Proxy in BPM

Hi,
I am doing a BPM which has proxies. In SAPR3 side, I have defined inbound interface for proxy generation in a namespace. But in XI interface mapping, I am using target message to R3 as Abstract interface which has message type defined in different namespace. When generation of proxy, how can I link message type in XI to message type in R3.
There is an xml namespace in message type. There I have given sap message type namespace for XI message type. And the message type names in XI and SAP are same.Is this the right way to link?
Thanks,
Deno

Hi,
I have similar situation where BPM is calling proxy in R/3. It was working fine but we had change in servers and all the settings were restored but now the BPM is not working properly. The contents in BPM messages are blank. The BPM process is working fine but it is not passing data into R/3 (target) system. I already tried SWWL, SXMB_MONI_BPE, SPROXY. Checked the queues, checked the connections, settings. Don't know what else could be wrong. Any suggestions on debugging BPM?

Similar Messages

ABAP Proxy and BPM with message maping

Hi all,
I have a scenario like :
ABAP Client Proxy ( synch )
-> BPM ( to retriggr SOAP call and raise alerts with error and reponse back to Abap client )
-> message mapping
-> SOAP ( synch )
1. What can be the issues with this scenario ?
2. How can I return response and excetion back to ABAP client from BPM ?

>
> As per design guidelines for consistent processes -
> we need to do all the error handling and alerts in
> BPM.
You mean you are planning to use a BPM for all Interfaces just because someone told so? Why use a BPM when there is no need for it. If you have a Business Process that demands a BPm then yes use it, but for this sceanrio, you can use Fault messages to propaggate the error back to the R3 system, and use the Xi alerts ( without BPM ) if a runtime error occurs etc.
Is there some Business Process Involved here? What is the exact requirement?
Regards
Bhavesh

** Is it possible to call a Proxy from BPM ?

Hi friends,
Our requirment is to take the thru JDBC (data required to create Sales Order) and call the Standarad BAPI 'BAPI_SALESORDER_CREATEFROMDAT2'. Since BAPI is not able to handle multiple sales order, we want to use this BAPI in inbound proxy and want to call from BPM.
Since we want to call continuous BAPIs one by one, (Sales Order, Delivery, Invoice) we want to design this scenario using BPM.
I understand that we are not able to create proxy for Abstract Interfaces. BPM only understands abstract interface. In this case, how do we call proxy from BPM? Is there any other possibility?
Kindly reply friends.
Kind Regards,
Jegatheeswaran P.

hey,
yeah its possible..
Check this.
/people/vanita.thareja2/blog/2006/05/23/bpm-sending-message-asynchronously-and-getting-the-response-from-synchronous-system-using-abap-proxies
These replies too..
Proxy in BPM
BPM file to ABAP proxy
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 5:32 AM

Build delay in messages to abap proxy without BPM / mapping

Hi everyone,
The abap proxy is receiving messages from PI, is having errors when receiving big loads of messages via PI.
The proxy lock's a table causing the next message to run in error.
The interface is not using BPM or a mapping.
My question is:
What are the possibilities to configure a delay in PI ? (not using a mapping or BPM process)
The abap proxy need some time to process a message before it receives the next one.
Br,
Roy

Hi,
>>>The proxy lock's a table causing the next message to run in error.
if you use async messages with fault messages correcty you can
restart those abap proxies just like IDOCs - and you can schedulerestarting that too
so this is nothing bad - just schedule the restarting and they will get processed
Regards,
Michal Krawczyk

How to call a webservice proxy from BPM application?

Hi All,
Consider a case where I want to use external webservice in my BPM application. What is the best approach to achieve this.
1) What if I create a web service proxy and wants to use in the BPM app. How can I use this?
2) Which component do I need to use "Web Service" component or "Third Party Adapter" component from the component pallette?
3) If I use directly the wsdl in the "Web Service" component will it cause any issues in the future.
I searched in the net and the docs, but it didnt find the proper solutions for this.
Please provide your comments on this.
Thanks.

First of all a java proxy would not help much here - there is no use for that in SOA suite especially when it comes to using the JCA adapters. Instead reference the WSDL directly in SOA suite but there is a caveat - see my response below
1) What if I create a web service proxy and wants to use in the BPM app. How can I use this?
Dont create a WS proxy. Instead reference the WSDL and call it using a Service Task from the BPM process
2) Which component do I need to use "Web Service" component or "Third Party Adapter" component from the component pallette?
Use the WSDL directly and select "Web Service" from the component palette
3) If I use directly the wsdl in the "Web Service" component will it cause any issues in the future.
Yes there are lots of issues referencing a WSDL directly. Instead upload the WSDL reference to SOA-MDS and then use the oramds:// reference to the WSDL. This will ensure the composite does not break when the WSDL is not available. JDeveloper also goes into a tizzy when the WSDL is not up.
thanks,
Vikram

