Issue while installing Ms Project Server 2013 on MS Server 2012 R2 with Sharepoint Server 2013

Hello MS Support Team,
I installed SQL server 2012 & Sharepoint server 2013 and after that the MS project Server 2013 is not installing on the same server -- pls hv a look the enclosed screenshot. sent at [email protected] and guide me to resolve it on priority.
A windows poped up - Installation Error - This Project requires MS Sharepont Enterprise edition... (Which is not available on the MSDN Server)..only standard edition available.
Please reply asap @ [email protected] - Call @ 0120471384
Kind Regards,
Vinay Bhardwaj
Network System Administrator - GREC (IN)
Rockwell Automation | A-66, Sector 64 | Noida | India
LISTEN. THINK. SOLVE
IP : 71384 | E : [email protected] | W : www.rockwellautomation.com

Hi Siriosus,
Indeed you do need Sharepoint Server 2013
Enterprise for Project Server 2013.
See article below where it is mentionned:
Project Server 2013 requires the Enterprise edition of SharePoint Server 2013. Prior versions of SharePoint Server and SharePoint Foundation 2013 are not supported.
http://technet.microsoft.com/en-us/library/ee662114(v=office.15).aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

Disappearing disk space Windows Server 2012 R2 with SharePoint Server 2013 Enterprise

I've got an interesting problem with a virtual machine in our VMWare environment. It is Windows Server 2012 R2 with SharePoint Server 2013 Enterprise installed. I started out with a 60GB disk and it started running out of space, so I increased
it in VMWare and extended the partition to 100GB. Well, that lasted for a bit and so I extended it again. I've done this 3 or 4 times and now I've got a 160GB disk with about 2-3GB of space remaining (and it started with 10GB remaining).
WinDirStat shows 105GB of <Unknown> space being used, which is probably my issue. However, I can't determine what this is and it keeps growing like a tapeworm. The context menu on the <Unknown> files has all the options disabled,
so WinDirStat doesn't appear to have access to whatever the file(s) is/are. I've performed several chkdsk /f on the C: drive and nothing bad is reported. I don't have any restore points and am not running VSS (that I'm aware of). The pagefile
reports as being about 4.9GB, so that's not the issue. No large files are shown anywhere and my explorer settings are set to show me all files, including system files.
When I try to run WinDirStat with elevated permissions, it hangs and becomes unresponsive.
I've even resorted to running CCleaner to see if it found anything, but it simply found the standard temp files and such...about 1GB.
I'm pulling my hair out...and I don't have much to start with. Anyone have any ideas?
Thanks
Russ

It appears that somehow, Microsoft Fusion Assembly binding logging was turned on and many of the temp folders located at c:\users\username\AppData\Local\Microsoft\Windows\InetCache\IE were filling up with hundreds of thousands of Fusion HTM log files.
This is controlled by an entry in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion\ForceLog which was set to 1. Hopefully, setting it back to zero will fix the issue. As a result of figuring this out, I have recovered almost 80GB of disk
space occupied by the log files.
I thought WinDirStat would show me what I needed to know, but it turns out TreeSize (which I've used in the past) works much better.
Russ

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

Issues while installing powershell V3.0

Hello Folks,
I am facing issues while installing powershell V3.0 on Windows 7 ultimate x64 machine.
It is throwing error as "The update is not applicable to your
computer." when I double click Windows6.1-KB2506143-x64 file.
Have checked that it have powershell V2.0 builtin in windows 7 and working as expected.
Have installed .NET framework 4.0 Full, then reinstalled
again rebooted machine.
Have tried with .NET framework 4.5 Full, still issue persists.
tried below workaround suggested on a forum:
start /w %SystemRoot%\system32\pkgmgr.exe /ip /m:Windows6.1-
KB2506143-x64.cab through CMD
IT returns error as:
Operation failed with 0x80070003
The system cant find the path specified
I am not able to figure out what exactly is going wrong.
Could someone please jump in to help ?
Thanks

Hi RajendraP,
Please also make sure Windows 7 Service Pack 1 (SP1) must be installed as a prerequisite on computers running Windows 7. To install SP1, go to
http://windows.microsoft.com/installwindows7sp1
Windows Management Framework 3.0 requires Microsoft .NET Framework 4.0. You can install Microsoft .NET Framework 4.0 at
http://go.microsoft.com/fwlink/?LinkID=212547
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Pacman Download DB issues while installing

