Proxy services on secondary IP interface
I've been playing with explicit proxy mode in ACNS 4.1.1 which works
fine. I'd like to be able to get the proxy services to listen on secondary
IP interfaces - it doesn't seem to do this by default as any tcp sessions
that try and talk to port 80 on the secondary IP interface get rejected.
I found bug ID CSCdw91108 and TAC can probably give you a workaround.
Similar Messages
-
How to control File read Proxy Service when it is polling from folder?
Hello all,
In my current requirement we are receiving xml's through one folder(LOCAL) from source side.we are picking those xml's by proxy service PS1 as file transport for every 10 sec and configured that folder path.In PS1 message flow we put on routing action to one bussiness service,that business service sending those xml's to one MQ.
We already created this interface but the issue is source side they plan to change that folder and also they want to stop this service(folder to MQ) sometimes based on synarios.That folder will be delete or if exist proxy wont read messages from that folder.
But proxy is still looking for that folder in Test ENV on Unix system then it gives error beacuse of unix folder structure is different,proxy unable to create that folder in unix system.it is creating in windows.
Now we want to control that service when the folder is ready that time only proxy will activate otherwise not..i.e like if condition "if cndtion is satisfied PS1 starts the polling from that folder else condition should be work.
How can i control PS1 service?
Is there any chance to control by using another proxy?
Experts please guide me..
regards
venuHi Terry,
According to your description, my understanding is that you don’t want the yollow bar notification to display when you open Access documents.
This issue seems to be about the client application. Please compare the followings with the things that you did:
1.Open the documents
2.Click File->Options->Trust Center->Trust Center Settings
3.Click Protected View, unselect ‘Enable Protected View for originating from the Internet’
4.Click Message Bar, select ‘Never show information about blocked content’
5.Click Macro Settings, select ‘Disable all macros without notification’
In addition, as this issue is about Office, I commend you create a new thread in Office forum, more experts will assist you with this issue.
Office forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Proxy Service Deployment in OSB
Hi
I Have a requirement where i wnat to deploy same Proxy services with deferent versions. i dont wnat this to be reflected in my service name. so what i am doing is
creating deferent folders like v1, v2 and deploying the same service in bothe thse folders having endpoint URI deference in v1, v2.
i am bit curious to know if there is any impact to run time proxy instances as bothe of them are same. i just want to confirm before hand that there are no conflicts in run time behaviour of Proxy service.
any sugestions and answeres well appriciated.
thanks in advance
mrHi mr,
I don't think you'll be able to do this in the same OSB instance, although I may be mistaken. If both proxy services have the same name, then OSB will try to export both of them with the same name and there won't be any way to distinguish between them. Is the interface the same between the versions? What do you expect the behavior to be, i.e., which service will get called when Tuxedo calls the service?
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
XSLT transformation in OSB Proxy Service
Hello, I am trying to modify the answer from a WebService using an XSLT transformation in an OSB Proxy Service, but I am unable to do so. Here it is the content of the answer's body it receives:
<ns0:getRecountUnitMovementsResponse xmlns:ns0="http://www.grifols.com/gds/interfaces/types/">
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>4</ns4:GrpId>
<ns4:MovementType>960</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>10</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>1</ns4:GrpId>
<ns4:MovementType>913</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>15</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>2</ns4:GrpId>
<ns4:MovementType>913</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>21-00001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>25</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>3</ns4:GrpId>
<ns4:MovementType>959</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>50</ns4:Quantity>
</ns1:result>
</ns0:getRecountUnitMovementsResponse>
And what I am trying to do is replace all the "/com/grifols/gds/webapp/inventoryCount/units/queries/common/" for "http://www.something.else". I have succeeded replacing it if the attribute name is "xmlns" instead of "xmlns:ns4". However, that ":ns4" changes everything and I can't get it to work. Does anyone know how to do so?
Thank you in advance. Don't hesitate to ask me for more information you may need.
