HT1414 after restore i reached in the "choose a network" than i trying to connect to itunes but it could not work forword ..what to do..please tell??
after restore i reached in the "choose a network" than i trying to connect to itunes but it could not work forword ..what to do..please tell??
after restore i reached in the "choose a network" than i trying to connect to itunes but it could not work forword ..what to do..please tell??
iPhone 4
Similar Messages
-
I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........
This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.
-
Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?
Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60) -
Dear Sir/Madam,
I tried the following but no success:
1. Unplug the sync cable from device.
2. Turned off device (slide to power off).
3. Pressed and hol the Home botton and pluged in the sync cable.
4. Hold Home button until "Connect to iTunes" but this message did not appear
So couldn't go any further than this.
Looking forward for your help please.
Kind regards,
GSiOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
This is an iPad user to user forum. Apple doesn't read or respond.
Cheers, Tom -
I have followed the instructions on the apple support pages and still cannot get my phone to work. It continues to show the iTunes USB picture and is not recognised on my iTunes on the windows PC. When I connect the phone to my iMac it shows no data and says I can restore to factory setting. However if I do this will all my data be erased? How do I get my phone and data back? I have saved most of the photos that were on the phone but all my contact details and messages are stored and I really need to get them back! Would have limited memory on the phone when trying to update caused this problem?
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
My iPad is disabled and I can not input my passcode. what do i need to do? I tried to connect to iTunes, but it will not allow me to connect via compute USB as I cannot input my passcode for the iPad.
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/re-sync your content to it
-
After I tried to update my Ipad mini to the newest update, it kept saying hello on my lock screen in different languages and then when I slide the screen across, it says connected to itunes but it's not doing anything!! By the way my Ipad mini is plugged into my computer and connected to itunes!! Please help me!!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo. -
My Itunes account was hacked and my Apple ID was disabled. I followed the instructions from APPLE to backup and restore from Itunes but that did not work. Any suggestions?? Thanks!!
Are you saying that you contacted Apple support and they instructed you to backup and restore your iPad? Or do you mean that you picked up this information from an online support article? If you spoke to an Apple rep or received these instructions via email, contact them again for further help.
I fail to see how restoring your iPad would enable yoyr Apple ID. -
i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes
No support for jailbroken phones will be given in this forum or from Apple.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and… -
I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora -
My third gen iPad will not turn on.
I tried to reset, and the apple icon appears, but it will not load.
I attempted to restore it through iTunes, but it could not recognize it.
Any suggestions would be appreciated. Of course, it is out of warranty.What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My ipod screen does not light, you can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made him the restoration of production and did not work.
Please I need to know what do I have to do.
RegardsIf you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
iPhone and iPod touch: Unable to update or restore
Note that this requires using the sleep/wake button. If you are not successful then there is nothing else that I know you can do. -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
Folio builder panel error in windows
hi, i have a problem...i have indesign and i work in windows but when open folio builder produce one error and close indesign...what's happens?
-
I had to uninstall and reinstall itunes and now all the music imported from cd's won't play. How can I correct this?
-
Downloading Films from PC to BT Vision
Hi, Can anyone tell me (this may have been discussed before) if movies can be downloaded from a pc to a BT Vision box and watched from the BT Vision box? Thanks in advance.
-
IPod lists multiple listings of 2 albums after I sync
I bought The Joshua Tree (Remastered) [Deluxe Edition] and Live from Paris from iTunes almost two years ago. This year I decided to purchase The Unforgettable Fire (Remastered) [Deluxe Edition] and upgrade all of my U2 Remasters to iTunes Plus. I ALW
-
Workflow not Trigerring after kernal upgrade
Hi Experts, Recently basis team has upgraded the Kernal in SRM environment.I was going through whether entire process in SRM is working fine or not. I found that workflow is not working properly.Once i create a SC in SRM,system shows the status as Aw