PSE 10 will print from the organizer and in sharing mode, but not from full edit

I'm using pse10 on a computer with an i7 processor with 12GB of ram and windows 7 with a color laser printer. The print function works fine while in organizer and sharing mode, but not from full edit. When I try to print from full edit, I get an error message with a red "X" on it that says: "Before you can perform printer related tasks such as page setup or printing a document, you need to install a printer." I can't figure it out. The printer is in "ready" state, and works fine in the organizer mode, and in share. Any thoughts on what I'm missing? Thanks for any help in advance.

This occurs frequently with HP printers, though others are implicted as well from time to time
In Control panel>Devices and printers, right click your active printer, go to Printer Properties, and rename the printer to something short, e.g. my printer
http://kb2.adobe.com/cps/865/cpsid_86566.html

Similar Messages

I am trying to attach multiple photos to an email from my ipad 2. I can see how to do it from the camera and camera roll option,but not from the photos program. What am I missing? Thanx so much!

I am trying to attach multiple photos to an email using ipad 2. I can see how to do it using the camera and camera roll ap...
But not using the photos ap..which is where the photos are. Any help would be appreciated.!

In an album in Photos touch the Edit button and then touch the desired photos (up to 5). A blue check appears in each selected photo. Next touch the Share button at the upper left and select Mail. This starts a email with the photos attached.

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

I want to be able to erase the pictures out of my phone but not from the cloud

I want to be able to erase the pictures out of my phone but not from the cloud and I still want them to go into the cloud. How can I do that?
Thanks!

Are the pictures transferred to another device? Note the following quotation from http://support.apple.com/kb/ht4486
The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them.
If you are wanting a cloud storage option for photos you may want to investigate something like Flickr.

Hide from Exchange Address list works in EMC but not from ADUC

We are using Exchange 2010 Version 14.3 (Build 123.4) in a 2008 AD environment. When hiding users from the GAL we found when performing this task from AD Users and Computers the box is check and we verify that it is checked in EMC but the user remains
visible. This can be an active user or a disabled user. The results are the same. But when checking the box "Hide from Exchange address list" in the EMC the change is visible instantly. We can verify that both in the GAL and from OWA. It had worked
prior but now is no longer effective from ADUC even though the box is checked in the EMC. I can check the box in ADUC and verify in Power shell HiddenFromAddressListsEnabled : True yet the user is not hidden. I assume that ADUC is fully integrated with Exchange
but the changes are only effective from Exchange

There are 3 2008 DC. I can see the change instantly on the EMC and in Power Shell. When the changes are made via the EMC the changes are instant. When made from ADUC they never update. I think you hit the nail on the head with the versions. I have only been
here about 10 months and recently (2 months ago) fully decommission our 2003 Exchange which was hanging around for some time. Since I had experience I followed procedure and decommissioned the 2003 environment. Now as far ADUC my copy is Active Directory Users
and Computers Version: 6.1.7601.17514
I can assume from what I am reading that even though the check box and tabs for Exchange can be added, they do not function completely from ADUC? I just need to provide our Help Desk with a "best practices" They have been disabling and hiding users
via ADUC for years and claim it just stopped working.
So is it a correct statement that Exchange 2010 and above attributes can no longer be changed via ADUC?
~Steve

When I export a playlist and then open in excel, do whatever sorting I want, I then save the file and reimport into itunes but not all the songs are there. It appears to be from "comma's" in the song name. Any solutions?

I see songs such as "Monday, Monday" or "Paint It, Black" or even the artist name such as "Fireballs, with Jimmy Gilmer" which have comma's in them, being a problem when I try to do the following:
1. Export a playlist which contains songs which are all there and play fine, but some have comma's in the title such as listed above.
2. I then open that file in Excel and bring it in as a Tab-delimited file. Everything lays out fine, and all the songs are thing (including those with comma's).
3. I then sort the varoius fields I want (which I can't do in i-tunes because i-tunes won't sort it properly), and resave the file as a newly named file, which is also a .txt file.
4. I then import that playlist into my itunes. It is exactly the same songs that I just had exported but i-tunes says some of the songs can't be found.
I have traced this problem to comma's in the file name of the song such as listed above. There must be a solution to this either as the file is opened in excel or in how it's saved or some other solution short of having to rename song/artists without using comma's.
Thanks.

The additional problem is the file name of the song itself. Even if I were able to delete the commas or replace with a space for example, changing the file name would result in itunes not being able to find the file. I would have to go through each file (out of about 15,000+ songs) to find any that have titles such as described in this thread and change not only the song and artist in the fields, but changing the mp3 file itself.
I fear that I am really pretty much going to have to start with a list of songs that have no comma and then do a file compare to find those songs with commas and then just physically moving them into a new playlist I'm trying to create, but this is a royal pain as I want to be able to create a variety of playlists based on these chart dates/peak positions.
I'm trying to sort the songs in this manner: I use different fields in itunes so that I can put the "peak position" of each song based on Billboard charts, as well as the date the peak position was acheived. I use the "comment box" for that. I use the "grouping" field for my peak position.
So I end up with something like "10/14/1980" in the comment box as the peak position for a song which is in the grouping field, and so forth. If I try to sort the comments column in itunes for example, it won't sort properly. If I sort the Grouping field, it will bring up all the "1's", but that's followed by "10", 11, ...19, then "2", etc. This is why I want to export the playlist and sort it as I want, and then reimport the playlist into itunes.
What I'm ultimately trying to achieve is a year-by-year peak position playlist so that I end up with every #1 song (in this case) from, say, January 1st 1980 and then every #1 song in sequential order for the rest of the year falls in line. I have chart position dates from 1955 through 1999. I have entered in all the data from Billboard books I own so I can really create some amazing playlists, but these commas are problematic. Had I known this ahead of time I would have made "Monday, Monday" as "Monday Monday" and not included commas, but it's too late for that.
Any suggestions?

