PS CC 2014 Win: LCS files?

I'm used to use .lcp lens correction profile files with Lightroom and have produced some myself, but I wonder how the correction works with the Photoshop lens correction filter: The manual says that I need .lcs files, and it even tells me where to put these files in the file system, but I only have files with .lcp suffix (lens profile creator makes it that way) that don't seem to work when I put it where the manual says...
Andreas

If I drag a .jpg or .png in to Ps, nothing opens.
If I use 'File -> Open' and select .PSD, .jpg,, .png, nothing...
If create a new document, still nothing.
All these scenarios work just fine when not logged in to the company network.
I've uninstalled/reinstalled Ps, updated all Dell drivers.

Similar Messages

Slow applications start from win 2012 file server using win 7 workstations

I hope someone can help me with why applications are slow to load i have replaced a 8 year old server running win 2003 and replaced it with dell t620 running win 2012 r2 it is like 20 times faster but it is slower than the old server. the office has
7 win 7 x64 machines all our applications are running from win 2012 file server. The server is set up as following the server runs with two hyper-v machines one machine runs ad, file server, dhcp, dns and printer server and the other is domino server and remote
desktop.
the machine is more than capable but it is not so i started reading after i run out of ideas. i looked every where but the issue is with the server after trying everything else i did a simple test If i go to the application folder and click on it apps load
instantly if i then type a unc path it takes from instant load to 3 and a bit seconds the same as the workstations. The same speed if I use ip address.
network cards are intel
i would really appreciate if somebody has suggestions that i could try
thank you

Hi,
Do you mean that applications in the application folder start slowly when you access the application folder on the Windows 2012 R2 file server from Windows 7 workstations using UNC path or IP address. Do all the files in the application folder have the same
issue? Please create a shared folder on the file server, then access the shared folder from Windows 7 workstations to check if the issue still exists.
You could disable SMBv3 on server 2012 to check if the issue related to SMB protocol.
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
http://support.microsoft.com/kb/2696547/en-us
Warning: We do not recommend that you disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My lightroom 5.5 will not export jpg or any other type of photo from the original RAW/NEF uncompressed file. I get a message saying there is a Win 32 "file missing." I unistalled 5.5 and reinstalled 5.4 and it works fine. What to do? Anyone else have

LRoom 5.5 does not export files under any circumstances. I've chosen different locations; putting it in Lightroom NEF to JPG, putting it in another program, same conversion.
I get a "win 32 file missing.....". I did not copy that message as it was not complete. I uninstalled 5.5 and reinstalled 5.4 and it works just fine. I didn't notice any difference to begin with. Minor fixes for a few cameras and lenses.
Not being able to export is a SERIOUS problem and its not with my computer. If it worked for the last 3 years, it must be with 5.5.
Any ideas? Thanks for you input and help. Also, how does one get Adobe to interact directly with its customers rather than having the blind leading the blind??
Thanks

99.9% (estimated) of Lr5.5 users are not having the problem you are (can't export).
That said, for this type of problem, you may want to consider Adobe technical support instead of the forum - I prefer chatting..
If you want some advice from a fellow blind user: try renaming your preferences file (and all other Lr data files if preference file doesn't make a difference, try a new catalog if still no luck). If still the same error, consider posting the rest of that error message - it could be you just need another "win 32" file not being installed by Lr installer, but without knowing the filename, it's kinda hard to say.........
Preference and other file locations in Lightroom 5
PS - the logic: "no problem til Lr5.5, so Lr5.5 code at fault" sounds good on the surface, but is surprisingly flawed - perhaps you should consider yourself lucky the other versions worked despite the potential for problem, rather than considering yourself unlucky that you got nailed when upgrading to Lr5.5 .
Don't shoot the messenger ,
Rob

Adobe Edge CC 2014.1 .js files overwrites html content

I created animation .js files on Edge 2014.1, made a static HTML file in Dreamweaver where I have DIV’s with content (text or image). Example <div>DummyText</div>.
But Edge CC 2014.1 .js files overwrites DIV’s content. In browser DIV doesn't have text. Old version Edge CC works fine.
Is it a bug or very nice feature?

