Ps (list process) command in Solaris 10

Dear all
I'm upgrade from Solaris 9 to Solaris 10 and recently I meet one problem:
In solaris 9, If I want to check the complete command for the running process, I could use
/usr/ucb/ps -auxww
then, the system could gives me everything.
But in Solaris 10, I use the same command, but it seems that system has "cut" the args and I can't get the expected result anymore.
Anybody ever meet such a problem before? could you give me some hints?
Cheers
Shen

Under normal circumstances, the /usr/ucb/ps command is attempting to read the ARGV[0] from the process itself. This string can be long, but is under the control of the process (it can change it while it runs). Also, because of security issues, reading this data requires process privileges (usually have to be the owner or root).
If privileges do not exist, ps will fall back to using the kernel buffer holding the first 80 characters of the exec string. This string is potentially shorter, but not under the control of the process, and no security restrictions exist for reading it.
Besides /usr/ucb/ps, you can use 'pargs <PID>' to view this string. Of course if privileges aren't held, it won't tell you anything new. But it may be more explicit in telling you that fact, rather than silently substituting the kernel string instead.
$ pargs 597
pargs: cannto examine 597: permission denied
Darren

Similar Messages

Call an other dynpro after list-process. with a button in the functionmenu

Hi expert-forum-members
in my report I start a DynPro after the starting-point "start-of-selection":
START-OF-SELECTION.
CALL SCREEN 100.
In the screen 100, I want to show a simple list like that:
module pbo_0100 output.
SET PF-STATUS 'SCREEN_100'.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
PERFORM lief_lfa1.
PERFORM kunden_kna1.
LEAVE SCREEN.
endmodule.
In the "PF-STATUS" I defined a button which should call another dynpro with a ALV-List. But when I am debugging the "list-processing" screen I could not catch any sy-ucomm event?!?
If I comment the two commands ("LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.","LEAVE SCREEN. LEAVE SCREEN.") out, then the buttonfunction is correct.
So how can I use a button by using the "LEAVE TO LIST-PROCESSING " command?
Regards,
Steffen

Hi Steffen,
The logic:
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
PERFORM lief_lfa1.
PERFORM kunden_kna1.
LEAVE SCREEN.
shold be inside a PAI module an not PBO module.
pai.
module user_command_0100.
in program:
module user_comman_0100.
case sy-ucomm.
when '<Fcode for the button>'.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
PERFORM lief_lfa1.
PERFORM kunden_kna1.
LEAVE SCREEN.
endcase.
endmodule.
Regards,
Ravi

Command to List Oracle Instances on Solaris 10

Hello
New to Oracle Solaris. I am looking for a command that will display all the installed instances of applications on Solaris 10. Can someone list the commands...Thanks

This is a surprisingly difficult question to answer. See Re: List of databases in Server (among many)
Edit Oh, I just noticed the "applications." That's different. What exactly do you mean by "applications?"
Edited by: jgarry on Sep 18, 2012 9:18 AM

Command leave to list processing

Dear All,
I have an executable program (execute via SE38) that need to call an additional screen for input before the actual output on sapscript.
It is like this, user key in the input into selection screen, then program will extract data and display them into a pop up window. User will further select data from the pop up, and then sapcript will be printed out eventually.
I'm now stuck at the pop up window. I created a new screen 9000 with screen type "Modal dialog box" and coding as follow:
Executable program:
CALL SCREEN 9000 STARTING AT 40 20
                   ENDING   AT 150 50.
Flow Logic:
PROCESS BEFORE OUTPUT.
MODULE STATUS_9000.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_9000.
Coding:
MODULE STATUS_9000 OUTPUT.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 9000.
SET PF-STATUS 'STATUS_9000'.
LOOP AT TAB INTO WA_TAB.
    WRITE:/1 WA_TAB-TYPE.
ENDLOOP.
ENDMODULE.                 " STATUS_9000 OUTPUT
MODULE USER_COMMAND_9000 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'OK'.
******** trigger output to sapscript
    WHEN 'CANCEL'.
      SET SCREEN 0.
      LEAVE SCREEN.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
With the above code, output is successfully displayed on screen 9000 with command "Leave to list-processing". But after the list displayed, those buttons that defined in Status_9000 are not working at all in screen 9000. There is no response from any buttons i clicked, even i tried in debugging mode it didn't go in debugger as well.
Please comment which part i miss. Thanks.

