PS/2 Pointing Stick axis problems/configuration
Hi,
I have a Unicomp EnduraPro PS/2 buckling spring keyboard, which comes with an old IBM style pointing stick and mouse buttons. For clarity:
>>moderator edit: Removed large image. Please read Forum Etiquette: Pasting Pictures and Code. Thanks. --fsckd<<
The problem I am experiencing is that the mouse cursor seems to not recognize the left axis or something.
When pushing the stick to the right, it travels to the right normally, in a straight line.
When pushing the stick upwards, it travels in a diagonal line to the up-right.
The same for pushing it downwards, it travels down-right.
When pushing it to the left, the cursor does not move.
The left mouse button appears to do nothing.
The right mouse button acts as the left mouse button.
I have an additional USB mouse, which works perfectly well.
After researching as much as possible, I checked xinput:
─> xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech G500 id=8 [slave pointer (2)]
⎜ ↳ Logitech G500 id=9 [slave pointer (2)]
⎜ ↳ PS/2 Generic Mouse id=11 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=10 [slave keyboard (3)]
It appears it is recognizing it as "PS/2 Generic Mouse id=11" so I checked it's individual properties:
─> xinput list-props 11
Device 'PS/2 Generic Mouse':
Device Enabled (141): 1
Coordinate Transformation Matrix (143): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (269): 0
Device Accel Constant Deceleration (270): 1.000000
Device Accel Adaptive Deceleration (271): 1.000000
Device Accel Velocity Scaling (272): 10.000000
Device Product ID (258): 2, 1
Device Node (259): "/dev/input/event14"
Evdev Axis Inversion (273): 0, 0
Evdev Axes Swap (275): 0
Axis Labels (276): "Rel X" (151), "Rel Y" (152)
Button Labels (277): "Button Left" (144), "Button Middle" (145), "Button Right" (146), "Button Wheel Up" (147), "Button Wheel Down" (148)
Evdev Middle Button Emulation (278): 0
Evdev Middle Button Timeout (279): 50
Evdev Third Button Emulation (280): 0
Evdev Third Button Emulation Timeout (281): 1000
Evdev Third Button Emulation Button (282): 3
Evdev Third Button Emulation Threshold (283): 20
Evdev Wheel Emulation (284): 0
Evdev Wheel Emulation Axes (285): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (286): 10
Evdev Wheel Emulation Timeout (287): 200
Evdev Wheel Emulation Button (288): 4
Evdev Drag Lock Buttons (289): 0
And this is the point at which I have no idea how to progress from, is there a way to determine what numbers I need to set these variables to, to straighten this all out? Anyone have any experience configuring this stuff manually at all? Google seems to not know much about it, and the only relevant wiki page I was able to find was Mouse Acceleration. Additionally, the man page for xinput doesn't seem to shed much light on discovering what variables one might need to use.
It also occurred to me that the recent news item regarding modular PS/2 keyboard support may have an effect, so I checked:
─> dmesg -t | grep '^i8042'
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
So I don't believe that to be the issue, but I may be wrong.
Last edited by fsckd (2014-04-23 13:35:40)
Make sure that you are including the JDBC jar file in your classpath when running the application. If your compile goes smoothly, you can see the specific jar you need in the project's libararies (right click on the project to go to the project properties).
The main source for J2ME development is http://otn.oracle.com/tech/wireless/tools/index.html
And their specific discussion forum is at:
http://forums.oracle.com/forums/forum.jsp?forum=49
Similar Messages
-
Problems configuring Platform Domain with MS Sql Server
Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
[config.xml]Try removing the server section from the SchemaProperties line.
Preferrably do not use localhost or hostnames in the server
configuration file.
<RDBMSRealm
Name="wlcsRealm"
DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:yourIPAddress:1433"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"
SchemaProperties="user=system;password=weblogic"/>
Also consider ...
If you have a new Portal database created in SQL Server?
Does the user system have the Portal database as his default database?