File 2 Proxy Sync - BPM - Mapping

Hi Guys,
I am doing file 2 proxy sync interface. I am getting 2 files from 2 locations. First file contains group of records and second file contains the total records in the file 1.
File 1:
File :1
GroupNo    InvoiceNo     InvoiceDate   InvoiceAmount
GD2000      XXX            XXXXX         XXXXXX
GD3000      XXX            XXXXX         XXXXXX
GD4000      XXX            XXXXX         XXXXXX
GD2000      XXX            XXXXX         XXXXXX
GD3000      XXX            XXXXX         XXXXXX
GD4000      XXX            XXXXX         XXXXXX
GD5000      XXX            XXXXX         XXXXXX
GD5000      XXX            XXXXX         XXXXXX
GD3000      XXX            XXXXX         XXXXXX
GD2000      XXX            XXXXX         XXXXXX
GD4000      XXX            XXXXX         XXXXXX
File 2:
GroupNo     TotalRecords         TotalAmount
GD2000       3                            XXXX
GD3000       3                            XXXX
GD4000       3                            XXXX
GD5000       2                            XXXX
Here, in file 1 GD2000 group having 3 records and in file 2, total records mentioned as 3. If in file 2, GD2000 total records mentioned as 2 then it should stop the process.
I have collected these two files by using BPM, i need help in designing the mapping for this condition.
Also advise me, whether i need to write a udf or not.
Thanks in Advance
Regards
Bala

Here, in file 1 GD2000 group having 3 records and in file 2, total records mentioned as 3. If in file 2,
GD2000 total records mentioned as 2 then it should stop the process.
I have collected these two files by using BPM, i need help in designing the mapping for this condition.
Also advise me, whether i need to write a udf or not.
No need of UDF...
Since you have collected the files in BPM....now put a Switsh step in your BPM just after you have collected your Files.
Put a condition in your Switch Step to check if GD2000TotalRecords = 2......this should be in the condition branch of your BPM and the message included here should be that of File2.....and in this branch put a Control Step with action as Cancel Process....this condition will check if GD2000-TotalRecords is 2 and if yes then then the process will be cancelled...if not 2 then BPM will continue..
Check this out and let me know.
Regards,
Abhishek.

XML file to Proxy Scenario with BPM - ID Steps

Hi Guys,
Any one can help me to find about the scenario XML file to ABAP Proxy with BPM, ID steps please. Any link or logical routing, receiver determination and interface determination idea. Please correct me,
I have created Business Service as sender to send one xml file to BPM, BPM is sending a message to SNC system. I have created 2 receiver determinations, but I am confusing in interface determination, where to declare OM?
Please can any one respond bit quicker.
Thanks in advance
Regards
San

ES Repository
                     *Service Interfaces*
Create one outbound service interface for XML file.
Create one Inbound synchronous Interface for SNC system.
Create one Abstract Asynchronous interface ,same message type as you used for outbound service interface .This is for Integration process receive step.
Create one Abstract async interface for receiving the response from SNC system in Integration process.
Create one Abstract synchronous interface to be used in the Integration process for Send sync step.
Create on inbound asyn service interface for sending the response from integration process (received from SNC system) to the Receiver System.
              Operation Mapping.
Create an Operation Mapping using Abstract sync interface and inbound syn interfaces.
              Integration Process
start--->receive Step---->send Synchronous step----->send step.
Create two container elements
first with abstrat async interface for the XML request.
second for abstract asyn interface with the XML response structure (asyn receiver system structure)
In the send sync step select your abstract syn interface from the F4 help.and select the corresponding request and response message from the container element you defined earlier.
Integration Directory.
Create one sender File adapter Communication channel for XML file reading.
Create two receiver communication channel for sync system(receiver XI adapte for ABAP PROXY) and other for asyn receiver system .
Create 3 receiver determination
1.from sender to Integration process.
2.from Integration process to SNC system.
3. from Integration process to Asyn Receiver System.
Create 3 Interface determination.
Specify Operation mapping while you are creating interface determination from Integration Process to Syn BS.
Create one sender agreement
Create two Receiver agreement.
Regards
Kubra Fatima.

