Project & WBS data
Hi All,
I have project & WBS data in my Datasource. I have checked using RSA3 for a Datasource, and i c that the Project and Wbs data appear exactly as the Table Data like
For Ex: Refer this Record values for WBS and Project respectuvely.
(WBS)P000254A1 and P000254(Project).
But when i replicate this Datasource in BW,,these above said values change to (WBS)1463 and 316(Project)
Y is this change involved when the Datasource in R.3 shows correct Data but while In BW it shows Something Else,,
Please Help on this Issue.
Thanks
Point Are Assured..
Hi Jr,
Sorry for the delay In reply!!
Im Checking the data in BI at PSA level.I just replicated the datasource then scheduled the infopak to DS to see it.
The DS is a Zdatasource which is made thru a Ztable. The table & ZDS in R//3 contains correct P******(WBS) and P****(project) data's,,but y is it wrong in BI??
Is there any conversion exits!!,,,Bcoz,project number starts vth P****** but earlier in my Ztable it was showing the same numerics which is as of now in BI,,So i checked on the SEttingsUserparameterthen Check on conversion exit Box,Then finally the Data gt changed to P********.So is there any technique like this in BI??
Please help
Similar Messages
-
Project/WBS Created date with Time
Hi,
How to see the Project/WBS Created date *with Time* in PS?
Regards
SankarSankar,
In CJ20N you will not find the creation time as this info is not stored in PRPS.
As a workarround, you can consider checking JCDS. In this table status change documents are stored. The date and time when each status was set and removed is stored.
Just check the date/time when status I0001 Created was set for your WBS element.
Please bear in mind that JCDS will only have entries if status change docs are active for your structures. You can activate the creation in OPSA (project profile)
Hope this helps
Regards
Martina -
How to download and upload long text for project, WBS , Network,
Hi all,
I have two isssues.
1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's
BAPI_PROJECTDEF_GETDETAIL
BAPI_PROJECT_GETINFO
BAPI_NETWORK_GETINFO
BAPI_BUS2054_GETDATA
I am able to get all the details except long text. I want to know how do i extract the long text other than getting it manually by using select_text and Read_text Function module, is there any bapi to achieve this.
The reason why i am not using Function modules Read_text and Write_text is, object name( TDNAME ) value stored in STXH table for project, wbs and network are the project, wbs and network itself so i dont have any issues with this but the TDname value for activity and activity element are completely different ( Routing number and counter is stored respectively ) which i am not getting as the part of the bapi(BAPI_NETWORK_GETINFO) output.
2) I have to upload the extracted Project and it sub object data to ECC 6.0 system , i am able to achieve this by using BAPI's BAPI_PROJECTDET_CREATE, BAPI_PROJECT_MAINTAIN and BAPI_NETWORK_MAINTAIN. I am not able to load the longtext for the same, is there any way to load the long text .
All help will be greatly appreciated and rewarded.
Thanks & Regards,
Rajanidhi Rajasekeran.I don't think there is any BAPI to do it.
We are doing it by read_text & edit_text . required fields for text name can be fetched by following select
if not e_activity[] is initial.
select aaufnr aaufpl baplzl bobjnr b~vornr
into corresponding fields of table t_longtext
from afko
as a
left join afvc
as b
on aaufpl = baufpl
for all entries in e_activity
where a~aufnr = e_activity-network
and a~aufnr is not null.
endif.
txtname = wa_longtext-objnr.
replace c_nv in txtname with sy-mandt. -
WBS dates not update in report
Dear All
I have created Project through Sales Order. Delivery date in sales order is end date of project
All activities are link (established relationship) one network and assigned to WBSEs in project.
I have also mentioned the normal duration for each activity in network.
I am doing scheduling of these activities with following specific requirements -
1) Backward scheduling is to be done...start date for network can be either today's date or it can also be in the past...end date for completion of network is fix.
2) Scheduling is to be done on entire project, the dates should be determined by the system for activities and should be transfered to the respective WBS elements (i.e. network determined dates)
I have maintained following config settings -
Scheduling Parameters -
Adjust date - 2 (do not adjust)
Scheduling type - 2 (Backward)
Automatic scheduling - Ticked
Reduction strategies - All opern in the order
Parameters of Scheduling -
Backward, network det date, adjust basic dates (tick), Automatic scheduling (Tick)
when I run scheduling for entire project its gives result properly but in report CNS41 my dates for ErlStrt(B) F and LtStrt (B) for WBS seen ##.##.#### .
Do I need to change anything in the config???
RegardsHi Ahemad
The issue was same with all reports. The date was display properly in WBS under dates tab or even I able to view report from CJ20N through Project Planning board (gantt chart) by selection of dates field. I only get problem under to column ie ErlStrt(B) and LtStrt (B) where dates was reflected ##.##.#### only for WBS but activities under same WBS dates shown properly.
