Promoting org values in development system

Hello,
I have to promote org value called LEC in the development system. Can anyone suggest me how to do this.
Thanks

Authorization field can be changed to Organization field using PFCG_ORGFIELD_CREATE by using SE38 or SA38 transaction.   Please use TEST MODE before executing into real mode.
u2022     Organizational level fields should only be created before you start setting up your system. If you create organizational level fields later, you might have to do an impact analysis. The authentication data may have to be post processed in roles.
u2022     The fields "Activity", "ACTVT" and "Transaction code", "TCD" cannot be converted into an organizational level field.
In addition, all affected roles are analyzed and the authorization data is adjusted. The values of the authorization field which is now to become the organizational level field are removed and entered into the organizational level data of the role.
Note: Table for Org Element- USORG
Refer to Note 323817 for more detail.

Similar Messages

  • LV 8.6 will Not Compile in LV 2010 - Labview 10.0 Development System Has Encountered a Problem and Needs to Close

    I submitted this support request to NI on 8/12/2010.
    When I compile my LV 8.6 app in LV2010 I get this error:
    "LabVIEW 10.0 Development System has encountered a problem and needs to close.  We are sorry for the inconvenience."
    I was told to do a "Mass Compile" of my LV 8.6 app in LV2010...this failed too.
    I was then told to go to each and every vi and "Mass Compile" individually...after about the 50th vi this got old quickly...and it still didn't compile.  I then sent NI tech support "my code".  The good news is my LV 8.6 app didn't compile with LV2010 @ NI.
    My LV 8.6 app compiles and runs great in LV 8.6.  I don't want to be left behind with the newer upgrades and I want to move to LV2010.  I have lots of LV8.6 code to maintain and I really don't have the time to debug all of my apps.
    I was told this will be looked @ in LV2010 SP1.
    One note...back up your LV8.6 data before you move to LV2010.  Once your LV8.6 code is compiled in LV2010 you will not be able to go back to LV8.6.
    I restored all of my LV8.6 code and I'm back working with LV8.6.
    It's a tough call, do I stay in LV8.6 and get left behind?
    Do I bite the bullet and try to debug this mess in LV2010?
    I was told the compiler is completely different in LV2010.  That's great, but one reason I have NI Maintenance Agreement is to keep updated with the latest software.  I can't afford to re-compile LV code every few years.  Like most people, maintaining my Apps with customer's revisions, and modifications is enough work.  I don't want more work!
    I was told LV2010 SP1 would likely appear in May or June of 2011.  I'd hate to break out my old Turbo Pascal apps again...but hey...they still work!  My NI maintenance agreement is due this month too, I guess I'll pay NI one more year, and see if they come up with a solution.  But if NI doesn't fix this LV8.6 compile in LV2010 problem...I don't see any value staying current with LV software.
    I found another Bug with LV2010...you are going to love this one!
    There is a new "LV Update Service".  Perfect!  I like updating my LV software when new patches are available.  When I click "update" the update spins over and over "Checking for New Version".  I have let it run ALL day with no results...just sits and spins over and over.
    OK, I know give NI a break!  Yes, LV2010 has a new compiler...and Yes, I will renew my NI maintenance agreement.  I just want NI to know failing to compile just one LV8.6 app in LV2010 is not a good idea for customer relations.
    Thanks,
    Doug

    For your update service problem
    Unable to Update Current Version of NI Update Service
    Why am I Unable to Update My Version of NI Update Service in Windows Vista or Windows 7?

  • How to populate SNDPRN with different values in Development and Production?

    Hello experts,
    I have to fill the field SNDPRN in the message mapping with a different value in Development and in Production. As I am new to PI, I used a simple solution - but it is rather ugly: I set a constant value in the mapping in development and a different one in Production. However, I would like to know if there is any solution to have a condition in the mapping like:
    IF system is Development, set SNDPRN as Constant1.
    IF system is Production, set SNDPRN as Constant2.
    (And eventually IF system is Test, set SNDPRN as Constant3)
    Thanks in advance for your help,
    Luis

    Hi Luis,
          You can go with the parameterized mapping , where you can provide different values for SNDPRN in interface determination for development and production.
          At point of time if you want to change the values it requires only a change in the configuration.
          Please refer the below links for reference;
    Parameterized Mapping Programs - Enterprise Services Repository - SAP Library
    http://scn.sap.com/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
         We are following the same approach for some of our interfaces.
    - Muru

