Proper Syntax to Join on Common Attributre value
Does anyone know how to write this query properly?
"Display customer pairs as (first mi last) (first mi last) who are from the same state. Also how their respective states."
The table structure is appended at the bottom of this message.
I have ready tried a recursive join using a table alias. There is a problem though, the result set returns duplicate information. 14 rows are returned, but only 7 are unique customer/state pairs.
Return set:
..COLs 1-3....COL 4-6 .....COL 7
Customer-1 Customer-2 SomeState
Customer-2 Customer-1 SomeState
SQL query using a table alias to recursively join on "State" column:
SELECT "A"."c_first",
"A"."c_mi",
"A"."c_last",
"B"."c_first",
"B"."c_mi",
"B"."c_last",
"A"."c_state"
FROM "customers" "A",
"customers" "B"
WHERE ( "A"."c_state" = "B"."c_state" ) and
( "A"."c_id" <> "B"."c_id" )
I have tried modifying the above witih "IN" and "NOT IN" sub queries.
Table Structure:
CREATE TABLE CUSTOMER (
CUS_CODE NUMBER PRIMARY KEY,
CUS_LNAME VARCHAR(15) NOT NULL,
CUS_FNAME VARCHAR(15) NOT NULL,
CUS_INITIAL CHAR(1),
CUS_AREACODE CHAR(3) DEFAULT '615' NOT NULL CHECK(CUS_AREACODE IN ('615','713','931')),
CUS_PHONE CHAR(8) NOT NULL,
CUS_BALANCE NUMBER(9,2) DEFAULT 0.00,
CONSTRAINT CUS_UI1 UNIQUE(CUS_LNAME,CUS_FNAME));
Sorry, I just relaized that that was a bad link I put into my post. I just fixed it.
Did you get that without the link? If so, very good. It could be a little simpler, check the fixed link.
Also, I would have words with my instructor if they were making me double quote everything because they made case sensitive table and column names :-)
Cheers
John
Similar Messages
-
I need to know the proper syntax for my SELECT query, please.
Hello All,
Quick one for you:
Let's say that I have several columns in a table with names such as subject_1, subject_2, subject_3, etc. The table's name is subject_names.
The number in each of the three column name examples is also a value passed along a query string, the user can select choices, 1, 2 or 3. That query string's variable is $qs.
So, what I want is a SELECT query that uses the query string value as follows (KEEP IN MIND, I know this is not the proper syntax):
"SELECT subject_[$qs]
FROM subject_names";
I have tried all sorts of cominations of quotes (single and double), dots, brackets, braces and parenthesis. I just want to know how to include such a variable within this code.
Any and all help is sincerely appreciated!
Cheers,
wordmanWell, I did give you the syntax though.
$query = 'SELECT ' . $qs . ' FROM tbl_name';
I put spaces between the periods this time to make it more clear.
If you put the actual word 'subject' in there and just want your form to name it's options as the numbers available you could do this:
$query = 'SELECT subject_' . $qs . ' FROM tbl_name';
In PHP you can use either single or double quotes around your query string, I always just use single quotes. I see a lot of other use double quotes.
Double quotes would look like:
$query = "SELECT subject_' . $qs . ' FROM tbl_name";
Or when using double quotes you can actually just place the variable right in the string without having to concatenate multiple strings like above.
Since you mentioned that you are good with passing variables I probably don't have to mention that you need to set the value attribute of your option tags (if you are using a select) to the value you want them to pass.
Ex:
<select name="choices">
<option value="1">1</option>
<option value="2">2</option>
<option value="3">3</option>
</select>
If you have that part all figured out then you can use the syntax above for your query string.
Good luck. -
What is proper syntax for using PassBack in a Report page select statement
In my select statement I reference the passBack function using:
onClick="javascript:passBack()"
In my Page Header I (Typically) define the passBack function as:
<script language="JavaScript" type="text/javascript">
function passBack(passVal1,passVal2) {
opener.document.getElementById("P2000_CABLE_ID").value = passVal1;
opener.document.getElementById("P2000_CABLE_LABEL").value = passVal2;
window.opener.location.reload(true);
</script>
But I have never used the passBack function from the Select statement before and cannot happen onto the proper syntax.
The Page Items I want to pass are:
1. :P2004_CABLE_ID
2. :P2004_LABEL
I want to pass them to:
1. :P2000_CABLE_ID
2. :P2000_CABLE_LABEL
Can someone please help me out... Again?
Thanks- GaryLet's assume column XYZ has both numbers (1), and letters (any alphabet).
