, you have to use delegate.
The "HandleFilter" function must be created by you. You have to bind this function to the correct delegate.
For filtering, the main delegates are:
SP.JsGrid.DelegateType.AutoFilter
SP.JsGrid.DelegateType.LaunchFilterDialog
SP.JsGrid.DelegateType.GetAutoFilterEntries
The post
here explains the process for 2010. For Project Server 2013, the difference is that we don't have the same objects.
Here you can find the way to declare the delegate in Project Server 2013, with the SetDelegate method:
var pc; // Contains the Project Center extension object.
var JsGridControlInstance;
var JsGridSatellite;
_spBodyOnLoadFunctionNames.push("ProjectCenterMain");
function ProjectCenterMain() {
pc = new ProjectCenterExtension();
function ProjectCenterExtension() {
if (typeof projectCenterComponent === 'undefined')
return;
JsGridSatellite = projectCenterComponent.get_GridSatellite();
JsGridControlInstance = projectCenterComponent.get_GridSatellite().GetJsGridControlInstance();
JsGridSatellite.get_tableViewParameters().bAutoFilterableColumns = true;
JsGridControlInstance.SetDelegate(SP.JsGrid.DelegateType.AutoFilter, HandleFilter);
JsGridControlInstance.SetDelegate(SP.JsGrid.DelegateType.LaunchFilterDialog, FilterDialog);
JsGridControlInstance.SetDelegate(SP.JsGrid.DelegateType.GetAutoFilterEntries, FilterMenu);
function HandleFilter(newState) {
alert("Filter !");
function FilterDialog(param) {
alert("FilterDialog !");
function FilterMenu(param) {
alert("FilterMenu !");
My advice to search, is to put a break point on the ProjectCenterExtension function, and through debugger, tou can drill down in the main methods and properties.
Often you will see functions with get_XYZ(), and then be able to make the matching with the Project Server 2010 syntax.
For the filtering implementation, I beleive that you can deal with your article based on 2010: it should work as soon as you will get the equivalent objects in 2013.
Hope it helps !
Sylvain

Project Server 2013: Set-SPProjectPermissionMode error

Hi,
In our environment, we need to use Project Server permission mode to fine tune permissions. According to documents, we need to run the Set-SPProjectPermissionMode command. However, when I ran it, I got the following error:
Set-SPProjectPermissionMode : There is a version mismatch between the Web server and the content databases, and connections to the data have been blocked to avoid data loss. This can happen when a service pack is not completely installed. Notify your server
administrators so that they can
upgrade the Web server and the databases to the same version. For more information about installing service packs and updates, see the Microsoft Web site (http://go.microsoft.com/fwlink?LinkID=177163).
The linked document does not offer any help. It talks about changes in Project Server 2010, while we're configuring permission mode in Project Server 2013.
Thanks for any information.
By the way, we've installed both SharePoint 2013 SP1 and Project Server 2013 SP1 (currently only one server in the farm). In Central Admin's Upgrade and Migration section, neither the content database nor the service packs (or any other updates) report any
errors.

Hello,
If you go to Central Admin check the following two pages:
Manage Servers in this Farm (in System Settings) - on this page what does the status show for each server in the farm, "Action Required" or "No Action Required". If any action is required, please resolve this before attempting
this PowerShell command again.
Review Database Status (in Upgrade and Migration) - do any of the farm databases status display action required or are they all "No Action Required"? If any of them require action, please resolve this before attempting this PowerShell command
again.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

After Project Server 2013 SP1 update (without updating Sharepoint Server 2013)

I get this error entering the PWA root:
Derived method
'RequiresWebPartClientScript' in type
'Microsoft.Office.Project.PWA.WebParts.PWAPart' from assembly
'Microsoft.Office.Project.Server.PWA, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' cannot reduce access
SharePoint Server 2013 version: 15.0.4420.1017
Project Server 2013 version: 15.0.4569.1506
There is no SP1 uninstall process? Totally lost!

Hi Ximet,
If you go to Central Administration > System Settings > Manage Servers in this Farm. Do you see Upgrade Available for the servers.
If they show Upgrade Available, can you run the SharePoint Config Wizard one more time or you can also try running the command "psconfig -cmd upgrade -inplace b2b -wait -force"
Just curious to know if the issue is because the binaries have not been updated properly.
In case the issue persists and is impacting your business, I would suggest that you raise a support ticket with Microsoft so that we can further assist you on the case.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management
Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading the thread.