Hi,
I think the problem is with your statement in the PBO module.
Why not try and delete this part 'AND RETURN TO SCREEN 9000'. Over here, if you want to use this addition RETURN TO SCREEN, then screen number should be other than your modal list screen. Currently you have changed the modal screen to behave as list, but at the same time, you want it to behave as the normal screen, after you come back from the list.
If you really need that, then please create another screen, say 9100, and change it to AND RETURN TO SCREEN 9100, instead of AND RETURN TO SCREEN 9000.
Regards,
Lim...

Sysdef command in Solaris 10.

Hi All,
sysdef command in Solaris 10 ( 5.10, s10_58 ) no more reports the message queue related Kernel
parameters i.e msgsys:msginfo_msgmax ( MSGMAX ) etc. For more info refer the link below :
http://docs.sun.com/db/doc/816-7137/6md5paukq?a=view
Since sysdef command no more reports the above parameters, what is the other way we can get the
same in Solaris 10? We have written our script in such a way that it greps for MSGMAX from the outcome
of sysdef and gets its value and perform certain operations. Quick reply would be greatly appreciated.
Thanks

We have written our script in such
a way that it greps for MSGMAX from the outcome
of sysdef and gets its value and perform certain
operations. Quick reply would be greatly appreciated.msgmax (maximum per-message size) has been removed completely -- there is no equivalent on Solaris 10. Instead, the
maximum total bytes on the queue, process.max-msg-qbytes (previously msginfo_msgmnb) is the only restriction on what can be placed in a SysV message queue.
To retrieve the current value of this in a script, you can use:prctl -P -n process.max-msg-qbytes -t privileged $$ | tail -1 | read x x value x x xNote that this is no longer a system-wide tunable -- the administrator can control this on a per-project basis. (see projects(1))
- jonathan

How to display list process, when i run sql*loader in c#

Hello,
How to display list process, when i run sql*loader in c#. I mean when i run sql*loader from cmd windows, i get list process how many row has been inserted. But when i run SQL*Loader from C#, i can't get process SQL*Loader.
This is my code:
string strCmd, strSQLLoader;
string strLoaderFile = "XLLOAD.CTL";
string strLogFile = "XLLOAD_LOG.LOG";
string strCSVPath = @"E:\APT\WorkingFolder\WorkingFolder\sqlloader\sqlloader\bin\Debug\8testskrip_HTTP.csv";
string options = "OPTIONS (SKIP=1, DIRECT=TRUE, ROWS=1000000,BINDSIZE=512000)";
string append = "APPEND INTO TABLE XL_XDR FIELDS TERMINATED BY ','";
string table = "OPTIONALLY ENCLOSED BY '\"' TRAILING NULLCOLS (xdr_id,xdr_type,session_start_time,session_end_time,session_last_update_time,session_flag,version,connection_row_count,error_code,method,host_len,host,url_len,url,connection_start_time,connection_last_update_time,connection_flag,connection_id,total_event_count,tunnel_pair_id,responsiveness_type,client_port,payload_type,virtual_type,vid_client,vid_server,client_addr,server_addr,client_tunnel_addr,server_tunnel_addr,error_code_2,ipid,c2s_pkts,c2s_octets,s2c_pkts,s2c_octets,num_succ_trans,connect_time,total_resp,timeouts,retries,rai,tcp_syns,tcp_syn_acks,tcp_syn_resets,tcp_syn_fins,event_type,flags,time_stamp,event_id,event_code)";
strCmd = "sqlldr xl/secreat@o11g control=" + strLoaderFile + " LOG=" + strLogFile;
System.IO.DirectoryInfo di;
try
System.Diagnostics.ProcessStartInfo cmdProcessInfo = new System.Diagnostics.ProcessStartInfo("cmd.exe");
di = new DirectoryInfo(strCSVPath);
strSQLLoader = "";
strSQLLoader += "LOAD DATA INFILE '" + strCSVPath.ToString().Trim() + "' " + append + " " + table;
StreamWriter writer = new StreamWriter(strLoaderFile);
writer.WriteLine(strSQLLoader);
writer.Flush();
writer.Close();
// Redirect both streams so we can write/read them.
cmdProcessInfo.RedirectStandardInput = true;
cmdProcessInfo.RedirectStandardOutput = true;
cmdProcessInfo.UseShellExecute = false;
cmdProcessInfo.LoadUserProfile = true;
//System.Diagnostics.Process.Start("CMD.exe", strCmdLine);
// Start the procses.
System.Diagnostics.Process pro = System.Diagnostics.Process.Start(cmdProcessInfo);
// Issue the dir command.
pro.StandardInput.WriteLine(strCmd);
// Exit the application.
pro.StandardInput.WriteLine("exit");
//Process[] processlist = Process.GetProcesses();
//foreach(Process pro in processlist){
Console.WriteLine("Process: {0} ID: {1}", pro.ProcessName, pro.Id);
Console.WriteLine(pro.StandardOutput.ReadLine());
// Read all the output generated from it.
string strOutput;
strOutput = pro.StandardOutput.ReadToEnd();
pro.Dispose();
catch (Exception ex)
return;
finally
Thanks.

