Proxy Setup LMS3.2 with Proxyless/transparent doesnt work

Hello,
For CCO connection we need a proxyless connection (transparent proxy without the need for Proxy-IP/Port/User, working IE settings are for Direct Internet connections) but LMS3.2 isnt able to provide this:
1. Proxy Server Setup doesnt accept "No Proxy" or empty Proxy fileds
2. SW Center Please => SW-Update brings after entering my CCO-Account:
ERROR: Unable to connect to Cisco.com. Please check D:/PROGRA~2/CSCOpx/log/psu.log file for details. Download operation cannot proceed.
=> check psu.log:
[ Mon Jan 25 17:48:30 CET 2010 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Mon Jan 25 17:48:30 CET 2010 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Mon Jan 25 17:48:35 CET 2010 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
Is there any workarround to can use proxless connection for CCO-Access from LMS?
Steffen

If the proxying is transparent to the client, then there is nothing you need to do in LMS. The "No proxy" messages in the psu.log are informational. Technically, you do not have a proxy, and that is fine. If the transparent proxy is configured to intercept HTTP traffic, then things should just work. LMS should be able to connect to Cisco.com just fine without proxy settings. If you need to see why this isn't working, start a sniffer trace filtering on tcp/80 traffic to www.cisco.com. Run the software update job, and the capture should show the problem.

Similar Messages

Scrolling and rightclicking with magic mouse doesnt work anymore

Suddenly scrolling and rightclicking with magic mouse doesnt work any more. Left clicking and cursor moving works normal. I have checked the system preferences for the mouse and find nothing strange or unchecked. Any ideas?

Also tried the universal access thing. Doesnt work.

Fluxbox - Transparency doesnt work!

Hi,
I am trying to get transparency to work with my current fluxbox installation. I searched the forum quite a bit but did not find anything that would help. I have the Composite Extension in my xorg.conf, but still cant get it to work. I know there is xcompmgr, but it takes the whole transparency away from the windows being in focus. The native fluxbox one doesnt, right?
Does anybody know how to make that work??
Thanks!!!!

I could be wrong, I haven't used Composite for a while. I intend to give it another go in X.org 6.9.0/7.0, whichever is coming up as I've heard a lot of work has gone into it.

Confused with updates which doesnt work

Hey everyone! im new here, and well is the first time also i use an ipod... all was cool with my lil new toy but then something hapened and im not really sure whats happening. Well i downlaoded the lastest update for ipod and well i have to fight with my laptop sometimes cause it doesnt recognice my ipod! it makes the sound of conecting a device and the screen of the ipod says no disconect and then goes back like if i never conected...the worst of all is than i use this alot for music, movies for my large ours in trafic but now my ipod says than doesnt have songs or stuff, but when i can make my laptop recognices the ipod it plays the music and stuff...and well i use it alot as a portable hd cause i have stuff to keep and do later and i though it was for all the stuff i put on the ipod...i really dont want to restore it again
can someone help me?
sorry for the big question im kinda desesperate and about to jump from the bridge

Settings>General>Reset>Reset Network Settings.
If that doesn't fix it, contact your carrier.

MYSQL backup, mysql -e "FLUSH TABLES WITH READ LOCK" doesnt work

I want to backup mysql locking tables first using flush tables with readlock, then do rsync and then unlock tables.
I want to do it automatically using script.
When I log in to mysql using: mysql -u root -p
the command:
FLUSH TABLES WITH READ LOCK;
works and locks the tables...but when I create my.cnf with login information to mysql:
[client]
user=root
password=xxx
the command:
mysql -e "SHOW DATABASES"
works and shows the databases....
but when I run this command:
mysql -e "FLUSH TABLES WITH READ LOCK"
it doesnt lock the tables...why?
thanks

Are calling the 'mysql -e' command as your user or as root? If you call it as root (typical for a backup script), then the .my.cnf file needs to be in /root instead of $HOME.
Scott

