PS CC 2014 requires less than what my laptop is capable of, but still says "not enough ram". Help?
I have an Acer Aspire with Windows 7. I downloaded Photoshop CC 2014, which said it's requirements were less than what my laptop has, plus I upgraded the ram to 8 already. If I go to lighting, it opens, stalls, then says not enough ram, and another message about making sure things are enabled, etc etc, which I have already done. What do I do?
It says ram on one message, and talks about graphics card on another. The first message that pops up says the 3D feature require that "use graphics processor is enabled in the performance preferences. Your video card must meet the minimum requirement and you may need to check that your driver is working correctly. Once that message is closed the next message that pops up says unable to perform function you do not have enough RAM.
Similar Messages
-
All I really do is watch movies on my iPad I will download two movies watch then delete knowing I can redownload we'll did that last night deleted and know that I'm trying to download a movie I just bought it's saying not enough storage when in general it saying I have 2.7 left I'm not that good with these kind of things but someone please help I have no apps downloaded no music movies some pics but that's it I don't understand
Ashley ....
if you reset all settings, you will not lose anything at all. You will have to reset all of the device preferences again like your chosen wallpaper, your privacy settings, whatever settings in the Settings app that you changed from the factory default, will have to be entered again.
You will not lose any data, movies, songs, etc. I responded to your first post and told you that I'm not sure it will work anyway, it's just a suggestion. If you are not comfortable doing it, then don't do it. -
Should I settle for less than what I am paying for...
A couple of months ago I upgraded to BT Infinity 1 Unlimited. The package was for speed of between 25 mb to 35mb.
As I was only getting on average 15 to 16 mb on one occasion 12.8mb. I rang and BT who sent an engineer out. On checking the HD box the engineer made improvements at the box. and now sometimes I get between19mb to 21mb. The engineer said that as the box is 436 metres away from my house I would never be able to get even the lowest speed of 25 mbps.
I have just run the BTW TEST which reads as follows
Download speed 20.90
MAX 22.9
For your connection the acceptable range of speeds is 16.3mhps--22.9mhps.
Upload speed during test 3.75mbps
Upstream rate IP profile for your line is 10mbps.
Do you think I should settle for less than what I am paying for.
Solved!
Go to Solution.Thanks for your reply,
I have been with bt for over 40 years and have great service from them. I know a lot of other users have bigger problems.
It was just that the advert on line said 25 to 35 mhps and I was hopeing that I would not have to keep watching the little circle going round and round before opening a page.
I buy and sell racecards on ebay and most times bid on things in the last few seconds and slow turning of the pages does not help. , -
Why is wired memory less than what's used?
why is wired memory less than what's used?
A whole lot of the stuff you use can safely be paged out and back again with impunity. Wired memory is memory that cannot be paged out to Disk.
Using Activity Monitor to read System Memory and determine how much RAM is being used -
SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu -
after restore i reached in the "choose a network" than i trying to connect to itunes but it could not work forword ..what to do..please tell??
after restore i reached in the "choose a network" than i trying to connect to itunes but it could not work forword ..what to do..please tell??
iPhone 4 -
Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
I iphone keeps saying not enough storage...go to settings. Not sure what to do. I have the 5 iphone
My iphone 5 keeps saying not enough storage to backup. go to settings. not sure what to do. Can not update my phone?
Turn on computer
Open itunes
Connect iphone
Select less content to sync
Sync -
Trying to connect Airport time capsule to my leopard iOS mac. Downloaded software for time capsule for snow leapard/leopard but still says I need more software. What do I need? I have a 10.5.7 iOS (Leopard). It connects to wifi at speeds in the airport and has plenty of storage capacity and memory.
If your Time Capsule looks like this..
Please review the System Requirements to set up and administer the device.....
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and Airport Utility 6.3 or higher
http://www.apple.com/airport-time-capsule/specs -
I ordered two iphone 6 devices on 10/1/2014, one has shipped and will arrive tomorrow, the other is still saying ship by 10/24. Others have already gotten their phones and I am still waiting, even received the envelope to send my old phone back for trade in program but still no word on my iphone shipment? What is going on?
Hi Brian1676,
I am sure that you are excited about the arrival of your new phones. I don't blame you! We are certainly working hard to get these out as fast as we get shipments in from Apple. Have you checked your order status' here: http://bit.ly/RjmCUB? This is the most up to date information that we have available. Once the device becomes available in our warehouse, we will ship it out to you. I hope you receive it soon!
JenniferH_VZW
Follow us on Twitter @VZWSupport -
i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs. Everything was purchase through itunes so i'm not sure what the issue is.
What settings do you have in iTunes? Is it set to sync all music, it is set to sync only checked songs? Is there anything different about the songs that it is not syncing. Is it possible they were they purchased with a different Apple ID?
-
The macbook reads a disc, and opens up DVD player but then says not permitted when I hit play, or any other button. Sometimes the initial music plays, but the screen remains black and then it all stops. These are shop bought DVD's that have previously worked on here, and work in DVD players, but have suddenly stopped. The computer is much older than the12 months warantee so I hope there is an easy fix? Thankyou!
Three things you can try:
1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
2. Perform an SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273
3. Try the free DVD player VLC:
http://www.videolan.org/vlc/
which performs better than the built-in DVD Player. -
My Toshiba laptop just recently started showing the the following error message when I try to open iTunes: " iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)". I did what was requested and reinstalled iTunes, but still get this error message. Help!
b noir I never got any message about an entry point
Many thanks. If we're looking at a "naked" Error 7, I'd start with box two in the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I upgraded to an Iphone 5 and open new Icloud account, I then backed up my phone on my brothers Mac Pro, I now want to restore my info to my phone and I get a message that says not enough space. What do I do
Delete all back ups on MacBook and create new back up. Restart his MB and attempt to restore again. Do not forget to erase your iphone 5 before restore.
-
my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help
When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
Is Wi-Fi turned on in Settings > General > Wi-Fi?
Have you tried Settings > General > Reset > Reset Network Settings?
Is it just the home network that the device will not connect to? or any network?
Maybe you are looking for
-
Hi all, I have to add a button to alv list display output to proceed further ( along with other standard buttons like select all/ filer/ sorting etc). can anybody help me please. thanks, sudheer
-
AirPrint no longer works with ios 5?
I can no longer print from my print app print n share. I used this app to Print my "drivers log book" app. Tech support from print n share said Apple took away the feature to print through all print apps that send wifi Straight to the printer. Why wo
-
Hi : Is there any standard smartform for Goods receipt / Goods issue slip ? How to create a customizing form using smartforms when a material document is created and saved . Thx. Raghu
-
Getting the user name and computer name
I've been trying to find out how to do this, but can't seem to get it. I have an AIR application that needs to get the user's login name, and computer name for verification. I can't find anywhere to do this. Is AIR able to get this information? Is
-
How to find out, whether an input document of a process is IRM-protected?
Having an LiveCycle process with an input variable of type document. How to find out, whether the document is a standard PDF or an IRM-protected PDF? Thanks, Dilettanto