Regards -
iam unable to fetch the WBS data for MEXICO orders with the follwing query
*.select all date activities found for the WBS
SELECT afvcprojn afvcaufpl afvcaplzl afvuusr00
INTO TABLE gt_sid_hod
FROM afvc INNER JOIN afvu ON
( afvcaufpl = afvuaufpl AND
afvcaplzl = afvuaplzl )
FOR ALL entries IN lt_vbup_vbap
WHERE afvc~projn EQ lt_vbup_vbap-pspnr
AND afvu~usr00 IN ('SID', 'HOD',
'RRD', 'ITD', 'SDD', 'DDQ', 'DID' ).
Can you please advise..there is any constaraints..
But the sale orders are aviable with Project and its activites
Thanks
RamHi ,
Thanks for answering
WBS element is not avilable in the AFVC table for the mexico orders,but it will update the WBS for the ohter organization.
please let me how the WBS can updated in the AFVC table.
Thanks & Regards
Ram -
Junk Character like "#" comes in the Project & WBS desc.....
Dear all,
When we transfer and release the project from C-projects module to PS,
then sometime, a junk character like "#" gets appended to the Project &
WBS description, when we retrive the Project in CJ20N. This junk
character creates a lot of problems in the reports, specially, when it
is exported to excel. due to this, all columns gets shifted in the
excel. After a lot of simulation, we found that if we unintentionally
give some spaces in the c-project description, then the junk character
gets appended to the PS description. What is the remedy ?? what should
be done to avoid this ???
Can any of you advise on this?
Thanks,
KumarCan you let us know exactly what is stored in the database?
What is the data type? Will you be able to paste the content of the cell that you are referring to?
What front end you are using?
Pradeep
www.lokahitam.com -
Posting expense amounts to cost center versus Project (WBS)
Hi,
I am an ABAPer. I have a basic FI doubt. We are using Project system in our company. Now for expenses, the employee enters the data in third party systems. Th third party systems then provide us with the data file which will be posted in SAP.
The business says that if a given expense by an employee, has Project status released, then the amount for that expense should be posted to cost center otherwise the amount for that expense should be posted to the project(WBS).
Now what does business people mean by posting expense amount to cost center or posting expense amount to Project (WBS). Where in FI can I see the option of posting amount to cost center versus posting amount to project ? Is there any transaction we can do that ?
Regards,
Rajesh.Dear Rajesh,
If there is a corresponding wage type for expenses, you would assign GL Accounts to the corresponding symbolic accounts of HR Payroll. You would run the payroll.
Which means that wage types are assigned to symbolic accounts and symbolic accounts point to GL Accounts.
In HR, expenses are dealt mainly in Travel Management for travel expenses etc.
in SAP Easy Access Menu, Accounting -> Financial Accounting -> Travel Management -> Travel Expenses
F-41 and F-43 are one and same except the fact the F-41 has defaulted with document type KG (Vendor credit memo) and F-43 with KR (Vendor Invoice) which you can change. You should use Document Type KR for Vendor Invoices.
The payments will be released once you run payment program to run due A/P open items.
Regards,
Naveen. -
One report to check status of project/wbs(TECO/REL)+ available budget
Dear All,
Please advice. Is there any report (one for all ) which can show Status of project/wbs + available budget of a project. I tried cns43, cn41 and report s_alr. But it shows in different tcode/report. Hopefully there is a standard report that can show these in one report.
Many thanks in advance.
NiesCN41 shows the Current Budget and not Original Budget.
If Available Budget in your terms means difference between Current Budget and Actual, you can include a column 'Difference' from menu.
Select the Column Budget 1st, Menu Edit>Comparison> Choose Actual Cost.
The output shows the difference and percentage. Problem now is you can't view the status.I can't think of anything standard which exactly gives the ouput columns you are expecting.
Regards
Sreenivas -
Error in Loading Project master Data into BW from R3
Hi Experts,
Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Exception CX_SY_REF_IS_INITIAL
Date and Time 27.09.2011 01:47:15
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_CGPL_TASK==================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->OUTLINE_PARENT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
I am seeking help from you guys.
Please help to overcome this problem...!
Thanks.it seems basis issue
howver check below links
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
thanks
pathak -
Idoc_input_orders populate WBS data element in each line item
hi experts,
an idoc is passed thru the standard FM(idoc_input_orders) to create SO. Based on E1EDP19, I am populating WBS data in the WBS element in Account Assignment tab for each line item in the SO. I've EXIT_SAPLVEDA_002 UE, but called for so many time. Is there a way to be called only once for each line of the sales order.
Your contribution is greatly appreciate.
Regards,Hi
Go to WE19,
Take the IDOC, and change the item index between items.
For example for item 10 index should be 1.
For item 20 index should be 2.
This is happening because there are many items in the idoc and no difference for the child segments to identify their own childs.
Warm Regards,
Baburaj -
Problem opening Project/WBS Elements in CJ03
Hi Experts,
I have created an interface which posts PROJECT01 Idocs into SAP 6.0. Idocs are posted successfully and I can see Projects/WBS elements in tables PROJ and PRPS.