Reverse Proxy setup for Mobility HTTP 80 configuration not working

http://technet.microsoft.com/en-us/library/hh690011(v=ocs.14).aspx
I'm trying to use the Port 80 ->8080 setup to avoid putting lyncdiscover.sipdomain.com for every additional sip domain that we want to include.
I have followed the instructions per the above link, yet when I try to log in with a user with one of those additional SIP's, I cannot log in to a mobile device.
For example,
our main sip is "contoso.com", so
[email protected] can log into her mobile device.
but user [email protected] cannot log in via mobile device.
Is there anything else that needs to be done to ensure that
[email protected] can login via a mobile device?
Auto login?
Josh
Here is the testexchangeconnectivity.com
When I run the Lync Mobile Test, I get this, almost like the http rule is useless, still requiring the need for the additional lyncdiscover.sipdomain.com .
[email protected]
Testing connectivity to the Lync Autodiscover Web Service server for a secure connection on port 443 to obtain the root token.
Connectivity to the Lync Autodiscover Web Service test failed.
Test Steps
Attempting to test Autodiscover Web Service URL https://lyncdiscover.fabrikam.com/Autodiscover/AutodiscoverService.svc/root.
Autodiscover Web Service URL can't be contacted due to failure of the following tests:
Test Steps
Attempting to resolve the host name lyncdiscover.fabrikam.com in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host lyncdiscover.fabrikam.com to ensure it's listening and open.
The port was opened successfully.
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Test Steps
ExRCA is attempting to obtain the SSL certificate from remote server lyncdiscover.fabrikam.com on port 443.
ExRCA successfully obtained the remote SSL certificate.
Additional Details
Validating the certificate name.
Certificate name validation failed.
Tell me more about this issue and how to resolve it
Additional Details
Host name lyncdiscover.fabrikam.com doesn't match any name found on the server certificate CN=lncpool01.contoso.com, OU=Domain Control Validated.

Hi,
Please verify DNS record for Lyncdiscover.fabrikam.com can be resolved.
Please make sure the web publishing rule for port 80 has been configured correcltly. The lyncdiscover.<sipdomain> entry must to be included in rule. Verify that port 8080 was typed in "Redirect requests to HTTP port" and Redirect
requests to SSL port is not selected.
Kent Huang
TechNet Community Support

Edit photo in external editor with LR adjustment doesnt work

Hi, Im on Win xp sp2 LR 1.2.
When i try the "edit a copy with lightroom adjustments" i get a Warning and the following massage: "Lightroom was unable to prepare the selected file (name) for editing, It will not be opened.". Whats weird is that lightroom creates the file and its right there if i go to that folder, it just doest open the external editor to continue and edit the file.
-Notice that "Edit a copy" or "Edit original" works! so there is a connection between the apps but it doesn't work with this option checked.
I did a test and created a new catalog, added some pics to it and tried the same procedure and it works just fine, so that leads me to think that its a catalog related problem but thats why im here, to ask you guys.
-Ive read other posts of the same Warning Massage but its not the same problem im experiencing.
Have a catalog of 25000 photos, im sure its not a lot to some but it has all sorts of collections and tags and colors (u know, the usual mess) so i wanna avoid going into "export as catalog" feature and re-import my catalog all over again.
Maybe its a registry problem maybe not.
Any help is welcome, thanks.

I have no idea, but have you tried File / Catalog Settings/ General tab: Relaunch and Optimize. Relates to the database.

Compare with unedited image doesnt work

hi
i started my first project in lightroom, and i use to change the look of my images in the development section every day again (a bit here, a bit there).
when i press before/after, LR5 only shows the version i did yesterday and the one from now, today, how can i see the unedited version of the image, which i imported last week?
thanks
peter

Here is one way to do it:
Activate Before/After, then on the Before/After toolbar options below the pair of images:
Click the Copy After to Before button (the arrow pointing from the right-side to the left) so that both Before and After are your latest adjustments.
Click Reset at the bottom right in Develop to reset the After view.
Click Swap Before/After (the double-arrows pointing left-to-right and right-to-left) to put the Reset one at the left and the After one with your current settings.
This will leave a trail in history so you may not want to do it this way.
You can also, in place of doing the Reset, click on one of the history steps, then swap Before and After. This will compare the current settings to that older history step.

