Provision User to AD Group
Hi,
I have a senario where a User "U", Organizaton "O" and Group "G".
In AD, "G" is part of "O" i.e "O" is the organizational Unit and "G" is the group defined in the organizational unit.
When user "U" is assigned to Group "G", OIM should add the user to Group "G" in AD under organization "O".
Is their any OOTB by which I can achieve this functionality? If not please suggest a suitable solution.
Thanking you in advance for your response.
If you are using access policies, and the O value is also used for a group membership rule, you could add the child table entry for G to the access policy and the user would automatically get this value. You can also have a task that runs after user creation on the AD User process definition that has logic to say if O=XYZ, then using the addProcessFormChildData, insert the G=XYZ intot he child table. You can also have a task that runs on "Organization Updated" that recalculates the log, and removes the old and adds the new.
All this stuff is possible with the APIs.
-Kevin
Similar Messages
-
Provisioning users to AD groups in OIM 11gR2
I could use some advice on how to resolve this issue I am having.
Using the Active Directory connector (11.1.1.5) in our OIM 11gR2 development environment I can successfully provision OIM users to our AD resource. I have successfully run the org and group lookup recons, and provisioned users do go into the correction ou in AD.
However when I select which groups a user should be a member of in the ADUSERC child form (via the lookup), the user is not provisioned with the correct group membership in AD.
A separate issue is how to map the objectClass in AD in the ProvAttrMap; could anyone point me in the direction of how to go about that?
ThanksThe ObjectClass should be configured in this lookup Lookup.Configuration.ActiveDirectory
Check below
http://docs.oracle.com/cd/E22999_01/doc.111/e20347/extnd_func.htm#sthref221
4.6 Configuring the Connector for User-Defined Object Classes -
OIM-OID! provisioning users to OID groups-QUICK HELP NEEDED
hi,
I've installed OIM connected to OID.
I've been assign some tasks:
1) Creating access policy such that when a user is created in OIM, he is provisioned to two groups in OID.... ie. in cn=users and cn=employees (where cn=employess is the group i create under cn=Groups,dc=ad,dc=company,dc=com)
2)Creating an access policy such that when a user is created in OIM, he is provisioned to two additional groups in OID, say I've created two custom groups in OIM and attached membership rules to them. Now when i create a user satisfying the two membership rule,he is assigned to those two OIM groups and provisioned to cn=users,dc=ad,dc=company,dc=com and cn=group1,cn=Groups,dc=ad,dc=company,dc=com and cn=group2,dc=ad,dc=company,dc=com.
Also i want to populate those OID groups into a child table and create their lookups in Process form
Please help me materialise and understand these concepts.
The OID Lookup Recon task for group is running fine, lookup.oid.group is populated with values.
how those groups can be populated in process form child table(OID user group table).
Edited by: Chhavi Saluja on Feb 12, 2010 12:51 AMAs mentioned in my other post you can put these groups in access policy form and all the users assigned by this policy will get these groups. Any issue revert back.
-
Can't Provision user from OIM to AD (manaul provis
can't Provision user from OIM to AD (manual provisioning ) failed with Error
the following is connector server log
==========================================
DateTime=2012-07-18T08:39:32.8713100Z
ConnectorServer.exe Error: 0 : System.ArgumentNullException: Value cannot be null.
Parameter name: Parameter 'uid' must not be null.