friend
sqlldr is an application residing in the OS. procedure runs in the dbms engine.
you cannot run an os command directly from a procedure or a function or a package .
If you want to do so you need to use either a daemon process created by a PRO*C program
or a JAVA stored procedure to do so.
just refer to previous question forums, you can find the solution. Somebody has already given a solution using
java to run an OS command . check it out
prakash
[email protected]

Return to List Processing From Business Object Method CTREQUEST.Display

I have a simple program which displays selected TRKORR (Transport/Correction) numbers in a list on the screen. I want to be able to double click on the number and inspect the contents of these items.
The program is not pretty - its for my use only.
Anyway, the code below is tucked at the end of my program, and it works fine - double clicking will display the request. .
FORM SHOWCTS USING P_REQ.
DATA : ThisReq      TYPE SWC_OBJECT.
DATA : ReqObjectKey Like SWOTOBJID-OBJKEY .
SWC_CONTAINER        REQCONTAINER.
SWC_CREATE_CONTAINER REQCONTAINER.
move p_req to ReqObjectKey .
SWC_CREATE_OBJECT ThisReq 'CTREQUEST' ReqObjectKey .
SWC_CALL_METHOD   ThisReq 'Display'   ReqContainer .
ENDFORM.
AT LINE-SELECTION .
data l_req type TRKORR .
move sy-lisel+29(20) to l_req . CONDENSE l_req NO-GAPS .
perform showcts using l_req .
The problem is, when I exit from the CT Request, the program EXITs . The desired behavior would be to return to my list processing.
How can I return to my list upon exiting the Request display?
Thanks...
...Mike

Hi,
Try command LEAVE TO SCREEN 0 instead of EXIT.
Thanks.
Ravi

Leave list processing

hi to all sdn people
i know the functionality of the leave list processing
and leave to list processing . but tell how to use them in the screen programs ?pls give
one sample screen program .

LEAVE TO LIST-PROCESSING
Basic form 5
LEAVE TO LIST-PROCESSING.
Addition:
... AND RETURN TO SCREEN scr.
Effect
Switches from "dialog processing" (module pool, screens) of the current transaction to "list processing". You can then use all the usual list layout commands (WRITE, SKIP, ...).
After leaving the current screen, the list formatted in this way is displayed implicitly or explicitly by LEAVE SCREEN. Here, all list programming options are possible, e.g. line selection, F keys, windows.
LEAVE LIST-PROCESSING continues with "Processing Before Output" (PBO) of the screen which controls the list processing.
Note
After switching to list processing mode with SET PF-STATUS ..., you are recommended to define a GUI (Graphical User Interface) of type List or List in dialog box.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition
... AND RETURN TO SCREEN scr.
Effect
LEAVE LIST-PROCESSING continues with "Processing Before Output" (PBO) of the screen scr.
Note
Using LEAVE LIST-PROCESSING to leave list processing explicitly is only necessary in exceptional cases; normally, the standard F keys ( F3=Back and F15=Exit) are sufficient.
Refer the following code:
REPORT demo_leave_to_list_processing .
TABLES demo_conn.
DATA: wa_spfli TYPE spfli,
      flightdate TYPE sflight-fldate.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command_0100.
CALL SCREEN 500.
SET SCREEN 100.
ENDMODULE.
MODULE call_list_500 OUTPUT.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS space.
SUPPRESS DIALOG.
SELECT carrid connid cityfrom cityto
    FROM spfli
    INTO CORRESPONDING FIELDS OF wa_spfli
    WHERE carrid = demo_conn-carrid.
    WRITE: / wa_spfli-carrid, wa_spfli-connid,
             wa_spfli-cityfrom, wa_spfli-cityto.
    HIDE: wa_spfli-carrid, wa_spfli-connid.
ENDSELECT.
CLEAR: wa_spfli-carrid.
ENDMODULE.
TOP-OF-PAGE.
WRITE text-001 COLOR COL_HEADING.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
WRITE sy-lisel COLOR COL_HEADING.
ULINE.
AT LINE-SELECTION.
CHECK NOT wa_spfli-carrid IS INITIAL.
SELECT fldate
    FROM sflight
    INTO flightdate
    WHERE carrid = wa_spfli-carrid AND
          connid = wa_spfli-connid.
    WRITE / flightdate.
ENDSELECT.
CLEAR: wa_spfli-carrid.