However, when I try to open a project/wbs through transaction CJ03, it throws short dump mentioning memory overflow. I checked by debugging CJ03 and found that the code is going into infinite loop.
Could anyone help me understand why this kind of problem is coming? What is the reason the code is going into infinite loop? If the project/wbs structure is not getting created properly, how can I check that?
Thanks in advance.
NetreyThe issue is resolved. The structure coming throug Idoc itself was incorrect.
-
Problem in MRP run with Project/WBS Element
Dear PP Gurus,
I want to run MRP thro Project/WBS Element.
I have created WBS Element & WBS BOM for Material. Then created sales order for that material and assign WBS element to sales order.
Maintain Planning Strategy 21 ( Make to Order/Project) for Main Mtl.
Now when I run MRP with MD51 then no requriements are generated for main material and its components.
Is there any thing missing from PS-PP & SD point of view?
Pl guide me for the same.
Thanks in Advance.
UmeshDear Nagrajan,
Thanks for your reply.
There is no safety stock & un-restricted stock of that material.
Also I don't want to assign this mtl to that wbs Network. If I assign the Material to WBS network then network req.is generated and thro Normal MD02 MRP generates the requirements.
& in the plan order it will not show WBS Element
But My req. is I want to run MRP with MD51 & want WBS element as account asignment tab in plan order & production order too.
IS there any config. missing from PP/ PS / SD ?
Pl guide me for the same.
Thanks ,
Umesh -
Project WBS not visible in SRM
Hi All,
We have created Shopping cart in SRM and user wants to do shopping with respect to the particular Project (WBS Element). except of that project all other projects are visible in SRM.
That Project is released and active in ECC System. My question is how to activate that Project in SRM so that USer can do shopping based on that Project?
Regards,
LovkeshHi
Please check these below configuration in EBP
SPRO-> ...--> Define account assignmnet category .Here you check whther you have activated foe WBS
and Define GL account for product category and a/c assignment category.
Moreover you can check whther you included in the attribute.
(WBS element (PRO) in the Organisational Structure i.e PPOMA_BBP)
Muthu
Edited by: muthuraman on Jul 24, 2008 3:09 PM
Edited by: muthuraman on Jul 24, 2008 3:20 PM -
How does the project expiry date work?
I am looking to buy Captivate. But I first need to know how the project expiry date works.
I am currently producing a short course for a company in my area, but our agreement is that they get to use the short course for a period of 3 months. If I create the short course in Captivate, will I be able to set an expiry date on the project? For example, person A buys my short course. After 3 months (or however long) the course expires and he will no longer be able to open the short course. Is this what the expiry function does?
Also, does the expiry function work even if the project is copied from one hard drive to another? For example, if someone makes a duplicate of the project onto a friend's hdd, will both projects still expire after 3 months?
Thanks guys.Hi there,
I have been a Articulate Storyline users for several years now and am new on the Captivate forum. Someone told me that Captivate can set an expiry date on the course content after being downloaded on an iPad for offline viewing (so without an LMS). In Articulate SL this is not possible unfortunately although a feature request has been made by quit a few. Situation is that I deliver course content to clients operating in remote areas (shipping). It is essential for me to have this feature and will seriously consider changing over to Captivate if this is true.
Could anyone help me out on this one?
Thanks in advance for sharing!
Regards,
John -
Hi all,
1 have an installation with three MDC Xserves (10.6.2) ,8 Mac Pro clients ( 10.5.8 ) with XSAN 2.2.1 and Open Directory .
The MAC pro clients have Final Cut Pro 6.0.6 installed.
When we modify a project in FCP and save it then the creation date of the file changes to the modification date. This behavior happens only in the XSAN volumes and only for the FCP projects, if we create a text file , edit it and then save it the modification date changes but the creation date is not affected .
Thanks in advance.
Mac Pro Mac OS X (10.5.8) Xsan 2.2.1 & Final Cut Pro 6.0.6Hi Uday,
Thanks for your post.
It seems the created date not stored in Project object in TFS API. To get team project created date automatically, you can query the date from
[Tfs_DefaultCollection].[dbo].[tbl_projects]
table>> [last_update]field use coding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Could you be specific where the files to fix this are?
-
Is it possible in KM to change "create new file" dialog?
Is it possible in KM to change "create new file" dialog (Folder -> New -> Text File...) on consecution of my own screens(I mean user inputs information, presses next button, then again inputs information and so on)? And if its possible, could you ple
-
hi all i need your help to give me the solve of my issue i need to increase the refresh rate of portal 10g on unix 5.10 MANY THANKS
-
Check Deposit List Overview (FF68)
Hello all, I have a new accounting rep who entered a manual entry into our check register with the processing type: 1 Further processing as batch input (generate online) We normally process our manual entries with processeing type: 4 Further
-
XSLT single elements to multi elements
I need to transform the input on the left into the format on the right with a transformation in jdeveloper BPEL: Coming In: Desired Output: <inputone>test1</inputone> ---------> <input attr="one">test1</input> <i