Properites Pane with single group of properties (PROP_SET_SINGLE_GROUP)
Hi ,
Does anyone know how to find the property group technical name of certain web item for setting the parameter PROP_SET_SINGLE_GROUP of properties pane?
Thank you,
Jeff
I agree with all of the above! I will just add a couple of additional suggestions:
I would really put some effort in your preference center. Make sure you clearly define your opt-in/opt out strategy and the priority of messages to avoid redundancy and unnecessary overlaps. This may require collaboration with other teams upfront but can save you time and headaches in the long run.
Along with this, your content strategy can benefit from a regular review at a global level to ensure you are still relevant at the division level (which I would assume you already do )
If you have customers who are likely to be member of multiple divisions, I would also make sure to run some filters or have a program that checks your set of rules in order to manage email frequency.
Like Marian suggested, adherence and reinforcement of a solid naming convention for everything will be key.
Cheers!
Similar Messages
-
Stacked bar chart with single group
Post Author: rt50896
CA Forum: Charts and Graphs
Dear all, I have a question about stacked bar chart with one group value(normally more than one group value is ok) ex. YYYYMM PRODUCT AMT -
200601 ABC 1000 200602 ABC 300 200603 ABC 500 ..... the data collection is as above,then chart display: x-axis as YYYYMM,y-axis as PRODUCT... but why this case the bar chart color not the same for each YYYYMM? and legend not display one PRODUCT as ABC only? the bar chart display like this: http://tkfiles.storage.live.com/y1po30C7CH6eW9phoLAXH89MBGwFLYdEZ3kOMQXUQzDzwM-VNnffibEwqPI8TIUNBm1f7uKTjnkaOI ps. crystal report version is 8.5ReginaThanks, Jeff. I did try this but for whatever reason it doesn't make a difference. I think it is because if there's no data for a given series for a certain week, there is no entry in the data set that is sent to AnyChart.
I was able to get around the issue by "filling in" the missing weeks from each data series. To generate the list of "Week Of" dates for a given date range, I used this code:
select
trunc (each_day) as week_of,
0 as effort
from (
select
(to_date(:p920_start_date,:app_date_format) + 2 - to_char(to_date(:p920_start_date,:app_date_format),'D') - 1) + level each_day
from dual
connect by level <= to_date(:p920_end_date,:app_date_format) - to_date(:p920_start_date,:app_date_format) + 1
where
to_char (each_day, 'D') = '2'This creates an effort entry of 0 for each week within the date range; I use the Monday date of a week as the "Week Of" date. I then union this with my actual data and summarize by week and viola, I get the weeks in order. This also has the benefit of showing a week for which there are no entries in any of the three series.
Thanks for taking a look at this.
Mike -
AP Tax Calculation issue with SINGLE TAX vs TAX GROUP
Hi Gurus,
i need your help on below, please advise!!
i have to calculate ap VAT tax on AP invoice,
(Rounding = nearest, precession=2, tax calcualtion= Include tax)
if i calculate 5% is the tax rate, then the tax amount is 0.47cents,this is in case of single tax calculation.
here my requirement was i need calculate 2 Taxes(TAX A AND TAX B (Rates are 5 AND 5%)
EG:
Invoce Base amount = 10 dollars
in case of single tax = 5/105 * 10 = 0.4761 cents(this is 48cents in apps with rouning nearest and precession 2)
tax mode = Include tax
In case of tax group = Tax A and Tax B = 5 + 5 = 10%, when i calculate this in apps its showing 45cents and 45 cents as tax A and B
why this tax caluclation is different with single tax and tax group.
tax code actual amount tax amount remaining amount
single tax 10 0.4761 10 - 0.48cents = 9.52 cents
tax group 10 45+45=90 cents 9.10 cents
Please Help !!!
Thanks,
SatishHi Vineeth,
This is Kathy from BSI Support. I wanted to make sure that you understood that the TF80 Like Reciprocal flag was made available in TF90 for testing purposes only. This was meant as a tool for customers to be able to compare their TF90 results to their TF80 output, to insure a successful upgrade. This funcitonality, however, was never intended to be utilized going forward. There have been significant changes implemented in BSI TaxFactory 9.0 regarding multi-state withholding (also known as reciprocity). There is information available on our website that explains these changes. If you log onto our website, please look under the "Whats New" section for an explanation of reciprocal functionality in BSI TaxFactoryu2122 9.0
If you have specific scenarios that you need help with, please contact us and we will be happy to assist you.
Regards,
BSI Support - Kathy -
How to display single row column with nested group function
SQL> select deptno, Max(sum(sal)) SalSum
2 from emp
3 group by deptno;
select deptno, Max(sum(sal)) SalSum
ERROR at line 1:
ORA-00937: not a single-group group function
Can you please the Help me to get the Max(sum(sal)) with Deptno ......select deptno, sum(sal) SalSum
from emp
group by deptno;The ablove query will give only one value for SALSUM for a department. So there is no meaning on applying MAX on this for a department..
What are you trying to achieve?
This?
select max(salsum) salsm,max(deptno) keep(dense_rank first order by salsum desc) deptno
from(
select deptno, sum(sal) SalSum
from emp
group by deptno);Edited by: jeneesh on Sep 4, 2012 6:00 PM -
Issue with not a single-group group function error
Hello PL/SQL Gurus,
I am using Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production version and
Once I am using the following query –
SELECT s.sym,
t.tag_trade_method trade_method,
astd.tag_trade_sector,
iss.gics_sector_dsc sector,
d.date_dt trade_date,
c.wmc_curcy_cd_alpha curcycode,
amd.brkr_nm,
SUM(atdf.notional_amt) trd_notional,
SUM(atdf.trd_qty) trd_qty,
ard.buy_sell_ind,
td.person_init
FROM alloc_tran_det_fact atdf,
date_dim d,
alloc_trade_tag_dim t,
security_dim s,
currency_dim c,
person_dim td,
access_method_dim amd,
alloc_sec_tag_dim astd,
alloc_ref_dim ard,
issuer_dim iss
where atdf.alloc_trd_tag_dim_key = t.alloc_trade_tag_dim_key AND
atdf.alloc_sec_tag_dim_key = astd.alloc_sec_tag_dim_key AND
ard.alloc_ref_dim_key = atdf.alloc_ref_dim_key AND
atdf.isr_dim_key = iss.isr_dim_key AND
atdf.trd_dt_key = d.date_dim_key AND
atdf.sec_dim_key = s.sec_dim_key AND
t.tag_valid_trade_flg = 'Y' AND
atdf.locl_curcy_flg = 'Y' AND
d.date_dim_key BETWEEN 20120405 AND 20120405 AND
c.curcy_dim_key = atdf.curcy_dim_key AND
td.person_dim_key = atdf.trdr_dim_key AND
atdf.exec_brkr_dim_key = amd.access_method_dim_key AND
amd.level_cd = 'B'
and t.tag_trade_method in('ALGO','CAPITAL','DMA','NATURAL','WORKING')
then it throw the error –
ORA-00937: not a single-group group function
If I am using something like –
SELECT s.sym,
t.tag_trade_method trade_method,
astd.tag_trade_sector,
iss.gics_sector_dsc sector,
d.date_dt trade_date,
c.wmc_curcy_cd_alpha curcycode,
amd.brkr_nm,
SUM(atdf.notional_amt) trd_notional,
SUM(atdf.trd_qty) trd_qty,
td.person_init
FROM alloc_tran_det_fact atdf,
date_dim d,
alloc_trade_tag_dim t,
security_dim s,
currency_dim c,
person_dim td,
access_method_dim amd,
alloc_sec_tag_dim astd,
issuer_dim iss
WHERE atdf.alloc_trd_tag_dim_key = t.alloc_trade_tag_dim_key AND
atdf.alloc_sec_tag_dim_key = astd.alloc_sec_tag_dim_key AND
atdf.isr_dim_key = iss.isr_dim_key AND
atdf.trd_dt_key = d.date_dim_key AND
atdf.sec_dim_key = s.sec_dim_key AND
t.tag_valid_trade_flg = 'Y' AND
atdf.locl_curcy_flg = 'Y' AND
d.date_dim_key BETWEEN 20120102 AND 20120401 AND
c.curcy_dim_key = atdf.curcy_dim_key AND
td.person_dim_key = atdf.trdr_dim_key AND
atdf.exec_brkr_dim_key = amd.access_method_dim_key AND
amd.level_cd = 'B'
and t.tag_trade_method in('ALGO','CAPITAL','DMA','NATURAL','WORKING')
GROUP BY t.tag_trade_method,
d.date_dt,
c.wmc_curcy_cd_alpha,
td.person_init,
amd.brkr_nm,
astd.tag_trade_sector,
iss.gics_sector_dsc
then it works fine. I know that due to aggeregate functions we need to use Group By, but why to put Group By on different non aggregate columns,
As my intension is to fetch the records for defined date range Group By Symbol (s.sym), Kindly help me with this.
