PSA Data Load Error

I am getting the following PSA error and am currently fixing this error manually. Could someone explain me how to have this in a Process Chain.
<b>failed step: psa cleaning
cause: not able to truncate psa because of inconsistency of data in partition
steps taken: make partition consistent using RSRVand return the load
</b>
Thanks,
Priya

Go to RSRV --> Go to Tests in Transaction RSRV -->PSA Tables -->Consistency Between PSA Partitions and SAP Administration Information## --> give the PSA table name  here and press F8. Once you see errors press on Correct errors button and it shd get fixed.
You shd be able to get the PSA table name from the Process chain step variant..

Similar Messages

  • Most common BW data load errors in production and how to solve them ..

    Hi All,
    Most common BW data load errors in production and how to solve them ..
    Any doc on it ,if so plz send it across to this id [email protected]
    Thanks in advance.
    Rgrds
    shoba

    hi
    1) RFC connection lost.
    2) Invalid characters while loading.
    3) ALEREMOTE user is locked.
    4) Lower case letters not allowed.
    5) While loading the data i am getting messeage that 'Record
    the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
    6) object locked.
    7) "Non-updated Idocs found in Source System".
    8) While loading master data, one of the datapackage has a red light error message:
    Master data/text of characteristic 'so and so' already deleted .
    9) extraction job aborted in r3
    10) request couldnt be activated because theres another request in the psa with a smaller sid
    11) repeat of last delta not possible
    12) datasource not replicated
    13) datasource/transfer structure not active ´
    14) Idoc Or Trfc Error
    15. ODS Activation Error

  • Sap bw 7.3 master data load error

    sap bw 7.3 master data load error
    erroe: Exception in Substep Rules

    Hi Jayram,
    I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
    1. Duplicate records
    PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
    2. Erroneous records.
    Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
    Hope it helps!
    Regards,
    Pavan

  • What are the frequent data load errors in production support?

    what are the frequent data load errors in production support?

    It is a long list. Here is some of them.
    1. Idoc not arriving from source system.
    2. previous processes failed.
    3. change run unsucessful or did not run properly and data in master data is messed up.
    4. invalid characteristics in the data.
    5. Duplicate records found.
    and on  and on.
    Ravi Thotahdri

  • Data Loading Error : ToomanyError records.

    Hi All,
    I got Data Loading error when I am loading from Flat File.
    Following is the error message :
    Too many error records - update terminated
    Error                             18 in the update
    No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
    can anybody help in resolving the issue.
    Regards,
    Chakravarthy

    hi
    Check the format of your charecteristics and key figures .
    Check you put data separators in you flat files approriately
    In the particular charecteristics ZUNIQUEID  ,ensure data is consistent...check the related tables
    Assign points if useful
    Regards
    N Ganesh

  • Data Load error Please respond ASAP

    Hi ,
    When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
    Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
    Any help greatly appreciated.
    Thanks

    Key here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
    Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
    I have had both issues give similar error results.
    J

  • Data load error regarding timestamp

    Hi All,
    I am getting data load error related to time.
    I am using  2lis_02_SCN for CNFTM(time stamp) filed 
    with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
    please send your suggestion as early as possible.
    Thanks
    Rupa

    Hi Rupa,
    Try out following sample code inthe transfer rule for the same info object and it should work
    lv_len  = strlen( str ).
    if lv_len = 4.
    concatenate str '00' into str.
    endif
    Regards
    Kapadia

  • Common data load errors in BI 7

    Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..

    Hi AAL,
    There're lots of loading error posts in this forum. This one I guess is good for you:
    production support errors
    production support issues
    Or you can search yourself using key word common load error etc.
    Hope above helps.
    Regards,
    Frank

  • Data load error--urgent

    hi friends ,
    we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB  update(251new/160 chnaged): Errors occured.
      what should i  know  from information and what are the reasons for this  load failure and possible rectification methods.
    This  load is through  process chains and aslo a delta load.
    Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or  should i repeat from the subsequent process?
    Plz help.
    I award points.
    regards,
    siddartha

    Hi siddharta,
    look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
    Regards,
    Jzergen

  • Data load error  in PSA

    hellow gurus
    i have run the data load for 2lis_02_scl  at  psa level..
    but when i went to RSMO
    i m seein
    Transfer ( Idoc and TRFC) : error occured
    Reuest IDoc : application documented posted
    Info Idoc1: Sent not arrived ,Data Passed to port Ok
    how to resolve this error
    thanks
    points wil be assigned as my gesture
    Regards
    Rahul

    Hi,
    Check SM58 and BD87 for pending tRFCs/IDOCS and execute them manually.
    Transact RFC error
    tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
    Step 1:  Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
    queue thats under outbound processing and click on display the IDOC which is on the menu bar.
    Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
    place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
    (Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
    Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
    to the particular TRFC request for that Idoc.
    OR
    Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
    (For this in RSMO Screen> Environment> there is a option for Job overview.)
    This Data Package TID is  Transaction ID in SM58.
    OR
    SM58 > Give * / user name or background  (Aleremote) user name and execute.It will show you all the pending TRFC with
    Transaction ID.
    In the Status Text column you can see two status
    Transation Recorded and Transaction Executing
    Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
    execute the "Execute LUWs"
    OR
    Directly go to SM58 > Give * / user name or background  (Aleremote) user name and execute. It will show TRFCs to be executed
    for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
    EDIT ---> Execute LUW
    IDOCS Process Manually 
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/content.htm
    &messageID=2311994
    Thanks,
    JituK

