Provisioning (no sync) to an openLDAP resource

Hi,
I am using OIM 11g. We have a custom system we need to provision users to: this system uses a dedicated LDAP server (openLDAP) as a user datastore, so what we need to do is provision users from OIM directly to this LDAP.
The hiccup: openLDAP isn't in the connector list. Are the Novell eDirectory or the Sun Java System Directory connector somehow compatible?
thx in advance

Both connectors should work fine. I tested the Sun one a couple of years ago.
If you need to write some custom functionality this may be useful as a starting point: http://iamreflections.blogspot.com/2010/08/manage-ad-with-jndi-demo-tool.html
Best regards
/Martin

Similar Messages

Eclipse XQuery expression validation failed: The current configuration is out of sync with the XQuery resource in the repository.

I created a wsdl based on a dbadapter in jdeveloper, imported into eclipse and created the biz and the proxy and uploaded to oracle service bus, it works fine,
but happens now that i need to have a xsd and wsdl with business names and not table names, invented to create a xsd and wsdl file in jdeveloper
and then went to eclipse and tried t xquery tranformation, but when i add the replace in the message flow in the filed in Variable : body and Expression i look for the xquery and in the binding trying to put
$body/input parameter, get the following error [RouteNode1, Replace action] XQuery expression validation failed: The current configuration is out of sync with the XQuery resource in the repository.
what im doing wrong or its configuration
thanks in advance sonia

thanks
ok have created a table with only in column varchar2(1)
then the type object and the procedure to insert it works the proxy in the osb if i test it inserts
now in jdeveloper i created an xml file with
<?xml version="1.0" encoding="windows-1252" ?>
<vessel>
<barco>a</barco>
</vessel>
then i created a xsd based on this xml, and a wsdl based on the xsd
in eclipse created a xquery transformation and selected source as the xsd created in adf and target the xsd input parameter, dont know why in the purple ball of the input parameter it puts a ?, an a f.
then in the proxy xpath not writing anything in variable body and in the expression select the xquery and in binding select the parameter

AD Password Sync Connector: Configuring IT Resource Parameters

Hi,
In the installation guide of the AD Password Sync Connector there is a step (page 30) to configure the IT Resource (ADITResource) parameters: ADPWSYNCH Installed, ADPWSYNCH OIMFlag and ADPWSYNCH ADFlag. Even after a successful installation of the connector, these parameters were not created during the installation. Do they are created during the installation process or I have to create them manually?
If they area created during the installation, so the UDF USR_UDF_PWDCHANGEDINDICATION also has to be created, right? In my case, the USR_UDF_PWDCHANGEDINDICATION field also was not created.
Thanks,
Renato Guimarães.

That is the problem...
When I installed the connector I didn't get any error and I get a message the connector was installed ok. I think I will reinstall it.
Thanks,
Renato

Provision one OIM account to multiple resource accounts

Hello everyone,
We have a requirement to provision some OIM accounts more than once to the same target source. For example provision some user to two accounts in the target source, one normal account with the same user ID and another administrator account prefixed with "HS_". Is it possible?
Thanks in advance

It is possible as long as you check "allow multiple" in the resource object. Also, if you want to do auto-provisioning using Access Policy, you need to be on 9.1.0.2 BP12. Earlier release doesn't support provisioning to multiple instance of a same resource object using access policy.

Project Server 2013 - Remove user from resource pool via sync

Hello everyone,
has anyone managed to configure their Project Server 2013 box with a resource pool sync that will actually remove user from the resource pool (disable "User can be assigned as resource" or deactivate users) when the user is removed from the AD
group(s)?
Setup: Single box, SQL 2012 SP1, SharePoint/Project Server 2013 + PU March + CU April. 2 PWA instances, 1 in SharePoint and 1 in Project permission mode. Tried on 2 different machines (different setup, accounts, domains).
Proceedings:
Create AD user U, AD group G. Add U to G.
Go to PWA, setup resource pool sync with G, sync.
U is now in the resource pool, has no PWA permissions.
Remove U from G. Resync resoure pool.
U is still in resource pool, still a resource, still active, can still be assigned as resource.
Adding U back to G an repeating the whole spiel with a resource pool and a PWA group sync of G will result in U being added and removed from the user list (as expected), and U being added but not removed from the resource pool.
Having read
http://technet.microsoft.com/en-us/library/gg982985.aspx and
http://technet.microsoft.com/en-us/library/gg750243.aspx, there does not seem to be an omission on my part.
The first article states:
Note:
The corresponding Project Server User Account is not deactivated based on this synchronization. If the same Active Directory user is configured to synchronize with a Project Server security group, the Project Server user account will be inactivated when
that synchronization occurs. For more information, see
Best practices to configure Active Directory groups for Enterprise Resource Pool synchronization in Project Server 2013.
Unfortunately, this deactivation either does not seem to occur even with a PWA group sync or I misunderstood the article.
So, did anyone manage to setup their resource pool sync in a way, that new resource will be added, but also be removed from the resource pool?
Kind regards,
Adrian