ABAP list processing statements in ABAP Objects

Hi,
Based on the Online help "The ABAP statements used for list processing are not yet fully available in ABAP Objects".
Is there any chnage planned about this for the next WAS release?
Thanks,
Peter

Hi Peter
I believe, most of the measures taken are for some compatibility and performance issues. So, there is no need to expect great changes about this.
*--Serdar

Print List Processing Report to PDF

hi all,
i've read many forums about convert info into PDF. but i'm very new to understand those forums.
In case I want to print list processing report as PDF (not hard copy thru printer). First, user types the data on the screen then click on 'Execute' button, then the system shows the result on screen. After that user asks system for print the screen on menu bar by List=>Print.
So please advise me how to get the spool id, then export as pdf. As my opinion, i may use CONVERT_ABAPSPOOLJOB_2_PDF and GUI_DOWNLOAD. But where is the place I should put the methods on?
Thanks in advance.
Peerasit

Hi,
Go through The simple Anallise this program.
report zabap_2_pdf.
*-- Enhancements: only allow to be run with variant. Then called
*-- program will be transparent to users
*-- TABLES
tables:
tsp01.
*-- STRUCTURES
data:
mstr_print_parms like pri_params,
mc_valid(1)      type c,
mi_bytecount     type i,
mi_length        type i,
mi_rqident       like tsp01-rqident.
*-- INTERNAL TABLES
data:
mtab_pdf    like tline occurs 0 with header line,
mc_filename like rlgrap-filename.
*-- SELECTION SCREEN
parameters:
p_repid like sy-repid, " Report to execute
p_linsz like sy-linsz default 132, " Line size
p_paart like sy-paart default 'X_65_132'. " Paper Format
start-of-selection.
concatenate 'c:\'
            p_repid
            '.pdf'
into mc_filename.
*-- Setup the Print Parmaters
call function 'GET_PRINT_PARAMETERS'
   exporting
     authority= space
     copies   = '1'
     cover_page                   = space
     data_set = space
     department                   = space
     destination                  = space
     expiration                   = '1'
     immediately                  = space
     in_archive_parameters        = space
     in_parameters                = space
     layout   = space
     mode     = space
     new_list_id                  = 'X'
     no_dialog= 'X'
     user     = sy-uname
   importing
     out_parameters               = mstr_print_parms
     valid    = mc_valid
   exceptions
     archive_info_not_found       = 1
     invalid_print_params         = 2
     invalid_archive_params       = 3
     others   = 4.
*-- Make sure that a printer destination has been set up
*-- If this is not done the PDF function module ABENDS
if mstr_print_parms-pdest = space.
    mstr_print_parms-pdest = 'LOCL'.
endif.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
submit (p_repid) to sap-spool without spool dynpro
                   spool parameters mstr_print_parms
                   via selection-screen
                   and return.
*-- Find out what the spool number is that was just created
perform get_spool_number using sy-repid
             sy-uname
    changing mi_rqident.
*-- Convert Spool to PDF
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    exporting
      src_spoolid= mi_rqident
      no_dialog = space
      dst_device = mstr_print_parms-pdest
    importing
      pdf_bytecount                  = mi_bytecount
    tables
      pdf        = mtab_pdf
    exceptions
      err_no_abap_spooljob           = 1
      err_no_spooljob                = 2
      err_no_permission              = 3
      err_conv_not_possible          = 4
      err_bad_destdevice             = 5
      user_cancelled                 = 6
      err_spoolerror                 = 7
      err_temseerror                 = 8
      err_btcjob_open_failed         = 9
      err_btcjob_submit_failed       = 10
      err_btcjob_close_failed        = 11
      others     = 12.
call function 'DOWNLOAD'
     exporting
          bin_filesize            = mi_bytecount
          filename                = mc_filename
          filetype                = 'BIN'
     importing
          act_filename            = mc_filename
     tables
          data_tab                = mtab_pdf.
      FORM get_spool_number *
      Get the most recent spool created by user/report              *
--> F_REPID               *
--> F_UNAME               *
--> F_RQIDENT             *
form get_spool_number using f_repid
     f_uname
                changing f_rqident.
data:
    lc_rq2name like tsp01-rq2name.
concatenate f_repid+0(8)
              f_uname+0(3)
    into lc_rq2name separated by '_'.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
    f_rqident = tsp01-rqident.
    exit.
endselect.
if sy-subrc ne 0.
    clear f_rqident.
endif.
endform." get_spool_number
Regards
swamy