JordiBy the way, this is the XSLT transformation that works fine if we remove that ":ns4" from the attribute name:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:source="/com/grifols/gds/webapp/inventoryCount/units/queries/common/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
version="2.0">
<xsl:output method="xml" encoding="iso-8859-1" indent="yes"/>
<xsl:template match="source:*">
<xsl:element name="{local-name()}" namespace="http://www.something.else">
<xsl:apply-templates select="@*|node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet> -
I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish -
Hi,
I have a simple Proxy Service which consumes messages from a remote endpoint queue (source queue). The Proxy Service simply routes consumed messages to a Business Service which puts messages into another remote endpoint queue (destination queue).
When I test passing a message to the Proxy Service using the OSB's Test Console, the Proxy Service routes the message to the Business Service okay where the message is then placed into the remote endpoint queue (destination queue) as expected. But, if I put a message into the remote source queue, I can see that the message gets consumed by the Proxy Service but the message remains as 'pending' and, either the Proxy Service does not route the message to the Business Service or, the Business Service does not put the message into the remote destination queue. What could the problem be?
Thanks in advance for any help on this.Hello,
Still looking for an answer to this.
Scenario:
When enabled, OSB Proxy Service removes any messages placed in remote endpoint URI queue, but it seems the messages do not flow within the Proxy Service's message flow itself. When the Proxy Service is enabled, the messages in the remote queue get removed but are seen to stay in a 'pending' state. When the Proxy Service is disabled, the messages get put back in the queue. What are the possible reasons as to why messages would not get processed within the Proxy Service's message flow? All the message flow does is, route the messages to a Business service which then sends the messages to another remote endpoint URI queue.
PS: When a message is injected into the Proxy Service via the Test Console, the message flows/routes to Business Service okay without problems so I assume that the problem must lie in the inital remote queue/Proxy Service interface somewhere. Maybe permissions or transaction related issue? But I can't see any hints to anything wrong in configurations or server(s) logs...
Thanks in advance for any help on this. -
JMS Biz & Proxy Services Using OSB & SSL
We have a potential requirement being enforced upon us which states that our communication to another system using a JMS proxy service should be using SSL.
Has anyone done this before using OSB?
There is a "Use SSL" tick box on the proxy and business services, but I think this is purely for authentication and not transport - but I could be wrong as its not an area I know that much about.
We're pushing for an IPSEC VPN link as that makes much more sense, but in the meantime I thought I'd ask if anyone had done any JMS + SSL work using OSB.
Thanks,
PeteManoj, Thanks for your reply.
Actually the other system is OSB!!
It's a government system we're talking to but in the interests of open-ness, we cannot use OSB->OSB out of the box interfaces such as SAF etc, as that isn't an open enough interface and users of the interface who don't have OSB may be disadvantaged! Something like that anyway! SAF would be a perfect option for this interface, but .....
What we've been so far is that all communication via JMS must be SSL based. But - t3s is not supported on this interface, so the SSL negotiation must be handled by a hardware device or something else.
We think we've found BigIP load balancers do the job, but that's a large cost as we don't have those in our current infrastructure.
We don't have much SSL communication apart from https, so I don't have a whole lot of experience with it and I just wondered if there was any OSB feature I'm missing, or something you can do in plan java code to get JMS communicating via SSL.
Pete
ps:A standard IPSEC VPN would do the job too, which we're going to try to push for, then, you just use the jms:// url to an address and the security is via the VPN. -
OSB Exposing Proxy Service as Web Service to external consumers
Hi all,
I am trying to expose my proxy service which I have defined in OSB11g to be exposed to external applications and consumers, rather than listening to a queue or using a business service to receive the traffic. What would be the best approach and practice to this issue? Needless to say that since I mentioned this proxy needs to be exposed as web service, I'll be expecting back response. The endpoint that I am getting as result of creating this proxy comes to be in following format:
/<project_name>/Services/ProxyServices/MyProxy
This fine for apps deployed on the same domain, but not if they are not deployed on the same domain.
thanks in advanceFrom the information shared you, looks like you want to create a SOAP over HTTP webservice in OSB which will be the one exposed to external consumers.
1. So to create such a Proxy service, you will need to define the interface using a WSDL (as mentioned by Pierluigi) first.
2. Once done, you can create a Proxy (SOAP/HTTP) based using the above WSDL. Then implement your business logic in the message flow.