Thanks to all of you in advance for providing you valuable time and efforts.
Edited by: user555994 on May 11, 2012 2:20 AMYou do need to group by these columns
t.tag_trade_method,
d.date_dt,
c.wmc_curcy_cd_alpha,
td.person_init,
amd.brkr_nm,
astd.tag_trade_sector,
iss.gics_sector_dsc
as they don't have aggregate functions applied to them. -
SIP Trunk - No voice with Single Number Reach
Hi Community.
I setup SIP Trunk with the CCA. Everything is working Call In and Call Out. Call Forward and so on.
But with Single Number reach is something wrong. The mobile phone is ringing and I can get the call, but I hear not any voice.
Can someone please help me out? Below the config.
version 15.1
parser config cache interface
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
service compress-config
service sequence-numbers
dot11 ssid cisco-data
vlan 1
authentication open
dot11 ssid cisco-voice
vlan 100
authentication open
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.9
ip dhcp excluded-address 10.1.1.241 10.1.1.255
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
ip domain name site1.365873.trk.ipvoip.ch
ip name-server 8.8.8.8
ip inspect WAAS flush-timeout 10
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
isdn switch-type basic-net3
voice call send-alert
voice rtp send-recv
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip refer
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
sip
registrar server expires max 3600 min 3600
localhost dns:site1.365873.trk.ipvoip.ch
no update-callerid
voice class codec 1
codec preference 1 g711alaw
voice register global
mode cme
source-address 10.1.1.1 port 5060
load 9971 sip9971.9-2-2
load 9951 sip9951.9-2-2
load 8961 sip8961.9-2-2
timezone 23
voice source-group CCA_SIP_SOURCE_GROUP_CUE_CME
access-list 2
translation-profile incoming SIP_Incoming
voice source-group CCA_SIP_SOURCE_GROUP_EXTERNAL
access-list 3
voice translation-rule 9
rule 1 /0041449475090/ /90/
rule 2 /0041449475091/ /91/
rule 3 /0041449475092/ /92/
rule 4 /0041449475093/ /93/
rule 5 /0041449475094/ /94/
rule 6 /0041449475095/ /95/
rule 7 /0041449475096/ /96/
rule 8 /0041449475097/ /97/
rule 9 /0041449475098/ /98/
rule 10 /0041449475099/ /99/
voice translation-rule 410
rule 1 /^0\(.*\)/ /\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 411
rule 1 /^0\(.*\)/ /ABCD0\1/
voice translation-rule 412
rule 1 /^ABCD\(.*\)/ /\1/
voice translation-rule 422
rule 15 /^ABCD\(.*\)/ /\1/
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1111
rule 1 /^9\([1-9]\)$/ /004144947509\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 1112
rule 1 /^0/ //
voice translation-rule 2000
rule 1 /0041449475098/ /98/
voice translation-rule 2001
rule 1 /0041449475097/ /97/
voice translation-rule 2002
rule 1 /^6/ //
voice translation-rule 2222
voice translation-profile AA_Profile
translate called 2001
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PSTN_CallForwarding
translate redirect-target 410
translate redirect-called 410
voice translation-profile PSTN_Outgoing
translate calling 1111
translate called 1112
translate redirect-target 410
translate redirect-called 410
voice translation-profile SIP_Called_9
translate calling 3265
translate called 9
voice translation-profile SIP_Incoming
translate called 411
voice translation-profile SIP_Passthrough
translate called 412
voice translation-profile SIP_Passthrough_CallBlocking
translate called 422
voice translation-profile VM_Profile
translate called 2000
voice translation-profile XFER_TO_VM_PROFILE
translate redirect-called 2002
voice translation-profile nondialable
translate called 1000
voice-card 0
dspfarm
dsp services dspfarm
fax interface-type fax-mail
license udi pid UC540W-BRI-K9 sn FGL163220SL
archive
log config
logging enable
logging size 600
hidekeys
username admin privilege 15 secret xxx
username xxx password 0 ""
username xxx password 0 ""
ip tftp source-interface Loopback0
bridge irb
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/0
description $FW_OUTSIDE$
no ip address
ip inspect SDM_LOW out
ip virtual-reassembly in
ip verify unicast reverse-path
load-interval 30
shutdown
duplex auto
speed auto
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
no ip address
macro description cisco-desktop
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
no ip address
macro description cisco-desktop
spanning-tree portfast
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface BRI0/1/1
no ip address
shutdown
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface Dot11Radio0/5/0
no ip address
ssid cisco-data
ssid cisco-voice
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
antenna receive right
antenna transmit right
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
interface BVI1
description $FW_INSIDE$
ip address 192.168.10.2 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly in
interface BVI100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 192.168.10.1
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 2 remark CCA_SIP_SOURCE_GROUP_ACL_INTERNAL
access-list 2 remark SDM_ACL Category=1
access-list 2 permit 192.168.10.2
access-list 2 permit 10.1.10.0 0.0.0.3
access-list 2 permit 192.168.10.0 0.0.0.255
access-list 2 permit 10.1.1.0 0.0.0.255
access-list 3 remark CCA_SIP_SOURCE_GROUP_ACL_EXTERNAL
access-list 3 remark SDM_ACL Category=1
access-list 3 permit 212.147.47.216
access-list 3 deny any
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 deny ip 192.168.10.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit tcp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 deny ip 10.1.1.0 0.0.0.255 any
access-list 101 deny ip 192.168.10.0 0.0.0.255 any
access-list 101 deny ip 192.168.1.0 0.0.0.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 102 remark SDM_ACL Category=1
access-list 102 deny ip 10.1.10.0 0.0.0.3 any
access-list 102 deny ip 10.1.1.0 0.0.0.255 any
access-list 102 deny ip 192.168.1.0 0.0.0.255 any
access-list 102 deny ip host 255.255.255.255 any
access-list 102 deny ip 127.0.0.0 0.255.255.255 any
access-list 102 permit ip any any
access-list 103 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 103 remark SDM_ACL Category=1
access-list 103 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 permit udp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 deny ip 10.1.10.0 0.0.0.3 any
access-list 103 deny ip 192.168.10.0 0.0.0.255 any
access-list 103 deny ip 192.168.1.0 0.0.0.255 any
access-list 103 deny ip host 255.255.255.255 any
access-list 103 deny ip 127.0.0.0 0.255.255.255 any
access-list 103 permit ip any any
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_14##
access-list 104 remark SDM_ACL Category=1
access-list 104 deny ip 10.1.10.0 0.0.0.3 any
access-list 104 deny ip 10.1.1.0 0.0.0.255 any
access-list 104 permit ip any any
access-list 104 permit udp host 8.8.8.8 eq domain any
access-list 104 permit icmp any any echo-reply
access-list 104 permit icmp any any time-exceeded
access-list 104 permit icmp any any unreachable
access-list 104 deny ip 10.0.0.0 0.255.255.255 any
access-list 104 deny ip 172.16.0.0 0.15.255.255 any
access-list 104 deny ip 192.168.0.0 0.0.255.255 any
access-list 104 deny ip 127.0.0.0 0.255.255.255 any
access-list 104 deny ip host 255.255.255.255 any
access-list 104 deny ip host 0.0.0.0 any
access-list 104 deny ip any any
control-plane
bridge 1 route ip
bridge 100 route ip
voice-port 0/0/0
cptone CH
station-id name FAX
station-id number 99
caller-id enable
voice-port 0/0/1
cptone CH
shutdown
caller-id enable
voice-port 0/0/2
cptone CH
shutdown
caller-id enable
voice-port 0/0/3
cptone CH
shutdown
caller-id enable
voice-port 0/1/0
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/1/1
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 4.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register mtpa4934c6ee4e0
dspfarm profile 2 transcode
description CCA transcoding for SIP Trunk VTX
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 10
associate application SCCP
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
destination-pattern 99
port 0/0/0
no sip-register
dial-peer voice 2 pots
port 0/0/1
no sip-register
dial-peer voice 3 pots
port 0/0/2
no sip-register
dial-peer voice 4 pots
port 0/0/3
no sip-register
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 6 pots
description tcatch all dial peer for BRI/PRIv
translation-profile incoming nondialable
incoming called-number .%
direct-inward-dial
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/1
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 98
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 97
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2012 voip
description ** cue prompt manager number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 96
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1000 voip
permission term
description ** Incoming call from SIP trunk (VTX) **
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1001 voip