How are you inserting the Edge animations into Dreamweaver html page?
There is a proper way to do that. See @ http://helpx.adobe.com/dreamweaver/using/import-edge-files.html

Pdf arrives as win.dat files on iphone and ipad

Pdf arrives as win.dat files on iphone and ipad. When i send from my pc using outlook

You are probably sending the email in rich text format with attachments (http://support.apple.com/kb/TS1506)
- either try sending it in a different format, or try one of the apps from the app store that support winmail.dat

Photos Received as win.dat File

I have tried to e-mail photos to myself and in many cases they arrive as win.dat files and not jpeg files. Other times they arrive OK. Does anyone know why this is happening? I'm assuming it is related to file size, but I'm not sure. Is there a file size limit?
Thanks.

http://www.joshjacob.com/mac-development/tnef.php

RWD for noevalley,com worked on DW 2014, Win 7 ultimate (IE

Any one else have this problem?
RWD OK in Adobe 2014, ok in Safari, ok in Win 7 Ultimate (IE and FF), ok on Desk Top (IE and FF).
Bad in Tablet and phone in FF and IE in 8.1
Isolated problem by commenting out and problem was one banner not resizing (the banner does resize in Win 7 IE and FF).
I will ask the banner owner but this will not be a priority for him.
Thanks

Hi Nancy O
I have NO intention of doing anything with the boilerplate.css. I read the "phone first" post on RWD and fully trust the, don't touch commenhts from that developer (and everyone else)
Just odd that it worked in DW CC 2014, Win 7 (FF and IE) and iMac Mustang (S) and failed in Win 8.1 (FF and IE) for tablet and phone while working in desktop (simulation) and began to function everywhere when the img was pulled.
I was going to say THWI but thats not fair. You guys have helped me.
I took the comment off.
www.noevalley.com
Fine in Winn 7 and the iMac and DW live.
I am focused on the banner and thats not mine. I do not have a problem dropping it from the page. I will comment it out about 6 pm Pacific time.
If you just want a copy of the graphic, it is at /graphics/weiner.jpg
Peace
ed

Updated to 2014-now preview files won't load

I render all my files, close Ppro and when I re-open the project, I get the red bars and have to re-render everything. Clearly I can't continue on this way and my research on this forum hasn't turned up an answer although I see that others have had the same problem. Ppro has been very stable for me on my Win 7 system up until this 2014.2 update.
This is a real show stopper for me. Does anyone have any thoughts on this? Thanks.

I found the file and deleted it. I now get a cache directory choice window but the program still hangs on the intro screen. So, still no run.
Thanks.

Media Encoder CC 2014 Exports larger file than Media Encoder CC with same settings

We like to deliver final exports to most of our clients with the following settings:
Format: Quicktime
Codec: H.264
Quality: 100
1920x1080, 23.976, progressive, square pixels
use maximum render quality
audio: uncompressed, 48khz, stereo, 16 bit, single track
When I used to export a ~5 minute video using these settings with Premiere or Media Encoder CC (7.2.2.29), I would get a file ~1GB. If I export a ~5 minute video using these settings in Premiere or Media Encoder CC 2014 (8.0.1.48), the result is ~ 4GB.
Any thoughts on why this might be? I assume it's a user error but I can't nail down what it is.
Thanks for your help!

Hi matthewrichie88,
I used the same settings that you have mentioned above on a Windows 7 computer and got the same file size with both versions of Media Encoder. Please specify if you have a Mac or a Windows and which OS exactly? It would really help if you can post screenshots of your export settings with both versions. Give more details about the source files as well.
Thanks!
Rameez

How to export a video at a moderate certain format and size in premiere CC 2014: No Huge File Results!

I have the latest version of Adobe Premiere, CC 2014 but whenever I want to render and export a video that is typically 70 megabytes in size I can't seem to always see how big the file will end up being for all the formats and I don't want to end up with a video larger than 250 to 300 megabytes in size just for the extremely best or highest quality even though I want the video to be well polished and in better quality than I usually get thee, These videos are usually imported as mp4. What file version of mp4 or otherwise would give me an originally imported video of 70 megabytes an output of no more than or around 300 megabytes or even less without compromsing video quality? I don't want a huge file size as I am uploading it to my YouTube channel via their web interface on another person's machine and they don't have Premiere and only has a DSL connection. So what video output settings should I use for a good quality video that isn't smaller than the original but the same size or a bit higher and not extremely large like MOVs and sometimes mp4s usually are depending on what you do to it and it is outputted.?

Export
Format: H.264
Preset: YouTube (make sure this matches the dimensions of your sequence)
You could further adjust the Target Bitrate but the preset is already setup for a good quality file for upload.
You can also do further reading on Video Bitrates.