3. As a part of the configuration, you can define the context root of the service. (by default you might be getting /<project_name>/Services/ProxyServices/MyProxy)
You can customize as required, for e.x change this to /services/MyProxy
4. The final URL that can be used to access the above proxy will be as follow:
http://<hostname>:<port>/services/MyProxy for HTTP
https://<hostname>:<port>/services/MyProxy for HTTPS accordingly.
Depending on the way your domain is configured (managed servers) you can change the hostname and port.
So irrespective of where this service is deployed, you should be able to access it.
Do let me know in case my understanding is incorrect.
Thanks,
Patrick -
Java.lang.OutOfMemoryError when editing a routing note for a Proxy Service?
Hi,
Does anyone know why I am getting a java.lang.OutOfMemoryError in the AqualLogic Service Bus logs which freezes the browser (IE) when I try to edit a route node of a proxy service? I can change the name of the node but when I try to edit the node itself, the interface freezes and the out of memory thrown by the Service Bus. I have tried restarting the server etc..... The java memory allocated should already be adequate as it is set to 512Mb. All I can think of doing next is to uninstall the Service Bus and reinstall.
The logs I am getting can be seen below.....
Welcome, weblogic Connected to : servicebus Home WLS Console Logout Help AskBEA
weblogic session Created 9/01/08 13:46 No Conflicts 3 Change(s) 1 Active Session(s)
The source of this error is com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: java.lang.OutOfMemoryError at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:699) at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:268) at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107) at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:288) at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:427) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:708) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:720) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:183) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:186) Caused by: java.lang.OutOfMemoryError
Thanking you in advance for any help/insight.Okay, I fixed the "Incompatible initial and maximum heap sizes specified" issue now. The problem was that in the lh.bat script the parameter -Xmx128M was hardcoded and overwrote my own -Xmx setting.
I now set JAVA_OPTS to "-Xms1400m -Xmx1400m" which is the maximum that Java accepts without complaining about too little memory. However, I still get the OutOfMemoryError and in addition to that I now also get this error:
com.waveset.util.Shutdown: Sorry! This repository has been shut down by an administrator. Please try to get another instance.
I've googled already but found only two sites and those weren't really helpful. So, any help is very much appreciated!
Thanks,
David -
Hi I have a scenario --
1. Pandox System(queue) ------> OSB [ ProxyService]-------->Seibel System(queue)
. Is the above scenario possible in OSB ? If yes , then how ?
. Should I go for JMS Bridge ? No ? Yes ? Why?
Note: What would be the end point URIs in the Proxy Service if the systems are non-weblogic like Pandox and Seibel ? Will it require any extra configuration any where in OSB ?OSB can interface with JMS/MQs.
You can configure your proxy service/business service JMS URI of the pattern if using JMS
jms://localhost:port/QCFJNDI/QJNDI
For MQ you can use the MQ transport or create Foreign JMS servers depending on your version of OSB.
Refer OSB user guide for further details on MQ transport etc. -
Guys,
I have a Proxy service that recieves a file content in Binary64 field present on the request body type.
I need to write this content present inside the Binary 64 to a file.
My approach was to develop a Web Service with that same interface and do the write logic within the Web Service. But my wish is to make this, if possible, using Proxy Service. There is a particular issue about that.
The OSB Domain is started with a user called osboperator and it has all write privileges on the remote file system in order to make possible write down the file. But it may represent a security issue. My client wants that the Proxy Service runs with a different user, impersonating a different user than the one that started the domain because when doing that it will be more secure.
Let me supply more information.
The Proxy Service is configured to respond only to HTTPS requests and there is a 2-WAY SSL configured. So the requester will present a certificate and based on the certificate there will be a user associated with that. This user associated with the certificate is the one meant to run the part of the orchestration that will tryies to write down the file on the remote file system.
Iss it possible?
How?
Is it the best approach?>
Ok, but the point is that I do not want the user beaoperator to have the grant to write the file system.
If I create a Service Account and configure the Proxy to run with the service account will not be enought? The hole proxy will be running with an user different from the one that started the domain. Or no?