corlist outgoing call-local
description ** star code to SIP trunk (VTX) **
destination-pattern *..
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1003 voip
description ** Passthrough Inbound Calls for PSTN from CUE **
translation-profile incoming SIP_Passthrough
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ABCDT
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1005 voip
description ** Passthrough Inbound Calls for MWI from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number A80T
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1009 voip
description ** Passthrough Inbound Calls for Internal Extensions from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ^..$
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1033 voip
corlist outgoing call-local
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0187
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1042 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1041 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1025 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[789]1.......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1020 voip
corlist outgoing call-national
description **CCA*Switzerland*Regional Announcement VM**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01600
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1040 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 000333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1043 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1035 voip
corlist outgoing call-national
description **CCA*Switzerland*Mobile Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 007[46789].......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1024 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Personal Numbering**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00878......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1029 voip
corlist outgoing call-national
description **CCA*Switzerland*Voicemail Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00860.........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1036 voip
corlist outgoing call-national
description **CCA*Switzerland*VPN Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00869.............
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1027 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Premium Rate (Business)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00900......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1026 voip
corlist outgoing call-national
description **CCA*Switzerland*Test Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00868T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1034 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Shared Cost numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0084[0248]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1038 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1037 voip
corlist outgoing call-toll-free
description **CCA*Switzerland*Toll Free Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00800......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1039 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1032 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[23456]........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1023 voip
corlist outgoing call-international
description **CCA*Switzerland*International Calls**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 000T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1031 voip
description **CCA*Switzerland*Premium Rate (Social)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0090[16]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1030 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 014[0357]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1045 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1028 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Directory Enquiries**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 018[15].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1021 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 011[45].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1022 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01[67].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1044 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 2002 voip
description ** cue voicemail PSTN number **
translation-profile outgoing VM_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2003 voip
description ** cue auto attendant PSTN number **
translation-profile outgoing AA_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1110 pots
preference 9
destination-pattern xxx
port 0/0/0
no sip-register
dial-peer voice 3006 voip
description SIP
translation-profile incoming SIP_Called_9
session protocol sipv2
session target sip-server
incoming called-number xxx.
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
no dial-peer outbound status-check pots
sip-ua
keepalive target dns:site1.365873.trk.ipvoip.ch
authentication username xxx password 7 xxx
no remote-party-id
retry invite 2
retry register 10
timers connect 100
timers keepalive active 100
registrar dns:site1.365873.trk.ipvoip.ch expires 3600
sip-server dns:site1.365873.trk.ipvoip.ch
host-registrar
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 10
sdspfarm tag 2 mtpa4934c6ee4e0
video
fxo hook-flash
max-ephones 40
max-dn 300
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service phone ehookEnable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message SwissT.Net
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 521G-524G cp524g-8-1-17
load 525G spa525g-7-5-4
load 501G spa50x-30x-7-5-2b
load 502G spa50x-30x-7-5-2b
load 504G spa50x-30x-7-5-2b
load 508G spa50x-30x-7-5-2b
load 509G spa50x-30x-7-5-2b
load 525G2 spa525g-7-5-4
load 301 spa50x-30x-7-5-2b
load 303 spa50x-30x-7-5-2b
time-zone 23
time-format 24
date-format dd-mm-yy
keepalive 30 auxiliary 4
voicemail 98
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
hunt-group logout HLog
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 xxx
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
night-service day Sun 17:00 09:00
night-service day Mon 17:00 09:00
night-service day Tue 17:00 09:00
night-service day Wed 17:00 09:00
night-service day Thu 17:00 09:00
night-service day Fri 17:00 09:00
night-service day Sat 17:00 09:00
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
service phone webAccess 0
softkeys remote-in-use Newcall
softkeys idle Redial Pickup Mobility Newcall Cfwdall Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer Mobility TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 17
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 18
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 292
number xxx
description SIP Main Number registration
preference 10
ephone-dn 293 dual-line
number 90 secondary xxx no-reg both
label Zentrale
description 90
name Zentrale
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 294 dual-line
number 94 secondary xxx no-reg both
label LL
description Lehrling Lehrnende
name Lehrling Lehrnende
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 295 dual-line
number 93 secondary xxx no-reg both
label CM
description
name
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 296 dual-line
number 92 secondary xxx no-reg both
label EE
description
name
mobility
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 297 dual-line
number 91 secondary xxx no-reg both
label RS
description
name
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 298
number 6.. no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 98
ephone-dn 299
number A801.. no-reg primary
mwi off
ephone-dn 300
number A800.. no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address A44C.11A0.B648
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:296 2:293 3m297 4m295
button 5m294
ephone 2
device-security-mode none
mac-address A44C.11A0.B566
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:297 2:293 3m296 4m295
button 5m294
ephone 3
device-security-mode none
mac-address A44C.11A0.B5C4
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:295 2:293 3m297 4m296
button 5m294
ephone 4
device-security-mode none
mac-address A44C.11A0.B67A
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:294 2:293 3m297 4m296
button 5m295
alias exec cca_voice_mode PBX
alias exec cca_vm_notification schedule from_time=00 to_time=24
alias exec clid-ALL_BRI ;1:0-4;1:0-9;1:0-9;1:1-9
alias exec clid-SIP ;1:1-9;1:1-9;1:1-9
banner login ^CCisco Configuration Assistant. Version: 3.2 (3). Fri Jul 04 13:18:33 CEST 2014^C
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
transport preferred none
transport input all
line vty 5 100
transport preferred none
transport input all
ntp master
ntp server 91.240.0.5 prefer
enHi Patrick
I am working on this one as well. I have a UC560 with SIP Trunk provider Les.NET.