at Org.IdentityConnectors.Common.Assertions.NullCheck(Object o, String param)
at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.UpdateImpl.ValidateInput(ObjectClass objclass, Uid uid, ICollection`1 attrs, Boolean isDelta) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line 1568
at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.UpdateImpl.Update(ObjectClass objclass, Uid uid, ICollection`1 replaceAttributes, OperationOptions options) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line 1365
at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.ConnectorAPIOperationRunnerProxy.Invoke(Object proxy, MethodInfo method, Object[] args) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line 244
at ___proxy1.Update(ObjectClass , Uid , ICollection`1 , OperationOptions )
at Org.IdentityConnectors.Framework.Impl.Server.ConnectionProcessor.ProcessOperationRequest(OperationRequest request) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\Server.cs:line 609
DateTime=2012-07-18T08:39:37.8558126Z
1- iam using OIM 11.1.1.5 / applied patch p13704894_111150
2- this the target system LDAP on Windows Server 2008 R2 Entrprise version 6.1(7601) , Service Pack 1
3- and the connector server and connector version , activedirectory-11.1.1.5.0 , Connector_Server_111150
i noticed that for any user i create on OIM objectGUID is 0 , i can read groups and organizations from LDAP with no errors
please supportThis issue is coming because your object guid is not getting synchronized properly. Login to design console and open AD User form. Go to pre-populate tab. Open prepop adapter for User Principal name. Here bydefault IT resource name passed is Active Directory whereas you should have your IT server name which I think bydefault is AD Server. In the Mapto section select Process data and qualifier field will have AD server. Click on save button. Save your form.
Retry your test case now. This will resolve your problem.
regards,
GP -
Provisioning lost against native groups when new MSAD domain added
Hi,
HSS and essbase 9.3.1
I have added an additional MSAD domain. There are native groups with what was the only msad domain users were in. On Oracle's direction I applied a hss patch ( 7020560) which resolves a problem where there is a confliction with two msad domains and native groups. I had successfully done this is development. However, in production only the new domain and the test user is listed as a user in essbase. I exported the sec file and the existing users are not present. I have tried the following
1. Provisioned user directly from the old domain, refreshed HSS and this worked
2. Removed the new domain from the search order - all the users come back
3. Changed the search order (2 >3) and this made no difference
4. Ensured the patch was applied correctly (replace two ,jar files, create some indexes against the HSS db and reploy application server.
I am restarting all the services for completeness.
I would appreciate any help. The logs are giving nothing concrete away.
Thanks,
NathanDon't worry.
Thanks,
Nathan -
Add users to a group from another Active Directory domain
Hi Folks,
I need add users in a group the active directory through the FIM 2010 R2.
My scenery it is:
Domain A with FIM 2010 R2 provisioning users for Domain B;
I need get users the Domain B and add in group in Domain C.
What's better way, create FIM portal for them, or create aditional script/development for FIM 2010 R2.
Thanks a lot!
Wilsterman FernandesThere are two approaches to do it.
1st - easier - using FIM Portal/Service - just create a criteria based group that would be created in Domain C.
2nd - more difficult, but you don't need FIM Service/FIM Portal - just export all users to one table in SQL and create a view, where a group and members (users from Domain B) are. It would be cheaper as you don't have to have FIM Service to do it. But if
you have it, first is easier.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer. -
We have a SharePoint Enterprise 2013 system at RTM level. We've installed Workflow Manager 1.0 by following the steps at
http://technet.microsoft.com/en-us/library/jj658588.aspx. For the final step of Validating the Installation we created a simple list-level workflow and verified that the workflow
is invoked successfully. This is working successfully, but only for a single user. If other users in the same site collection try to invoke the workflow on this same list we get the ULS Log Error:
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
followed by:
Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
(as details below).
All accounts that are attempting to use the Test Workflow (both working and non-working user accounts) are valid AD accounts and are included in the User Profile Sync that runs nightly. All have Contribute or Design permission level (and for testing,
Full Control).
What could cause the Claims Authentication to fail when certain users attempt to launch the workflow?
Thank you for your response.
Jim Mac.
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was
not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType,
Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity,
SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdent... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected ...ity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String
encodedIdentityClaimSuffix) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim)
--- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim logi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...nClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.Securi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...tyTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) 94aa5c2d-fa45-9b83-b203-a92b20102583Hi Aries,
I am facing issue with work flow where Workflow goes to Suspend mode.
I am facing an issue with SP2013 Custom Workflow developed using Visual Studio 2012.
Objective of the Custom workflow: User fills the form and submit, list get updated and workflow will initiate and go for the process.
