Properties of the given BPM
Hi friends,
I am working on File --> RFC ---> File Scenario using BPM ...
Here I am getting system error in BPM and showing broken red brick in workflow at sender1 ...
I have given like this...
Start --> Receiver ->sender1>Sender2 ---> Stop.
I have given properties... for each
C2 = Abstractinterface FIleResponse_Abs
Recevier
1)Step Name = Receiver
Message = C1 (I defiend in container Category =Abstact interface type = FileRequest_Abs)
Start process = (Selected)
Mode = Asynchronous
2)Sender1
Step name = Sender1
Mode =Synchronous
Synchronous Interface = FileRequest_AI
Request Message= C1
Response Message=C2
3)Sender2
Step Name =Send2
Mode = Asynchronous
Message = C2
After Configartion,I have placed the sender sample XML in Server ...it is picking up properly.But
it showing error while it was executing in the BPM. Please suggest me what i have to do.
If you didnt understand I ll give some more details.
Pls help me in this regard.
With Regards,
Raju.
Hi,
USe reieve step i first...then in second send step open Synch-Asynch bridge abd Abstract interface.......Third send step will have inbound interface
Regards
Hemant
Similar Messages
-
PCK installation : misssing aii.properties file in the given path
Hi all,
i am doing installation for PCK from PCK installation guide, i want a aii.properties file in the given path usr/sap/<sapsid>/JC00/j2ee/cluster/server0 but it's missing
can anyone knows from where i can get this file .
thanksYou find it on the installation DVD. You can also use the aii.properties from an XI installation.
Regards
Stefan -
Err "Couldn't retrieve binding for the given channelId" in receiver SOAP CC
Hello.
We have increase the support package level of our XI 3.0 system from level 17 to 23. After this "upgrade" all interfaces using a receiver SOAP channel communication are getting the next error:
SOAP: response message contains an error XIServer/UNKNOWN/ADAPTER.JAVA_EXCEPTION - com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldnt retrieve binding for the given channelId: Binding:CID=8cb6335a548730ea9ca27aaa78034109; at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId(AbstractLookupManager.java:361) at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:421) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
We have done the next steps:
- Run SXI_CACHE and start a complete cache refresh,
- http://<Host>:<portNo.>/CPACache/refresh?mode=full
- Restart J2EE server.
The problem isn't solved.
any idea?Probably you need to ask your BASIS team if they have done it or not.
Secondly you can just see if something has been done under SWCV SAP BASIS --- http://sap.com/xi/XI/System --- Adapter Metadata, just by oping any adapter and then by looking at Properties or Hisotry from menu "Adapter Metadata". Here you can see the date under "Changed on", so if this matches with your upgrade date then something has been done. But this check will not help you know about the SP level. So better to ask with BASIS. -
The document type does not match any of the given schemas
Hi,
I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
in the properties i have the the schema name,Assemblyname
but i have got the error like The document type does not match any of the given schemas.
I have verified the schemas have deployed properly.
can you help me on this?Hi Sujith,
As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
If you are debatching on Order than Order schema should be deployed in the admin console.
One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
just looking after the body XPATH.
Regards,
Rahul Madaan -
BPE_adapter The process does not support the given synchronous interface
We are using PI 7.0 Sp 14 .
Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
Our scenario is Extern system send SOAP call to PI - BPM_SYNC_ASYnc_process --> BPM Proxy_send
this BPM proxy_send to ECC R/eceiver at R/3
We are getting the following error after migraiton. Please help
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Call Adapter
-->
Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
Thanks -
Show properties in the Search Result window
Hello all,
I would like to add few properties in the Search Result window such that the corresponding values are visible at a glance rather than checking the same in the respective Details wondow.
Example: Ia have created new Properties like ReqNo, ReqDate... and would like them to appear in the Search Result window.
Please help me solve this.
Im also reading the UI topic given in help.sap.com but am unable to find the answer.
Awaiting Reply.