It was working fine until a few weeks ago when something changed on the provider end and broke it. My hunch it is something to do with the SIP REFER.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/91535-cme-sip-trunking-config.html
Here is an excerpt from the above page:
Call Transfer
When a call comes in on an SIP trunk to an SCCP Phone or CUE AutoAttendant (AA) and is transferred, the CME by default will send a SIP REFER message to the SP proxy. Most SP Proxy Servers do not support the REFER method. This needs to be configured in order to force the CME to hairpin the call:
Router(config)#voice service voip
Router(conf-voi-serv)#no supplementary-service sip refer
Figure 3 shows the behavior of the CME system with the REFER method disabled. -
Problem with checkbox group in row popin of table.
In table row popin I have kept Check Box Group.I have mapped the texts property of checkbox group to the attribute which is under the subnode of the table.the subnode properties singleton=false,selectioncardinality=0-n,and cardinality=0-n.
if there are 'n' number of records in the table.each record will have its own row popin and in the row popin there is check box group.
the check box group in the row popin belongs to that perticular row.
but the checkboxegroup values in row popins of all the rows are getting changed to the row which is lead selected.
The same scenario (table in the row popin is showing the values corresponding to its perticular row and all the table values in popin are not getting changed to the one lead selected in the main table)is working fine with the table in place of checkbox group in row popin with datasource property of table binded to the subnode
I cant trace out the problem with checkbox group in place of table.
Please help me in this regard.I have to place check box group in place of table in row popin.
Thanks and Regards
Kiran Kumar KI have done the same thing successfully with normal check box ui element. Try using check box in your tabel cell editor instead of check box group.
-
How can I get out on a single group message
I am in a group text message with 10 people and I only have contact information for one of them. I do probably know everyone in the group but as I said I don't have information for pretty much any of them, which makes it super annoying since I have no idea who is saying what. Also with a group of this size, I get bonbarded with like 15+ messages in like a five minute period. I got added to this group two days ago and I have already received at 100 messages in this group, which is especially annoying when I am at work or this morning when I was sleeping.
I have an iPhone 5, and I really do not want to go in and disable all of the group message features, because I have several with my family and would to still be able to use those. Please tell me that there is a way to get out of a single group message. Thanks for the help.There is, currently, no way to get out of a group iMessage other than asking the person who started such to remove you, or:
Show up at their house with two enforcers & "politely" ask that you be removed . -
"median count" in a single group by query
Hallo following problem:
i use a single group by query to analyze a data table.
like "select avg(parameter1), sum(parameter2), count(case when...end) from datatable where ....".
Following problem: I want a median of a count without rewriting the query completely, accessing the table several times or something.
Easy example - in Detail:
Create table and fill with example data
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> CREATE TABLE datatable
2 (
3 SLOT NUMBER
4 , DATA NUMBER
5 );
Table created.
SQL> INSERT INTO datatable VALUES (1,1);
1 row created.
SQL> INSERT INTO datatable VALUES (1,2);
1 row created.
SQL> INSERT INTO datatable VALUES (1,3);
1 row created.
SQL> INSERT INTO datatable VALUES (1,4);
1 row created.
SQL> INSERT INTO datatable VALUES (1,5);
1 row created.
SQL> INSERT INTO datatable VALUES (2,1);
1 row created.
SQL> INSERT INTO datatable VALUES (3,1);
1 row created.
SQL> INSERT INTO datatable VALUES (3,2);
1 row created.
SQL> INSERT INTO datatable VALUES (3,3);
1 row created.
SQL> INSERT INTO datatable VALUES (3,4);
1 row created.
SQL> INSERT INTO datatable VALUES (3,5);
1 row created.
SQL> INSERT INTO datatable VALUES (4,1);
1 row created.
SQL> INSERT INTO datatable VALUES (4,2);
1 row created.
SQL> INSERT INTO datatable VALUES (4,3);
1 row created.
SQL> INSERT INTO datatable VALUES (4,4);
1 row created.
SQL> INSERT INTO datatable VALUES (4,5);
1 row created.
SQL> INSERT INTO datatable VALUES (5,1);
1 row created.
SQL> INSERT INTO datatable VALUES (5,2);
1 row created.
SQL> INSERT INTO datatable VALUES (5,3);
1 row created.
SQL> INSERT INTO datatable VALUES (5,4);
1 row created.
SQL> INSERT INTO datatable VALUES (5,5);
1 row created.In the table there are several items (here slots) with a for each slot unique data-value.
I want to have the median count of data values, to filter out slots with more or less values.
this worked, until there where only slots with less data:
SQL> SELECT FLOOR(COUNT(DISTINCT SLOT||DATA)/COUNT(DISTINCT DATA)) FROM datatabl
e;
FLOOR(COUNT(DISTINCTSLOT||DATA)/COUNT(DISTINCTDATA))
4but when there is a slot having more data - it won't work, the very simple and stupid calculation will give a too little value
SQL>
SQL> INSERT INTO datatable VALUES (4,6);
1 row created.
SQL>
SQL> SELECT FLOOR(COUNT(DISTINCT SLOT||DATA)/COUNT(DISTINCT DATA)) FROM datatabl
e;
FLOOR(COUNT(DISTINCTSLOT||DATA)/COUNT(DISTINCTDATA))
3so what i would need is this:
SQL>
SQL> SELECT MEDIAN(count(DISTINCT SLOT) over (partition by DATA)) FROM datatable
SELECT MEDIAN(count(DISTINCT SLOT) over (partition by DATA)) FROM datatable
ERROR at line 1:
ORA-30483: window functions are not allowed hereIn detail:
the count delivers the distinct count of slots for each data (possible duplicated entrys should not be counted)
And I want the median, which should be 4.
SQL> SELECT count(DISTINCT SLOT) over (partition by DATA) FROM datatable;
COUNT(DISTINCTSLOT)OVER(PARTITIONBYDATA)
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
COUNT(DISTINCTSLOT)OVER(PARTITIONBYDATA)
1
22 rows selected.Is it -anyhow- possible to do this without rebuilding the whole query?