Power Pivot Configuration error while refreshing connection on excel sheet for SharePoint 2013 and Sql server 2014 using BISM file connection

I am getting following error while refreshing connection on excel sheet in power pivot gallery,
my scenario,
using BISM file connection to create and refresh power pivot excel sheet in power pivot gallery
throws error and we have sql server 2014 CU6 updated installed plus sharepoint 2013. i checked following msolap110.dll is available in our environment but assembly
Microsoft.AnalysisServices.ChannelTransport is not available.
i found error in event viewer,
"Activation context generation failed for "C:\Program Files\Microsoft Analysis
Services\AS OLEDB\110\msolap110.dll". Dependent Assembly
Microsoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
what should i do to fix it?
Thanks for help.
Deepak Patel

Rebecca,
yes, this is issue i am getting.
Activation
context generation failed for "C:\Program
Files\Microsoft Analysis Services\AS OLEDB\110\msolap110.dll".
Dependent AssemblyMicrosoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
let me know if you can find fix for it.
THanks,

Illustrator CC 2014 "Exception in file" error with linked images

It appears some images are showing "Exception in file" error dialog boxes.
If I resave the image in Photoshop or link it to a different image the error disappears.
Happened with:
- old design files linked to old images
- image that was dragged from Mac Mail
- linked to JPG provided from other users
Does not happen with:
- images created recently with Photoshop CC or CC 2014
Here is the error:
Has anyone else seen this and/or found a solution?
This is an error on a new Mac Pro with brand new install of all software. No older versions of cc installed. Just CC 2014.

That's a good idea. Unfortunately, same problem if I move the image to desktop or same folder as file.
If I resave the file (JPG in this case) the error disappears.
I understand this can be the solution, but given this issue had not happened before, it's interesting it is happening with CC 2014.
Attached is the image in question. Note that this is not the only image. It has happened with older design files that were made from older versions of cc or before cc.
I'm not sure if the uploader will recreate the JPG so I'll compress the file and is available here if anyone would like to test.
Dropbox - photo 2.JPG.zip

InDesign CC Server 2014 app.open() File does not exist.

I've set up InDesign CC Server 2014 trial on a Windows Server 2008 R2 and trying to run a simple script that converts a idml to PDF.
Here's the code
document = app.open(File("C:\inetpub\wwwroot\presentation\Documents\Resumes.idml"));
document.exportFile(ExportFormat.PDF_TYPE, File ("C:\inetpub\wwwroot\presentation\Documents\file.pdf"));
document.close();
I'm running the script in ExtendScript Toolkit CC and it gets hung up every time on the first line, open() method.
I've verified the path and permissions are fine as other scripts work that write output, such as this one.
//HelloWorld.jsx
//Create a new document.
var myDocument = app.documents.add();
//Get a reference to the first page.
var myPage = myDocument.pages.item(0);
//Create a text frame.
var myTextFrame = myPage.textFrames.add();
//Specify the size and shape of the text frame.
myTextFrame.geometricBounds = ["6p0", "6p0", "18p0", "18p0"];
//Enter text in the text frame.
myTextFrame.contents = "Hello World!";
//Save the document (fill in a valid file path).
myDocument.save(new File("/c/HelloWorld.indd"));
//Close the document.
app.documents.item(0).close();
No problems at all with that script.
Please help!

Figured it out. Path for app.open() needs \\ instead of \.

After Effects cc 2014, problem: swf files not supported

Hi, trouble with loading SWF file into After effects cc 2014, "format not supported" is the message. The same project is opened by another identic Macpro like mine...

Thanks so much Dave. It fixed the problem.
Raoul.

Audio problem with Edge animate CC 2014.1 oam files in DPS 32 (Viewer App in Ipad)

Hi there team,
I can hear no sounds in the Ipad viewer. I think the problem may be the last update of the Ipad viewer app. But not sure if the problem is with the last 2014.1 update of Edge.
The animations work fine in Chrome with onclick but they dont'ty work in the Ipad with the ontouch commands. I also checked that the oam file contains the .mp3 in the media folder (Seems that Edge 2014.1 does this right).
They are actions, not music in the background (I know there's an iOS limitation with this).
Anyone with the same problem? Could you check if your projects work fine after the last updates?
Thanks!
Rubén.

I have just found the same problem. I have an Adobe DPS article that uses Adobe edge that play audio when 'tapped', I built this before the CC 2014.1 update and that one works fine. I have created another article following the same process but using the updated version and the audio will not play.
Both files are placed OAM files. Audio worked fine in the browser during testing.
Please tell me this has not been removed as a feature!

PS CC 2014 Win: LCS files?

Similar Messages

Maybe you are looking for