Thanks and Warm Regards,
RituHi Ritu,
Go to KM Config > Content Management > User Interface > Settings > Layout Set and put "Search" in the filter. You should see "SearchResultLayoutSet" and this is the Layout Set that is used to display Search Results. Within the Collection Renderer there is Displayed Properties, this is what you need to focus on.
There are some other threads and documents associated with your question here on SDN. If you do a search for "SearchResultLayoutSet" in the SDN search you should get enough information to achieve your objective.
Sorry for the brief reply but I have one foot out the door heading for the airport and won't be back online for another couple of days.
Let me know how you go
Paul -
No network provider accepted the given network path
Hello everyone,
I've got a "Workgroup" network consisting of two XP Pro PCs, one XP Pro Laptop, a networked printer and a Linksys Router (BEFSR41) attached to a Linksys Wireless Router (WRT54G). All PCs are running
identical versions of ESET protection, of WIN XP Pro, etc.
When hard-wired, all PCs can access the internet, can share (Explore/delete/copy/move, etc.) files, can access the printer, etc. In other words, they all work like they are supposed to.
When using the WIRELESS connection on my laptop it's different. The Laptop can access the internet and printer but neither of the two PCs. Also, neither of the two PCs can access the Laptop either. When I attempt to (Windows) Explore wirelessly, or if I attempt to communicate with the PCs any other way, I get the error message "No network provider accepted the given network path".
I have searched the web and even tried the stuff that didn't make sense ("enable File & Print Sharing"... If it weren't already enabled then why would it work when hard-wired?). I even tried a new wireless router with the same results. Again, everything works as designed when hard-wired.
The ONLY time I have been able to wirelessly access the shared files on all PCs was when I turned off the wireless security. In other words, if I disable the wireless router's WEP/WPA/etc. keys, THEN I can do everything wirelessly that I could when hard-wired. I don't feel comfy about that ;-).
I didn't used to have this problem so I suspect it may have been caused by either a Windows or security software update.
Would someone please offer suggestions of what I might try to solve this problem? I'd surely be grateful!
Solved!
Go to Solution.Ya'all remember in the movie "Jumping Jack Flash" where
Whoopie Goldberg was given the riddle "What's the KEY?"?
IT'S FIXED!!! Now the bad news... I'm not certain whether it was
fixed by one, or a combination of things (and don't have the
time to reverse each step, one at a time, to determine).
I first disabled dynamic DHCP on the router then tried to
give each device on the network a fixed IP address. Since I
am not a wizard I may not have done this correctly.
Believing that, I took unnecessary devices off the network
keeping only one desktop PC and the laptop. Everything
worked correctly hard-wired but not wirelessly. This
eliminated the DHCP server as the cause.
I also tried static IP addresses with MAC filtering. Same
result.
A suggestion was made to use the router's installation disk
in the Laptop, making sure that was the ONLY PC attached to
the router to set it up. I decided to wipe it clean, start
from scratch and did a router reset (to factory specs).
Using the disk led me to unexpected errors in communication
during the setup... I must have tried three times before
having the installation go cleanly due to one setting or
another being incorrect on the laptop. I'm not sure at this
point whether the settings were changed during testing or
before the problem first surfaced. Sorry. :-(. Anyway, after
the installation went through, I was back at square one with
the same results and it was time to implement a
Strategy-Based Diagnostic routine!
Remember I mentioned in my OP that if I disabled the
wireless security then everything worked? That was my
primary clue. The router's instruction manual *clearly*
states the network will not perform as expected if the
security key in the router does not match the security key
used in the wireless devices (Laptop). I must have read that
100 times.
In the router setup window under Wireless\Wireless Security
it offers a security key choice of "Disabled", "WPA
Personal", "WPA Enterprise", "WPA2 Personal", "WPA2
Enterprise", "Radius" and "WEP".
On the Laptop, in the " Properties"
Association folder tab there is a drop-down menu for
"Network Authentication". Here I can choose a security key
of "Open", "Shared", "WPA", "WPA-PSK", "WPA2" or "WPA2-PSK".