I have a case statement on SQL to turn any value that's not 1 into 0, then I am getting a sum of that column.
I am also grouping by Row A, B etc to get aggregated sum of column XYZ for those group.
Now on Crystal Reports function, I need to sum up values under column XYZ for all the groups.
If I try using sum function like below, I get an error stating:
"A number field or currency amount field is required here"
(sum({Command.XYZ}))
So I thought if I can use a case statement to change the non-numbers to 0 prior to sum that will probably resolve it. But I could not get the below case statement to work either (Error: A string is required).
SELECT {Command.XYZ}
Case 1:
1
Default:
0; -
Proper syntax of the file name to attach files in FNDATTCH.fmb
Can you please tell me the proper syntax of the file name to attach files in FNDATTCH.fmb ?
i am not able to open attached document if it contains & in the file name..So i wanted to know the rules to give the file nameThis has nothing to do with the TB display. You should repost in the computer forum
-
Outer join With a constant value
Hi all,
In one of query i have found out that the outer join with a constant value like
to_currency(+)='USD'
to_currency is a column name in a table.can any one please explain this outer join condtn.
Thanks in advance
SenthilHallo,
if you write var (+) = constant
var can be equal constant, and also can be null
Compare these 2 queries
select e.* from scott.emp e, scott.dept d
where e.deptno = d.deptno(+)
and d.deptno(+) = 10EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-Dez-1980 800 20
7499 ALLEN SALESMAN 7698 20-Feb-1981 1600 300 30
7521 WARD SALESMAN 7698 22-Feb-1981 1250 500 30
7566 JONES MANAGER 7839 2-Apr-1981 2975 20
7654 MARTIN SALESMAN 7698 28-Sep-1981 1250 1400 30
7698 BLAKE MANAGER 7839 1-Mai-1981 2850 30
7782 CLARK MANAGER 7839 9-Jun-1981 2450 10
7788 SCOTT ANALYST 7566 19-Apr-1987 3000 20
7839 KING PRESIDENT 17-Nov-1981 5000 10
7844 TURNER SALESMAN 7698 8-Sep-1981 1500 0 30
7876 ADAMS CLERK 7788 23-Mai-1987 1100 20
7900 JAMES CLERK 7698 3-Dez-1981 950 30
7902 FORD ANALYST 7566 3-Dez-1981 3000 20
7934 MILLER CLERK 7782 23-Jan-1982 1300 10
select e.* from scott.emp e, scott.dept d
where e.deptno = d.deptno(+)
and d.deptno = 10 EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7782 CLARK MANAGER 7839 9-Jun-1981 2450 10
7839 KING PRESIDENT 17-Nov-1981 5000 10
7934 MILLER CLERK 7782 23-Jan-1982 1300 10
As you can see, this (+) is very important
Regards
Dmytro -
Where is common xsl:-value of tasks in SPD 2013
I am not able to find the option to convert the column to hyperlink in SPD2013. . I have a content editor webpart which links to dataview webpart via hyperlink in SP 2010 on the same page w this does not work as i dont see the "common
xsl:-value of tasks" option due to missing design view..Is there any workaround to convert the coulmn name to hyperlink in SPD2013?
Amrita TalrejaHi,
According to your post, my understanding is that you wanted to convert the column name to hyperlink.
We can still use the SharePoint Designer to achieve it, you can change the column type on a column level.
You can also use the xslt to achieve it. Here is a simple example for your reference.
http://sharepoint.stackexchange.com/questions/41395/how-to-convert-column-field-into-hyperlink-with-xslt
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Proper syntax when binding a boolean to a view node
What is the proper syntax for binding a nodes visability (or any variable that can be bound) to a boolean variable.
There are three choices, tell me which of the fallowing is proper.
var loginPassed: Boolean = false;
var loadingBox: VBox = VBox {
visible: bind if (loginPassed) then true else false
content: [loadingLabel,progressIndicator]
var loaddingBox: VBox = VBox {
visible: bind loginPassed
content: [loadingLabel,progressIndicator]
var loadddingBox: VBox = VBox {
visible: loginPassed
content: [loadingLabel,progressIndicator]
}Let me know and thanksYes it seams that the problem was not with my bind of the content. The error was actually occuring when running in browser mode. At start up the program was throwing an odd exception. Showing in the stack trace were traces of Node and boolean.
The error was being thrown when I had Control.TextBox as my default input focus.
After changing the TextBox to a SingExtension.TextField the error went away.
