PRT availability could not be checked

Dear All,
when I want to make a PRT availability check for "Production Resources/Tools" in MD04. When I start it I get the following error:
PRT availability could not be checked
Message no. CO285
Diagnosis
The availability of the PRTs (production resources and tools) could not be checked for one of the following reasons:
There are no control parameters defined in Customizing for this plant and order type.
The control parameters defined in Customizing do not permit availability checks.
There is no checking rule defined for this plant and order type.
Procedure
Go into Customizing and check the corresponding control parameters for checking the availability of PRTs.
On the material master the setting for availability check is defined. For all other materials it works but not for "Production Resources/Tools"
Can you please help me with that. Which setting is missing?
Thank you very much.
Best regards,
Markus

Hi,
You need to define
1. Checking group
2. Checking rule
3. Scope of check
4. Checking control
In defining the checking control you need to define availability check for the PRT is required or not.
This has to defined for each order type/plant combination.
Also you need to define whether you want PRT availability check to be carried out during order creation or during order release.
Assign the scope of check in the Material master MRP 3 view.
Thanks,
nandha

Similar Messages

09: order could not be checked

Experts,
I am getting the following message when I do a collective Availability Check via MDVP:-
"09" (order could not be checked). I have checked the Material Master several times over, but I am not able to find the issue. What setting do you think is missing? There are some materials where that message is not given but for a lot of them I am getting this message and not able to carry out a collective Availability Check. I assigned the same MRP group, MRP controller, Strategy group etc.. as the one assigned to the material that worked.
Your help will be greatly appreciated.
Regards,
Madagex

Hi,
I need the Availability Check to run against Individual check and maybe ATP, and both of them do not work. However, the against planning does work, but will not be useful.
Regards
Madagex

"This document could not be checked out." SharePoint 2010 checkout action using IE8

I am setting up a two-server farm, and most everything works, except the checkout action for a document. This problem occurs in both site collections, one of which requires checkout, and the other does not.
Here are the options I've tried:
Snow Leopard, Firefox 3.0.1 - works
Snow Leopard, Safari - works
Win 2003, IE 7 - works
XP, Firefox - works
XP, IE 8 - "This document could not be checked out. You may not have permission to check out the document or it is already checked out or locked for editing by another user."
In IE8, I am able to open a document as read only then use the button presented by Word to check out the document. I cannot use that as a workaround, as not all users have a version of Office that will allow checkout in that way.
Checkin works fine. I need to resolve the checkout error.

I was having the same problem mentioned here. I noted that this problem only appears when I use the FQDN in the URL ex 'http://hostname.domain.com/default.aspx'. If I access the Sharepoint site using the URL 'http://hostname/default.aspx', then
I do not have any problems checking files in or out.
I ran into this same error pattern when trying to do a document edit (library is set to force a check out), or do a direct check out via the ribbon menu or item context menu. Oddly enough when we would use the 'Edit Properties' ribbon button (which forces
a check out) we did not get an error and the document's status would change to 'checked out'. Below are the two messages we would receive when trying to do a check out:
IE error message - "This document could not be checked out. You may not have permission to check out this document or it is already checked out or locked by another user." - Click OK
IE Error message - "The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document." - Click OK
After trying several different suggestions I realized that I wasn't having the problem when I was accessing the site locally via FQDN but only when I was using the Public Site URL (via https). Turns out we were getting the error because we did not have
an AAM currectly setup. Once I changed our AAM for the Internet zone with the Public URL value instead of the FQDN the error went away.
Hope this helps anyone else trying to track this down. Oh and this was SP2010 w/SP1 (Patch version 14.0.6106.5001) on Win2008 R2 with clients running both Win7 and WinXP using IE8.

The data from the infoprovider involved could not be checked'

Hi all,
In the the selection screen of the virtual provider through the option display data, am getting message text " the data from the infoprovider involved could not be checked" , and then it brings all the data from the r/3 function module irrespective of the selection by date in the virtual info provider. I am retrieving the data from r/3 function module(RFC) to bw function module assign to virtual infoprovider.
with regards,
Ram

Hi
A Virtual Provider does not store data. to view the data in it you will have to use it in a query and check its data.
Thanks,
Rajesh.
Please provide points to answers if you find them helpful

Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

Have you tried re-booting your WiFi router ? It may seem OK on your PC, but a re-boot may help.

'The data from the Infoprovider could not be checked' message

Hi,
   Recently we upgraded our BI system from 3.5 to BI7. Now I am displaying the Infoset data using LISTCUBE and received the following message,
                      ' The Data from the Infoprovider ZIS_PRMS3 involved could not be checked' where ZIS_PRMS3 is a Infoset.
However If I ignore that message I am able to see the data and query also displays proper data. But my doubt is why this message appears? and what could be the reason for this?. (Before upgrade we didnt get this type of message)
I searched in SDN and found some threads talk about this. But not able to identify the reason for the message and how to suppress it.
Infoset contains 2 ODS and 2 Infoobjects, all the join conditions are perfect. Can anybody through some light onthis.
Thanks.
V.Senthil

Hi Krishna,
    Thanks for the reply. As mentioend I have reactivated my Infoset, but still I am receiving that message.
I dont know what could be reason still. Waiting for the replies.
Thanks,
V.Senthil