Problem after installation Project Server 2013 CU September 9, 2014

Dear All,
I have some problems after installation
Project Server 2013 CU September 9, 2014 (Hotfix 2883072) on 3 level farm
Before installing CU, I have installed
SP1 for Project Server 2013, installation and configuration was successful.
Then I have installed CU and I have not get any errors during installation process. Then I have restarted servers and in SharePoint health analyzer got an error about patch/installation status
on WFE server.
I checked in Windows installed updates and hotfix is installed. I checked in SharePoint Update and Upgrade history and there were no errors during installation. But when I checked in Manage
Patch Status list I found an information:
Language Pack for SharePoint and Project Server 2013 - Russian
Microsoft Project Server Russian Language Pack 15.0.4420.1017 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Microsoft Project Server 2013
Microsoft Project Server English Language Pack 15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
Microsoft Project Server Web Front End Server
15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
If I run installation again I get message that nothing will be updated - no update needed.
Please help, how I can install missed packages?

The problem was solved !
I solve it using two ways:
1. I have installed the hotfix for Project Server - Hotfix for Project Server 2013 October 14, 2014 KB 2889959 (Projectserverwfe-x-none.msp, Projectservermui-Language-Code.msp)
2. using command
Psconfig -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures -cmd installcheck -noinstallcheck
After two actions I was able to run SharePoint Configuration Wizard and upgrade database. Configuration completed successful.

Project Plan/Schedule for Project Pro and Project Server 2013 Install

Looking for a project plan/schedule for a dept. wide install of Project Pro and Project Server 2013. Anyone have one to share?

In Project Professional 2013 there are two templates:
Install Project Server 2013 and Upgrade to Project Server 2013. You may search for either template.
Here is a direct link:
http://office.microsoft.com/en-us/templates/results.aspx?qu=project&av=zpj150&queryid=312801ca-a859-48dd-af56-714e81c97cf4#ai:TC103345703|

Error while creating a Timesheet - Project Server 2013

Hi everyone,
One of user of PWA encounters an issue when he tries to create a timesheet. This error only occurs with a timesheet of
a specific period, he can create all the other timesheet.
So, when he creates the timesheet, this error occurs : "The timesheet creation failed, because of problems with Project Web App or with data validations"
After reloaded the list of the timesheets, a link to go to the specific timesheet
is available but if we click on it, we have this error :
"View Failue - The view failed to load"
I think , this error occurs
because the timesheet is not realy existing even if we have a link to it.
In the log (full log at the end), I've got this error :
Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values.
I've found this link with the same kind of problem :
http://social.technet.microsoft.com/Forums/projectserver/en-US/b0a92afc-11fc-40ef-9a44-357d953b31f6/unable-to-open-or-create-timesheets-these-columns-dont-currently-have-unique-values?forum=projectserver2010general but I've checked and published all the
user project but still have the error.
Have you got any idea where are these columns ? How can I found them without checked every project of PWA ?
Thanks,
Patmol
Full logs, for information :
[bucketHash:E3B9DED0] Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) StackTrace: at Microsoft.Office.Project.Server.Native.dll: (sig=6ea170d1-988e-4153-9f1d-0305c0ea0309|2|microsoft.office.project.server.native.pdb, offset=3C1E) at Microsoft.Office.Project.Server.Native.dll: (offset=1255D)
Watson bucket parameters: Microsoft Project Server 2013, ULSException14, 070f6ea0 "project server", 0f0011db "15.0.4571.0", ea364808 "system.data", 0400766f "4.0.30319.0", 52310bef "thu sep 12 02:33:51 2013", 00000e02 "00000e02", 00000020 "00000020", 44395864 "argumentexception", 00101621 "aeby7"
Error is: GeneralUnhandledException. Details: General Unhandled Exception in _TimeSheet.CreateTimesheet_ Attributes: System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: i:0#.w|wavenet\cev Correlation Id: 9709e41b-9a18-e411-941e-00155d029b05 PWA Site URL: http://intranet.wavenet.lan/PWA SA Name: Project Server Application PSError: GeneralUnhandledException (42), LogLeve...