I will try to reproduce the error and post in a seperate thread. -
Proper Syntax -- Src-Addr Filter IPS Signature Tuning
Anyone know what the proper syntax to define Src and Dest addresses within a Signature? I am trying to define the default Private IP ranges as src addresses in signature 3030 and keep getting errors regarding the syntax.
I have tried ip/netmask and defining the netmask as 255.255.0.0 and so on.Many Thanks for the reply!
I searched the manual and this site up and down for that information and didn't find it documented anywhere. -
Proper syntax???
I was trying to find out the proper syntax for the following select statement. I just started JSP and cannot find info on this. Is this proper?? --
String Pass= request.getParameter("Password");
String sql = "Select WEB_USER_ID FROM WEB_USER_INFO WHERE UserName = Pass";
Thank you for the help!!I tried that and got the following error. The asdfasdf is what I typed in the password field.
500 Servlet jspservlet: unable to service request: [Sybase][ODBC Driver][Adaptive Server Anywhere]Column not found: Column 'asdfasdf' not found -
SQL Join help for multiple values in single field.
Hello All,
I need a help, I have two tables T1 and T2
Content of T2 will be like
T2. ID | T2.USERNAME
ID1 | John
ID2 | Peter
ID3 | Mark
Content of T1 is like
T1.ID
ID1 ID2 ID3
ID2
ID1 ID3
I need to join these two tables and replace the T1.ID values with T2.USERNAME, for eg. Row one of T1 should be changed as John Peter Mark.
Note: ID1 ID2 ID3 is a single value.
Thanks for your help.
Sathish.At Volder: I have made a slight enhancement. It's the same thing but the other way around as last week's regular expression thread. Remember the "and then the bird flew away"? ;-)
SQL> create table t1
2 as
3 select 'ID1 ID2 ID3' id from dual union all
4 select 'ID2' from dual union all
5 select 'ID1 ID3' from dual union all
6 select 'ID11 ID2' from dual
7 /
Tabel is aangemaakt.
SQL> create table t2
2 as
3 select 'ID1' id, 'John' username from dual union all
4 select 'ID2', 'Peter' from dual union all
5 select 'ID3', 'Mark' from dual union all
6 select 'ID11', 'Volder' from dual
7 /
Tabel is aangemaakt.
SQL> select * from t1
2 model
3 reference r on (select t2.*, rownum rn from t2)
4 dimension by (rn)
5 measures(id, username)
6 main m
7 dimension by (id)
8 measures(cast(id as varchar(200)) str)
9 rules iterate(100) until (r.id[iteration_number+1] is null)
10 (str[any] = replace(str[CV()], r.id[iteration_number+1],r.username[iteration_number+1]))
11 /
ID STR
ID1 ID2 ID3 John Peter Mark
ID2 Peter
ID1 ID3 John Mark
ID11 ID2 John1 Peter
4 rijen zijn geselecteerd.
SQL> select id
2 , str
3 from t1
4 model
5 reference r on (select id,username,rownum rn from t2)
6 dimension by (rn)
7 measures (id, username)
8 main m
9 dimension by (id)
10 measures (cast(' ' || id || ' ' as varchar2(200)) str)
11 rules iterate(1000) until (r.id[iteration_number+1] is null)
12 ( str[any] = replace
13 ( str[cv()]
14 , ' ' || r.id[iteration_number+1] || ' '
15 , ' ' || r.username[iteration_number+1] || ' '
16 )
17 )
18 /
ID STR
ID1 ID2 ID3 John Peter Mark
ID2 Peter
ID1 ID3 John Mark
ID11 ID2 Volder Peter
4 rijen zijn geselecteerd.At Sathish: just look at the queries we have to come up with to do such a simple thing. As said many times before, I would also encourage you to change the design instead of executing the queries presented by Volder and me.
Regards,
Rob.
Message was edited by:
Rob van Wijk
Just noticed I missed a final TRIM function around "str", so please add this. -
ANSI SQL 92 SYNTAX OUTER JOIN PERFORMANCE ISSUE
Good Morning
Could anyone explain why the excution time for these two (ment to be identical)
queries run so differently.