Thanks a lotok, an example:
CREATE TABLE "DATATABLE"
( "TOOL" CHAR(5 BYTE),
"SLOT" NUMBER,
"LOTID" CHAR(4 BYTE),
"STEP" VARCHAR2(44 BYTE),
"ENDTIME" DATE,
"PARAMETER1" NUMBER,
"PARAMETER6" NUMBER
Insert into DATATABLE values ('TOOL1',-1,'LOT1','STEP1',to_timestamp('02-FEB-12 03.09.42 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',-1,'LOT1','STEP2',to_timestamp('02-FEB-12 03.18.47 PM','DD-MON-RR HH.MI.SS AM'),42,0);
Insert into DATATABLE values ('TOOL1',-1,'LOT1','STEP3',to_timestamp('02-FEB-12 03.09.44 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',-1,'LOT1','STEP4',to_timestamp('02-FEB-12 02.20.38 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',-1,'LOT1','STEP5',to_timestamp('02-FEB-12 02.20.35 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',1,'LOT1','STEP1',to_timestamp('02-FEB-12 01.51.28 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',1,'LOT1','STEP2',to_timestamp('02-FEB-12 01.52.40 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',1,'LOT1','STEP3',to_timestamp('02-FEB-12 01.54.20 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',1,'LOT1','STEP4',to_timestamp('02-FEB-12 01.55.32 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',1,'LOT1','STEP5',to_timestamp('02-FEB-12 01.56.36 PM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',2,'LOT1','STEP1',to_timestamp('02-FEB-12 01.52.41 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',3,'LOT1','STEP1',to_timestamp('02-FEB-12 02.00.29 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',3,'LOT1','STEP2',to_timestamp('02-FEB-12 02.01.43 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',3,'LOT1','STEP3',to_timestamp('02-FEB-12 02.03.23 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',3,'LOT1','STEP4',to_timestamp('02-FEB-12 02.04.34 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',3,'LOT1','STEP5',to_timestamp('02-FEB-12 02.05.40 PM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',4,'LOT1','STEP1',to_timestamp('02-FEB-12 02.02.11 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',4,'LOT1','STEP2',to_timestamp('02-FEB-12 02.03.26 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',4,'LOT1','STEP3',to_timestamp('02-FEB-12 02.05.07 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',4,'LOT1','STEP4',to_timestamp('02-FEB-12 02.06.19 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',4,'LOT1','STEP5',to_timestamp('02-FEB-12 02.07.27 PM','DD-MON-RR HH.MI.SS AM'),20,0);
Insert into DATATABLE values ('TOOL1',5,'LOT1','STEP1',to_timestamp('02-FEB-12 02.03.54 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',5,'LOT1','STEP2',to_timestamp('02-FEB-12 02.05.08 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',5,'LOT1','STEP3',to_timestamp('02-FEB-12 02.06.49 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',5,'LOT1','STEP4',to_timestamp('02-FEB-12 02.08.01 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',5,'LOT1','STEP5',to_timestamp('02-FEB-12 02.14.26 PM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',6,'LOT1','STEP1',to_timestamp('02-FEB-12 02.05.35 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',6,'LOT1','STEP2',to_timestamp('02-FEB-12 02.06.50 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',6,'LOT1','STEP3',to_timestamp('02-FEB-12 02.15.14 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',6,'LOT1','STEP4',to_timestamp('02-FEB-12 02.16.26 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',6,'LOT1','STEP5',to_timestamp('02-FEB-12 02.17.31 PM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',7,'LOT1','STEP1',to_timestamp('02-FEB-12 02.06.42 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',8,'LOT1','STEP1',to_timestamp('02-FEB-12 02.14.14 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',8,'LOT1','STEP2',to_timestamp('02-FEB-12 02.15.29 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',8,'LOT1','STEP3',to_timestamp('02-FEB-12 02.17.09 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',8,'LOT1','STEP4',to_timestamp('02-FEB-12 02.18.22 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',8,'LOT1','STEP5',to_timestamp('02-FEB-12 02.23.31 PM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',9,'LOT1','STEP1',to_timestamp('02-FEB-12 02.58.14 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',9,'LOT1','STEP2',to_timestamp('02-FEB-12 02.15.32 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',9,'LOT1','STEP3',to_timestamp('02-FEB-12 02.59.30 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',9,'LOT1','STEP4',to_timestamp('02-FEB-12 03.01.15 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',9,'LOT1','STEP5',to_timestamp('02-FEB-12 03.07.52 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',10,'LOT1','STEP1',to_timestamp('02-FEB-12 02.23.20 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',10,'LOT1','STEP2',to_timestamp('02-FEB-12 02.24.39 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',10,'LOT1','STEP3',to_timestamp('02-FEB-12 02.26.19 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',10,'LOT1','STEP4',to_timestamp('02-FEB-12 02.27.30 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',10,'LOT1','STEP5',to_timestamp('02-FEB-12 02.28.34 PM','DD-MON-RR HH.MI.SS AM'),17,0);
Insert into DATATABLE values ('TOOL1',11,'LOT1','STEP1',to_timestamp('02-FEB-12 02.59.37 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',11,'LOT1','STEP2',to_timestamp('02-FEB-12 03.10.51 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',11,'LOT1','STEP3',to_timestamp('02-FEB-12 02.24.52 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',11,'LOT1','STEP4',to_timestamp('02-FEB-12 03.12.03 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',11,'LOT1','STEP5',to_timestamp('02-FEB-12 03.13.41 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',12,'LOT1','STEP1',to_timestamp('02-FEB-12 02.32.30 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',12,'LOT1','STEP2',to_timestamp('02-FEB-12 02.33.43 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',12,'LOT1','STEP3',to_timestamp('02-FEB-12 02.35.24 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',12,'LOT1','STEP4',to_timestamp('02-FEB-12 02.36.35 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',12,'LOT1','STEP5',to_timestamp('02-FEB-12 02.37.41 PM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',13,'LOT1','STEP1',to_timestamp('02-FEB-12 02.34.11 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',13,'LOT1','STEP2',to_timestamp('02-FEB-12 02.35.26 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',13,'LOT1','STEP3',to_timestamp('02-FEB-12 02.37.06 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',13,'LOT1','STEP4',to_timestamp('02-FEB-12 02.38.19 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',13,'LOT1','STEP5',to_timestamp('02-FEB-12 02.39.29 PM','DD-MON-RR HH.MI.SS AM'),17,0);
Insert into DATATABLE values ('TOOL1',14,'LOT1','STEP1',to_timestamp('02-FEB-12 02.35.54 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',14,'LOT1','STEP2',to_timestamp('02-FEB-12 02.37.08 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',14,'LOT1','STEP3',to_timestamp('02-FEB-12 02.38.48 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',14,'LOT1','STEP4',to_timestamp('02-FEB-12 02.40.01 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',14,'LOT1','STEP5',to_timestamp('02-FEB-12 02.41.13 PM','DD-MON-RR HH.MI.SS AM'),13,0);
Insert into DATATABLE values ('TOOL1',15,'LOT1','STEP1',to_timestamp('02-FEB-12 02.37.37 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',15,'LOT1','STEP2',to_timestamp('02-FEB-12 02.38.52 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',15,'LOT1','STEP3',to_timestamp('02-FEB-12 02.40.33 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',15,'LOT1','STEP4',to_timestamp('02-FEB-12 02.41.46 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',15,'LOT1','STEP5',to_timestamp('02-FEB-12 02.42.58 PM','DD-MON-RR HH.MI.SS AM'),17,0);