BPM + PROXY + Fault Message

Hello
My scenario is JDBC -> BPM <-> Proxy
I developed a BPM has a step-type <SENDER> that is synchronous.
Information on the above step:
. The message interface used an output, an input message and also a Fault Message.
. I'm calling a proxy in the ECC and runs an exception if an error occurs in the application (inside the proxy).
. This exception is returned to the BPM and I run a <block> to handle the exception.
My need is to capture the contents of the exception in the BPM and send this text to another application.
How do I recover the contents of the exception returned by Proxy in BPM?
Thank you,
Aroldo

Hi, it is not supported in the meaning that the payload of the fault message is not returned to the integration process, so that's right Baskar. The only thing possible is to trigger exceptions for fault messages, see [Sending Messages from Integration Processes Synchronously -> Procedure -> Specify Exceptions|http://help.sap.com/saphelp_nw73/helpdata/en/43/6211331c895f6ce10000000a1553f6/content.htm].
Possible solutions:
If it is a custom proxy you could change the behavior so that no fault messages are triggered. Instead you return the error message in the payload structure of the response.
If it isn't a custom proxy you could create a custom proxy wrapper with a separate structure for exceptions in the response. Call the implementation of your desired proxy in the wrapper implementation, handle the exception and return the exception contents in the separate structure of the response.
Or you could try to create a data type enhancement for exception contents for the response message, create a proxy from the enhancement, and implement the OUTBOUND_PROCESSING method where you copy the exception messages to the structure of the data type enhancement.
Regards, Martin

Bpm send abap proxy problem

BPM send abstract interface sd025proxy (bapa proxy).
in sproxy only message interface outbound and inbound can create proxy, abstract interface can't create proxy.
so how can I handle this in ID?

Proxy communication needs direction....abstract interface does not have any direction.
BPM send abstract interface sd025proxy (bapa proxy).
BPM will send abstract interface...fine....however when you run config wizard for BPM --> SAP communication include the inbound message interface corresponding to your proxy wherever there is a reference for target(receiver) MI....create a new MI in IR accordingly.....this is the only option available.
Regards,
Abhishek.

XI BPM : Help Needed

Hi All,
I am passing internal table from SAP R3 to sapXI ( BPM ).
It has aroud 2000 records. Now i want to pass these records to the legacy system synchronously in the batch of 200 records.
So how do i proceed? I mean how do i loop at the internal table in bpm?
Please do the needful.
Smita.

Hi,
You can achieve this with the help of ABAP proxy. Your bpm Collect pattern will be collect based on the Message.(Message Dependent Loop)
So you will be having Sender ABAP proxy which will send two messages to XI.
1) Actul Data with 200 records
2) Stop message to indicate the BPM that this message is last one.
In the BPM it works with the concept of Fork and it will keep on recieve two messages. WHen you get stop message it will come out from Fork step and write into File. Till stop message , your BPm will keep on collect all the messages.
And in configuration you will be having 3 receiver determinations.
1) Actual data to BPM ( ABAP proxy to BPM)
2) Stop Message to BPM(ABAP proxy to BPM)
3) BPM to legacy system
To more on this-
http://help.sap.com/saphelp_nw2004s/helpdata/en/84/e8763c997fda50e10000000a11405a/frameset.htm - here you go t oIntegration Proces(ccBPM)->Examples and Useage Cases->Example: Collecting and Bundling Messages - One Interface from the left menu
Hope this helps,
Regards,
Moorthy

Abstract Interface for IDoc Proxy

Hi All,
Do we need to make Abstract interfaces for IDocs and Proxys too if we want to use them in BPM?
XIer

Aamir,
I agree with u that we can't create proxie's for Abstract interfaces. But consider the case I want to call Proxy inside BPM, is this possible?
Yes its possible. As I mentioned in my previous replies for IDOC's .Similarly for Proxy receiver Interface determination we need to give Actual Inbound Interface name instead of Abstract. MI_Proxy_Abs --> use MI_Proxy_IB . Provided both the interfaces has the same structure.
I hope it clears!!!
Best regards,
raj.

BPM/File Content and Dynamic File Name

Bit of a double whammy here!
I am running a BPM : R/3 Proxy > XI > BPM > File Adapter (x4)
All working to a point.....
The file I receive splits into two files, then I pass a Count file - number of records to a separate file and then a file that simply says "ready" on completion. Four files are:
Data file, Lookup (values and descripton for legacy), Count file and Ready file.
To top this off, it will be run for 12 separate countries so hope to use the country code to add to the file naming - so generating 48 files (if successful). Data_GB.dat, lookup_GB.dat, Count_GB.dat and ready_GB.dat etc....
The first three, I can do (with maybe a little help!), I have looked at the use of dynamic file naming and think I can do this, however, the count file uses the initial file sent, but the ready file passes across the word "ready" to destination file. How can I utilise the dynamic naming convention if I do not use the original file for this?
Also, the "ready" file is being created but it is empty. It is okay using the the File Adapter, but when I convert it, the file is empty (but still created!) IN sxmb_moni, it is showing correctly but once the file content conversion happens, it is empty!
Any thoughts?