Starting app with -jar : classpath doesnt work

I have a jar file called netcdfAll.jar with this manifest:
Manifest-Version: 1.0
Created-By: Apache Ant 1.5.1
Main-Class: ucar.nc2.ui.ToolsUI
Class-Path: prefsAll.jar units.jar HTTPClient.jar jdom.jar
Built-By: john
Built-On: 2003-12-04 18:36:43
but i get this error
+ java -Xmx512m -jar netcdfAll.jar
Exception in thread "main" java.lang.NoClassDefFoundError: ucar/util/prefs/XMLStore
at ucar.nc2.ui.ToolsUI.main(ToolsUI.java:761)
but with no other changes this works:
+ java -Xmx512m -classpath netcdfAll.jar;prefsAll.jar;units.jar;HTTPClient.jar;jdom.jar ucar.nc2.ui.ToolsUI
sorry to be so stupid, but i cant seem to see whats wrong here. the manifest is not wrapping to the next line. can anyone help?
BTW, heres an octal dump:
$ od -bc MANIFEST.MF
0000000 115 141 156 151 146 145 163 164 055 126 145 162 163 151 157 156
M a n i f e s t - V e r s i o n
0000020 072 040 061 056 060 015 012 103 162 145 141 164 145 144 055 102
: 1 . 0 \r \n C r e a t e d - B
0000040 171 072 040 101 160 141 143 150 145 040 101 156 164 040 061 056
y : A p a c h e A n t 1 .
0000060 065 056 061 015 012 115 141 151 156 055 103 154 141 163 163 072
5 . 1 \r \n M a i n - C l a s s :
0000100 040 165 143 141 162 056 156 143 062 056 165 151 056 124 157 157
u c a r . n c 2 . u i . T o o
0000120 154 163 125 111 015 012 103 154 141 163 163 055 120 141 164 150
l s U I \r \n C l a s s - P a t h
0000140 072 040 160 162 145 146 163 101 154 154 056 152 141 162 040 165
: p r e f s A l l . j a r u
0000160 156 151 164 163 056 152 141 162 040 110 124 124 120 103 154 151
n i t s . j a r H T T P C l i
0000200 145 156 164 056 152 141 162 040 152 144 157 155 056 152 141 162
e n t . j a r j d o m . j a r
0000220 015 012 102 165 151 154 164 055 102 171 072 040 152 157 150 156
\r \n B u i l t - B y : j o h n
0000240 015 012 102 165 151 154 164 055 117 156 072 040 062 060 060 063
\r \n B u i l t - O n : 2 0 0 3
0000260 055 061 062 055 060 064 040 061 070 072 063 066 072 064 063 015
- 1 2 - 0 4 1 8 : 3 6 : 4 3 \r
0000300 012 015 012
\n \r \n
0000303

it appears to be a bug in ant, i have submitted an error report to them.
http://issues.apache.org/bugzilla/show_bug.cgi?id=25255
i will say that whatever is failing is not obvious, that the "good" and "bad" manifest files seem identical except for the ordering.
$ cat manifest.bad
Manifest-Version: 1.0
Created-By: Apache Ant 1.5.1
Main-Class: ucar.nc2.ui.ToolsUI
Class-Path: prefsAll.jar HTTPClient.jar units.jar jdom.jar
$ cat manifest.good
Manifest-Version: 1.0
Class-Path: prefsAll.jar HTTPClient.jar units.jar jdom.jar
Created-By: Apache Ant 1.5.1
Main-Class: ucar.nc2.ui.ToolsUI

Registering the Iphone with AT&T doesnt work =/

I bought the phone in the states, I live in Sweden. When using Itunes 10.5 I cant register the phone with AT&T as I am promted to do. Thus it renders my phone unusable. The exakt problem is that i fill in the form they require but on the last page (of 3) there is the "terms and conditions"-page, it shows blank (not text) and only the continue button and the "I accept"button shows. I fill in the "I agree"button but nothing happens when I clikc on the continue button. How can I get around this?

Your USA phone will be carrier locked to AT&T in the US. It will not work with any foreign carrier, including AT&T outside of the USA. Nor will AT&T unlock it (they simply don't unlock phones) and they would be the only ones who could do so.
You can buy unlocked iPhones in the USA, direct from Apple, but no carrier in the USA sells unlocked iPhones, and even at an Apple store, you would need to specifically request an unlocked phone and pay full retail prices (current unlocked iPhone 4 is $549.00 USD).
About all you can do is return it, if possible, or sell it online perhaps.