>
Well, I don't think you can attach Service Account to a proxy service ... But even if you could, the answer would be "No". The proxy would be running with the very same SYSTEM PRIVILEGES (in your operating system) as any other part of OSB or WebLogic. Only privileges within the scope of OSB would be different, but that wouldn't change anything from operating system perspective, so your file would still be written by the user who started WebLogic.
So ... There is no way how you could change system user within JVM. Your code (be it OSB or anything else) is running under privileges of a single system user (beaoperator) and you can't change that from any Java application. Again, there is no way to do that.
You have to think in a different way. Instead of "how to write a file from OSB under different user?" think about "how to process data in OSB and let other system process to store them?" The answer for the first question is "no way!", whereas there are many positive answers for the second question. One of them is FTP or SFTP where you could set your Service Account, the second could be web service running outside of OSB ... -
Service-policy on Vlan interface failed
Hi, All!
This is my configuration:
class-map match-any voip_control_trust-CMAP
match ip dscp cs3
match ip dscp af31
class-map match-any voip_rtp_trust-CMAP
match ip dscp ef
class-map match-any internetwork-cntrl-CMAP
match ip dscp cs6
policy-map output_qos-PMAP
class voip_rtp_trust-CMAP
priority 56
class voip_control_trust-CMAP
bandwidth percent 2
class internetwork-cntrl-CMAP
bandwidth percent 5
class class-default
fair-queue
random-detect
cisco(config)#int Vlan 2
cisco(config-if)#service-policy output output_qos-PMAP
Configuration failed!
It was tested on 877, 871, 871W, 877W with ios c870-advipservicesk9-mz.124-15.T5.bin, c870-advipservicesk9-mz.124-15.T8.bin, c870-advipservicesk9-mz.124-15.T10.bin, c870-advipservicesk9-mz.124-15.T11.bin, c870-advipservicesk9-mz.124-24.T2.bin
Strange error. Does anybody know what's the problem?Ok, i tried to make workaround solution:
policy-map OUTPUT_QOS_PMAP
class VOIP_RTP_TRUST_CMAP
priority 56
class VOIP_CTRL_TRUST_CMAP
bandwidth percent 2
class INETWORK-CTRL-CMAP
bandwidth percent 5
class class-default
fair-queue
random-detect
service-policy OUTPUT_QOS_PMAP
service-policy output OUTPUT_QOS_PMAP
interface Vlan2
description *** WAN SVI ***
bandwidth 256
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
bridge-group 1
end
interface BVI1
description *** WAN BVI ***
bandwidth 256
ip address 10.96.0.57 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
service-policy output OUTPUT_QOS_PMAP
end
sh policy-map interface
BVI1
Service-policy output: OUTPUT_QOS_PMAP
queue stats for all priority classes:
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
Class-map: VOIP_RTP_TRUST_CMAP (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip dscp ef (46)
0 packets, 0 bytes
5 minute rate 0 bps
Priority: 56 kbps, burst bytes 1500, b/w exceed drops: 0
Class-map: VOIP_CTRL_TRUST_CMAP (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip dscp cs3 (24)
0 packets, 0 bytes
5 minute rate 0 bps
Match: ip dscp af31 (26)
0 packets, 0 bytes
5 minute rate 0 bps
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
bandwidth 2% (5 kbps)
Class-map: INETWORK-CTRL-CMAP (match-any)
6 packets, 896 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip dscp cs6 (48)
6 packets, 896 bytes
5 minute rate 0 bps
Match: access-group name IKE
0 packets, 0 bytes
5 minute rate 0 bps
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 5/0/0
(pkts output/bytes output) 6/1120
bandwidth 5% (12 kbps)
Class-map: class-default (match-any)
11 packets, 660 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops/flowdrops) 10/0/0/0
(pkts output/bytes output) 11/660
Fair-queue: per-flow queue limit 16
Exp-weight-constant: 9 (1/512)
Mean queue depth: 0 packets
class Transmitted Random drop Tail/Flow drop Minimum Maximum Mark
pkts/bytes pkts/bytes pkts/bytes thresh thresh prob
0 11/660 0/0 0/0 20 40 1/10
1 0/0 0/0 0/0 22 40 1/10
2 0/0 0/0 0/0 24 40 1/10
3 0/0 0/0 0/0 26 40 1/10
4 0/0 0/0 0/0 28 40 1/10
5 0/0 0/0 0/0 30 40 1/10
6 0/0 0/0 0/0 32 40 1/10
7 0/0 0/0 0/0 34 40 1/10
BUT! Until service-policy is on interface works nothing.