Thanks Bhavesh.
Time Stamp Status Description
2007-05-08 17:43:57 Success Message successfully received by messaging system. Profile: XI URL: http://host.fqdn.net:55000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2007-05-08 17:43:57 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-05-08 17:43:57 Success Message successfully put into the queue.
2007-05-08 17:43:57 Success The message was successfully retrieved from the receive queue.
2007-05-08 17:43:57 Success The message status set to DLNG.
2007-05-08 17:43:57 Success Delivering to channel: EPIW_FTP_Receiver_EmployeeReady
2007-05-08 17:43:57 Success MP: entering
2007-05-08 17:43:57 Success MP: processing local module localejbs/CallSapAdapter
2007-05-08 17:43:57 Success File adapter receiver: processing started; QoS required: ExactlyOnce
2007-05-08 17:43:57 Success File adapter receiver channel EPIW_FTP_Receiver_EmployeeReady: start processing: party " ", service "XE_DEV_3RD_EPIW_001"
2007-05-08 17:43:57 Success Connect to FTP server "ftp.ftp.ftp.ftp", directory "/ECS/Target"
2007-05-08 17:43:57 Success Write to FTP server "ftp.ftp.ftp.ftp", directory "/ECS/Target",   file "xi_epiw_ready20070508-174357-635.dat"
2007-05-08 17:43:57 Success Transfer: "BIN" mode, size 156 bytes, character encoding -
2007-05-08 17:43:57 Success Start converting XML document content to plain text
2007-05-08 17:43:57 Success File processing complete
2007-05-08 17:43:57 Success MP: leaving
2007-05-08 17:43:57 Success The message was successfully delivered to the application using connection File_http://sap.com/xi/XI/System.
2007-05-08 17:43:57 Success The message status set to DLVD.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:EPIWReadyFile xmlns:ns0="urn:com.xerox.esap.hr.epiwextract">
<recordReady>READY</recordReady>
</ns0:EPIWReadyFile>
Transfer: Binary
File Type : Text
File Content Conversion:
Record Set Structure: Detail
Detail.fieldSeparator     ,
Detail.endSeparator     'nl'
It maybe something simple...
Hopefully you can help : )
Thanks
Barry

Proxy_RFC_Proxy with BPM

Hi Experts,
i have scenario like Proxy-RFC-Proxy with BPM.
i am sending request from proxy it goes to RFC,while i am checking in the SXMB_MONI in the sender backend sap system it is showing status like schedule , how to solve this problem ,please suggest me.
Regards,
Sudeepth

Hi Experts,
In this scenario I am getting success flag , some times it is getting outbound status is Scheduled and some times Q status is showing stop symbol .From this status i am getting these kind of error in the PI system SXMB_MONI is
com.sap.engine.interfaces.messaging.api.exception.ConfigException: SLDAccess set to true, but not available.
I was check all need full checking in the SLD and also Tcode SLDCHECK , all connections are clear and active .
Still i am facing the same problem in the SXMB_MONI in PI system.
Please suggest me how to resalve the problem .
Thanks in advance.
Sudeepth.

Synch proxy

hi all , i would like to do Synch proxy scenario,
can anybody tell me how can i send a response message from the proxy method/program?
If i want to call this proxy in BPM, how can do it?
(What are the procesiing steps?)
Thanks in Advance.
Kumar

Hi,
Since You need to send the response message from Proxy then you should use syn inbound proxy because first you will send the data from XI to proxy using inbound proxy and then R/3 will send the response message.
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Regards,
Sarvesh

Clarify the queries, please...

1. Explain about Mappings (ABAP, Java, XSLT, and Message) merits and demerits? In which situations exactly we will use Java, ABAP and XSLT Mappings?
2. What is Correlation? Where it comes into picture?
3. Is there any Debugging facility available in XI?

HI,
Java Mapping
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fxi%2fxi-desi
gn_configuration%2FFileValidationsinSAPXI-ACaseStudy.pdf
or
FCC https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/99593f86-0601-0010-059d-d2dd39dceaa0
http://www.cafeconleche.org/books/xmljava/chapters/ch09.html
http://www.cafeconleche.org/books/xmljava/chapters/ch06.html
Check these blogs for reference..
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
XSLT Mapping
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
/people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
XSLT Mapping with java enhancement
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
Difference in using java,xslt,message mapping
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
/people/stefan.grube/blog/2006/10/23/testing-and-debugging-java-mapping-in-developer-studio
/people/thorsten.nordholmsbirk/blog/2006/08/10/using-jaxp-to-both-parse-and-emit-xml-in-xi-java-mapping-programs
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
/people/amol.joshi2/blog/2006/03/10/think-objects-when-creating-java-mappings
XSLT Mapping
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
/people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
XSLT Mapping with java enhancement
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
ABAp
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Monitoring for Processed XML messages in ABAP Proxy - /people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
message monitor and troubleshoot -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f2a9fa2-0a01-0010-32ac-d281db722b86
Correlation
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
Regards
Chilla..

Proxy in BPM

Similar Messages

Maybe you are looking for