-- Jim
Vikram wrote:
Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Domain Name="epmsDomain">
<Log
FileName="logs/wl-domain.log"
Name="epmsDomain"
/>
<!-- Configuration Wizard Cluster and Admin/Managed Node support -->
<Server
Name="platformServer"
ListenAddress="localhost"
ListenPort="7501"
NativeIOEnabled="true"
TransactionLogFilePrefix="logs/"
>
<SSL
Name="platformServer"
ListenPort="7502"
Enabled="true"
ServerCertificateChainFileName="ca.pem"
ServerCertificateFileName="democert.pem"
ServerKeyFileName="demokey.pem"
/>
<Log
FileName="logs/weblogic.log"
/>
<WebServer
DefaultWebApp="splashPage"
LogFileName="./logs/access.log"
LoggingEnabled="true"
Name="platformServer"
/>
</Server>
<!-- WLP Pool -->
<JDBCConnectionPool
Name="commercePool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
InitialCapacity="20"
MaxCapacity="20"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
Targets="platformServer"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
/>
<!-- WLI Pool -->
<JDBCConnectionPool
CapacityIncrement="2"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
InitialCapacity="8"
LoginDelaySeconds="1"
MaxCapacity="36"
Name="wliPool"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
RefreshMinutes="0"
ShrinkPeriodMinutes="15"
ShrinkingEnabled="true"
Targets="platformServer"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="weblogic.jdbc.pool.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="WLAI_DataSource"
Name="WLAI_DataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="com.bea.wlpi.TXDataSource"
Name="TXDataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="WLCHub.DS"
Name="WLCHub.DS"
PoolName="wliPool"
Targets="platformServer"/>
/>
<!-- Configure WebLogic Workshop to run in Platform domain -->
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="cgDataSource"
Name="cgDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="cgSampleDataSource"
Name="cgSampleDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JMSConnectionFactory JNDIName="weblogic.jws.jms.QueueConnectionFactory"
Name="cgQueue" Targets="platformServer"/>
<JMSJDBCStore ConnectionPool="commercePool" Name="cgJDBCStore" PrefixName="WEBLOGIC"/>
<JMSServer Name="cgJMSServer" Store="cgJDBCStore" Targets="platformServer">
<JMSQueue JNDIName="jws.queue" Name="cgJWSQueue" StoreEnabled="default"/>
</JMSServer>
<JTA Name="epmsDomain" TimeoutSeconds="3600"/>
<!-- End: Configure WebLogic Workshop to run in Platform domain -->
<!-- WLP DATASYNC -->
<JDBCConnectionPool
Name="dataSyncPool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="WEBLOGIC"
InitialCapacity="1"
MaxCapacity="5"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
Targets="platformServer"/>
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.dataSyncPool"
Name="dataSyncPool"
PoolName="dataSyncPool"
Targets="platformServer"/>
/>
<!-- General Config -->
<Security
GuestDisabled="false"
Name="epmsDomain"
PasswordPolicy="wl_default_password_policy"
Realm="wl_default_realm"
CompatibilityMode="true"
/>
<PasswordPolicy
Name="wl_default_password_policy"
/>
<Realm
Name="wl_default_realm"
CachingRealm="wlcsCachingRealm"
FileRealm="wl_default_file_realm"
/>
<CachingRealm
BasicRealm="wlcsRealm"
CacheCaseSensitive="true"
Name="wlcsCachingRealm"
/>
<RDBMSRealm DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:localhost:1433"
SchemaProperties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Name="wlcsRealm"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"/>
<FileRealm
Name="wl_default_file_realm"
/>
<StartupClass
ClassName="com.beasys.commerce.ebusiness.security.KeyBootstrap"
FailureIsFatal="false"
Name="KeyBootstrap"
Targets="platformServer"
/>
<!-- WLI configuraion for Platform -->
<JMSConnectionFactory Name="WLI_B2B_TopicFactory"
JNDIName="com.bea.wli.b2b.server.TopicConnectionFactory"
AllowCloseInOnMessage="true"
UserTransactionsEnabled="true"
Targets="platformServer"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wli.b2b.rosettanet.QueueConnectionFactory"
Name="RNQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="false"
DefaultDeliveryMode="Persistent"
DefaultPriority="4"
DefaultTimeToLive="0"
JNDIName="com.bea.wlai.JMSConnectionFactory"
MessagesMaximum="10"
Name="WLAI_JMSConnectionFactory"
OverrunPolicy="KeepOld"
UserTransactionsEnabled="true"
Targets="platformServer"/>
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.TopicConnectionFactory"
Name="wlpiFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.QueueConnectionFactory"
Name="wlpiQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSJDBCStore
ConnectionPool="wliPool"
Name="JMSWLIStore"
PrefixName="PBPUBLIC"
/>
<JMSServer Name="WLIJMSServer"
Targets="platformServer"
TemporaryTemplate="TemporaryTemplate"
Store="JMSWLIStore">
<JMSTemplate Name="TemporaryTemplate"/>
<!-- B2B -->
<JMSQueue Name="WLI_B2B_RNEncoderQueue"
JNDIName="com.bea.wli.b2b.rosettanet.EncoderQueue"/>