Issue: After the deployment of WF, for first time when user is filling the form and submit, list is getting updated. But the Workflow Goes to "Suspend" mode. (
This Custom Workflow has a configuration file where we are providing other details including ID of Impersonator (farm is running under Claim Based Authentication).
Work flow works fine once when the Impersonator initiate the workflow (Fill the form and submit for approval) and everything works fine after that.
Following steps are already performed
1.Make sure User profile synchronization is started.
2.Make sure the user is not the SharePoint system user.
3.Make sure the user by whom you are logged is available in User Profile list.
4.Step full synchronization of User Profile Application.
From the ULS logs it seems the user's security token from the STS service and User profile service is not being issued.
Appreciate any thoughts or solution.
Following are the log files.
<-------------------------------Information taken from "http://YYYY.XXXXX.com/sites/xxxx/_layouts/15/wrkstat.aspx" where it is showing workflow status as "Suspend"------->
http://yyyy.XXXX.com/sites/xxxx/_vti_bin/client.svc/sp.utilities.utility.ResolvePrincipalInCurrentcontext(input=@ParamUser,scopes='15',sources='15',inputIsEmailOnly='false',addToUserInfoList='False')?%40ParamUser='i%3A0%23.w%7CXXXXX%5Csps_biscomdev'
Correlation Id: f5bd8793-a53c-2127-bfb1-70bc172425e8 Instance Id: 14a985a0-60c8-42db-a42c-c752190b8106
RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There
has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["f5bd8793-a53c-2127-8654-672758a68234"],"request-id":["f5bd8793-a53c-2127-8654-672758a68234"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["34"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
realm=\"b14e1e0f-257f-42ec-a92d-377479e0ec8d\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]79e0ec8d\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Fri, 10 Apr 2015 19:48:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
ULS Log
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Authentication Authorization agb9s Medium OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6k Verbose Value for isAnonymousAllowed is : False f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6l Verbose Value for checkAuthenticationCookie is : True f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=18.7574119057031 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.73 PowerShell.exe (0x29BC) 0x2B9C SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {AF89E1D7-C47F-467B-8FD4-D7DC768820EE}
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Parent No
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Application Authentication Pipeline). Parent Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Getting Site Subscription Id). Parent [S2S] Getting token from STS and setting Thread Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Getting Site Subscription Id). Execution Time=0.341314329055788 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Reading token from Cache using token signature). Parent [S2S] Getting token from STS and setting Thread
Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Reading token from Cache using token signature). Execution Time=7.5931438213516 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajwpx Medium SPApplicationAuthenticationModule: Failed to build cache key for user f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Topology aeayb Medium SecurityTokenServiceSendRequest: RemoteAddress: 'http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc' Channel:
'Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustChannelContract' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Topology aeax9 Medium SecurityTokenServiceReceiveRequest: LocalAddress: 'http://c1vspwfe01.vitas.com:32843/SecurityTokenServiceApplication/securitytoken.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteSecurityTokenServiceOperationServer). Parent No f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {F17590DF-49D9-439D-86BC-5AE6416BB765} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8b Verbose Looking up site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {3847D5A4-15C6-4AF9-B062-E22BB555DF4F} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User Profiles: f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The
incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ae0tc High The registered mappered failed to resolve to one identity claim. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteSecurityTokenServiceOperationServer). Execution Time=17.1551132895382 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication fsq7 High SPSecurityContext: Request for security token failed with exception: System.ServiceModel.FaultException: The server was
unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in
order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication 8306 Critical An exception occurred when trying to issue security token: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Application Authentication Pipeline). Execution Time=52.3525336320678 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajezs High SPApplicationAuthenticationModule: Error authenticating request, Error details { Header: {0}, Body: {1} }. Available
parameters: 3001000;reason="There has been an error authenticating the request.";category="invalid_client" {"error_description":"The server was unable to process the request due to an internal error. For more information
about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as
per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} . f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 8nca Medium Application error when access /sites/testrpa2/_vti_bin/client.svc, Error=The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context,
Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationAuthentication(Uri context,
SecurityToken onBehalfOf) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.<>c__DisplayClass4.<GetLocallyIssuedToken>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
secureCode) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIClaimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpContext, SPFederationAuthenticationModule fam)
at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.AuthenticateRequest(Object sender, EventArgs e) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=62.2890618779761 f5bd8793-a53c-2127-8485-418c67f110f6
Regards
Sakti -
Error message "The specified user or domain group was not found" when trying to access certain sites
Hello.