oracle syntax execution time 1.06 seconds
select COUNT(*) from
PL_EVENT_VIEW pev,
PL_EVENT_STAFF_VIEW pesv
WHERE pev.EVENT_ID=PESV.EVENT_ID(+)
AND pev.WEEKS=PESV.WEEK_NUM(+)
AND pev.event_id=2520
ansi sql 92 syntax execution time 7.05 seconds
select COUNT(*) from
PL_EVENT_VIEW pev
LEFT JOIN PL_EVENT_STAFF_VIEW pesv
ON (pev.EVENT_ID=PESV.EVENT_ID
AND pev.WEEKS=PESV.WEEK_NUM)
WHERE pev.event_id=2520
Thanks
David HillsBTW Oracle outer join operator (+) and ANSI SQL OUTER JOIN syntax are NOT equivalent. Consider following:
DROP TABLE T1;
CREATE TABLE T1 (C1 NUMBER);
DROP TABLE T2;
CREATE TABLE T2 (C2 NUMBER);
DROP TABLE T3;
CREATE TABLE T3 (C3 NUMBER);
-- Following SELECT works:
SELECT COUNT(*)
FROM T1, T2, T3
WHERE C2 = C1
AND C3(+) = C1
COUNT(*)
0
-- But:
SELECT COUNT(*)
FROM T1, T2, T3
WHERE C2 = C1
AND C3(+) = C1
AND C3(+) = C2
AND C3(+) = C1
ERROR at line 4:
ORA-01417: a table may be outer joined to at most one other table
-- However with ANSI syntax:
SELECT COUNT(*)
FROM T1
JOIN T2 ON (C2 = C1)
LEFT JOIN T3 ON (C3 = C1 AND C3 = C2)
COUNT(*)
0 -
Proper syntax for email function including a repeat region
Hey Guys, a fellow ADDT developer and myself ran into a odd challenge recently and was wondering if someone knew a shorter answer.
LET ME BE CLEAR..I’m not looking for a suggestion, we have resolved the problem..we ARE LOOKING FOR PROPER or shortest FORMAT.
(we used a submit redirect to a php page that used the “Send Page Section” and then redirected back..the email looks great)
This may be a mood point since ADDT is going away but, until then, we feel this will be an useful post because quite often you may have multiple products to email from your SQL statement.
With that said. We used the send email function on submit.
1. Our email content was a HTML content file. Since it was not a php file our repeat region obviously did not work.
2. We substituted the HTML file for PHP (just for giggles)..no joy
3. We tried regular content as a string..no joy
We know how to get single rows with the {table.column} format…but we need to list all undetermined number of products/rows.
So how would the string or function re-write look if you needed a repeat region.
EX:
emailContent (“ this” . ‘does’. “work”); regular string
emailContent (“ this” . $var . “work”); regular string
emailContent (“ this” . do{ $row; } while( xxx = xxx) . “work”); DOES NOT WORK
emailContent (“ this” . while( xxx = xxx) { $row; } . “work”); DOES NOT WORK
I assume the conflict is you can’t have a function like DO or While in the string….but I also can’t use a php include file.
There must be a shorter, cleaner syntax that won’t require an advanced set of arrays or for each???
so how would a nice clean example of repeat region results inside email content, or include file for email contnent, look?
ThanksDavid, in theory I agree with you, but to a large degree I am completely changing the logic of my human interface. My existing code pre-processes the raw data and saves the results to disk for any future usage.
It can then rapidly rebuild all pages for the entire Intranet site when your personal view of the data is changed.
After the full creation of all pages, the fixed pages can be viewed using your browser.
When you want to change your view, you run the code which completely rebuilds every Intranet page.
My new software will approach the data differently. My raw data will be stored with no pre-processing. The pre-processing will occur as the user changes dates and the pages will be built individually on demand, one at a time.
The second phase of my Windows Form app will be to create pop-up windows that allow the users to modify the definitions for their custom views of the market.
When a view is changed, the software will be able to pre-process, as needed, the current date’s data and rebuild the current page with any new changes.
I intend to create a Refresh.cpp file. The various segments of the Form’s code will set variable such as date change, view changed, watch list changed, etc. and then call Refresh().
The refresh code will then be able to do the minimum recalculation necessary to rebuild the proper HTML stream.
This is another reason to break up the code into various cpp segments such as: LoadRawData, RecalculateViews, BuildPage, etc.
PS: David, I tried to send you a personal e-mail using your home page link.
Hope that was OK and not against forum rules! -
Oracle UPDATE syntax with JOIN and WHERE clause
I need to update one of my tables, and can't seem to get the syntax right. I've tried a 4 different approaches, but not having any luck. Any help would be greatly appreciated.