  • Transport Webi Reports and Web services as the backend of dashboards from BO Production to BO Development system

    Hello Experts,
    I am working on SAP BO 4.1. I have made several dashboards on top of web services ie;Web Service Method. I have 2 systems in BO ie; Development and Production Systems.The BW production system is connected to BO Development and Production both.
    The Webi reports are made on top of BI BEx Query. From the webi reports, BI Web Services are made on top of which the dashboards are made further.
    The Webi Reports, Web Services and the Dashboards everything is made directly in BO Production.
    My question is, Can I transport the Webi Reports and the Web Services from BO Production to BO Development?
    And If yes, will it have any other impact on webi reports, web services or dashboards?
    Thanks & Regards,
    Alfred Thomas

    Hi Gill,
    As per your reply,with the promotion managament i have make the web services again manually in Dev system...Right?
    Is there any way possible that i can transport the webservices and the webi reports usind Query AS A Web Service Designer. And if yes, through this QAAWS will the WSDL or the URL required for the web services in the connection button in dashboards will automatically updated or changed as per the Development System?
    But i am not able to enable the "Deploy to Other servers Option" in QAAWS.
    Can you please help?
    Regards,
    Alfred thomas

  • Development System Backup - Best Practice / Policy for offsite backups

    Hi, I have not found any recommendations from SAP on best practices/recommendations on backing up Development systems offsite and so would appreciate some input on what policies other companies have for backing up Development systems. We continuously make enhancements to our SAP systems and perform daily backups; however, we do not send any Development system backups offsite which I feel is a risk (losing development work, losing transport & change logs...).
    Does anyone know whether SAP have any recommendations on backuping up Development systems offsite? What policies does your company have?
    Thanks,
    Thomas

    Thomas,
    Your question does not mention consideration of both sides of the equation - you have mentioned the risk only.  What about the incremental cost of frequent backups stored offsite?  Shouldn't the question be how the 'frequent backup' cost matches up with the risk cost?
    I have never worked on an SAP system where the developers had so much unique work in progress that they could not reproduce their efforts in an acceptable amount of time, at a acceptable cost.  There is typically nothing in dev that is so valuable as to be irreplaceable (unlike production, where the loss of 'yesterday's' data is extremely costly).  Given the frequency that an offsite dev backup is actually required for a restore (seldom), and given that the value of the daily backed-up data is already so low, the actual risk cost is virtually zero.
    I have never seen SAP publish a 'best practice' in this area.  Every business is different; and I don't see how SAP could possibly make a meaningful recommendation that would fit yours.  In your business, the risk (the pro-rata cost of infrequently  needing to use offsite storage to replace or rebuild 'lost' low cost development work) may in fact outweigh the ongoing incremental costs of creating and maintaining offsite daily recovery media. Your company will have to perform that calculation to make the business decision.  I personally have never seen a situation where daily offsite backup storage of dev was even close to making  any kind of economic sense. 
    Best Regards,
    DB49

  • CS-3 Image Viewer - works in Development system - some (not all) site failure

    I've looked at a number of discussion topics on the CS-3 Image View slide-show not working on the Website.  I have the AC_RunActiveContent.js file located in my Scripts folder on the Web-site.
    I have correctly opperating slide-shows working on the site - one correct page is - http://www.billyandgracetea.com/Contact1.html.
    One kinda flaky page is - http://www.billyandgracetea.com/Photo1.html.
    And the page that totally fails is - http://www.billyandgracetea.com/Summer2010-Pics.html.
    The page that totally fails - works correctly in my Development System - but fails on the Web-site.  It works correctly with the Play button and also when I compile the page with the Function Key 12 (although I am asked if I want to allow the running of Active X).
    The flakey page - doesn't always run through all 18 sides - sometimes running 1 thru 7, then starting back at 1, etc.
    The file system for ALL html files is the same on the Web-site.
    How can I fix the page that totally fails ?  Is having 18 sides in the Flaky page - too many sides ?