My setup is as such (this is a testing environment), spread over two virtual machines:
-Windows Server 2012 with AD DS and MS SQL Server 2012
-SharePoint Server 2013
When trying to access a lot of site collections in different web applications, I am given this error message. The error message started suddenly appearing, and I do not know what caused it. It started happening after I turned on Request Management Service
Application, though I can't see how that would cause this, and it was not fixed after I turned it off.
I have the necessary permissions, as I have been able to log on to the sites before without any issue. I am using a domain administrator account who is a site collection administrator.
At first I thought it was an issue related to User Profile Service Application, as I was having issues starting the Synchronisation instance. I deleted and re-installed UPS, got synchronisation to work, and it still does not work. I have made no changed
to the AD schema. I have not moved any accounts recently, and I have not deleted any accounts.
Here are the ULS log entries. It seems to have been truncated some.
06/11/2014 10:17:31.94 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|sp\administrator, ClaimsCount=26 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Database ahjqp High [Forced due to logging gap, cached @ 06/11/2014 10:17:31.95, Original Level: Verbose] SQL connection time: 0.0556 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 3356 byte file stream dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=66.6457 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Portal Server User Profiles ajk4d Medium UserProfileProperty_WCFLogging::Begin ProfilePropertyServiceClient.ExecuteOnChannel acc2999c-dfbc-a0b4-a4e8-f962e574ee66
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Portal Server User Profiles ajk35 Medium MossClientBase_WCFLogging::Begin MossClientBase.ExecuteOnChannel acc2999c-dfbc-a0b4-a4e8-f962e574ee66
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Portal Server User Profiles ajk36 Medium MossClientBase_WCFLogging:: MossClientBase.ExecuteOnChannel - Executing codeblock on channel acc2999c-dfbc-a0b4-a4e8-f962e574ee66
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://sp13:32843/44fa09d6891d4d7bb9856a0da10f6a84/ProfilePropertyService.svc' Channel: 'Microsoft.Office.Server.UserProfiles.IProfilePropertyService' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties' MessageId: 'urn:uuid:ec3c0f34-3285-4771-a7a1-24039cb4ced8' acc2999c-dfbc-a0b4-a4e8-f962e574ee66
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC Web Content Management Publishing 7fz3 Medium Setting [Display] as the FormContext.FormMode for the current page dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding control 'Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource': Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.get_Request() at Mi... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...crosoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.SharePoint.Publishing.CachedAreaLookup.EnsureLookup(Boolean errorsAsExceptions) at Microsoft.SharePoint.Publishing.CachedAreaLookup.GetCachedAreaOrException() at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetCachedWebInfo(CachedAreaLookup cachedAreaLookup) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetWebNavigationSetting... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...s(CachedAreaLookup cachedArea, CachedAreaLookup& parentCachedArea, Exception& loadError) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettingsList(CachedAreaLookup cachedArea, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](CachedAreaLookup cachedArea, String siteMapProviderName, Boolean includeInheritedSettings, CachedAreaLookup& cachedAreaWithSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](SPWeb web, String siteMapProviderName, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.GetCurrentWrappedProvider() at Microsoft.SharePoint.Publis... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...hing.Navigation.SwitchableSiteMapProvider.get_RootNode() at Microsoft.SharePoint.Publishing.Navigation.SwitchableDataSourceBehavior.AssignProperties(SiteMapProvider targetProvider) at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.AddedControl(Control control, Int32 index) at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding control 'Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource': Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.get_Request() at Mi... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...crosoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.SharePoint.Publishing.CachedAreaLookup.EnsureLookup(Boolean errorsAsExceptions) at Microsoft.SharePoint.Publishing.CachedAreaLookup.GetCachedAreaOrException() at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetCachedWebInfo(CachedAreaLookup cachedAreaLookup) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetWebNavigationSetting... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...s(CachedAreaLookup cachedArea, CachedAreaLookup& parentCachedArea, Exception& loadError) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettingsList(CachedAreaLookup cachedArea, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](CachedAreaLookup cachedArea, String siteMapProviderName, Boolean includeInheritedSettings, CachedAreaLookup& cachedAreaWithSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](SPWeb web, String siteMapProviderName, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.GetCurrentWrappedProvider() at Microsoft.SharePoint.Publis... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...hing.Navigation.SwitchableSiteMapProvider.get_RootNode() at Microsoft.SharePoint.Publishing.Navigation.SwitchableDataSourceBehavior.AssignProperties(SiteMapProvider targetProvider) at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.AddedControl(Control control, Int32 index) at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding control 'ASP._controltemplates_15_metadatanavtree_ascx': Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyCla... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...im(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.get_Request() at Microsoft.SharePoint.SP... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...Site.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationSettings.GetCachedArea(SPWeb web) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.GetMetadataNavigationHintsForList(SPWeb web, Guid listGuid) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationSettings.GetMetadataNavigationSettings(SPWeb web, Guid sourceListId, Boolean check... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...WebPropHint) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.get_NavigationSettings() at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.EnsurePageInitEventHandling(Control controlOnPage) at Microsoft.Office.Server.WebControls.MetadataHierarchyDataSourceControl.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.AddedControl(Control control, Int32 index) at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8nca Medium Application error when access /SitePages/Home.aspx, Error=Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Runtime tkau Unexpected System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ...Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ...SPSite.get_Request() at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ... System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteS... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ...tep(IExecutionStep step, Boolean& completedSynchronously) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General aat87 Monitorable dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.05 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://sp13:80/SitePages/Home.aspx)). Execution Time=97.7205 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35This is a very generic error message.
What user you are trying to search. Are you using username, display name or email address when searching
Was any domain related changed done
What if that users tried to logon to sharepoint site.
Does this error occur with all the account when you click edit? If not, based on the error,
the user account which might be removed from Active Directory or renamed accidentally. Please have a check.
Try to follow below:
http://architectevangelist.wordpress.com/2010/12/07/sharepoint-2010-the-specified-user-or-domain-group-was-not-found/ -
Need to know how to better manage revolving users in a group
I have a new Beehive Online group set up for a external partner collaboration. Members of the group are only from Oracle or that external partner. While the BHO group is new, the collaboration has been in place for a long time (since 2007). Initially at Sun Microsystems, and now Oracle.
In my description here... when I say "collaboration" you can translate that to roughly equivalent to "BHO Group"....
The nature of the collaboration is that both companies move people to/from the collaboration, depending on the work in progress. I'm not saying there are changes daily, but there can be changes every month or so. It also happens that people working on the collaboration may be moved from it for many months or longer, and then get moved back to the collaboration at a later time. Ie, the may revolve in and out of the collaboration. Trouble is, when they are moved from the collaboration there is no guarantee that they ever get moved back to it. When a person is not part of the collaboration, their access to collaboration info is taken away.
So my problem is understanding how to manage this better in BHO.
I need to allow a user to be removed from a group, with the possibility (but not certainty) of adding them again.
-- my understanding that delete user would then require SysAd intervention to add them back.
-- I also am not clear on whether deleting the user affects their other group memberships.
I tried to find out more about locking a user
-- but it seems like that affects more then the group.
Whats the recommended way to deal with this?
Thx!I tried deleting the "verified" user using the group creation/manage tool.