Hi Adrian,
you tried to sync the same AD group that you used for the resource pool sync also with a Project Server permission group?
And on removal of the user of the AD group the project user/resource is not deactivated? Only removed from the group
Regards
Christoph
Hi Christoph,
even though I might have tried that before, I tried it again in several constellations. It didn't change anything. The the user will be properly added to and removed from the PWA group whenever I remove them from the AD group, the use will also stay active
(but cannot logon without permissions). However, the user will always remain in the resource pool, i.e. the "User can be assigned as resource." checkbox will remain unless it is cleared manually.
Having re-read the technet articles, none of the scenarios actually seem to descibe or address the process that I require, or maybe I'm just misunderstanding. Let me just try to outline the core issue:
Add user to AD group. Sync AD group with resource pool. User is now a PWA resource and PWA user.
Remove user from AD group, but do not deactivate/delete user from AD.
(Magic happens!)
User cannot be assigned as ressource in PWA.
So, is there anything to make this step 3 happen, or is it just not possible to sync users out of the resource pool anymore unless they are deleted/deactivated in AD?
Kind regards,
Adrian

Cannot remove a sync group and provisioning never stops

I try to remove my sync group in Azure DataSync , but get a message "Cannot remove this sync group because one or more databases are currently provisioning, re-provisioning, de-provisioning, canceling sync or synchronizing. TracingId=cc4af9b5-f6c5-2ca9-9412-acbaee44f87b"
My sync group is Sync Group ID: b9dfb07f-5415-487d-a6c7-c7caccf473b8_East / Subscription ID: 31e2bcf5-8078-4bf3-8898-ba771ea860ac
And before I try to remove it, it has a trouble that Provisioning never finishes.
The provisioning was adding reference new servers and the provisioning is continuing for more than 10 days.
While removing the sync group, I had deleted all reference database other than the hub database, and applied DeprovisioningUtil.exe to the hub database.
In the sync group, all databases were Azure SQL. The sync group didn't use sync agent.
The hub database seems to have no tables relating datasync like as "_dss" or "_traking" after I applied DeprovisioningUtil.exe.
I had no more idea to do other than waiting, any other ideas?
Best regards,

Hi Kamiyn,
Regarding to the error message and your description, it seems that you tried to remove sync group failed , I assume you only have one sync group, when you used DeprovisioningUtil tool, you should manually clean up all objects by running the deprovisioning
utility from the same folder where the Data Sync Agent gets installed.
Here is a similar issue about this error, you can refer to the post.
http://social.msdn.microsoft.com/Forums/en-US/d0c50049-4d20-447e-85f9-904f7d146a40/cannot-remove-a-data-sync-group-even-dropping-the-involved-databases-and-servers?forum=ssdsgetstarted
Hope it is helpful for you.
Thanks,
Sofiya Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to sync locations & resources calendar on iPad?