Attempt #1: Error: SQL command not properly ended
UPDATE TESTDTA.F4941
SET TESTDTA.F4941.RSDSTN=TESTDTA.F4981.FHRTDQ,TESTDTA.F4941.RSUMD1=TESTDTA.F4981.FHUOM
FROM TESTDTA.F4941
INNER JOIN TESTDTA.F4981
ON TESTDTA.F4941.RSSHPN = TESTDTA.F4981.FHSHPN
WHERE TESTDTA.F4941.RSSHPN = 647143
AND TESTDTA.F4941.RSDSTN = 0
AND TESTDTA.F4941.RSADDJ > 110365
AND TESTDTA.F4981.FHCGC1 = 'DIS';
Attempt #2: Error report: SQL Error: ORA-00904: "TESTDTA"."F4981"."FHUOM": invalid identifier 00904. 00000 - "%s: invalid identifier"
UPDATE (SELECT TESTDTA.F4941
FROM TESTDTA.F4941
INNER JOIN TESTDTA.F4981
ON TESTDTA.F4941.RSSHPN = TESTDTA.F4981.FHSHPN
WHERE TESTDTA.F4941.RSSHPN = 647143
AND TESTDTA.F4941.RSDSTN = 0
AND TESTDTA.F4941.RSADDJ > 110365
AND TESTDTA.F4981.FHCGC1 = 'DIS')
SET TESTDTA.F4941.RSDSTN=TESTDTA.F4981.FHRTDQ,TESTDTA.F4941.RSUMD1=TESTDTA.F4981.FHUOM
Attempt #3: Error report: SQL Error: ORA-00904: "TESTDTA"."F4941": invalid identifier 00904. 00000 - "%s: invalid identifier"
UPDATE (SELECT *
FROM TESTDTA.F4941
INNER JOIN TESTDTA.F4981
ON TESTDTA.F4941.RSSHPN = TESTDTA.F4981.FHSHPN
WHERE TESTDTA.F4941.RSSHPN = 647143
AND TESTDTA.F4941.RSDSTN = 0
AND TESTDTA.F4941.RSADDJ > 110365
AND TESTDTA.F4981.FHCGC1 = 'DIS')
SET TESTDTA.F4941.RSDSTN=TESTDTA.F4981.FHRTDQ,TESTDTA.F4941.RSUMD1=TESTDTA.F4981.FHUOM;
Attempt #4: Error: ORA-00925: missing INTO keyword 00925. 00000 - "missing INTO keyword"
MERGE TESTDTA.F4941
USING TESTDTA.F4981
ON (TESTDTA.F4941.RSSHPN = TESTDTA.F4981.FHSHPN
AND TESTDTA.F4941.RSSHPN = 647143
AND TESTDTA.F4941.RSDSTN = 0
AND TESTDTA.F4941.RSADDJ > 110365
AND TESTDTA.F4981.FHCGC1 = 'DIS'
WHEN MATCHED THEN
UPDATE SET TESTDTA.F4941.RSDSTN=TESTDTA.F4981.FHRTDQ
,TESTDTA.F4941.RSUMD1=TESTDTA.F4981.FHUOM;thank you for the attempt, but I get this error trying your method...
Error report:
SQL Error: ORA-01779: cannot modify a column which maps to a non key-preserved table
01779. 00000 - "cannot modify a column which maps to a non key-preserved table"
*Cause: An attempt was made to insert or update columns of a join view which
map to a non-key-preserved table.
*Action: Modify the underlying base tables directly.
as for the background of what I'm trying to...
I have 2 tables, one that has shipments with no miles (F4941 / Routing Steps), and another that does have miles (F4981 / Freight Audit History).
I want to update the miles & UnitOfMeasure columns for all shipments in the F4941 that currently have 0 miles with the miles found in the F4981 which are connected by Shipment number. Here's my same script, with simpler naming.
UPDATE RoutingSteps
SET RoutingSteps.Miles=FreightAuditHistory.Miles,RoutingSteps.UnitOfMeasure=FreightAuditHistory.UnitOfMeasure
FROM RoutingSteps
INNER JOIN FreightAuditHistory
ON RoutingSteps.ShipmentNumber = FreightAuditHistory.ShipmentNumber
WHERE RoutingSteps.ShipmentNumber = 647143
AND RoutingSteps.Miles = 0
AND RoutingSteps.ShipmentDate > 110365
AND FreightAuditHistory.Category = 'DIS';
hope this helps visualize my intent -
Handling Outer Join for hard coded values in the Logical Table Source
Has anyone tried to apply an outer join in the Logical Table Source Content Tab?