- click "View members"
- select the checkbox next to the user
- click the button "Delete (non-Verified Users)"
Doing that, the user is not removed AND I get an error message in red at the top of the page that says:
'Only selected non-"Verified" member(s) have been deleted. Go to https://beehiveonline.oracle.com/BOLAdmin.html to delete "Verified" users'
So I went to the Admin tool:
- selected my group,
- selected the user from the list
- clicked the "Delete User" button above the list.
Got the warning pop-up about the user needing to be added back by SysAd, ignored it and clicked "OK".
Got a success pop-up with all kinds of internal response tracking stuff in it. Clicked "OK"
And the user is gone from the group in the Admin tool. HOWEVER, the user still shows up in the group list in the group create/manage tool.
Will the user disappear from that list? If not, the list would be misleading.
Thx!
--Resii -
Assigning User to a Group.
Hi All,
We have installed EP 7.0. We need to add the user "xxx" to the group "SAP_HR_LSO_DEVELOPMANAGER".
We searched for the user "xxx" and click on modify button to edit the Assigned groups. But the Add button is disabled for the Admin.
How to enable it ? & How to add the user to the group?
Kindly provide your answers.
Thank You.
Regards,
Eben.Hi,
I hope the following links will help you,
https://forums.sdn.sap.com/click.jspa?searchID=15809839&messageID=4604222
Re: Add users to a group through programming
Regards,
Harish -
Hi,
I installed OIM 11.1.1.3 and i am able to access it.
Now i am trying to provision an user to a database table using "User Database Management connector". I worked on it by using version 9.1.0.4, but i failed to provision the users.
I am getting an error message that "Error occurs while initializing parameters in initutil".
Can anybody please help me how to solve this issue.
Thanks,
SRI.Thank you for your reply.
I am trying to test for provisioning users, could you please suggest me the version for the AD or any other connector that is used to deploy with the OIM 11.1.1.3.
Thanks,
SRI.
Edited by: Sri Kishore on Aug 25, 2010 11:29 PM -
Getting error while removinf user from AD group
Hi,
In AD User process definition, there is a default taks called :Remove user from Group. This task runs after another task called Organization Name Update . Whenever, an user is moved from one org to another org, his organization gets updated in AD user form and this task"Remove user from Group" runs. The work of this task is to remove the user from old groups. BUt the task is getting rejected and i see the below error in log files.
11/07/04 00:24:17 Data AccessException:
11/07/04 00:24:17 com.thortech.xl.orb.dataaccess.tcDataAccessException: DB_READ_FAILEDDetail: SQL: select UD_ADUSRC_GROUPNAME from UD_ADUSRC where UD_ADUSRC_KEY = Description: ORA-00936: missing expression
SQL State: 42000Vendor Code: 936Additional Debug Info:com.thortech.xl.orb.dataaccess.tcDataAccessException
at com.thortech.xl.dataaccess.tcDataAccessExceptionUtil.createException(Unknown Source)
at com.thortech.xl.dataaccess.tcDataBase.createException(Unknown Source)
at com.thortech.xl.dataaccess.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataobj.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.getChildTableFieldValue(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.getRunTimeValue(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.getRunTimeValue(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADREMOVEUSERFROMGROUP.implementation(adpADREMOVEUSERFROMGROUP.java:48)
If anybody knows the solution for this then plz let me know.
Thanks,
Kalpana.I think the mappings and all would be correct. Here is what Kevin meant:
- Let's assume the AD user account is a part of GroupA, GroupB and GroupC
- Now on Change Organization completion if you invoke Remove user from Group then the adapter/process task has no way to know that which 3 of those groups has to be removed (or all 3 for your case)
- Alternatively if you use API's to remove the group then this task would be invoked by the original OIM process/triggers and so the actual value would be known to adapter/process task. -
Provisioning: Users from OIM to Active Directory
Dear Experts!
I am trying to setup provisionig from OIM to AD. I just want to provision Users from OIM to AD.