<JMSTopic Name="WLI_B2B_Topic"
JNDIName="com.bea.wli.b2b.server.B2BTopic"/>
<JMSQueue Name="WLI_B2B_OutboundQueue"
JNDIName="com.bea.b2b.OutboundQueue"/>
<!-- BPM -->
<JMSTopic Name="wlpiEvent"
JNDIName="com.bea.wlpi.EventTopic"/>
<JMSQueue Name="WLI_BPM_Timer"
JNDIName="com.bea.wli.bpm.TimerQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_Event"
JNDIName="com.bea.wli.bpm.EventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_ValidatingEvent"
JNDIName="com.bea.wli.bpm.ValidatingEventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSTopic Name="WLI_BPM_Error"
JNDIName="com.bea.wli.bpm.ErrorTopic"/>
<JMSTopic Name="WLI_BPM_Audit"
JNDIName="com.bea.wli.bpm.AuditTopic"/>
<JMSTopic Name="WLI_BPM_Notify"
JNDIName="com.bea.wli.bpm.NotifyTopic"/>
<!-- AI -->
<JMSQueue Name="WLAI_ASYNC_REQUEST_QUEUE"
JNDIName="com.bea.wlai.ASYNC_REQUEST_QUEUE"/>
<JMSQueue Name="WLAI_ASYNC_RESPONSE_QUEUE"
JNDIName="com.bea.wlai.ASYNC_RESPONSE_QUEUE"/>
<JMSQueue Name="WLAI_EVENT_QUEUE"
JNDIName="com.bea.wlai.EVENT_QUEUE"/>
<JMSTopic Name="WLAI_EVENT_TOPIC"
JNDIName="com.bea.wlai.EVENT_TOPIC"/>
<!-- App View control -->
<JMSQueue JNDIName="com.bea.wlai.WORKSHOP_ASYNC_RESPONSE_QUEUE" Name="WLAI_WORKSHOP_ASYNC_RESPONSE_QUEUE"/>
<JMSQueue JNDIName="com.bea.wlai.WORKSHOP_EVENT_QUEUE" Name="WLAI_WORKSHOP_EVENT_QUEUE"/>
<!-- WLI -->
<JMSQueue Name="WLI_FailedEvent"
JNDIName="com.bea.wli.FailedEventQueue"
StoreEnabled="true"/>
<JMSTemplate Name="WLI_JMSTemplate"
ErrorDestination="WLI_FailedEvent"
RedeliveryDelayOverride="60000"
RedeliveryLimit="10"/>
</JMSServer>
<JMSJDBCStore Name="JMSWLIStore"
ConnectionPool="wliPool"
PrefixName="platformServer"/>
<!-- Distributed queue/topic configuration for WLI components -->
<!-- End WLI configuraion for Platform -->
<!--===========================================================================-->
<!-- Configure the J2EE enterprise applications supporting the Platform -->
<!--===========================================================================-->
<!-- The enterprise application containing the WLS-based Tax and Payment WebService -->
<Application
Deployed="true"
Name="taxWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/taxWSApp"
TwoPhase="true"
>
<EJBComponent
Name="tax"
URI="tax.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="tax-webservice"
URI="tax-ws"
Targets="platformServer"
/>
</Application>
<Application
Deployed="true"
Name="paymentWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/paymentWSApp"
TwoPhase="true"
>
<EJBComponent
Name="payment"
URI="payment.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="payment-edit webservice"
URI="pay-ws"
Targets="platformServer"
/>
</Application>
<!-- The enterprise application containing the installed/online links documentation -->
<Application
Deployed="true"
Name="wlpDocsApp"
Notes=""
Path="C:/bea/weblogic700/portal/lib"
TwoPhase="true"
>
<WebAppComponent
IndexDirectoryEnabled="false"
Name="wlpDocs"
Targets="platformServer"
URI="wlpDocs.war"
ServletReloadCheckSecs="300"
/>
</Application>
<!-- The enterprise application containing the WLP components -->
<Application
Deployed="true"
Name="portalApp"
Notes=""
Path="C:/bea/user_projects/epmsDomain/beaApps/portalApp"
TwoPhase="true"
>
<ApplicationConfiguration
Name="portalApp"
Targets="platformServer"
URI="META-INF/application-config.xml"
/>
<EJBComponent
Name="events"
Targets="platformServer"
URI="events.jar"
/>
<EJBComponent
Name="pipeline"
Targets="platformServer"
URI="pipeline.jar"
/>
<EJBComponent
Name="property"
Targets="platformServer"
URI="property.jar"
/>
<EJBComponent
Name="rules"
Targets="platformServer"
URI="rules.jar"
/>
<EJBComponent
Name="usermgmt"
Targets="platformServer"
URI="usermgmt.jar"
/>
<EJBComponent
Name="customer"
Targets="platformServer"
URI="customer.jar"
/>
<EJBComponent
Name="ebusiness"
Targets="platformServer"
URI="ebusiness.jar"
/>
<EJBComponent
Name="portal"
Targets="platformServer"
URI="portal.jar"
/>
<EJBComponent
Name="campaign"
Targets="platformServer"
URI="campaign.jar"
/>
<EJBComponent
Name="catalogws"
Targets="platformServer"
URI="catalogws.jar"
/>
<EJBComponent
Name="document"
Targets="platformServer"
URI="document.jar"
/>
<EJBComponent
Name="ejbadvisor"
Targets="platformServer"
URI="ejbadvisor.jar"
/>
<EJBComponent
Name="mail"
Targets="platformServer"
URI="mail.jar"
/>
<EJBComponent
Name="placeholder"
Targets="platformServer"
URI="placeholder.jar"
/>
<WebAppComponent
Name="toolSupport"
Targets="platformServer"
URI="toolSupport"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="tools"
Targets="platformServer"
URI="tools"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="datasync"
Targets="platformServer"
URI="datasync"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="splashPage"
Targets="platformServer"
URI="splashPage"
ServletReloadCheckSecs="300"
/>
<!-- The enterprise application containing the WLP P13N Console components -->