Hey
How can you sync/control your locations & resources calendar from iCal OSX Lion Server on your iPhone / iPad?
I don't think that it's possible.
Workaround is to create an user instead of a locations / resource calendar.
Thnx for answers /suggestions.
Philip

You would sync Outlook via iTunes on the computer. Connect the iPhone to the computer, make sure you have the latest version of iTunes running, select the iPhone in iTunes and it will display the Summary page. Select the Info tab, and there you would select what you want to sync calendar and contacts to. Make sure since this is the first time you have done a sync that whichever of the devices is new to the sync process has at least one unique contact/calendar event to get iTunes to prompt you for a merge or replacement. You can see this support document for help in setting up initial syncing. http://support.apple.com/kb/HT1296

Cannot remove this sync group because one or more databases are currently provisioning,

I have a problem with a SYNC group within my development Azure Database.
It been stuck in "processing" state last December and has never recovered.
I have since setup a new Sync Group to sync the data between my cloud database and my local database. The new Sync Group is working properly.
It bothers me that the old one is still out there, and I would just like to remove it, but I get the following error message:
Cannot remove this sync group because one or more databases are currently provisioning,
re-provisioning, de-provisioning, canceling sync or synchronizing. TracingId=fe9d220c-56c7-791f-ac0f-ea26989e02a1
Does anyone have any suggestions on how to delete the failed SyncGroup from Azure?

Hi jstevenson72,
How about using the DeprovisioningUtil tool? With DeprovisioningUtil tool , you can manually clean up all objects by running the deprovisioning utility from the same folder where the Data Sync Agent gets installed.
Besides any of the following can result in a failure to delete a sync group.
• The client agent is offline. Be sure that the client agent is online then try again. Reference :
SQL Data Sync Troubleshooting Guide.
• The client agent is uninstalled or missing.
If the client agent is uninstalled or otherwise missing:
1. Remove agent XML file from the SQL Data Sync (Preview) installation folder if the file exists.
2. Install the agent on same/another on-premise computer, submit the agent key from the portal generated for the agent that’s showing offline.
• The SQL Data Sync (Preview) service is stopped.
1. In the Start menu, search on Services.
2. Click Services in the Programs section of the search results.
3. Find the SQL Data Sync (Preview) Preview service.
4. If the service status is Stopped right-click the service name and select Start from the dropdown menu.
• A database is offline. Check your SQL Database and SQL Server databases to be sure they are all online.
• The sync group is provisioning or synchronizing. Wait until the provisioning or synchronizing process finishes then retry deleting the sync group.
And for Azure issues, I would like to recommend you post the question in the Azure SQL Database forum at
https://social.msdn.microsoft.com/forums/azure/en-US/home?forum=ssdsgetstarted. It is appropriate and more experts will assist you.
There is also a similar thread for your reference.
https://social.msdn.microsoft.com/Forums/en-US/d0c50049-4d20-447e-85f9-904f7d146a40/cannot-remove-a-data-sync-group-even-dropping-the-involved-databases-and-servers?forum=ssdsgetstarted
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Active sync : process selection values are not persistent

Hi,
Version: IDM : 6
I am attempting to provision oracle user accounts through IDM active sync process running against an AD LDAP server.
I want to use default forms/views supplied by IDM product, and configure active sync to use my custom workflow on create/update events.
I was not able to save my workflow for any of the events in process selection module of active sync configuration.
this is what i did..
======================================================
Active sync in (advanced mode) ->Process Selection
Process Mode
Use the event type to determine the process / workflow ? (enabled)
Create -> (from available workflows i select my custom workflow ) save
======================================================
after saving my changes , i again re-visited active sync-> process selection : to confirm my changes.
i do not see my saved workflow for create , but i see "default" as selected.
Is assigning custom workflows through actives syncs process selection allowed?
If Yes, How do i preserve my active sync-> process selection configurations?
Thanks
Edited by: idm_new_user on Jun 3, 2008 9:44 AM

Hi Chapo,
Thanks for trying to help me out...
Issue is not with assigning my custom form to my active sync process, it works that way...(i can achieve AD->IDM->ORACLE provisioning) using custom form/workflow...i now want to use, forms/workflow shipped out of box by IDM product to achieve provisioning of oracle accounts(Target) with Active Sync configured on AD (source).I am having issues with this configuration...i am not sure , it even works, out of box with out editing any forms/workflows !!!
what i now to achieve is a partial customization, i.e use forms supplied out of box by idm's active sync process, and ONLY use my custom workflows to do create/updates...
This is what i am trying to do, for an active sync configured on AD resource in advanced mode.
Find the AD LDAP resource under the Resources tab.
The check the box on the left hand side.
Now select "edit Active Sync process" from the drop down box.
In the active sync ->process selection view...select "use event type to determine the process/workflow ?"
and assign my custom workflows for create/update events...
after saving this, i revisit to confirm my changes...only to find that , they get lost/replaced by "default"
so, my question is how do i configure an active sync to use my workflow on create/update events...with out using my custom forms? if "process selection" module of active sync wizard is the way to do this, how can i save my configurations?