This is where it gets confusing. Apparently there is a
difference between what the router calls a security key and
what the laptop calls a key... In other words, the security
key offerings of the router aren't *identical* to the
choices in the Laptop. After learning what differences each
security key had, I determined "WPA Personal" isn't the same
as "WPA-PSK". "PSK" does not equal "Personal" it means
"Pre-Shared Key". My bad. How stupid of me to assume only
the names were different! Why isn't there uniformity between
what the router offered and what choices the laptop had?
Knowing "Disabled" (called "Open" in the Laptop - see the
similarity???) worked, I tried the next stronger security
key, "WEP". That selection offered some protection but not
everything worked! Next I tried "WPA" then "WPA-PSK", etc.
until I found (what I believe to be) the only security key
to work properly... "WPA2 Personal" in the router and "WPA2"
in the Laptop (look IDENTICAL to you???) allowed me to do
everything that I could do hard-wired! I had assumed
erroniously, that if the next higher security key didn't
work, none would. I was wrong!
The weird stuff: I believe in my frustration, prior to
selecting the WPA2 key, I got distracted and I ran the
Wireless Network Wizard on the desktop PC. Keep in mind,
this PC has no wireless card. After it "completed
successfully" I explored the Laptop and visa-versa
wirelessly! This step may or may not have been the "KEY" all
along, sorry.
BTW, I think it was "D" (the key the song was written in -
I am using Project Server 2010 with SQL Server 2008 R2.
I have a PWA Instance which was running fine. I have a big number of projects and I do not keep site for all the projects as we do not need project site in our business.
Everything was running fine but during last few days, some of the jobs like Reporting (Project Publish) and Reporting (Project Delete) job is failing with the same error details for all the projects. I am not able to trace where the data is wrong/corrupt
and how to resolve it.
The error detail and ULS Log is given below anod I would appreciate if someone can guide me where the problem is and suggest me any solution.
QUEUE ERROR DETAIL:
General Reporting message processor failed:
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='4f36afe0-43dc-4143-befc-0452da416e69' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='071aeb7b-540e-45fa-b40b-a94a5d2e8e04' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='55445e77-51e3-40d8-a62f-e6db0b897444' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='3ab5a1ba-0915-45bb-a078-4b4b7c38af51' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b27acd8f-6cde-47d4-bd53-5930e84dc940' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b7250544-2a11-4887-8dcd-378b34b33ae1' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingProjectPublish.ReportProjectPublishMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='0706d212-f737-43ea-b694-c420488d57bb' JobUID='ca238fcf-d91b-46d6-a9c2-15f2cc35230d' ComputerName='WebSrv1' GroupType='ReportingProjectPublish'
MessageType='ReportProjectPublishMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine WebSrv1 for entries with JobUID ca238fcf-d91b-46d6-a9c2-15f2cc35230d.