Help - Multiple errors occurred on the server while processing commands

I am trying to start ical server on a fresh install of os x server 10.5, but I receive the following error messages: "Multiple errors occurred on the server while processing commands. Use the console application to view the error message" then I hit "ok" and then if i try to enable the iCal service, up pops up another window saying: "an error occurred onthe server while processing a command. Error 'CANNOTLOAD_BUNDLEERR' occurred while processing a command of type 'writeSettings' in plug-in 'servermgr_calendar'
what's going on? how do i proceed to enable the iCal service? here is my error log:
servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:22:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:50 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a398170>
May 25 13:23:50 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:23:51 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a390c30>
May 25 13:23:51 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:58 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3cabf0>
May 25 13:23:58 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'setState' in plug-in: 'servermgr_calendar'
May 25 13:24:04 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396e50>
May 25 13:24:04 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:05 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396370>
May 25 13:24:05 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:24:10 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a38ad80>
May 25 13:24:10 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d6980>
May 25 13:24:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39a0d0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39b2a0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:41:33 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d55b0>
May 25 13:41:33 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:41:34 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3c1ba0>
May 25 13:41:34 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:36 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3835c0>
May 25 13:41:36 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes

no idea how to set up a dns. can you point me in the right direction? thanks

Cannot run zpool (zfs feature) command in Solaris 10 6/06

Hi, I couldnt run ZPOOL command in Solaris 10 6/06. It said command not found.
May I know what should I do? My Solaris 10 version provide Solaris zoning features, but no ZFS feature provided.
How?

check your PATH- the zpool command is in the /usr/sbin directory.
Also, double check you have the zfs packages-
#pkginfo | grep zfs
system SUNWzfskr ZFS Kernel (Root)
system SUNWzfsr ZFS (Root)
system SUNWzfsu ZFS (Usr)

Reg: stat command in solaris 10

Hi Gurus,
Where i can find the stat command in solaris 10.
Any one help is appreciated.

Hi
/opt/sfw/bin/stat
if you do a full install including the Companion DVD.
More importantly, what exactly are you trying to achieve?
Paul

ABAP Mapping - Message shown in Standard Change List Process Log

Hi
I am working with ABAP Mapping program. I had created ABAP class using ABAP workbench. Before this, in exchangeProfile..data was provided for com.sap.aii.repository.mapping.additionaltypes ==>> as " R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine) " and 'Saved'.
In Interface Mapping, after providing the Class Name under 'Mapping Program' and activated. After activation (Standard Change List), it is showing the following messages under 'Processing Log'.
--> Standard Change List - Process Log message
Activation of the change list canceled Check result for Interface Mapping IM_ABAP_MAPPING | http://ABAP_Mapping_SREE: Type R3_ABAP of
program ZSREETEST is invalid because it is not registered in the exchange profile . Check the values for the exchange profile parameter
IntegrationBuilder.Repository.com.sap.aii.repository.mapping.additionaltypes
--> End of Log message
Can some one please guide me in resolving the ABAP mapping issue.
Thanks in advance.
..Sree

Sree,
The log says that there is ABAP mapping included in your exchange profile. Do the things what michal have told and also check your mapping program whether working fine or not in SXI_MAPPING transaction.
You can see this weblog for reference:
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
---Satish

List processing and PF status.

Hi Team ABAP,
i got a problem in List processing.
I´m in a dypro with a table control on it. Users can mark one or more ALV lines and then e.G. press "process".
Something gets done then (some forms get printed), and after that i want to display a protocol.
First i tried to process a simple write list by using WRITE statement.
Coding got processed, but it had no effect, no write list was generated, or at least not shown on my screen.
So i tried to code a "LEAVE TO LIST PROCESSING" right before my first WRITE statement.
Well, now it works my write list is on Screen. But here start the Problem. Like i got told in the ducomentation of the LEAVE TO LIST PROCESSING statement the WRITE list gets processed with the actual active PF status from the dynpro where i came from.
1. This is quite uncool, since i do not need those Buttons in my List.
2. Even if it was ok, those buttons are not working. Typing /h in OK_CODE field and pressing ENTER doesnt help it. When after that i click a button, nothing happens, such as if i didnt click them.
I searched the forum, but i got drowned in thousands of "interactive list" threads and wasnt able to find my required info in an acceptable time of 30 minutes.
Did i do a essential error? Someone got an Idea where i´m stuck or a proposal on how to improve?
Any Help or tip will be welcome and rewared accordingly.
regards

Hi Florian,
Try if you can display the list in ALV where you can maintain the pf-status.
You can check the demo program DEMO_LEAVE_TO_LIST_PROCESSING. In this, it is setting set pf-status to space.
Hope it helps.
Sujay

Ps (list process) command in Solaris 10

Similar Messages

Maybe you are looking for