</Application>
<Application
Deployed="true"
TwoPhase="true"
StagedTargets="platformServer"
Name="p13nConsoleApp"
Path="C:/bea/weblogic700/portal/lib"
>
<WebAppComponent
Name="p13nConsole"
ServletReloadCheckSecs="300"
Targets="platformServer"
URI="p13nConsole.war"
/>
</Application>
<!-- The enterprise application containing the WLI components -->
<Application Deployed="true" LoadOrder="900" Name="EAI" Path="C:/bea/weblogic700/samples/workshop/wlai/ear/" TwoPhase="true">
<EJBComponent
DeploymentOrder="100"
Name="repository-ejb.jar"
Targets="platformServer"
URI="repository-ejb.jar"/>
<EJBComponent Name="WLI-B2B Startup"
DeploymentOrder="200"
Targets="platformServer"
URI="b2b-startup.jar"/>
<EJBComponent DeploymentOrder="300" Name="b2b-rosettanet.jar" Targets="platformServer" URI="b2b-rosettanet.jar"/>
<WebAppComponent DeploymentOrder="400" Name="b2b.war" Targets="platformServer" URI="b2b.war"/>
<WebAppComponent DeploymentOrder="500" Name="b2bconsole.war" Targets="platformServer" URI="b2bconsole.war"/>
<EJBComponent DeploymentOrder="600" Name="WLI-AI Server" Targets="platformServer" URI="wlai-server-ejb.jar"/>
<WebAppComponent DeploymentOrder="700" Name="wlai" Targets="platformServer" URI="wlai.war"/>
<EJBComponent DeploymentOrder="800" Name="WLI-AI Async Processor" Targets="platformServer" URI="wlai-asyncprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="900" Name="WLI-AI Event Processor" Targets="platformServer" URI="wlai-eventprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="1000" Name="wlpi-ejb.jar" Targets="platformServer" URI="wlpi-ejb.jar"/>
<EJBComponent DeploymentOrder="1100" Name="wlpi-master-ejb.jar" Targets="platformServer" URI="wlpi-master-ejb.jar"/>
<EJBComponent DeploymentOrder="1200" Name="wlpi-mdb-ejb.jar" Targets="platformServer" URI="wlpi-mdb-ejb.jar"/>
<EJBComponent DeploymentOrder="1300" Name="WLXTEJB.jar" Targets="platformServer" URI="WLXTEJB.jar"/> -
Why does the Point Stick on Dell Laptops suck so bad?
I have a Dell Latitude E6540 and a couple 7440's where the mouse will float if I use the pointing stick. I will use it for moving the mouse around and it is constantly moving after I stop. Let's say I want to close a window by clicking on the X. If I use the point stick to move the mouse vertically up and to the right, I will get over the X and lift my finger up off the pointing stick and the cursor will keep moving. It is SOOOO annoying. I moved to this laptop from a ThinkPad T420 and the pointing stick on that was so much better than this one. I hate using the touchpad, but when I'm fed up with this issue that's what I'll have to resort to.Someone, anyone, please shed some light on this situation. I can't believe that as long as Dell has been making laptops that this has not been an issue before. I can't be the only one affected.
Hi guys,I am about to order a bunch of hardware for my new vSphere home lab, my 16GB Macbook Pro is not enough anymore.The problem is I haven't been building PCs for ages so I am concerned I might miss something (e.g. fan, cable, tools?) or some of the components could be incompatible.So I would really appreciate your advice/help on the following shopping list (the prices are in AUD)I will have 2 ESXi hosts with SSD drives for vFlash Read Cache and 4x 1TB drives in RAID10 as iSCSI storage. Each host will have 16GB of RAM for now, will expand to 32GB later.I was thinking about 8core Avaton, but it doesn't have VT-d and is not significantly cheaper than E3, at least here in Australia.Also I thought about using Avaton as white box for the storage, but again it will cost me pretty much the same I would pay for Synology DS415+.Advice on the...
-
Pointing stick not working (EliteBook 8440p)
Hi.
I just bought a used HP EliteBook 8440p. The laptop seems fine apart from one issue; the pointing stick is not working. The buttons for the pointing stick does work, so does the touchpad and its buttons.
If I open the device manager, I see an unknown device under "Other devices" (I'm not using an english version of Windows, so my translation might be off). If I check its properties, it says "PCI bus 68, device 6, function 2". Might this be the pointing stick? If so, where do I find the correct driver?
I have installed the Synaptics touchpad driver, but this didn't help. The OS is Windows 7 pro, 64bit.
Any help would be appreciated.
This question was solved.
View Solution.Never mind. The problem was that the ribbon cable for the pointing stick, had been inserted into the socket on the motherboard slightly askew.
-
Cursor moves when in tablet mode (screen touching the pointing stick on an X220T)
Hi there,
when I put my X220T in tablet mode, the screen moves just enough to move the pointing stick in the middle of the keyboard to cause the cursor to move. I can't rest my hand on the screen without causing the cursor to move all the way accross the screen.