ULS LOG:
Timestamp Process
TID Area Category
EventID Level Message Correlation
01/19/2015 19:05:07.44 Microsoft.Office.Project.Server (0x1D30) 0x23FC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=117.485513497555 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:07.66 Microsoft.Office.Project.Server (0x1D30) 0x2C94 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=192.534598230475 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.16 Microsoft.Office.Project.Server (0x1D30) 0x1CFC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=448.362263674397 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.36 Microsoft.Office.Project.Server (0x1D30) 0x17E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=162.22152253546 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.00 Microsoft.Office.Project.Server (0x1D30) 0x0898 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=557.699412860413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.36 Microsoft.Office.Project.Server (0x1D30) 0x1F20 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=253.695754010613 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.67 Microsoft.Office.Project.Server (0x1D30) 0x0D68 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=239.76302803952 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:10.64 Microsoft.Office.Project.Server (0x1D30) 0x3324 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=973.469925841736 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:11.92 Microsoft.Office.Project.Server (0x1D30) 0x2DB8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1275.5063556303 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:12.96 Microsoft.Office.Project.Server (0x1D30) 0x0A1C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1041.55499409959 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.15 Microsoft.Office.Project.Server (0x1D30) 0x0518 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=133.891034879385 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.35 Microsoft.Office.Project.Server (0x1D30) 0x14EC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=207.250205426327 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.69 Microsoft.Office.Project.Server (0x1D30) 0x10B4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=267.137845971639 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.93 Microsoft.Office.Project.Server (0x1D30) 0x14E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=209.552772167485 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.10 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=717.808222684698 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.67 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (FillTypedDataSet -- MSP_SRA_GetData). Execution Time=307.24482978413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:17.58 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=123.306566048297 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.12 Microsoft.Office.Project.Server (0x1D30) 0x25F4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_CreateSavedTasksForProject). Execution
Time=111.699445284922 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.61 Microsoft.Office.Project.Server (0x1D30) 0x2AC8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_Statusing_BuildTaskHierarchy). Execution
Time=449.279962592357 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tci Monitorableser1 PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] System.IO.FileNotFoundException: The site
http://epm.company.com/sites/Workspaces2/PROJECT_1 could not be found in the Web application SPWebApplication Name=SharePoint - 80. at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken
userToken) at Microsoft.SharePoint.SPSite..ctor(String requestUrl) at Microsoft.Office.Project.Server.BusinessLayer.Project.OpenProjectWeb(Guid projectUid) at Microsoft.Office.Project.Server.BusinessLayer.Project.SetPwsProperties(Guid
projectUid) at Microsoft.Office.Project.Server.BusinessLayer.Queue.ProcessPublishMessage.ProcessMiscellaneousPublishMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tcj Monitorable PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] MiscellaneousPublishMessage failed on project b95c52ba-bc00-4301-aab5-890d0b057c29 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwj Critical Standard Information:PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d
PWA Site URL: http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) RDS: The request to synchronize change(s) to project Project
UID='b95c52ba-bc00-4301-aab5-890d0b057c29'. PublishType='ProjectPublish' failed. Message: 'ReportingProjectChangeMessageFailed'. Message Body: The given key was not present in the dictionary. Error:(null) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4dWithout seeing the history, one possibility might be some corruption in the reporting database. Assuming that you are following best practices for SQL DB management, and this is not a DB neglect problem, then I would try to force a refresh to see if that
helps. You can do this by executing a custom field backup and then restore. Note: Do not do this during production hours. Let us know if that provides any therapy.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG -
Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?
You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck. -
How to get the last column info of the given table
Hi All,
I want to get the last column information like :
column name, datatype of the last column in the given
table use PL statement. Please help.
Thanks,
JPSCOTT@orcl SQL> desc emp
Name Null? Type
EMPNO NOT NULL NUMBER(4)
ENAME VARCHAR2(10)
JOB VARCHAR2(9)
MGR NUMBER(4)
HIREDATE DATE
SAL NUMBER(7,2)
COMM NUMBER(7,2)
DEPTNO NUMBER(2)
SCOTT@orcl SQL> select column_name, data_type from user_tab_columns
2 where table_name = 'EMP'
3 and column_id = (select max(column_id) from user_tab_columns
4 where table_name = 'EMP');
COLUMN_NAME DATA_TYPE
DEPTNO NUMBER
SCOTT@orcl SQL> -
HOw to create a text file in the given path and delete it after the use?
Hi all,
I am trying to create a text file at the given path and delete the created file after the use.
I am using following code.:
import java.io.*;
// write binary data as characters
public class RanIO {
public static void main(String f[])
// First illustrate append
String lineSep = "\n";
try {
File temp= new File("C:/Ash","cute.txt");
boolean ch=temp.createNewFile();
if(ch)
System.out.println("file created");
else
System.out.println("file Not created");
//writing to file
/* PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
p.print("Emp NO");
p.close();*/
// Open fileWriter in append mode
FileWriter fos = new FileWriter(temp, true);
BufferedWriter bw = new BufferedWriter(fos);
PrintWriter pw = new PrintWriter(fos);
double d=550;
// lineSep = System.getProperty("line.separator");
pw.print("Hello");
//pw.print( lineSep );
pw.print( d );
pw.close();
boolean det=temp.delete();
if(det)
System.out.println("File deleted");
else
System.out.println("File not deleted");
} catch (IOException ioe)
System.out.println( "Append IO error:" + ioe );
My problem:
1)
I am not able to write to the file. I want to know, where i am going wrong.