Access Policy and Resources -11gR2

Hi all,
I have create an Access policy in 11gR2, its working fine and as per requirement the Resource is getting provisioned / revoked properly.
In *11gR1* resources provisioned through the Access policy were used to be displayed / listed in the User's Resources tab, In *11gR2* the resources provisioned by Access Policy are not being displayed / listed in under the Accounts tab. is it the default behavior of 11gR2? or some bug? or I need to make any configurations to have it displayed here?
Regards

nothing special has to do for showing under Accounts tab. Have you created *'Application Instance'* for the Resource. You have to create Application Instance and run the "catalog sync' job. and once Application Instance is provisioned to user. It will be available under Accounts tab.
Follow 11gr2 doc for creating application instance
http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/resmgt.htm#CBBFAIEC

Calendar events on iphone won't sync to ical on Mac since iphone 7.0.2 upgrade

Help! Some events - but not every one - entered into new Iphone SW 7.0.2 do not sync back to the Calendar (v 4.0.4 from ILife 2009). I have tried rebooting my systems (computer and phone), as well as re-creating the problem by adding new test events, and I get the same result: calendar additions nor deletions entered from the Iphone do not sync to the computer. I do not have this problem with Iphoto or other apps in 7.0.2.

update to my original post: after searching since for the past 10 days - I did want to pass along to others with an iphone calendar sync problem the following resource:
Mac OS X: Resetting the SyncServices folder
http://support.apple.com/kb/TS1627
This is the preferred solution for problems with sync with calendar and other apps between iphone and MaciOS. This did solve the problem which developed that no items from iCal were copying to Iphone, such as new calendars I would add, but the original problem has not been fixed by this reset.

How do I take all the bookmarks on my android tablet and sync them with my desktop, if I've had to change my recovery key?