sh int bvi1
BVI1 is up, line protocol is up
Hardware is BVI, address is 0025.454a.940d (bia 0024.c495.6780)
Description: *** WAN BVI ***
Internet address is 10.96.0.57/24
MTU 1500 bytes, BW 256 Kbit/sec, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 74
Queueing strategy: Class-based queueing
Output queue: 33/1000/0 (size/max total/drops)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
114 packets output, 11034 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
ping 10.96.0.1 source bvi1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.96.0.1, timeout is 2 seconds:
Packet sent with a source address of 10.96.0.57
Success rate is 0 percent (0/5) -
Report and Alert don't executed in the error handler with a JMS proxy service
Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread. -
My proxy service (messaging) with sftp protocol is not picking up the file
Hi ,
I have proxy service , which polls for a file in a regular interval , this has stopped working suddenly . The bad part is i am not able to find any log related to the service in either the domain logs or the server logs.
I tried to disable the service and re-enable it , but it was of no use .
Please help me in this , what can i look for next ?Bala,
I just extracted the entire B2B setup as a ZIP file and imported the setup in a DEV UT01 enironment. The B2B was able to successfully pick up the B2B messages using the same ftp channel.If from one env B2B is able to pick the message using same settings then it must be a network issue. You may like to change the B2B log level to debug and then try to disable and enable the channel. See if you get anything in the log.
You may also try to create an outbound agreement and see if you are able to send message to that FTP location from the same environment.
Regards,
Anuj -
How to call a text FTP proxy service from a Java client ?
Greetings,
I've configured a text FTP proxy service which downloads files from a FTP server. It pols a directory on the FTP server and, as soon as a file respecting a given pattern apears it is downloaded. I tested the service in the test console and by putting some test files onto the FTP server. Now, I need to be able to test it from a Java client. How may I do that ? I need to write a Java client to connect to the OSB and to tell to it to use the FTP proxy in order to download a given file, from a given location and to put it in a given location on the client machine. Many thanks in advance for any help. A sample would be great !
Kind regards,
NicolasOk, I understand. The crucial question here is "what is a caller that you refer to?"
Don't get me wrong, but the problem here is that you probably don't understand, what OSB is good for. OSB is an event-driven system. The event in your case is a new message in remote FTP server. You have to define what should happen when that event is fired. And that's all. You don't have to involve other client (or caller) for this case.
You should define your FTP proxy to retrieve all relevant files from FTP server and then you should route them based on their name/content/encoding/whatever to different consumers. You can also have many proxies if you want - one for each name. It's up to you. But you don't have any "callers" in either case.
Maybe you are looking for
-
Ipod will not update from library after transfer from one PC to another?!?
I recently transfered my itunes library from one PC to another using the ipod hard drive and according to the directions listed on this site. All went smooth and roughly 12GB of music transferred. After all music was successfully transfered to the li
-
How can I Remove Recent Contacts from Messages App?
iOS 7 had a feature I could use (found here: http://www.tekrevue.com/tip/remove-recent-contacts-iphone-messages/) that would allow me to remove recent contacts from iMessage via an info tab. I used the feature to fix iMessage vs SMS issues with conta
-
All of a sudden I keep getting the same message on both my Iphone and Ipad. (Cannot connect to Itunes Store.) (OK) I am able to connect on my Mac. My Password is correct.
-
When I attempt to set up an e-mail account with Outlook, it asks me for "the password my Internet provider has given me." Where the hell do I find this?
-
File opens in Reader, but prints with Acrobat
Hi If I double click on a PDF file it opens in Reader. If I right click it and select 'print' it will attempt to print using Adobe Acrobat 5. I think Adobe Acrobat 5 is required for some old systems my company uses. How can I change default behaviour