Hey,
So I'm new to any type of Linux, but I thought I'd try arch out since many people recommend end it to me.
I'm in the install shell from the livecd and whenever I try to pacman -Sy to get the databases, they download full speed for a second then the DL speed just keeps dropping until the download cancels saying that it was too slow (less than 1b per 10secs). I've seen people post similar problems on here but none of their solutions worked for me.
Any help would be obliged,
-Cynthia
(I'm on my phone typing this BTW)
Last edited by Cynthia (2014-01-16 04:46:34)

for clarity :
Are you doing that while booting from the livecd, or booting from the minimal base system installed on your harddrive ?
If from the hdd : Which guide did you follow for installing and were there network problems during the install ?
Edit :
just realised your topic title says issues while installing.
Are you following https://wiki.archlinux.org/index.php/Beginners%27_Guide or another guide ?
Last edited by Lone_Wolf (2014-01-16 10:42:16)

Using Office Web Apps Server with SharePoint Foundation 2013

I want to know whether I can configure Office Web Apps server to edit Excel documents on a SharePoint Foundation 2013 site.
I came across a TechNet article that states that "When used together with SharePoint Server 2013, Office Web Apps Server provides updated versions of Word Web App, Excel Web App, PowerPoint Web App, and OneNote Web App".
However, later in the same article, it states "If your organization licenses Office 2013 through a Volume Licensing program, you can enable Office Web Apps editing for SharePoint 2013 on-premises" (without mentioning Foundation or Server).

Hi Lemesnil,
The Office Web App server should support the Edit licenses for SharePoin Foundation 2013, Office Web App is free to
download, you can also try installing and configuring in a test environment, see more from the below article applied to SharePoint Foundation 2013.
http://support.microsoft.com/kb/2886404/en-us
http://blogs.technet.com/b/speschka/archive/2012/12/31/enabling-licensing-and-editing-for-office-web-apps-in-sharepoint-2013.aspx
Anohter useful article aobut how to license Office Web App server, you can take a look.
http://blogs.technet.com/b/volume-licensing/archive/2013/05/22/how-to-license-office-web-apps-server.aspx
Thanks
Daniel Yang
TechNet Community Support

AD RMS 2012 integration with exchange server 2013

AD RMS 2012 integration with exchange server 2013
I would like to have a knowledge About this Topic
1.what is differrent if we use internal SSL certificate with Public Certificate and in this case i would like to use Mobile Phone I eed to import Root Certificate ?
2.Do I have problem? If I start to install AD RMS 2012 with SQL EXpress after that I want to chage it to SQL Server ?
3.when I use SQL Expres what I can do after Disk is full (10 GB)?
4.If AD RMS is down It will affect with email that it is already sent ?
5. Which Edition of outlook can produce IRM protected documents
6. To Use AD RMS Server 2012 through OWA, Outlook and Moblie Phone ,a CAL is required or not ?

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

Display an XML file Content as a treeView in a SharePoint 2013 custom form edited with SharePoint Designer 2013

Hello everyone,
Within a list form, user has to select a value amongst a huge number of availables options.
Instead of using something like a dropdown list, which would be very boring to parse, I would like to display possibles values in a treeview.
To do that, I tried to use an <Sharepoint:SPTreeView bind to a SharePoint:SPXmlDataSource who read data from an XML File.
<SharePoint:SPXmlDataSource runat="server" DataFile="../../SiteAssets/App_Data/myfile.xml" AutoSave="True" XPath="" ID="myDataXml"></SharePoint:SPXmlDataSource>
<SharePoint:SPTreeView runat="server" ID="MyTreeView" DataSourceID="myDataXml" />
But when I try to display the form in my web browser, an error occurs.
Therefore, my question is : Is it possible to display the content of an Xml file as a treeView in a SharePoint 2013 custom form edited with SharePoint Designer 2013 ?
If the answer is yes, how ? Which are the required properties for "SharePoint:SPXmlDataSource" tag and "SharePoint:SPTreeView" tag ?
What are the requirements to use thoses tags ?
Regards,
Florian.
Ps : I dont have access to the server side of the SharePoint site I am working on.

Assuming that https://fullsitename is a new URL address did you make sure to update your browser to include it in the Trusted Sites zone? The message you are quoting is exactly the one you get if you don't have it in Trusted Sites.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

SSRS 2012 integrated with Sharepoint 2013, subscription and impersonation

Hello,
We are configuring SSRS 2012 integrated with Sharepoint 2013. The reports are connecting to SSAS cubes via shared Datasources. We have defined user based roles and security in the cubes and would like to pass the effective username to the cubes when they
access data via reports.
Also we need to create subscriptions on these reports to run on either daily/weekly or monthly schedule and send email to a list of users.
How do we configure our Datasources on sharepoint so both could be acheived.
Our Database and Sharepoint are on different servers.
Thanks
Deepak

Hi Deepak
For your first question:
while configuring the datasource in SharePoint, check the option 'Set execution context to this account' in the settings. This will pass the effective user name to the cubes.
Thanks
Bala

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
        test.Reset();
        test.ProcessingMode =
ProcessingMode.Remote;
        test.KeepSessionAlive =
true;
        test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
        test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
            test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

Need to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.