I have to add this APPLSYS.FND_LOOKUP_VALUES.LANGUAGE (+)= 'US' but the outer join is not allowed. I get this message.... [nQSError: 27002] Near <(>: Syntax error [nQSError: 26012] .
Could you tell me please how this should be handled? I have a lot of this cases in my project and without this being set-up affects the expected output of my report.
Thank you in advance.hi Ap,
Pull only Dim_W_LOV_D_Acty_Src column into answers and check whether u r able to see CUST_SRC_ACT or not .Of course, you need to check sql query too
Thanks,
Saichand.v -
Datawindow graphical syntax outer join BUG
Ok, so this is a bug report. I don't know where i'm supposed to post it for SAP (i do have support).
The outer join syntax is ansi.
Using the graphical SQL designer, outer joins are incorrectly written by powerbuilder. This has been going on ever since ANSI style outer join sytax was added (PB 9?).
I think it has to do with the datawindow's use of both right and outer joins and its lack of use of inner joins. The end result is that we have to rewrite a lot of stuff in sql since powerbuilder is generating bad sql.
The typical example is the use of 2 or more outer joins where the joins are being done using 2 or more columns.
PB will create both a LEFT and a RIGHT outer join by duplicating the table name. The table (receive) is only selected ONCE in the sql graphical designer.
And this is the result:
Microsoft SQL Native Client
The objects "receive" and "receive" in the FROM clause have the same exposed names. Use correlation names to distinguish them.
Do you want to correct errors?
I would love to see the datawindow sql corrected and written in a more standard way.
1 change the OUTER JOIN syntax in the db profile setup to indicate the syntax. not outer join, but syntax. If you select ANSI have it write ALL joins using JOIN ( from ta join tb on ta.col = tb.col) intead of from tablea, tableb where tablea.col = tableb.col
2 - eliminate the use of right outer joins.
At that point i believe that the datawindow could more easily be fixed by SAP to not duplicate tables when in generates the syntax.If you have an Oracle Support agreement you can log a Service Request with Oracle, but they may respond that it is not really a bug. The problem is that the "outer" keyword in your 3rd example is being treated as an alias for TABLE_A because it is not considered a reserved keyword.
with table_a as (
select 1 as id, 'abc' as value_a from dual union all
select 2 as id, 'def' as value_a from dual union all
select 3 as id, 'ghi' as value_a from dual
, table_b as (
select 2 as id, 'jkl' as value_b from dual union all
select 3 as id, 'mno' as value_b from dual union all
select 4 as id, 'pqr' as value_b from dual
select ID, outer.VALUE_A, VALUE_B from TABLE_A outer join TABLE_B using (ID);
ID VALUE_A VALUE_B
2 def jkl
3 ghi mnoIf you query the V$RESERVED_WORDS view it will tell you which keywords are reserved.
select * from V$RESERVED_WORDS where keyword in ('OUTER', 'SELECT','USING');
KEYWORD LENGTH RESERVED RES_TYPE RES_ATTR RES_SEMI DUPLICATE
USING 5 N N N N N
OUTER 5 N N N N N
SELECT 6 Y N N N NYou would get a similar result if you tried
select ID, VALUE_A, VALUE_B from TABLE_A using join TABLE_B using (ID);Regards,
Bob
Maybe you are looking for
-
Report Engine rwEng-0 crashed when server startup
I installed 9ias on RedHat Linux, and applied the latest patches(Core patch 2, NT patch 1, form&report patch 2).But when I start the report server(in-process server). The report server's log shows: ** 2003/5/19 8:51:9:297 -- Reports Server is startin
-
Here's my dilemma. I have a new Mac Mini - a week old. I installed Windows 7 on it using Mac's Bootcamp assistant. I then set up and configured my Windows 7 world and everything worked fine. No issues logging in between Lion or Win7 via the resta
-
Jar and classpath with space in folder name?
Hi, all. Just for fun: what if I have a jar file that is dependant on the other jar file which is placed in folder with space in its name? How would I link it in manifest file? Thanks.
-
Closed Captions in Captivate 5 - location, justification
Tried searching the forums for an answer, but search appears to be broken... Can you center justify the words in closed captions? Or otherwise format the text (bold, etc.)? Aside from buying a widget, is there any way to move/resize the caption bar?
-
Pacman fails to take packages from repository ?
whenever pacman -S pkgname is given for whichever software it says error: failed retrieving file 'subversion-1.7.8-1-i686.pkg.tar.xz' from mirror.us.leaseweb.net : Operation too slow. Less than 1024 bytes/sec transferred the last 10 seconds error: f