Hi Patmol,
Have you tried to go to the previous or next timesheet and then navigate with the "previous period" or "next period" to the timesheet in question.
Also have you tried to open it using a delegation session?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Issue while installing Ms Project Server 2013 on MS Server 2012 R2 with Sharepoint Server 2013

Hello MS Support Team,
I installed SQL server 2012 & Sharepoint server 2013 and after that the MS project Server 2013 is not installing on the same server -- pls hv a look the enclosed screenshot. sent at [email protected] and guide me to resolve it on priority.
A windows poped up - Installation Error - This Project requires MS Sharepont Enterprise edition... (Which is not available on the MSDN Server)..only standard edition available.
Please reply asap @ [email protected] - Call @ 0120471384
Kind Regards,
Vinay Bhardwaj
Network System Administrator - GREC (IN)
Rockwell Automation | A-66, Sector 64 | Noida | India
LISTEN. THINK. SOLVE
IP : 71384 | E : [email protected] | W : www.rockwellautomation.com

Hi Siriosus,
Indeed you do need Sharepoint Server 2013
Enterprise for Project Server 2013.
See article below where it is mentionned:
Project Server 2013 requires the Enterprise edition of SharePoint Server 2013. Prior versions of SharePoint Server and SharePoint Foundation 2013 are not supported.
http://technet.microsoft.com/en-us/library/ee662114(v=office.15).aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Project Server 2013 on Windows Server 2012 R2

Can we install Project Server 2013 on Windows Server 2012 R2? Is it supported? I searched a bit but couldn't find any concrete information if it is supported or not.

From the article:
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
Today, aligned with the SharePoint Conference, we’re announcing availability
of a slipstreamed SharePoint Server 2013 with SP1. SharePoint administrators
will be able to use this updated installer to deploy on Windows Server 2012 R2.
which I got linked from the following
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx

Task custom field and formula custom field don't correspond Project Server 2013

Hi people, I have an interesting case in Project Server 2013 SP1 CU Apr:
I have a custom task number field called AM. This field get's filled by a PSI action with actual material costs from an external system.
I also have a custom task cost formula field that is called AM*. This field is a formula field that has the formula [AM]. And summary tasks use the formula field as well.
As soon as I create a project, assign costs in the external system and let PSI fill the values within AM I get correct values in AM. But nothing is calculated on AM*. If I edit the project in the browser and publish, check in and revisit the project
AM* still isn't filled.
If I open the project in MS Project Pro the calculation comes through nicely, however I do not want to use MS project Pro to see correct data in browser.
Some tests I have already done:
I have noticed that when I create a new calculated task field AM2*, this get's calculated correctly on the already existing task.
I have also noticed that opening the custom field in server settings and just saving the field creates correct values on AM*.
What is going on? I don't want to save the custom formula field every day... There are 11 custom formula fields in the environment at the moment.

Hi Gary,
Thank you for the quick response. Please note that the fieldnames are [AM] and [AM*]. There is a difference in field name due to the astrix. However I did think about the situation and changing one of the field names all together didn't do anything for the
situation at hand.
It looks like some kind of refresh thing, because without changing anything in the custom field just saving the field in server settings will turn op good values. However, values already turned up good in Project Professional 2013. And that suggest
that there is a calculation error on the PWA side wouldn't you say?
Anyway, thank you for taking time to look into this matter.
Erik

Project Server 2013 - This webpart was unable to load

Hi all,
I am getting the following error in project server 2013 project sites:
This webpart was unable to load. For more information, please contact your server administrator.
<Guid>
I only get this error message on 'Project Summary Web Part'.
Any idea what it could be?
Thank you,
SJ

Hi there!
I got similar problem in a PDP that was working perfectly even after migration to 2013. On this case, my PDP was showing the webpart that let you to choose what fields and custom fields want to show on a specific PDP.
I created a copy of the crashed PDP and got the same error. So I bet for remove all the custom fields and add one by one to see what happens. The surprise came up when it started to work when my PDP had just pair of custom fields. With this procedure,
I found that the problem was on some specific custom fields created that had null values to all the projects created before. Once I forced value on those fields it worked properly!!
Sometimes EPM2013 has a very strange behavioural and in some cases just clicking on EDIT and SAVE without any change have solved some of my problems too.
I hope it helps this to you and feel free to contact me if I can somehow help you :)
Diego

Project Server 2013 Upgrade

Similar Messages

Maybe you are looking for