Insert into DATATABLE values ('TOOL1',16,'LOT1','STEP1',to_timestamp('02-FEB-12 02.39.20 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',16,'LOT1','STEP2',to_timestamp('02-FEB-12 02.40.34 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',16,'LOT1','STEP3',to_timestamp('02-FEB-12 02.42.16 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',16,'LOT1','STEP4',to_timestamp('02-FEB-12 02.43.29 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',16,'LOT1','STEP5',to_timestamp('02-FEB-12 02.44.42 PM','DD-MON-RR HH.MI.SS AM'),15,0);
Insert into DATATABLE values ('TOOL1',17,'LOT1','STEP1',to_timestamp('02-FEB-12 02.41.04 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',17,'LOT1','STEP2',to_timestamp('02-FEB-12 02.42.19 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',17,'LOT1','STEP3',to_timestamp('02-FEB-12 02.43.59 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',17,'LOT1','STEP4',to_timestamp('02-FEB-12 02.45.13 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',17,'LOT1','STEP5',to_timestamp('02-FEB-12 02.46.26 PM','DD-MON-RR HH.MI.SS AM'),13,0);
Insert into DATATABLE values ('TOOL1',18,'LOT1','STEP1',to_timestamp('02-FEB-12 02.42.49 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',18,'LOT1','STEP2',to_timestamp('02-FEB-12 02.44.03 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',18,'LOT1','STEP3',to_timestamp('02-FEB-12 02.45.44 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',18,'LOT1','STEP4',to_timestamp('02-FEB-12 02.47.01 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',18,'LOT1','STEP5',to_timestamp('02-FEB-12 02.48.10 PM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',19,'LOT1','STEP1',to_timestamp('02-FEB-12 02.44.33 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',19,'LOT1','STEP2',to_timestamp('02-FEB-12 02.45.47 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',19,'LOT1','STEP3',to_timestamp('02-FEB-12 02.47.31 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',19,'LOT1','STEP4',to_timestamp('02-FEB-12 02.48.45 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',19,'LOT1','STEP5',to_timestamp('02-FEB-12 02.49.58 PM','DD-MON-RR HH.MI.SS AM'),14,0);
Insert into DATATABLE values ('TOOL1',20,'LOT1','STEP1',to_timestamp('02-FEB-12 02.46.17 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',20,'LOT1','STEP2',to_timestamp('02-FEB-12 02.47.31 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',20,'LOT1','STEP3',to_timestamp('02-FEB-12 02.49.16 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',20,'LOT1','STEP4',to_timestamp('02-FEB-12 02.50.31 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',20,'LOT1','STEP5',to_timestamp('02-FEB-12 02.51.42 PM','DD-MON-RR HH.MI.SS AM'),14,0);
Insert into DATATABLE values ('TOOL1',21,'LOT1','STEP1',to_timestamp('02-FEB-12 02.48.01 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',21,'LOT1','STEP2',to_timestamp('02-FEB-12 02.49.16 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',21,'LOT1','STEP3',to_timestamp('02-FEB-12 02.51.02 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',21,'LOT1','STEP4',to_timestamp('02-FEB-12 02.52.16 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',21,'LOT1','STEP5',to_timestamp('02-FEB-12 02.55.04 PM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',22,'LOT1','STEP1',to_timestamp('02-FEB-12 02.49.48 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',22,'LOT1','STEP2',to_timestamp('02-FEB-12 02.51.02 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',22,'LOT1','STEP3',to_timestamp('02-FEB-12 02.52.47 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',22,'LOT1','STEP4',to_timestamp('02-FEB-12 02.55.39 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',22,'LOT1','STEP5',to_timestamp('02-FEB-12 02.56.45 PM','DD-MON-RR HH.MI.SS AM'),15,0);
Insert into DATATABLE values ('TOOL1',23,'LOT1','STEP1',to_timestamp('02-FEB-12 02.51.33 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',23,'LOT1','STEP2',to_timestamp('02-FEB-12 02.52.48 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',23,'LOT1','STEP3',to_timestamp('02-FEB-12 02.56.11 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',23,'LOT1','STEP4',to_timestamp('02-FEB-12 02.57.23 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',23,'LOT1','STEP5',to_timestamp('02-FEB-12 02.58.29 PM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',24,'LOT1','STEP1',to_timestamp('02-FEB-12 02.53.18 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',24,'LOT1','STEP2',to_timestamp('02-FEB-12 02.56.00 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',24,'LOT1','STEP3',to_timestamp('02-FEB-12 02.57.53 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',24,'LOT1','STEP4',to_timestamp('02-FEB-12 02.59.05 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',24,'LOT1','STEP5',to_timestamp('02-FEB-12 03.00.12 PM','DD-MON-RR HH.MI.SS AM'),17,0);
Insert into DATATABLE values ('TOOL1',25,'LOT1','STEP1',to_timestamp('02-FEB-12 02.56.29 PM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',25,'LOT1','STEP2',to_timestamp('02-FEB-12 02.57.44 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',25,'LOT1','STEP3',to_timestamp('02-FEB-12 02.59.35 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',25,'LOT1','STEP4',to_timestamp('02-FEB-12 03.00.46 PM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',25,'LOT1','STEP5',to_timestamp('02-FEB-12 03.07.19 PM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',-1,'LOT2','STEP1',to_timestamp('24-FEB-12 03.19.26 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',1,'LOT2','STEP1',to_timestamp('24-FEB-12 03.00.47 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',1,'LOT2','STEP2',to_timestamp('24-FEB-12 03.02.56 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',1,'LOT2','STEP3',to_timestamp('24-FEB-12 03.03.56 AM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',2,'LOT2','STEP1',to_timestamp('24-FEB-12 03.02.22 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',2,'LOT2','STEP2',to_timestamp('24-FEB-12 03.05.06 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',2,'LOT2','STEP3',to_timestamp('24-FEB-12 03.06.06 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',3,'LOT2','STEP1',to_timestamp('24-FEB-12 03.03.56 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',3,'LOT2','STEP2',to_timestamp('24-FEB-12 03.07.15 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',3,'LOT2','STEP3',to_timestamp('24-FEB-12 03.13.53 AM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',4,'LOT2','STEP1',to_timestamp('24-FEB-12 03.05.54 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',4,'LOT2','STEP2',to_timestamp('24-FEB-12 03.15.03 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',4,'LOT2','STEP3',to_timestamp('24-FEB-12 03.16.04 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',5,'LOT2','STEP1',to_timestamp('24-FEB-12 03.05.58 AM','DD-MON-RR HH.MI.SS AM'),0,0);
Insert into DATATABLE values ('TOOL1',5,'LOT2','STEP2',to_timestamp('24-FEB-12 03.25.35 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',5,'LOT2','STEP3',to_timestamp('24-FEB-12 03.29.56 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',5,'LOT2','STEP4',to_timestamp('24-FEB-12 03.30.57 AM','DD-MON-RR HH.MI.SS AM'),16,0);