Arrow of a selected JMenu with a submenu doesnt work

Hello,
I've a problem with a menubar with some JMenu's and some submenu's.
The color of the arrow of a JMenu is always black when it is selected. Even when I changed the DefaultUI settings for this component.
Sow when I change the follow parameters the text and the arrow have the good color.
Menu.foreground (same for MenuItem)
but when I change the follow parameters only the color of the text will change when selected and the arrow is still black
Menu.selectedForeground (same for MenuItem)
Do i something wrong or is this a bug ?
Thx in advance!

If you need further help then you need to create a [url http://homepage1.nifty.com/algafield/sscce.html]Short, Self Contained, Compilable and Executable, Example Program (SSCCE) that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
And don't forget to use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags so the code retains its original formatting.

Personalization: Property with type="Date" doesnt work

Hi,
I am trying to personalize a property whose type is Date.
<property name="DoB" value="19820117">
<property name="Personalization" value="dialog"/>
<property name="type" value="date"/>
</property>
Though i get the calendar icon and am able to <b>personalize</b> the property, the value doesn't reflect when i try to write it using response.write(). Its always "19820117".
What could be the issue? I have another property with type=String and it works as expected.
Thanks,
Shruti

Hi
did u import util.date() in the component.
did u write correct functionality in development for date.
send test mail i will send one word doc related to this
Regards
Sunil
[email protected]

Video Chat with AIM Buddy doesnt work

On video chat and trying to chat with a new AIM buddy - we are both on each others buddy list. When I send invite to her to video chat, she accepts, and then my screen says its starting video chat. but nothing happens. then error message comes up saying it was a communication error.
any ideas?

Depends which Communication Error.
Open the Details line when you try a chat again and copy the top part of the Log (Down to Binary images for iChat) and post it here.
10:27 PM Tuesday; October 6, 2009

Cardreader with Memory Stick doesnt work

Hello,
I have the following problem with my mega pc 180 deluxe: the cardreader dont read my Sony Memory Stick (the normal one not the pro). In this cardreader (the right one) a secure digital card works fine.
Whats the problem? and how can i solve it?
Thanx for any reaction,
Gert-Jan

Are you sure whether this cardreader support Sony Memory Stick or not?
I don't think so but... never tried that so...

Af:tree with master-detail doesnt work

Hi,
I created master-detail(used updateable VO's) and test it from the application module and everything worked as expected.
Now I try to show all master and detail data in af:tree component.
At the runtime I can see only master data, but there's no detail data at all. I tried all of this before and everything worked fine, and now I cant get this work.

<af:tree value="#{bindings.Master1.treeModel}"
var="node">
<f:facet name="nodeStamp">
<af:outputText value="#{node}"/>
</f:facet>
</af:tree>
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
version="10.1.3.39.84" id="app_page1PageDef"
Package="main.userinterface.pageDefs">
<parameters/>
<executables>
<iterator id="Master1Iterator" RangeSize="10"
Binds="Master1" DataControl="AppModuleServiceDataControl"/>
</executables>
<bindings>
<tree id="Master1" IterBinding="Master1Iterator">
<AttrNames>
<Item Value="IdMaster1"/>
<Item Value="Name"/>
<Item Value="MasterValue1"/>
<Item Value="MasterValue2"/>
<Item Value="MasterValue3"/>
</AttrNames>
<nodeDefinition DefName="main.datamodel.queries.Master1"
id="Master1Node">
<AttrNames>
<Item Value="MasterValue1"/>
</AttrNames>
<Accessors>
<Item Value="Detail1"/>
</Accessors>
</nodeDefinition>
<nodeDefinition DefName="main.datamodel.queries.Detail1"
id="Detail1Node">
<AttrNames>
<Item Value="DetailValue1"/>
</AttrNames>
</nodeDefinition>
</tree>
</bindings>
</pageDefinition>
Thank you in advance.
Alex

Note, that PanelCollection is a naming container. So if you have wrapped your table in a PanelCollection you will have to add PanelCollection's ID to master table's ID when refering the master table as a partial trigger for the detail one. For example, if the value of detail table's partialTriggers attribute has been <tt>partialTriggers="::masterTable"</tt> now it should become <tt>partialTriggers="::pnlColl:materTable"</tt> (supposing that PanelCollection's ID is <tt>pnlColl</tt>).

Proxy Setup LMS3.2 with Proxyless/transparent doesnt work

Similar Messages

Maybe you are looking for