I am going through this documentation/tutorial:
http://download.oracle.com/docs/cd/E11223_01/doc.910/e11197/deploy.htm#insertedID0
i also read this:
http://www.oracle.com/technology/obe/fusion_middleware/im1014/oim/ad_provision/prov2ad.htm
But it just won't work. The provisioned resource get's always status rejected in the (To-Do List --> Open Tasks).
Then i tried to test the connection to AD using this documentation:
http://download.oracle.com/docs/cd/E11223_01/doc.910/e11197/testing.htm
And i get this error in the console:
http://img689.imageshack.us/img689/3190/errorq.png
The IT resource: ADITResource looks like this:
Remote Manager Prov Script Path:
Admin FQDN: [email protected]
Use SSL: no
Remote Manager Prov Lookup: AtMap.AD.RemoteScriptlookUp
Target Locale TimeZone: GMT
Port Number: +636+
AtMap ADUser: AtMap.AD
ADGroup LookUp Definition: Lookup.ADReconciliation.GroupLookup
isUserDeleteLeafNode: no
Allow Password Provisioning: no
UPN Domain: domain-test.local
AtMap ADGroup: AtMap.ADGroup
ADAM LockoutThreshold Value: +5+
isADAM: no
Admin Password: *********
Invert Display Name: no
Root Context: dc=domain-test,dc=local
Server Address: testing-server.domain-test.local
Could be the problem that i don't use SSL? I don't set Passwords in AD, i have read that then i don't need SSL...?
I am new to OIM, so your response is greatly appreciated!
Thank you very much in advance!Hello again Raj!
Thank you for your answer. You have always good ideas...
*1) Whats the response that you are getting from AD for this operation. Check this as following:*
Go to Users->UserABC->(Resource Profile from Drop down)->(Click your particular resource instance)->(Select the rejected task precisely "Create User")_
I get this on the Task Name - Create User:
Status:Rejected
Response: Please Select the Organization or Container Name from Organization Name Lookup
Response Description: Please Select the Organization or Container Name from Organization Name Lookup
But i can't get to populate the Organization Name on the user form, because there are no values available.
Under Error Details there is nothing.
*2) If your IT resource parameters are incorrect, you will get a connection error in logs. Your port information is correct, it has to be Port->389 and Use SSL-no*
I have created a new IT resource without SSL. Just to test the connection to AD. It works because I get “Successfully established connection to the AD_Test_without_SSL.”
Bellow is my NEW configuration for the IT Resource.
IT Resource Name:* AD_Test_without_SSL
IT Resource Type:* AD Server
ADAM LockoutThreshold Value:* 5
ADGroup LookUp Definition:* Lookup.ADReconciliation.GroupLookup
Admin FQDN:* [email protected]
Admin Password:* *********
Allow Password Provisioning:* no
AtMap ADGroup:* AtMap.ADGroup
AtMap ADUser:* AtMap.AD
Invert Display Name:* no
isADAM:* no
isUserDeleteLeafNode:* no
Port Number:* 389
Remote Manager Prov Lookup:* AtMap.AD.RemoteScriptlookUp
Remote Manager Prov Script Path:*
Root Context:* dc=domain-test,dc=local
Server Address:* testing-server.domain-test.local
Target Locale TimeZone:* GMT
UPN Domain:* domain-test.local
Use SSL:* no -
Unparseable Date when Provisioning User from OIM to EBS HR
Hi expert,
I'm integrating E-Business Application using 'Oracle EBS HR Foundation User Management Connector version 9.1.0.4.0
with OIM version 11.1.1.5.0 (plus BP06) and I also set value of 'Manage HR record' to 'Yes'.