Insert into DATATABLE values ('TOOL1',6,'LOT2','STEP1',to_timestamp('24-FEB-12 03.14.18 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',6,'LOT2','STEP2',to_timestamp('24-FEB-12 03.17.13 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',6,'LOT2','STEP3',to_timestamp('24-FEB-12 03.19.55 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',7,'LOT2','STEP1',to_timestamp('24-FEB-12 03.15.51 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',7,'LOT2','STEP2',to_timestamp('24-FEB-12 03.21.18 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',7,'LOT2','STEP3',to_timestamp('24-FEB-12 03.22.19 AM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',8,'LOT2','STEP1',to_timestamp('24-FEB-12 03.17.50 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',8,'LOT2','STEP2',to_timestamp('24-FEB-12 03.23.28 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',8,'LOT2','STEP3',to_timestamp('24-FEB-12 03.24.29 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',9,'LOT2','STEP1',to_timestamp('24-FEB-12 03.21.42 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',9,'LOT2','STEP2',to_timestamp('24-FEB-12 03.25.37 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',9,'LOT2','STEP3',to_timestamp('24-FEB-12 03.26.38 AM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',10,'LOT2','STEP1',to_timestamp('24-FEB-12 03.23.25 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',10,'LOT2','STEP2',to_timestamp('24-FEB-12 03.27.47 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',10,'LOT2','STEP3',to_timestamp('24-FEB-12 03.28.47 AM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',11,'LOT2','STEP1',to_timestamp('24-FEB-12 03.27.44 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',11,'LOT2','STEP2',to_timestamp('24-FEB-12 03.32.06 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',11,'LOT2','STEP3',to_timestamp('24-FEB-12 03.33.07 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',12,'LOT2','STEP1',to_timestamp('24-FEB-12 03.29.54 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',12,'LOT2','STEP2',to_timestamp('24-FEB-12 03.34.16 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',12,'LOT2','STEP3',to_timestamp('24-FEB-12 03.35.17 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',13,'LOT2','STEP1',to_timestamp('24-FEB-12 03.32.04 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',13,'LOT2','STEP2',to_timestamp('24-FEB-12 03.36.26 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',13,'LOT2','STEP3',to_timestamp('24-FEB-12 03.37.27 AM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',14,'LOT2','STEP1',to_timestamp('24-FEB-12 03.34.14 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',14,'LOT2','STEP2',to_timestamp('24-FEB-12 03.38.36 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',14,'LOT2','STEP3',to_timestamp('24-FEB-12 03.39.37 AM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',15,'LOT2','STEP1',to_timestamp('24-FEB-12 03.36.24 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',15,'LOT2','STEP2',to_timestamp('24-FEB-12 03.40.46 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',15,'LOT2','STEP3',to_timestamp('24-FEB-12 03.41.46 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',16,'LOT2','STEP1',to_timestamp('24-FEB-12 03.38.34 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',16,'LOT2','STEP2',to_timestamp('24-FEB-12 03.42.55 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',16,'LOT2','STEP3',to_timestamp('24-FEB-12 03.43.56 AM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',17,'LOT2','STEP1',to_timestamp('24-FEB-12 03.40.43 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',17,'LOT2','STEP2',to_timestamp('24-FEB-12 03.45.05 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',17,'LOT2','STEP3',to_timestamp('24-FEB-12 03.46.06 AM','DD-MON-RR HH.MI.SS AM'),17,0);
Insert into DATATABLE values ('TOOL1',18,'LOT2','STEP1',to_timestamp('24-FEB-12 03.42.53 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',18,'LOT2','STEP2',to_timestamp('24-FEB-12 03.47.15 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',18,'LOT2','STEP3',to_timestamp('24-FEB-12 03.48.16 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',19,'LOT2','STEP1',to_timestamp('24-FEB-12 03.45.03 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',19,'LOT2','STEP2',to_timestamp('24-FEB-12 03.49.25 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',19,'LOT2','STEP3',to_timestamp('24-FEB-12 03.50.26 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',20,'LOT2','STEP1',to_timestamp('24-FEB-12 03.47.13 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',20,'LOT2','STEP2',to_timestamp('24-FEB-12 03.51.34 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',20,'LOT2','STEP3',to_timestamp('24-FEB-12 03.52.35 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',21,'LOT2','STEP1',to_timestamp('24-FEB-12 03.49.22 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',21,'LOT2','STEP2',to_timestamp('24-FEB-12 03.53.44 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',21,'LOT2','STEP3',to_timestamp('24-FEB-12 03.54.45 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',22,'LOT2','STEP1',to_timestamp('24-FEB-12 03.51.32 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',22,'LOT2','STEP2',to_timestamp('24-FEB-12 03.55.54 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',22,'LOT2','STEP3',to_timestamp('24-FEB-12 03.56.55 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',23,'LOT2','STEP1',to_timestamp('24-FEB-12 03.53.42 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',23,'LOT2','STEP2',to_timestamp('24-FEB-12 03.58.03 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',23,'LOT2','STEP3',to_timestamp('24-FEB-12 03.59.04 AM','DD-MON-RR HH.MI.SS AM'),19,0);
Insert into DATATABLE values ('TOOL1',24,'LOT2','STEP1',to_timestamp('24-FEB-12 03.55.51 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',24,'LOT2','STEP2',to_timestamp('24-FEB-12 04.00.14 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',24,'LOT2','STEP3',to_timestamp('24-FEB-12 04.01.15 AM','DD-MON-RR HH.MI.SS AM'),18,0);
Insert into DATATABLE values ('TOOL1',25,'LOT2','STEP1',to_timestamp('24-FEB-12 03.58.01 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',25,'LOT2','STEP2',to_timestamp('24-FEB-12 04.02.23 AM','DD-MON-RR HH.MI.SS AM'),1,0);
Insert into DATATABLE values ('TOOL1',25,'LOT2','STEP3',to_timestamp('24-FEB-12 04.03.24 AM','DD-MON-RR HH.MI.SS AM'),18,0);(code generated by sqldeveloper)
In the example:
LOT1 has two slot, with only 1 step instead of 5 --> these slots should not be counted --> result 23
LOT2 has one slot, with 4 instead of 3 --> this slot is ok and should be counted --> result 25
as previously mentioned, i want to count all slots, which got at least the median amount of steps [edit: slot -1 should also not be counted]
LOT1:
SELECT
sum(CASE WHEN SLOT != -1 THEN parameter1 END) parameter1,
min(CASE WHEN SLOT != -1 THEN EndTime END) first_time,
max(CASE WHEN SLOT != -1 THEN EndTime END) last_time,
sum(CASE WHEN SLOT != -1 THEN parameter6 END) parameter6,
CASE WHEN count(DISTINCT CASE WHEN SLOT != -1 THEN SLOT END) > 0 AND ROUND(count(DISTINCT CASE WHEN SLOT != -1 THEN SLOT||STEP END)/count(DISTINCT CASE WHEN SLOT != -1 THEN SLOT END)) > 0 THEN FLOOR(count(DISTINCT CASE WHEN SLOT != -1 THEN SLOT||STEP END)/ROUND(count(DISTINCT CASE WHEN SLOT != -1 THEN SLOT||STEP END)/count(DISTINCT CASE WHEN SLOT != -1 THEN SLOT END))) ELSE NULL END num_slots,
sum(CASE WHEN SLOT = -1 THEN parameter1 END) minusone_parameter1,
min(CASE WHEN SLOT = -1 THEN EndTime END) minusone_first_time,
max(CASE WHEN SLOT = -1 THEN EndTime END) minusone_last_time,
sum(CASE WHEN SLOT = -1 THEN parameter6 END) minusone_parameter6,
count(CASE WHEN SLOT = -1 THEN 1 END) num_minusone
FROM
datatable
WHERE
tool = 'TOOL1'
AND lotid = 'LOT1';
PARAMETER1 FIRST_TIME LAST_TIME PARAMETER6 *NUM_SLOTS* MINUSONE_PARAMETER1 MINUSONE_FIRST_TIME MINUSONE_LAST_TIME MINUSONE_PARAMETER6 NUM_MINUSONE
423 02.02.12 13:51:28 02.02.12 15:13:41 0 *23* 46 02.02.12 14:20:35 02.02.12 15:18:47 0 5 this is the desired result
same query with Lot2:
PARAMETER1 FIRST_TIME LAST_TIME PARAMETER6 *NUM_SLOTS* MINUSONE_PARAMETER1 MINUSONE_FIRST_TIME MINUSONE_LAST_TIME MINUSONE_PARAMETER6 NUM_MINUSONE
506 24.02.12 03:00:47 24.02.12 04:03:24 0 *25* 1 24.02.12 03:19:26 24.02.12 03:19:26 0 1 so right now i get the desired results with this ugly query... but with combinations of several different conditions - e.g. several slots with more steps and a few with less... - it may not work.