Am I missing a driver that would disable the nub when the screen is turned over it, or is this a design oversight? I've got the latest BIOS.
Cheers,
Kimmo
http://vanhavirta.fi/
Solved!
Go to Solution.Nevermind, I was too hasty: https://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/X220-TrackPoint-Wandering-in-Tablet-Mo...
http://vanhavirta.fi/ -
Problems configuring HP Laserjet M1213nf MFP with Mac via AirPrint
Hello,
I have a HP Laserjet M1213nf MFP printer, connected to a Dlink DSL-2730U ADSL router. I am having problems configuring the printer with my Macbook running OSX Yosemite. I can see the printers name in nearby printers but when I try to add the printer, the mac gives me an error saying, "unable to communicate with the printer at this time". The network settings on the printer are configure for iPv4 and iPv6 addresses.
Previously, I had the ADSL DSL-2750U model router, and the printer was connected fine. I did not face any issues then. I have been facing problems since I changed my router so the problem should be in the router. I have the IP for the printer reserved in the DHCP reservation list on the router settings using the mac address of the printer.
Can someone please help me out here? Is there something I am probably missing.
Rgds
~n~I talked to the DLink Support. They asked me to disable an option called "MultiAP Isolation" and Voila, the printer is working fine. I can add it to all my devices on the wireless network. I looked up google. Apparently, this isolation feature present in some routers, prevent wifi clients to interact with other devices connected to the wired network and also with each other. Thats why only my desktop which was also connected wired was only able to access the printer and not the laptops connected wirelessly.
Problem solved. Thanks for all your help on this one.
Cheers! -
TrackPoint pointing stick not working on brand new ThinkPadE440
I recently purchased a Lenovo ThinkPad E440 from the official lenovo website and received it two days ago. I would like to use the TrackPoint pointing stick but I can't enable it via 'Mouse Properties' in Control Panel as the entire TrackPoint section is faded out (you can't check the box that says enable). Could someone please advise me on how I can enable the trackpoint? Not sure if this is important but the laptop has Windows 8.1 installed.Thank you.
Hi Pbahal,
Welcome to Lenovo Community!
I’m sorry to hear that you are facing the issue with Track Point on ThinkPad E440.
I suggest you to uninstall current version of ThinkPad UltraNav driver, and download the latest driver for Windows 8.1 OS from the Lenovo link and install to resolve the issue.
Below is the link to enter the downloads page and install Wifi driver and check accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Problem configuring Username token profile on ALSB
Hi All !!
First of all, thanks for your support!!
I'm facing a problem configuring an active intermediary Proxy service with username token profile. This proxy service has a security policy referencing Auth.xml file to implement Username token profile. That proxy calls a business service which calls a web service.
On test page, username and password is requested (already created in the security domain), then an error is returned "Unable to add security token for identity".
Below you can find the Invocation Trace:
Invocation Trace
(receiving request)
Initial Message Context
added $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<per:getPersona xmlns:per="http://com/indra/persona">
<per:nombre>string</per:nombre>
<per:apellidos>string</per:apellidos>
</per:getPersona>
</soapenv:Body>
added $header
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
added $inbound
<con:endpoint name="ProxyService$PruebaWSsecurity$PersonaProxy92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:uri>/PersonaProxy92</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
*<con:security>*
*<con:transportClient>*
*<con:username><anonymous></con:username>*
*</con:transportClient>*
*<con:messageLevelClient>*
*<con:username>securityUser</con:username>*
*<con:principals>*
*<con:group>Administrators</con:group>*
*<con:group>IntegrationAdministrators</con:group>*
*</con:principals>*
*</con:messageLevelClient>*
*</con:security>* </con:endpoint>
added $messageID
2741921765813726088-1b0fcf1c.12204e4868c.-8f3
RouteNode1
Routed Service
Route to: "PersonaBusiness92"
$outbound:
<con:endpoint name="BusinessService$PruebaWSsecurity$PersonaBusiness92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
</con:request>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
$body (request):
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<per:getPersona xmlns:per="http://com/indra/persona">
<per:nombre>string</per:nombre>
<per:apellidos>string</per:apellidos>
</per:getPersona>
</soapenv:Body>
$header (request):
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
$attachments (request):
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
Message Context Changes
added $outbound
<con:endpoint name="BusinessService$PruebaWSsecurity$PersonaBusiness92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:uri>http://esmadaix01:9103/WSPersona/Persona</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:user-header name="SOAPAction" value=""""/>
<tran:user-header name="X-Powered-By" value="Servlet/2.4 JSP/2.0"/>
<http:Content-Type>text/xml; charset="utf-8"</http:Content-Type>
<http:Date>Mon, 22 Jun 2009 10:34:18 GMT</http:Date>
<http:Transfer-Encoding>chunked</http:Transfer-Encoding>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">OK</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<http:http-response-code>200</http:http-response-code>
</con:response>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
changed $header
<soapenv:Header xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"/>
changed $inbound
<con:endpoint name="ProxyService$PruebaWSsecurity$PersonaProxy92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:uri>/PersonaProxy92</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
<con:messageLevelClient>
<con:username>securityUser</con:username>
<con:principals>
<con:group>Administrators</con:group>
<con:group>IntegrationAdministrators</con:group>
</con:principals>
</con:messageLevelClient>
</con:security>
</con:endpoint>
changed $attachments
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
changed $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<m:getPersonaResponse xmlns:m="http://com/indra/persona">
<persona>
<correo>[email protected]</correo>
<telefono>91546789</telefono>
</persona>
</m:getPersonaResponse>
</soapenv:Body>
System Error Handler
$fault: <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386201</con:errorCode>
*<con:reason>*
*A web service security fault occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Unable to add security token for identity]*
*</con:reason>*
<con:details>
<err:WebServiceSecurityFault xmlns:err="http://www.bea.com/wli/sb/errors">
<err:faultcode xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">soapenv:Server</err:faultcode>
<err:faultstring>
Unable to add security token for identity
</err:faultstring>
</err:WebServiceSecurityFault>
</con:details>
<con:location>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>We have the same problem.