Manually entered packing instruction ID could not be checked

Dear JP,
When i use t-code: pop1, the system occurs this information: Manually entered packing instruction ID could not be checked.
Please tell me how i can solve this problem? The detail information as below,
Message no. VHU01116
Diagnosis
There is a number range object for the packing instruction ID. It is likely that the number ranges (intervals) for this number range object are wrongly defined, or not defined at all.
System Response
The system could not check the packing instruction ID.
Procedure
Check in Customizing (Handling Unit Management -> Automatic Packing -> Packing Instructions Master Data -> Define Number Ranges for Packing Instructions (or transaction OPIN) whether the following intervals are defined:
No. From No.                                To No.                                      No. Level    Ext
01 00000000000000000001 99999999999999999999    0
02 A                                               ZZZZZZZZZZZZZZZZZZZZ                    X

Hello,
Try using tcode OVHU2. Here you can choose e.g. outbound delivery if you want to assign a procedure to outbound deliveries.
Refer following link for details on packing and it configuration.
Packing instruction determination
Thanks & Regards
JP

The data from the InfoProvider XYZ involved could not be checked

Hi team,
i am making one infoprovider, in which i am joining one DSO with one infocube,
the dso and infocube both have data , however when i join them and create an infoset and when i do display data i receive the following message
"The data from the InfoProvider XYZ involved could not be checked", and i cant see any records
plz assist if any one has face such issues
Regards
Blusky

Hi,
yes i do have data, i have one issue, when join occours does it occurs on SID or actual column
Means
Table1
C1       SID
CHN     2
Table 2
C1     SID
CHN    4
Now when i join them at C1 then CHN = CHN but SID <> SID of T2 , just confused here what exactly happens in back end..

The data from the infoProvider 0coorder involved could not be checked

While displaying data from the Multiprovider in BW, I am getting these warning messages.
1. Selection for charcteristic 0COMP_CODE could not be checked.
2. The data from the infoProvider 0coorder involved could not be checked.
Please let me know why i am getting these warning messages and how i can fix them up.
Thanks in advance.
Regards
Harman

if this is for Infoobjects why don't u use Infoset instead of Multiprovider?
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
Thanks and regards

Creative Suite 6 Design Standard serialnumber could not be checked

I bought the Creative Suite 6 Design Standard Version for students and teachers (MAC) five days ago. Download had been succesfull. But when I enter the serialnumber, there comes the error message:
"The serialnumber is unverifable. Please apply to support."
I need the programs. What should I do know?

Serial number issues cannot be handled on a public web forum. Use Web Chat here:
Serial number and activation support

Whenever I try to import videos, an error tab appears, saying "Could not complete your request because DynamicLink is not available"

Whenever I try to import videos, an error tab appears, saying "Could not complete your request because DynamicLink is not available"

Could not complete your request because the DynamicLink Media Server is not available. | Mylenium's Error Code Database
Mylenium

Could not download

What's going on? I get to 3 minutes remaining in the download of the app from the app store, and then the download stops. It says 'could not download, check internet connection'. The internet connection is fine. But I can't finish the download. What do I do now?!

hi
thanks for reply
i am using my internet connection for so many downloads
i think it can not establish connection with server
could you provide me another link for download wtk

The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error

We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC)                   0x1BC0 SharePoint Server Search      Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588)                   0x1DE4 SharePoint Server Search      Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC)                     0x1060 SharePoint Server Search      HTTP Protocol
Handler         du4i                    0x29E4 SharePoint Server Search      HTTP
Protocol Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x29E4 SharePoint Server Search      HTTP Protocol
Handler         du54 High    CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x130C SharePoint Server Search      Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x2948 SharePoint Server Search      Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvg0 High    STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
en0e High    CSTS3Accessor::InitURLType: Return error to caller, hr=80041200                 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dv3p High    CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb1 High    CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb2 High    CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200            [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil Loka

Hi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
          Ping <servername>
      2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I bought and was charged for some music. It is not in check for available downloads or my purchased file. However it shows up in recent purchases. I just recovered from a problem and had to uninstall and reinstall. Where could this purchase be?

I bought and was charged for some music. It is not in check for available downloads or the purchased file. It does show up on my view my account recent purchases. Where could this music be? I recently recovered from an iTunes problem and had to uninstall and reinstall and finally manged to get everything back to work. Except for this most recent purchase which just happens to be my son's band so I would really like to have it.

Start with this article.
http://support.apple.com/kb/TS1408
If you live in the US, you can always redownload the music at no cost. See this article for information.
http://support.apple.com/kb/ht2519
And if nothing else, try contacting iTunes support and explaining the situation to them.
http://www.apple.com/support/itunes/contact.html
B-rock

TS4185 When trying to activate FaceTime I got code,"Could not sign in.Please check network connections and try again".wi fi connection is wall to wall and I can access everything else.Just can't activate facetime? Menu Facetime/preference is not available

When trying to activate facetime get the message i get "could not sign in. Please check network connections
My Apple ID is correct
tried with a new apple Id ...doesn't work neither
My connection is correct..;
I ve seen that this issue is frequent within mac users
Can anyone bring some help?
Thank you

Hello
Try this... I had the same problem and this worked for me.
Go to your system preferences → network → make sure WI-FI selected → advanced → DNS tab. Add 8.8.8.8 to the DNS servers. Go back to FaceTime and try to verify your account again.
Good luck!

PRT availability could not be checked

Similar Messages

Maybe you are looking for