Hi All
I have one sharepoint list with huge data i.e with 20columns and more than 200 records with the fields .
Suppose lets consider there are A,B,C,D,E,F,G,H columns.
Now i want to create one form with the fields A,C,E.
When the user enter the existing data of list for columns A,C..based on C value the E column value should change and update that particular item in the list.
Please guide me without visual web part can we acheive this by Sharepoint designer 2013 or what would be the preferable solution.
Please help me on this as it is very urgent from me..
Thanks in Advance
Sowjanya G

Hi,
According to your post, my understanding is that you wanted to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.
I recommend to create workflow associated to the list and then start the workflow automatically when an item is changed.
In the workflow, you can add condition and actions as below:
If current item: C equal to Test1
Set E to Test2
Then the value of the filed E will be changed based on the value of the filed C.
In addition, if you create the form using InfoPath, you can add rule to the filed C as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Everytime I try and sign into my iCloud account it tells me I can't log in due to a server error, but there is nothing wrong with my server . It also wont allow me to view any of my Photos or Documents that i have backed up.

Everytime I try and sign into my iCloud account it tells me I can't log in due to a server error, but there is nothing wrong with my server . It also wont allow me to view any of my Photos or Documents that I have backed up. Please help

Hi,
Are you running any Anti-virus software or do you have your firewall turned on? If so, disable them and try again. If that doesn't work, delete the iCloud account and then sign it back on again.
Make sure you are running the most current version of the iCloud Control Panel:
http://support.apple.com/kb/dl1455
Cheers,
GB

Error while installing MS Project Server 2013(trial) on Sharepoint 2013(CAL)

My problem is that I get the following error:
trial editions and licensed editions of SharePoint, Project Server, and Office Web Apps products may not be installed on the same server
when I try to install MS Project Server 2013(180 days-evaluation) over a Sharepoint 2013(MAPS license).
What does exactly this error say?
Do I need to have Sharepoint and MS Project Server with same type of license?
If so, I suppose I'll have to remove Sharepoint(MAPS) and install a 180 days-evaluation Sharepoint. Will this re-installation be acceptable or I'll get some license type incompatibility issues?

Hello. You are correct, you will need to have the same license types either both trials or both licensed. Uninstalling/ reinstalling with trials should work fine or build another trial farm. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Facing Issue while Installing SOA server for setting up BPM11g working environment

Hi All,
I have been able to install Database and Weblogic Server but I am facing issue in installing SOA server.
I am trying to install it for running BPM 11g application.
I saw the same problem has already been answered but available solutions are not resolving my problem.
Error Message:Provide the JDK/JRE location while launching the installer.Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path>parameter(s).
I tried both way for initializing the installation. i.e directly through setup.exe and by command prompt but in both the cases I am getting same error.
It is not asking for Java path in command prompt also.
a)In my system java 7 is installed.
b)I have used Oracle Database 11g instead of XE
Can this be the reason?
I checked Program Files:
jre7 and jdk1.7.0_45 are there.
I also have set JAVA_HOME in environment variable as C:\Program Files\java\jre7
path :C:\Program Files\java\jdk1.7.0_45\bin
Please help me in fixing this as I am stuck in this installation from last few days.
Thanks!

Hi Binay,
You might want to consider instead installing it using JDK 1.6.
Here's where you can check the Fusion Middleware configurations: http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It's buried in there, but bottom line is that Oracle BPM 11g (PS6) 11.1.1.7 needs JDK 1.6 (for Windows it is either JDK 1.6.0_35 or JRockit 6 Update 37 R28.2.5+) and I'd suggest you use JRockit.
Dan

Issue while installing FatWire on weblogic server

I was trying to install CS with Weblogic as the Application server.
During the installation of CS, I faced an issue while integrating with LDAP. In log it showed "Could not connect to the application server.Error in creating LDIF file.
I had given the valid credentials.
Have anyone faced this issue previously, if so please guide me thorugh.
And also, Is it mandatory to use LDAP ?
Thanks,
Rahul Nair

It sounds like the application server was turned off whilst you were running the LDAP configuration tool. The tool needs the application server to be running.
It's not mandatory to have LDAP integration with CS, from what I have seen most existing customers don't use it. There are also some performance benefits to avoiding LDAP integration.
If you do want LDAP integration then you don't need to configure it immediately after install. The LDAP configuration tool can be run separately, e.g. after you are happy the fresh install is working as expected.
Phil

Issue while installing Ms Project Server 2013 on MS Server 2012 R2 with Sharepoint Server 2013

Similar Messages

Maybe you are looking for