Have you the reposne?
Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
</soapenv:Envelope>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="unt_ZqnW7MTAb7P77cPL" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>weblogic10</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">??????????????</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soapenv:Body>
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
</soapenv:Envelope>
Response Document
The invocation resulted in an error: .
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>
Unable to add security token for identity
</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:metadata>
Invocation Trace
(receiving request)
Initial Message Context
added $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
added $header
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
added $inbound
<con:endpoint name="ProxyService$ctxweb$t17i_wss-1" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:uri>/ctxweb/t17i_wss_1</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
<con:messageLevelClient>
<con:username>weblogic10</con:username>
<con:principals>
<con:group>AdminChannelUsers</con:group>
<con:group>Administrators</con:group>
<con:group>IntegrationAdministrators</con:group>
</con:principals>
</con:messageLevelClient>
</con:security>
</con:endpoint>
added $messageID
6412299231164769748--466a8253.12535a4d4fe.-7f29
RouteTo_NORA-bs
Routed Service
Route to: "NORA-bs"
$outbound:
<con:endpoint name="BusinessService$business$NORA-bs" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
</con:request>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
$body (request):
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
$header (request):
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
$attachments (request):
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
Message Context Changes
added $outbound
<con:endpoint name="BusinessService$business$NORA-bs" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:uri>
http://www.integracion.jakina.ejiedes.net/t17iApiWSWar/t17iApiWS
</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:user-header name="Set-Cookie" value="JSESSIONID=Q02mLVvKw8hRcvYm7nwmyJyCQHC2FJknpGbltNPnsqp2gstzHy0M!-1566668667!734317392; path=/"/>
<http:Connection>close</http:Connection>
<http:Content-Length>666</http:Content-Length>
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:Date>Tue, 01 Dec 2009 14:59:22 GMT</http:Date>
<http:Server>
Apache/2.0.59 (Unix) mod_ssl/2.0.59 OpenSSL/0.9.7a
</http:Server>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">OK</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<http:http-response-code>200</http:http-response-code>
</con:response>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
changed $body
<env:Body xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<m:pais_getByDescResponse xmlns:m="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<n1:result xsi:type="n2:ArrayOfPais" xmlns:n1="http://www.ejie.es/webServiceEJB/t17iApiWSWar" xmlns:n2="java:t17i.vo">
<n2:Pais xsi:type="n2:Pais">
<n2:descripcionOficial>Bulgaria</n2:descripcionOficial>
<n2:id>104</n2:id>
</n2:Pais>
</n1:result>
</m:pais_getByDescResponse>
</env:Body>
changed $attachments
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
changed $inbound
<con:endpoint name="ProxyService$ctxweb$t17i_wss-1" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:uri>/ctxweb/t17i_wss_1</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
<con:messageLevelClient>
<con:username>weblogic10</con:username>
<con:principals>
<con:group>AdminChannelUsers</con:group>
<con:group>Administrators</con:group>
<con:group>IntegrationAdministrators</con:group>
</con:principals>
</con:messageLevelClient>
</con:security>
</con:endpoint>
changed $header
<soapenv:Header xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"/>
System Error Handler
$fault: <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386201</con:errorCode>
<con:reason>
A web service security fault occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Unable to add security token for identity]
</con:reason>
<con:details>
<err:WebServiceSecurityFault xmlns:err="http://www.bea.com/wli/sb/errors">
<err:faultcode xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">soapenv:Server</err:faultcode>
<err:faultstring>
Unable to add security token for identity
</err:faultstring>
</err:WebServiceSecurityFault>
</con:details>
<con:location>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault> -
Pointing Stick cable clip lost - how to replace?
Hi,
I bought a used HP 8440w in very good condition, except the pointing stick does not work and some of the keys on the keyboard were not consistent functional.
When I opened up the laptop, I saw that the clip on the keyboard zif ribbon cable was only half on. I've fixed the keyboard issue now by securing the keyboard zif cable clip. The ribbon cable for the pointing stick was loose because the clip was missing. There is no way for me to secure it.