Anciallry to my profile During my attempts to when attempting to sync <pre><nowiki>1349979922766 1349979922789 Sync.Status 1349979922800 Sync.Status 1349979922809 Sync.Status 1349979922819 Sync.Status 1349979922819 Sync.Status 1349979925683 Sync.Status 1349979925704 Sync.ErrorHandler 1349979925705 Sync.Service 1349979925705 Sync.Service 1349979925706 Sync.SyncScheduler 1349979925706 Sync.Service 1349979925707 Sync.Status 1349979925707 Sync.Status 1349979925814 Sync.Resource 1349979925814 Sync.Resource 1349979925815 Sync.Service 1349979925815 Sync.Service 1349979925815 Sync.Service 1349979925815 Sync.Service 1349979925815 Sync.Service 1349979925815 Sync.CollectionKeys 1349979925815 Sync.Service 1349979925817 Sync.Engine.Clients 1349979925818 Sync.Engine.Clients 1349979925944 Sync.Collection 1349979925944 Sync.Collection 1349979925945 Sync.Engine.Bookmarks 1349979925945 Sync.Engine.Bookmarks 1349979926487 Sync.SyncScheduler 1349979926488 Sync.SyncScheduler 1349979926488 Sync.SyncScheduler the android device logs becoming corrupted on Desktop Computer A (windows 7), and a subsequent sync of the corrupt information to Desktop Computer B (OSX 10.6), I'm left with all 1400ish bookmarks residing on Mobile Device C (Android Tablet).
restore, I had firefox services generate a new Recovery Key, prior to my knowing that my bookmarks were stored in "C".
now, on the desktop, i see:
Sync.Service DEBUG Exception: Component returned failure code: 0x80070057 (NS_ERROR_ILLEGAL_VALUE) [nsINavBookmarksService.removeFolderChildren] Stack trace: BStore_wipe()@resource:///modules/services-sync/engines/bookmarks.js:1253 < <file:unknown> < Engine__wipeClient()@resource://services-sync/engines.js:498 < <file:unknown> < WrappedNotify()@resource://services-sync/util.js:142 < <file:unknown> < Engine_wipeClient()@resource://services-sync/engines.js:504 < <file:unknown> < resource:///modules/services-sync/service.js:1563 < <file:unknown> < WrappedNotify()@resource://services-sync/util.js:142 < <file:unknown> < WeaveSvc_wipeClient()@resource:///modules/services-sync/service.js:1548 < resource:///modules/services-sync/service.js:1246 < <file:unknown> < WrappedNotify()@resource://services-sync/util.js:142 < WrappedLock()@resource://services-sync/util.js:97 < <file:unknown> < _lockedSync()@resource:///modules/services-sync/service.js:1186 < resource:///modules/services-sync/service.js:1177 < <file:unknown> < WrappedCatch()@resource://services-sync/util.js:71 < <file:unknown> < sync()@resource:///modules/services-sync/service.js:1165 < <file:unknown> < <file:unknown>
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Beginning user-triggered sync.
DEBUG User-Agent: Firefox/15.0.1 FxSync/1.17.0.20120905151427.
INFO Starting sync at 2012-10-11 13:25:25
DEBUG Clearing sync triggers and the global score.
INFO In sync().
INFO Resetting Status.
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG mesg: GET success 200 https://scl2-sync623.services.mozilla.com/1.1/vq5tgzklyepycf5agigiay47ime5ytho/info/collections
DEBUG GET success 200 https://scl2-sync623.services.mozilla.com/1.1/vq5tgzklyepycf5agigiay47ime5ytho/info/collections
DEBUG Fetching global metadata record
DEBUG Weave Version: 1.17.0 Local Storage: 5 Remote Storage: 5
INFO Sync key is up-to-date: no need to upgrade.
DEBUG Fetching and verifying -- or generating -- symmetric keys.
INFO Testing info/collections: {"passwords":1349979572.28,"tabs":1349979636.47,"clients":1349979114.63,"crypto":1349974699.42,"forms":1349979571.23,"meta":1349975849.38,"prefs":1349975802.81,"bookmarks":1349976817.63,"addons":1349979226.66,"history":1349979571.65}
INFO Testing for updateNeeded. Last modified: 1349974699.42
DEBUG Refreshing client list.
INFO 0 outgoing items pre-reconciliation
INFO Records: 0 applied, 0 successfully, 0 failed to apply, 0 newly failed to apply, 0 reconciled.
DEBUG mesg: GET success 200 https://scl2-sync623.services.mozilla.com/1.1/vq5tgzklyepycf5agigiay47ime5ytho/storage/bookmarks?full=1&sort=newest&limit=1
DEBUG GET success 200 https://scl2-sync623.services.mozilla.com/1.1/vq5tgzklyepycf5agigiay47ime5ytho/storage/bookmarks?full=1&sort=newest&limit=1
DEBUG Resetting bookmarks last sync time
DEBUG Deleting all local data
DEBUG Sync error count has exceeded 3; enforcing backoff.
DEBUG Starting client-initiated backoff. Next sync in 2777931 ms.
DEBUG Next sync in 2777931 ms.</nowiki></pre>
arent as friendly to export, but i see similar complaints about crypto.

It sounds like your desktop profile is (still?) corrupt; it's failing to process the wipe on bookmarks. So let's be super thorough: we'll clean up the desktop, then reconnect so the Android device's data will replace it.
My suggestion is to do the following. Read all of the steps before you start. I recommend that your Android device is on wifi.
# On your Android device, go to Settings > Accounts & sync. Remove your Sync account. Your Firefox profile will be unchanged.
# On your desktop, create a new profile.
# On the new profile, assuming you want to re-use your Sync account, follow the instructions below.
# Re-pair your Android device with the new desktop profile, and wait for it to finish syncing before syncing the desktop.
Connecting to an existing sync account:
# Set Up Sync
# I have an account
# I don't have the device with me
# Enter username and password, choose "I have lost my other device"
# You'll get a dialog with a new recovery key. Choose "Change recovery key".
Let me know if you have any problems!