  • Material Master Data Loading Error

    Hi All,
    I am loading master data for material. i got the following error.
    1. 0material_attr :
        Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not   valid
        Process :   If this message appears during a data load, maintain the attribute in
                         the PSA maintenance screens. If this message appears in the master data
                         maintenance screens, leave the transaction and call it again. This
    2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
       Process :  Same as above.
    I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
    Regards,
    Komik Shah

    Hi All,
    Thanks for the reply. i have solved most of errors. but there are some errors like this
    Diagnosis
        Data record 261 & with the key '000000000000132559 &' is invalid in
        value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
    System Response
        The system has recognized that the value mentioned above is invalid, and
        has processed this general error message. A subsequent message may give
        you more information on the error. This message refers to the same
        value, even though it does not state this explicitly.
    Procedure
        If this message appears during a data load, maintain the attribute in
        the PSA maintenance screens. If this message appears in the master data
        maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
    which string i should have to add in RSKC to remove this error ? i have already added  the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
    I have assigned points.
    Regards,
    Komik Shah

  • Data load error during updation of master data

    Dear all,
    While updating the master data from the PSA , the following error is appearing and the load fails.
    "The time interval ['20050313'/'20050313'] & (from/to) for the data
    records 1 & and 2 & overlaps in characteristic 0EQUIPMENT &."
    What could be the reason for this error and how to correct the same.
    I am able to understand that the valid from and the valid to date are same. in R/3 whenever a change record is created for the equipment the valid from and the valid to date will be the same as shown below.
    Creation of record (for example today) valid from         :- 02.06.2008 and valid to 31.12.9999.
    Change of record (for example tommorrow) Valid from :- 03.06.2008 and valid to 31.12.9999
    In the above case the valid to date of the creation data will automatically change from 31.12.9999 to 03.06.2008. 
    How could this be solved.
    Regards,
    M.M

    Hi Magesh,
    Please look at /BIC/*Equipment table in SE16.
    Find the record with a key = ********* and notice what values have Date_from and Date_to fields. The interval they determine, overlap with ur date_to and date_from.
    You need to supply correct date_to & date_from values.
    thanks
    Assign points if this helps
    Note:  this is a common scenario in time dependendent master data.....it happens because you have two records for the same values of master data and also they have overlapping time interval.....you cannot have two values of master data at the same time.

  • Data Load errors in Inventory

    Hello,
    I am trying to load 2LIS_03_BF data to the cube via PSA. The data is loading fine in to the PSA but while updating from PSA to the cube I am getting the following error message.
    An error occurred when reading PSA data
    I am getting the following short dump (ST22)
    CONVERSION_CODEPAGE_UNKNOWN     
    Hope will find a solution
    full points will be awarded
    thank you in anticipation

    Hi,
    For this type of requirements, itis better to upload the data to Z-cube from BF datasource. In that cube, you can take Movement Type characterstic , so that you can give reports on movement type wise.
    You can not include Movement type characterstic into Inventory(stock) cube.What I mean is you need a Cube purely gets the data from BF and this cube will not have any Stock Keyfigures.
    Or take a Z-KF into 0IC_C03(or you custom inventory cube) , But in update rule give a logic so that system fills the value if and only if movement type of the record is 321
    you can go with Z-KF on your cube.
    But in the mapping you have to give communication structure field either with filteration on other fileds or with out any if conditions .But you can not use infocube Kf as source for this new KF as you mentioned.
    use the movement type in IS and D/C indicator to filter the quantity like
    if comm_structure-movetype eq '321' and comm_structure-d/cindicator eq 's' then
    result = comm_structure-cpquab (this field is populating the stock quantity)
    so i think this code will bring all the issue of movement type 321 to my key figure
    Regards,
    Hareesh

  • Data loading error - processing terminated

    Hi Friends,
    I am trying to load data in Master-data getting the following error  when excuting the DTP.
    Error :-  Pocessing  Terminated 
    at the processssing Request . when I checked display message it shows  Message No :- RSBK223.
    No other error message is displayed.
    I am able to load data upto PSA means infopackage is running fine.
    Above error is coming when i am executing DTP to load DSO, MASTER DATA, MASTER DATA TEXT.
    Please suggest what to do ?
    Regards,
    RG

    HI,
    Transformation....PSA data all are correct.....
    i am taking data from a flat file.... created a simple master data Material ID and loading it....
    upto PSA i can see the values but when i am executing DTP it is failing with above mentioned error.
    Not getting any clue.....
    Please help...

  • 0MATERIAL master data loading error - version not valid

    Hi all,
    When i am trying to load 0material master data , i get the following error :
    0MATERIAL:Data record 1 ('000000000000100001 '): Version '000000000000100001 ' is not valid RSDMD 194
    System diagnosis :
    Data record 1 &  with key '000000000000100001 &' is invalid in value '000000000000100001 &'  of the attribute or characteristic 0material &.
    System response
    The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
    Procedure
    If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.
    Please help me solve this problem. Will assign points.
    Thanks & Regards,

    Hi Stefen,
    Thanks a lot for your input.. It has solved my problem as well.
    10 points from me
    Thanks a lot.
    Regards
    Dolly

Maybe you are looking for