    On http://www.billyandgracetea.com/Summer2010-Pics.html
    Is this path correct?
    <param name="movie" value="Pictures/flashslide-3AA.swf" />
    which points to
    http://www.billyandgracetea.com/Pictures/flashslide-3AA.swf
    File Not Found

  • Getting dump when you hire an emp in Development system

    Hi,
    We are getting an ABAP dump when we hires an emp in development system where as the dump is not coming in Quality system. Kindly suggest any config settings need to changed.
    Please find the dump below for reference:
                                                                                    Error analysis                                                                               
    An exception occurred that is explained in detail below.                                
         The exception, which is assigned to class 'CX_HRPA_INVALID_PARAMETER', was not          
          caught in                                                                               
    procedure "RESOLVE_EXCEPTION" "(FORM)", nor was it propagated by a RAISING              
          clause.                                                                               
    Since the caller of the procedure could not have anticipated that the                   
         exception would occur, the current program is terminated.                               
         The reason for the exception is:                                                        
         Invalid parameter EXCEPTION, value                                                                               
    The occurrence of the exception is closely related to the occurrence of                 
         a previous exception "CX_HRPA_INVALID_INFOTYPE", which was raised in the                
          program "CL_HRPA_INFOTYPE_FACTORY======CP",                                            
         specifically in line 18 of the (include) program                                        
          "CL_HRPA_INFOTYPE_FACTORY======CM004".                                                 
         The cause of the exception was:                                                                               
    Infotype 0529 not permitted                                                                               
    Rgds
    Kumar

    Hi,
    Maybe specific to your master data maintainance, as it is working inQS1.
    Regards
    Team Member.

  • Wildcard character in Org value

    I have a requirement wherein ,I have to provide access to all cost centers with pattern 200ABUS,200CDUS,200XYUS,etc.
    I want to use 4th and 5th character as wildcard,but neither + nor ? works.I have tried 200++US and 200??US,but system didn't recognize these as wildcard character.
    System is currently on SAPKB70106 support pack for SAP Basis Component.
    Is it possible to use single wildcard character in org value?

    Hi,
    I recommend you use the search function.  There is the same topic on the 1st page of the forum. 
    In R3 role design , "filling character" for org level required
    The quick answer is that you cannot achieve what you want.

  • Org. value sync job in ERM

    Hello experts,
    Scenario: Our backend system consist HR component, but we do not use it and therefore do not want to implement the HR RTA
    So my question is, Is it possible to skip the HR contents for the org. value sync job in ERM? As we encounter error when running the report, and if possible, we would like to skip the HR contents which is not neccessary for our environment.
    Appreciate any feedback for this, thank you in advance.
    regards,
    weihow

    Hello Wei,
    If your system has SAP_HR component installed then you must install the VIRSAHR component for GRC as well. Reason being that there are some function modules which are there specifically for system with SAP HR component installed. If SAP HR is there then GRC applications will use the functions available in VIRSAHR component for activities. If you do not install them then this can lead to problems. You can refer to SAP Note 1086823 which confirms this.
    Regarding the ORG value sync job, you can customize it to not to pick any specific type of data. It will pick all the ORG value related data in your system.
    Regards,
    Varun

  • Transporting issue from Developement System to Quality System

    Hello Experts,
    We are facing a problem in which address details in developement system are getting displayed and when the same code is transported to the quality system then the address fields are not getting displayed.
    While debugging we found out that there is a variable which is calling the view (responsible for displaying address fields) in the developement system but the same view is not called in the Quality System.
    We tried all sorts of backtracking but could not find where the variable is getting the values from.
    Kindly Guide.
    Regards
    Sanket Jain
    Edited by: Jain Sanket on Mar 22, 2011 3:57 PM

    Hi BW Star,
        I am transporting a process chain for deleting ODS change log from dev system to quality system. It is working fine in the dev system, but when transported to quality system, its process variants becomes empty for all the included ods change log delete steps. object_type and object_name field in variant becomes empty.
        Thanks for your help.
    Regards,
    Shankar

  • CRM security - is look up table possible for Sales org value

    I have a requirement in CRM role where the sales organization value has to taken from a table. Since this value is different between development, Quality and production.
    Please advice if I can set the field to all the three values or is there way make the field value in role point to a table where the sales organization value will be maintained.

    Hi ,
    Did you mean to say you will have one sales org value in DEV?
    another in Quality? third variation in Production?
    If this is the case , its not a good practice
    Answer:
    If you have tried all standard options and still insist that table is the method you want to follow:
    creating a custom authority object, custom field name  with the option to have one of the three values from the table under the field name is possible (ABAP DEVELOPER should work with you on this ).
    Regards

  • Unable to login in sap development system

    When iam applying service packs, some has restarted the server. After restart the system everything is fine MMC is started. Database connection is ok. tp connection ok. Every thing is ok.  When iam trying to login sap system I entered ddic user 000 client. Iam not able to login to my system.
    The error which iam  getting is  Sid: SYSTEM MESSAGE SYNTAX ERROR IN PROGRAM SPAMS380.
    I'am not able to login any client, with ddic,sap*, any user id.
    Please give me the solution quickly.
    I'am Applying  Support Packs in Development system.