Can I just order a clip instead of ordering a whole replacement keyboard?
The keyboard is perfectly fine now. I don't want to pay $50+ just to replace a tiny plastic part.
Thanks in advance for your help!Hi Qnana,
I understand you are in need of a part for your HP 8440w. If you look at this site, you should be able to find the part if its replaceable.
http://partsurfer.hp.com/search.aspx
If not to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at
http://h30499.www3.hp.com/hpeb/
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Just bought a 2540p and although the pointing stick works fine as a pointer, it does not 'press-to-select', as my 2510p does.
Should the 2540p have 'press-to-select' on the pointing stick or not? Many thanks.To answer my own question in case anyone is ever interested... Yes, the 2540p pointing stick does have 'press to select' - but only if you have the right driver on the machine! Mine came with a crippled one.
-
Problem configuring RVS4000 router
I just purchase the Cisco Router RVS4000 vpn and I am having problem configuring the VPN option. I just try all way I could imaging, but somehow something are missing and I don't know what it is. Here are a image of my current configuration.
Without examining this in detail, it is only half of the equation. The other end of the tunnel needs to be configured as well. BTW, don't ever post your WAN IP and shared key in a public forum. Change the key.
-
How is your mouse setup in xorg? (with a trackpad and pointer stick)
I have found plenty of information on the web to assist in setting
the pointers in xorg. I have a new Dell D830. It has both
a pointer stick and a trackpad.
I want to make sure I have this setup in a sane way.
I'm wondering if anyone has solved these and wants to post a working
xorg.conf for me to try.
1. Is there anyway to control the speed of the pointer stick? I had to do
xset m 1 1 to cancel out acceleration which made it usable. I can live with
it, but I would like to have more control if possible.
2. The trackpad is working including the vertical scroll on the right. But, double
tapping a word in any editor doesn't select the word, triple tapping selects it for a
second, and then deselects it. It is seen the double clicks, though. I can roll up
a window in Fluxbox by double tapping the title bar.
Note, both the pointer stick and trackpad work somewhat with this single device. I'm puzzled
a bit by this. I have quite a few devices to choose from. /dev/event6 seems to do this.
Or may be it's the SendCoreEvents option.
Currently I'm using this
Section "InputDevice"
Driver "synaptics"
Identifier "TouchPad"
Option "SendCoreEvents" "true"
Option "Device" "/dev/event6
Option "Protocol" "auto-dev"
Option "LeftEdge" "100"
Option "RightEdge" "900"
Option "TopEdge" "100"
Option "BottomEdge" "900"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "1.16"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "TouchpadOff" "0"
Option "CircularScrolling" "on"
Option "CircScrollTrigger" "0"
EndSection
available devices
crw-rw---- 1 root root 13, 64 2007-09-09 22:38 event0
crw-rw---- 1 root root 13, 65 2007-09-09 22:38 event1
crw-rw---- 1 root root 13, 66 2007-09-09 22:38 event2
crw-rw---- 1 root root 13, 67 2007-09-09 22:38 event3
crw-rw---- 1 root root 13, 68 2007-09-09 22:38 event4
crw-rw---- 1 root root 13, 69 2007-09-09 22:38 event5
crw-rw---- 1 root root 13, 70 2007-09-09 22:38 event6
crw-rw---- 1 root root 13, 71 2007-09-09 22:38 event7
crw-r--r-- 1 root root 13, 63 2007-09-09 22:38 mice
crw-r--r-- 1 root root 13, 32 2007-09-09 22:38 mouse0
crw-r--r-- 1 root root 13, 33 2007-09-09 22:38 mouse1
crw-r--r-- 1 root root 13, 34 2007-09-09 22:38 mouse2
crw-rw---- 1 root root 13, 128 2007-09-09 22:38 ts0
crw-rw---- 1 root root 13, 129 2007-09-09 22:38 ts1
crw-rw---- 1 root root 13, 130 2007-09-09 22:38 ts2Firefox 8 is here
* getfirefox.com
check Google toolbar incompatiblity article
* https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox -
Nokia usb internet stick C-12 configuration problems and internet sharing
While set up is said to be simple, once done and you are connected the problems start when you are disconnected and try to reconnect, sometimes you can, but in the majority can't, which requires you to restart the computer, however the computer tends to freeze so you have to shut it down by holding down the little silver button. At the same time the Nokia program, which self installs itself in Network connections, has established up to 3 Links in "Location" and deleting two of them does not help, they soon re-establish themselves.
Any advice on how to configure this unit would be very much appreciated as its my own link to the outside.
In addition, when using previous USB internet keys I have been able to use internet sharing for my iPod Touch, but am at a loss with the C-12.I had already done this and a blog by brightpointuk, on page four, setting out in pictorial format the installation helped, but did not suggested what the conflict may be after your link is dropped and you try to reconnect several times, failing this you then try to restart the Mac, but it freezes, which results in you having to press the top right silver shut down button, in the process I have seen a notice to say the C-12 won't shut down and needs to be forced quit, but as the Mac is frozen you can't do this. Once restarted its possible to reconnect until the next event and then the process may have to start over again. Thanks for the suggestion.