It is giving error message like
"Canot resolve Symbol: temp,"
But, FileWriter Constructor should accept a File type parameter.
here temp is a file parameter.
If i am not using file=new file();
i can't delete the file after the use. i.e if i use
PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
how can i delete cute.txt after the use?
2)
I am not able to write to the text file. file is created but, a blank file.
"Hello" is not written into the text file.
can anyone help me in this regard
Thanks in advance
AshviniThank you Ram,
But, i want to create a text file in Append mode.
for that i used
FileWriter fos = new FileWriter(temp,true); But, it is not accepting FileWriter constructor in
this format. if i use
FileWriter fos = new
FileWriter("c:/ash/cute.txt",true); it works fine. !!!!!Here's the javadoc
public FileWriter(File file,
boolean append)
throws IOExceptionConstructs a FileWriter object given a File object. If the second argument is true, then bytes will be written to the end of the file rather than the beginning.
Parameters:
file - a File object to write to
append - if true, then bytes will be written to the end of the file rather than the beginning
Throws:
IOException - if the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason
Since:
1.4
Are you using jdk.13 or lower ?
>
ONe more doubt, Does flush method deletes a file?
if not, then i need to use
File temp=new File("c:/ash/cute.txt");
FileWriter fos = new FileWriter(temp,true); //which
is again a problem
if(temp.delete())
out.println("File is deleted");
}I don't know whether i am taking it wrong ! or
anything wrong with my coding ! but, after creating
and writing data into a text file. I must delete it
as it contains confidential informations.
Regards,
Thanks.'flush' writes to a file immediately. Else you should explicitly call 'flush' to write contents from buffer to underlying source.
javadoc again
PrintWriter
public PrintWriter(Writer out,
boolean autoFlush)Create a new PrintWriter.
Parameters:
out - A character-output stream
autoFlush - A boolean; if true, the println, printf, or format methods will flush the output buffer
cheers,
ram.
Question; What do you gain by opening a file, writing to it and deleting it in the same program ? -
I am trying to connect to a Odata Data feed from Excel 2013 Power Pivot
The datasource is in sharepoint site eg: https://sitename/Shared%20Documents/datafeed.atomsvc
getting below error
Error message:
Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported.
============================
Call Stack:
============================
at Microsoft.Data.DataFeedClient.DataFeedODataReader.ValidatePayloadKind(ODataPayloadKind payloadKind, ODataMessageReader odataMessageReader)
at Microsoft.Data.DataFeedClient.DataFeedODataReader.InterceptODataException(Action action)
at Microsoft.Data.DataFeedClient.DataFeedODataReader..ctor(IODataResponseMessage responseMessage, Int64 maxReceivedMessageSize)
at Microsoft.Data.DataFeedClient.DataFeedODataReader.CreateReader(IWebResponse webResponse, Int64 maxReceivedMessageSize, Boolean applySlashUpdatingBaseUriResolver)
at Microsoft.Data.DataFeedClient.ODataHelper.GetCollectionsFromServiceDocumentUrl(Uri serviceDocumentUrl, DataFeedConnection connection)
at Microsoft.Data.DataFeedClient.DataFeedConnection.Open()
at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
Appreciate suggestions/answers
NOTE: The error is showing only while using Excel 2013 powerpivot
its working good with Excel 2010 powerpivotAnita,
Please look into using Power Query to use OData as a source in Power Pivot.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Text field properties-Using the 'required' option in the text field properties.
Using the required' option in the text field properties.