    Hi,
    try to execute this query..
    logged in the Database Oracle level, as SysDBA & executed the SQL Statement
    delete from <HOSTNAME>.<SID>.<object_owner>.USR02 where BNAME='SAP*' and MANDT='000';
    after this bring down the instance and restart. then SAP will re-create SAP* userid and with default password "PASS" (case sensitive).
    OR
    login/no_automatic_user_sapstar=0
    after restart the instance.
    hope this info helps you!
    Rewards points if helpful
    Thanks
    Pankaj Kumar

  • New Development system copy from Production

    Hi All,
    Hope you can help me out here with some ideas.
    We are currently planning to implement a new SAP BW Development system, and for this we would like to make it a 1:1 copy of our current production system. Meaning all from customizing, ABAP, workbench objects etc.
    But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
    My question is then, is there any other ways to do this when system copy is a no go? I know we can do client copy but then we will not get all the workbench / ABAP programs which we need.
    Any ideas on how to do this?
    Thx. in Advance

    Hi Rasmus,
    But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
    Options 1: As BI objects are cross client , copying client will not solve your purpose 100%.
                    You can perform system copy and then clean up data in DEV
    Option 2: You can create a new Development and then create TRs for required configuration objects and move to new development system.
    Option 3: Use SLO tools to perform container copy without any data.
    Hope this helps.
    Regards,
    Deepak Kori

  • VISA Write differs between TS Development System and LV Run-Time Engine

    Hi all
    I made an application on LabVIEW to test BERs (Bit Error Rates), and I used VISA Write between two COM ports to exchange data.
    Everything works fine using just LabVIEW.
    Afterwards, I used TestStand to call my application (VI). The LabVIEW adapters from TestStand were set to Development System by default, and everything works OK!!
    Finally, I needed to disable the development system, and set the LabVIEW adapters from TestStand to LabVIEW Run-Time Engine and I notice that the speed of the data exchange between the two COM ports decreased dramatically.
    The only difference was the speed...because all the data (changed slowly in this case) arrived correctly on the other COM port too.
    The symptom was the same as decreasing the baud rate...but the baud rate and all the other configurations remained the same. The only difference was the change between Develpment System to Run-Time Engine to notice this decreased speed between the exchanged data using VISA Write.
    Any solutions for this?
    Thanks in advance
    Joao
    Solved!
    Go to Solution.

    Joao,
    you state that using the LV Developement System as execution platform for your LV code modules result in faster datatransfer between the COM ports than using the LV Run-Time Engine.
    So i am pondering: Does this refer to TS at all?
    Please check the following:
    Run you communication using a sole LV application in LV Developement System. This should be fast. Now build an executable of this application and run that one. Do you see the same behavior?
    If there is no difference in a sole LV approach, there have to be some settings in the TS approach making this slow. So please let us know:
    Are there different modules involved in that data transfer (which in fact points to the reply Christophe made)?
    What about loading/unloading options of the modules?
    How big is the hierarchy of the modules, e.g. is it necessary for the RTE to load stuff the Dev Env has already in memory due to loading a lvproj.......?
    Could you provide a simple example sequence+modules showing this behavior?
    What versions of LV and TS are you using?
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

    I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
    ErrorCode: -17600,
    Failed to load a required step's associated module.
    LabVIEW Run-Time Engine version 9.0.1f3.
    When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
    My TestStand Engine Version is 2012 f1 (5.0.0.262).
    I'd appreciate any help on this issue.
    Roman

    Hi Roman,
    There are a couple of things you can try:
    1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
    Check if the simple VI is loadable and runs without errors in TestStand.
    If the step generates the same error, you should try a re-install of the LabVIEW development system.
    If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
    1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
    Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
    Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
    2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
        Right-click "Build Specifications" and choose "New->Application(EXE)".
        In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
        Save the properties.
        Right-click on the newly created build specification and choose Build.
    Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
    You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
    Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
    If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
    Regards,
    TRJ

Maybe you are looking for