Edited by: Paneologist on Feb 24, 2012 7:42 AM -
Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful. -
Not a single-group group function very urgent
HI,
select sum(avg(wait_to))+sum(avg(idle))+sum(avg(users))+sum(avg(system)) from system_cpu
where hostid='DSCP02469' group by cpuid
this query is working
but i want cpuid group to be displayed
so i wrote query like this.
select cpuid,sum(avg(wait_to))+sum(avg(idle))+sum(avg(users))+sum(avg(system)) from system_cpu
where hOstid=' ' group by cpuid it is throwing a error
not a single-group group function.
how can get sum of avg of colums,column based on some coloum
group by column
id,sum(avg( )) i have to get
please give me solution.
send me mail to [email protected]hi,
thanku for immediate reply but
if i do that
select cpuid, a+b+c+d total_value from (select cpuid,
sum(avg(wait_to)) a, sum(avg(idle)) b,sum(avg(users)) c,sum(avg(system)) d
from system_cpu where hostid='DSCP02469' group by cpuid)
SQL> /
select cpuid, a+b+c+d total_value from (select cpuid,
ERROR at line 1:
ORA-00937: not a single-group group functionelse
select cpuid, a+b+c+d total_value from (select
sum(avg(wait_to)) a, sum(avg(idle)) b,sum(avg(users)) c,sum(avg(system)) d
from system_cpu where hostid='DSCP02469' group by cpuid)
SQL> /
select cpuid, a+b+c+d total_value from (select
ERROR at line 1:
ORA-00904: "CPUID": invalid identifier2)
can we use select in select case
can we use select sal, case when sal then select * from emp like this
with regards
shannu sarma -
Problem in Matrix with double Grouping
Hi,
Iam new to Oracle Reports 9i.
I am trying to create a matrix report with double grouping.
when i tried to do that. the report window showing an error and its trying to close.
When i go for single grouping it works fine, but when i do for double grouping iam getting the problem.
can anybody help me in resolving this issue.
thanks
pradeepHi Amit
Its working fine in my system
and also im getting the quantity value as 1.00 by using this code
Dim matrix1 As SAPbouiCOM.Matrix
Dim oform As SAPbouiCOM.Form
oForm = SBO_Application.Forms.Item("frm_test")
matrix1 = oForm.Items.Item("1").Specific
oForm.DataSources.DataTables.Add("Approval")
oForm.DataSources.DataTables.Item("Approval").Clear()
Dim Str_Query As String = "Select Father,Code,Quantity From ITT1"
oForm.DataSources.DataTables.Item("Approval").ExecuteQuery(Str_Query)
matrix1.Columns.Item("V_0").DataBind.Bind("Approval", "Code")
matrix1.Columns.Item("V_1").DataBind.Bind("Approval", "Quantity")
matrix1.LoadFromDatasource()
Thanks
Shafi -
Using multiple wireless networks with Single sign on?
The university that I currently work for has switched from one wireless SSID to 2 separate SSIDs that separate the student users from the faculty/staff users. At this time only the Faculty Staff can log into STAFF and students can only log into STUDENT...
I have a few laptop carts that were setup for student use and have single sign on configured for the STUDENT wireless connection. The laptops are on the university's domain so that students have access to the home drives.
We run into problems when Faculty try to use a laptop to teach a class. They are unable to log in because their credentials are not authorized for the STUDENT wireless network.
So...Is it possible to setup 2 wireless profiles (STUDENT and STAFF) with single sign on and give the user an option to choose from?Hi,
Based on your description, I would like to suggest you use Group Policy to configure Wireless Network Settings:
Using Group Policy to Configure Wireless Network Settings
http://technet.microsoft.com/en-us/magazine/gg266419.aspx
Please follow the information from the link above to check the issue.
If it doesn’t work, I recommend you initial a new thread in our Windows Server Forum for further assistance.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=windowsserver
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Ungroup all groups then create a single group
Hey
I'm having trouble getting a script together where I can ungroup all groups in a document, then put everything under a single group. Everyhting I'm working with has a single layer, but for some of the arts I'm importing have groups within groups ect. To run certain actions I've made properly after I need eveything to be in one, single group.
I searched for an answer and found this (wirtten by Carlos Canto)
function ungroup(whereToUngroup, group) // where to ungroup? layer, document, other group?
for (i=group.pageItems.length-1; i>=0; i--)
group.pageItems[i].move(whereToUngroup, ElementPlacement.PLACEATBEGINNING);
But I'm having trouble getting it to work.ok, that's fair...
Functions 101 - you don't suppose to change anything, you suppose to build one (or someone else) and use it and re-use it. You just provide the parameters the function was build to receive.
to call the function (to use the function) provide it with your own parameter names, they don't have to match the original function names.
var myGroup = blablabla....the group you want to ungroup
var myDestinationGroup = blablabla....the group where you want the items once ungrouped, this could be a Layer or a Document
ungroup(myDestinationGroup, myGroup); // call the function
since you're new to scripting and new here, I would suggest start off good and mark your questions as "correct" (or answered, I don't remember) whenever you get a satisfactory answer to somewhat close the thread, you don't have to if you think you didn't get the answer you were looking for. -
Unable to view Single Source WebHelp properties, how to correct?
I am unable to view my Primary Layout single source webhelp properties in RH9. Several of the single source layout icons have "?" marks on them. How do I correct this? Thanks.
Hi Folks
If you ever noticed, the question mark is more of a standard symbol for "Help". Because RoboHelp is a help authoring tool, many of the icons sport a question mark. As Willam indicated, it doesn't mean that something is amiss, unfinished or undefined. Instead, it is simply the icon that represents the layout.
If you look in your Windows file system at any CHM file (a standard Windows help file) you will notice that it too has a question mark.
And the older WinHelp (.HLP) format (Pre-Windows 95) was a blue circle with a question mark:
Cheers... Rick
Maybe you are looking for
-
Print easy text.vi doesnt work in executable
I have 3 target machines running labview 2012 on a PXIe8101controller. In my statemachine the vi prints out a report using easy text report vi ( on report generation pallet) at the end of the test. Its an executable vi on all 3 machines. On 2 of t
-
Smart guides labels appears but sometimes NOT.
When I am using smart guides in illustrator cs6 it is problem which makes me nervous. When I select point, handles appear. When I move next to handle top the label appear. But SOMETIMES NOT appear, SOMETIMES APPEAR. It is terrible. - It might be nice
-
Differences between Infopak and uPerform
Dear all, Could anyone please cite few differences between Infopak and uPerform in terms of technical aspects. Thanks, Shilpa
-
How do I get rid of a shadow that suddenly appeared on two sides of my square brush?
I did a bunch of work today and rebooted my computer, and checked my brush tip shapes and presets but cannot figure out why my square hard brush has a shadowy edge on the right and bottom.
-
Can I open multiple windows in iPhoto?
How do I view photos in multiple albums/events at the same time?