OIM 9.1.0.2 Resource Profile Query

Hello
I need to get the usr_key or any info on the users in OIM that have a certain condition. I have a number of OID resources for users that have a status or 'provisioned' but when looking at the resource tasks the system validation is set to 'cancelled'. Due to this, updates are not flowing to these users. I am looking through the tables to try to find the resource task list and the status info so I can find the system validation cancelled and location those users. Does anyone have a query to search through and find all users with system validation = canceled and resource status as provisioned? Any help you can give would be appreciated.
Thanks
Nick

I'm positive there's a great way to do it with SQL, but you'll need to look at 4 tables:
1) OBJ (Objects) - Here you are looking in OBJ_NAME for 'OID User', once found get the OBJ_KEY value for the row.
2) OST (Object Status) - In this table, you can find all the statuses for the OID User resource based on the OBJ_KEY value. Look for the applicable ones and get the OST_KEY value for each row.
3) OIU (Object Instance for Users) - Now you can query this table for all results where OST_KEY equals the desired values as found in step 2.
4) USR (Users) - Here you can get the User ID's (usr_login), User Key (usr_key) or any other value for users to help with the query.

OID manual provisioning from OIM

Hi,
while provisioning users in OIm and giving them certain entitlements, when I provision a user with OID It resource,it gets added to OID automatically. I want to do this provisioning manually....that is approval based
The goal is to give required access to a new User in the system by following standard approval process and manual creation of the user in respective target systems
how this can be achieved
following reports need to be generated:
•     User creation was approved/rejected by Manager.
•     User creation was approved/rejected by Manager.
•     User creation was approved/rejected by Manager.
Edited by: Chhavi Saluja on Jan 31, 2010 10:17 PM

The user in your it resource, do you have it lowercase? Also, does the user exist in your target?
-Kevin

[OIM] Error in Direct Provisioning (with auto save form) - GTC DB App Table

Hi,
I am getting an error when setting up direct provision of a GTC DB App Conn using OIM access policy (and group membership) or through manual provisioning with prepopulate and auto save form.
Manual provisioning with prepopulate ONLY (not with auto save form) WORKS!!!
Some information about my OIM config:
- Prepopulate adapters are set up on both forms (parent and child)
- "Auto prepopulate" and "Auto save form" are set up at Process Definition
- For direct provisioning, I have created an access policy with an associated group which has a membership rule
What it is working:
- Provisioning manually, using prepopulate adapters only, not auto save form. Both tables are updated properly
- All *3 tasks are called and finished with status=Completed*: "System Validation", "Create User" and "Child Table UD_<connector child table name>_US row Inserted"
Testing direct provisioning:
- I have tested adding the resource manually with prepopulate and autosave form configured, and also through access policy/group membership. The error is the same on both tests
- The resource is displayed as provisioned and it is created an entry in the parent table of the resource, but not on child table
- I also observed that only: "System Validation" and "Create User" tasks were executed (status=Completed). But it is missing the task "Child Table UD_<connector child table name>_US row Inserted"
- The error log info displays only an error regarding to UGP table (Groups info) but I am not sure if that is the cause of entry creation on child table.
It seems the SQL stmt tries to get ugp_name (group name) using ugp_key but that has null value.
"SELECT ugp_name FROM ugp WHERE ugp_key=java.sql.SQLSyntaxErrorException: ORA-00936: missing expression"
Note: When testing manually (without auto save form), I got "SELECT ugp_name FROM ugp WHERE ugp_key=1" which it is the same SQL stmt but the value is provided.
My guess:
- It seems that error is aborting the whole execution process so "Child Table UD_<connector child table name>_US row Inserted" task does not run, even though previous tasks are finished with the status=Completed. Consequently, the entry is not created on child table.
Please, any guess or help would be very helpful. In case nothing works, I guess I will have to create and customize a "Update child Form" task as an workaround which would be called after "Create User" task.
Regards,
Hugo
My environment:
- Windows 2003, WebLogic 10.3.0.0, OIM 9.1.0.2 BL4, Oracle 10g, Java 1.6, DB App Table Connector 9.1.0.2 (from October 2009)
- Target Resource: Parent and Child Table (Oracle 10g - the same OIM DB)

An update:
I solved that error about "ORA-00936: missing expression" applying OIM 9.1.0.2 BP05. That was not impacting my issue regarding direct provisioning with auto save form and child form.
So please if anyone can confirm:
- Can I set up prepopulate adapters on child forms AND also use "auto save form" on GTC DB App Table connector?
If not, any suggestion?
Regards
Hugo

Provisioning (no sync) to an openLDAP resource

Similar Messages

Maybe you are looking for