While provisioning user to EBS. It has some error occur about 'Unparseable date: "2013-05-24 00:00:00" '
############ ERROR ###########
[OIMCP.EBSUM] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: da74dbf2fbfe8d95:7819efa0:13eca22628a:-8000-0000000000012282,0] [APP: oim#11.1.1.3.0] oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagement : updatePerson
[2013-05-24T09:50:36.911+07:00] [wls_oim1] [ERROR] [] [OIMCP.EBSUM] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: da74dbf2fbfe8d95:7819efa0:13eca22628a:-8000-0000000000012282,0] [APP: oim#11.1.1.3.0] Failed to create employee
[2013-05-24T09:50:36.912+07:00] [wls_oim1] [ERROR] [] [OIMCP.EBSUM] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: da74dbf2fbfe8d95:7819efa0:13eca22628a:-8000-0000000000012282,0] [APP: oim#11.1.1.3.0] Description : Unparseable date: "2013-05-24 00:00:00"
[2013-05-24T09:50:36.912+07:00] [wls_oim1] [ERROR] [] [OIMCP.EBSUM] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: da74dbf2fbfe8d95:7819efa0:13eca22628a:-8000-0000000000012282,0] [APP: oim#11.1.1.3.0] java.text.ParseException: Unparseable date: "2013-05-24 00:00:00"
May it has some bug?
Thanks
Noraset.Could you please write down what you have given in ITResource?
May be you are giving some wrong value in IT Resource.
Have you made chnages to OID Prov Lookup. If no check this link :
Re: Problem with OID Connector
And give a try ! -
Problem in provisioning user from oim to active directory using ssl
hi,
problem in provisioning user from oim to active directory using ssl i am getting following error while provisioning user to AD.
15:18:12,984 ERROR [ADCS] Communication Errorsimple bind failed: 172.16.30.35:636
15:18:12,984 ERROR [ADCS] The error occured in tcADUtilLDAPController::connectTo
AvailableAD():simple bind failed: 172.16.30.35:636
15:18:13,015 ERROR [SERVER] Class/Method: tcProperties/tcProperties encounter so
me problems: Must set a query before executing
com.thortech.xl.dataaccess.tcDataSetException: Must set a query before executing
at com.thortech.xl.dataaccess.tcDataSet.checkExecute(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.util.tcProperties.<init>(Unknown Source)
at com.thortech.xl.dataobj.util.tcProperties.initialize(Unknown Source)
at Thor.API.tcUtilityFactory.getLocalUtility(Unknown Source)
at Thor.API.tcUtilityFactory.getUtility(Unknown Source)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.co
nnectToAvailableNextAD(Unknown Source)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.se
archResultPageEnum(Unknown Source)
at com.thortech.xl.schedule.tasks.ADLookupRecon.performReconciliation(Un
known Source)
at com.thortech.xl.schedule.tasks.ADLookupReconTask.execute(Unknown Sour
ce)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionActi
on.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown S
ource)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
can any one help.
Thanks and Regards,
praveen,Are you able to connect to AD over SSL through some LDAP Browser ?
Check the validity of Certificate ?
Does your certificate appear in the list ?
Maybe you are looking for
-
ADF Unable to filter / sort date column in table
Hi, I am using JDeveloper 11.1.1.7. I have a read only table inside a panel collection. One of the columns in the table is a date field. I have filterable and sortable properties set to true for all columns. Filter and sort property works for all col
-
How do I mount an external Firewire HD when booting into single user mode?
Hi, How can I mount an external Firewire Harddisk from the Darwin Console, once I have booted into single user mode? I'm trying to make a backup of all my files and then re-install my iMac G5 since it doesn't start the GUI anymore and I haven't gotte
-
I'm trying to add a page for some 1-2 minute videos. Working on the page, I keep getting the spinning ball, even when working with the text. What is the best way to display 4 movies or so on a page and is it better to use the .Mac Web Gallery and a l
-
ECC6 - Retail CO-PA merchadise categogy
Dear all, Please help, I implementing SAP-Retail ECC6, in CO-PA there are several characteristics given by the system <e.g. Customer, Product, Sales Order, Sales Ord. Item, Company Code, Site, Sales Org.> but I want "merchandise category" value which
-
Error when display "My trips and Expense "
Hello experts, I had configurated ESS and ADS . Our ADS intalled on the Portal server, ERP on the othere server. I have configurated ADS both with ABAP and JAVA for a basic authentication . When I click the button "Display/Print" in "My trips an