The 'help' manual describes the 'required' function as this: Required Forces the user to fill in the selected form field. If the user attempts to submit the form while a required field is blank, an error message appears and the empty required form field is highlighted.
My users ARE not submitting the form, they open the pdf, fill it out and print it. HOW can I, make a field "required', I don't want them to skip/leave blank specific fields. However, if I choose the box 'required' in the text field properties, and I begin filling out the form, I can just tab past that field that I've choose as 'required', and I do not get
prompt/error message or anything, it allows me to save, or print.
I WANT SOME TYPE OF message (similar to enter a company order form
off the web, where you can't continue without filling out 'required' fields).
Is there a step/option I am not doing?Then you are going to have to write some JavaScirpt to be executed by the "Will Print" document action to check all the requried fields, either by name or by the 'required' property and handle the issue of the imcomplete fields. You will not be able to stop the print, but you could display and error field so the user knows the form is incomplete and the printed form also conatains this information.
-
How to get the date of Friday for the given week
HI,
I have a requirement to get the date of Friday for the given week.
Eg: I have an input of 200722 (Yearweek), From this I need to get the Date of the friday for this week 22 of Year 2007.
Plz let me know how to get this..
Thanks in advance..
Sridhar.Hi,
Thanks for your reply...
I have implemented your logic but not getting exact output as required.
Suppose, If i give the input as 200720, I am getting an output as 18 (friday of week 20 of year 2007), but i need to get an output of 18.05.2007
Plz let me know how to do thdi.
Thanks in advance.. -
Hi,
I am working on SSRS 2008 R2.
My Colleague gave me one RDL. I have added it to my SSRS project on BIDS & Tried to Open by double-click on that RDL.
I got a popup error saying "Failed to open report 'reports_List.rdl'. clicked on
Details button & noticed error explanation as . "Invalid character in the given encoding. Line 1, position 1".
When i try to View Code of this RDL, I got another error message saying "Exception from HRESULT: 0x80041FEB"
Can anybody suggest me ... what exactly the root cause of it? how can i resolve it ?
thanks a lot in advance !
best regards,
VenkatHi Venkat,
Did you use Visual Studio 2010 on your test? It is a known issue of Visual Studio 2010. Please refer to the following document. It has fix method provided by the Microsoft Web Development Tools team to work around the issue.
https://connect.microsoft.com/VisualStudio/feedback/details/552134/hresult-error-creating-timetracking-sample-web-site-project
Since the issue related to Visual Studio. I suggestion you post the question in the following forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=Vsexpressvb
It is appropriate and more experts will assist you.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support
Maybe you are looking for
-
Changing selectindex in AS of a datagrid doesn't work!?
I'm having a real problem changing the selectedindex of a datagrid on the fly after a re-sort (Using AS3 with Flex4). See below. Particularly the function call comments. My sort works and it gets assigned to ldimmer_checkChannel.selectedIndex with th
-
How to refresh a view on click of a link in UI5
Hi, I have created an SAPUI5 application with 1 view (main.view.js) in Eclipse. I have a link in the view along with some input fields and buttons, on click of the link, I need to refresh view (main.view.js) . Can some one please help me on this? Re
-
Are there any problems saving files in Pages for iPad?
I have a new iPad, and I need to chose a wordprocessing App. Friends have advised me that there may be a difficulty saving files from Pages. If so then is there a recommendation for a different wordprocessing App ?
-
Transferring all data from one computer to another
Hi, I have an iMac and a Macbook Pro - I would like to completely switch the data on the two computers. In other words, I'd like to put everything that is on my macbook on the iMac, and vise versa. I have backed both computers up using Time Machine
-
I can to have two SSIDs for all branch of my country, but each ones in a differents subnets,for example: Area 1 SSID 1 : guest -> 192.168.1.1 SSID 2 : office -> 192.168.2.1 Area 2 SSID 1 : guest -> 192.168.3.1 SSID 2 : office -> 192.168.4.1 I have co