-
i had the mega stick 511 with the firmware version 2 and i updated it to version 3 and it stop working. now when i plug it into the pc it won't even detect it or recognize it to undo the updated version 3. what can i do so it will detect it, once it detected it as smp3 device but when i tried to undo the updated version it appeared an error window. what can i do?!?!?!
FINALLY, THE SOLUTION
I have a brand new Megastick 511 USB 2.0 without FM, and I could get version 3.x firmware update done.
My PC config is...
ABit KV8 Pro Motherboard,
512MB kingston RAM,
Athlon64 2800+,
OS Win XP SP2 with every single update released,
but frankly, I don't believe this problem has anything to do with machine configuration, USB or OS issues. It's merely a question of doing the right thing. Of course, I'm assuming your USB is really 2.0 and you downloaded the right firmware and unzipped it to the MS-5511 folder, as stated in the manual.
Ok, folks. After having this very same problem for a few days, I finally figured it out. Yeah, I wanted this playlist feature this bad, and it's worth the price.
Problems were...
1- Device was not recognized as a USB 2.0 device, no matter the USB motherboard drivers were installed;
2- As soon version 3.x firmware updates were done, I got the old 'deadbrick' effect - oh, yeah, no lights or sounds out of the brand new player - which could be reversed with the old firmware, the one supplied with the CD.
What I did to have the playlist feature was...
1- Took the battery OUT;
2- Using the cable supplied, I pressed and held the play/pause button and kept it pressed until procedure was completed;
3- Inserted the cable in a USB;
4- Windows showed the old 'hey, this device could be faster, blah, blah' message - just ignore it, as I did!
5- Go to the MSI MS511 MEGA STICK Update program;
6- This is very important... at this point, it would be nice if the software could recognize the device, but IT DOESN'T! You will get a message saying 'Media state not started' or something like this after quite a while waiting. This mean it won't show your current firmware version! Once again, ignore it!
7- Well, since the 'start' button was there, I clicked on it, AND I WAS AMAZED TO SEE THE UPDATE BEING DONE! Ok, I didn't wanted to format the device, as it was full of good music, but even unchecking the format option, the software keep saying this had to be done in order to upgrade the firmware - a fair price;
8- As all the copying and writing and verifying processes were done, I knew procedure was over, as the new 3.x firmware version was showing, and I could finally copy more tunes into my 511-now-with-playlist device! Only at this point I released the play/pause button.
Now, when I connect the 511 to the PC, Windows continues saying the device could be faster, but the Update software recognizes it immediatly! And for 512MB of stuff, it takes around 12min to transfer - as it did before - just in case you wanted to know.
Enjoy, my friends! -
3D Rotating on it's own center axis problem...
Need some help here. This is my first time using 3D in flash.
I have a movieclip (picture 80 x 80 pix) that I am tweening to look like it is rotating like face of a cube.
What I did:
1. I transformed the z-axis to "raise" the picture off of the y axis.
2. Then I rotated it around the y-axis from one end of my tween to the other.
Looks great when I scroll through the movie clip's time line but (starts on right almost paper thing, rotates to center square, and continues to the left again paper thin) The problem is when I place it on the stage and preview the swf, it rotates around its own center point and not the offset y-axis.
If I convert it to frame by frame animation, it works but I don't want to do that.
Please advise someone.
Thanks!Sorry if I don't' quite get it, but my other thread was about the movieclip defaulting to the stages coordinates. In this case my movieclip's animation is rotating around the symbols center point and not around the y-axis as I would like.
I can move the transform the symbol from axis point to another and it is fine but in this case i am only rotating it but after I placed is away from the y-axies. I expect it to "orbit" around the y axis continually facing it...and it does when I move through the tweaned frames, but when I publish the swf, it no longer "orbits" around the y-axis but rather just spins around it's center point.
I hope this is a little clearer, and thanks for your other answer. I'll plug that code in as soon as I can.
Maybe you are looking for
-
Ideapad U110 - External DVD Player not working with Windows 7
I did a windows 7 upgrade on my U110 and now the external DVD drive will not function. The computer recognizes that a DVD driver is plugged in (in an explorer folder) but Windows 7 doesn't register the DVD when I plug it in and the computer cannot re
-
In the item table passed to BAPI_PO_CREATE, there is a column called PO_PRICE in the structure PAPIEKPOC. An "X" in this field tells the system not to step on the PR price with the PIR price. So first question: is thre an equivalent of this field in
-
When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation. This is a home PC and I am the administrator. Any help would be appreciated.
-
Address verfication and internet
Can someone please help??? We have been trying to get internet since november. Everyone on my street has it, a new house going up is getting it. I even chased the poor tech down the street. He said to keep calling. Which I have, along with chat e
-
I am getting the following error message Email address is already verified for another Apple ID How do I fix this or get rid of any old apple ID's that I have accumulated over the years