When I go to file then print - nothing happens. I can print from email (yahoo) and I can print from any other program on my computer but not from Firefox. Why?

I cannot get the print menu to work in Firefox. I have no trouble printing from anywhere else on my computer. I go to file and the click on either print or print preview and nothing happens - no window of even an error message appear.

Hi MollyPhloot07,
I'm glad you found the coupons.com app and you might also want to take a look at the GroceryIQ app from the same company. Please note that at this time, printing is only support from iPad to HP wireless inkjet printer. That's most likely the reason why your Canon isn't displaying when attempting to print. The other way to go might be emailing the coupons you want to your email address, then open that email and print from a conventional desktop or laptop computer.
Hope this helps!
Coupon Support

IPhoto library - Events - pics imported from camera, scanner and internet - it doesn't seem to matter - for a while they show OK but then when I go into the event and start scrolling some--but not all--pics disappear w/ ? small and expanded.

iPhoto Library - events - pics imported to library from camera, scanner and internet. Some disappear--sometimes when scrolling and other times on their own. Some disappear when in general event and some when I try to expand the picture. If when expanding the small pic remains. It's really annoying.

Are you running a "referenced" or "managed" library?
Give this a try:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

Late re newing my iOS Developer Programme membership. Consequenly my app has dissappeared from the store. Have just renewed but not sure if the app will reappear. Anyone else been in a the same silly situation as me?

I've made a silly error and not renewed my iOS Developer Membership.
Consequently my iPhone app has disappeared from the store.
I've just renewed my membership.
Will my iPhone app re-appear in the store?
Or will I have to re-submit.
Anyone else done anything equally stupid?
If so then any advice welcome.
Cheers

This is the user to user tech support forum. This is not the developer's forum, which is where you should be asking this question.

Can I turn off the drive mirroring from my MAC to the iCloud? Meaning I want to just use the iCLoud and a storage device but not have it take up space on my HD.

Basically I have 100megs left on my HD. I need to offload content. I need to move my files (photos) over to the cloud but I don't want it mirrored on my desktop taking up space.

That's correct, I moved the iMac drive to the second bay in the new Quad G5.
I wasn't sure if any combination of events would fix this. I didn't think there were any caches or anything else I needed to clear but just posted here to be sure.
The iMac was 10.4.3 and current with all updates. I didn't really think anything was missing but posted here to be sure. My understanding of Mac OS X is such that I was pretty sure that everything the Quad needed was already on the iMac drive. Not that this is necessarily any more reliable, but I asked at the Apple store and they said there was no problem with me moving the drive to the Quad and setting it as the startup volume.
A few people have told me that it's probably OK, but the official method is to use the migration assistant. So today I installed from the Power Mac OS X discs (10.4.2) to the Hitachi drive which I erased, then ran the migration assistant, then software update, then cloned the Hitachi drive back to the Seagate. I think the performace of the two drives is nearly identical (Seagate ST3300831AS, Hitachi HDS725050KLA360) and wanted the smaller (300 GB) Seagate drive to be my main drive.
I've been using Macs for only about a year and have found the experience interesting. On the plus side the performance is fairly consistant and I don't experience progressive system slowdown over a period of months. And of course there are the system update, viruses, etc. issues which are better. On the negative side basic stuff feels faster on a Windows system. I'll try Photoshop which I have no doubt will be faster on the Quad than the iMac and probably faster than a PC, too. But Safari or Firefox don't feel as fast as IE on a new Windows PC. Just my observation. I invested a lot in this Quad and expected to feel a significant speed boost even if it's only for launching applications and displaying web pages. (I have Comcast's highest speed Internet service.)

McAfee frequently warns me that Firefox is trying to accept incoming connections from the Internet and asks me whether or not I want to allow or block this - what is this all about?

I cannot find any reference to this sort of activity by Firefox on your website. It is an '.exe' program location and McAfee warns me that "Hackers can use programs to steal your personal information or hijack your PC".
Can you please confirm that these incoming connections are legitimate Firefox activity, and if so please explain what they are, why they are required by Firefox and why there appears to be no reference to this activity on your website. Many thanks.

Hi Cor-el,
Thanks for your response.
No, unfortunately McAfee does not give any more detail as to the origin of these incoming connections - is there a way to find out from McAfee?
I would have thought that Mozilla Firefox should have the answers, but I have been unable to find any reference to this issue on their website, Help section etc.
Could it be the way my Options are configured? - although I've not changed them from the Default settings as far as I can remember.
Cheers,
GWhatsitworth.

Have a form trying to edit. Has a bunch of check boxes but also text fields. I can move the fields and make them larger but I can't edit or move the text above the fields. Like it says "Enter comments Below" and then there is a text field for them to e

It looks like this:
A. What can be done to improve performance?
B. What can be done by assessor to help performance?
C. Comments?
Issue is the text field below these items is not big enough. When I make it bigger, like in "A" it gets bigger but then overlaps the text in "B" and I can't move the text. Someone else created this form and I have no idea what A, B and C are but they are not Text Fields. They are just static text of some sort and I can't do anything with it.

Hi,
Try making the subform that contains your fields flowed, this will allow them to not overlap, but you will probably have to add some margins (or some 'spacer' subforms) to get the appearance you had.
Regards
Bruce

Email @me and gmail work fine, but not from iPhoto

e-mail works fine, checked all connections, PWs etc., but not when sending photos from iPhoto; error message is :The email server didn't recognize your username/password combination. I've checked both in email accounts and reset both.

What are you settings in the iPhoto Preferences > General?
If you have set "Email photos using iPhoto", change this to "Email photos using Mail". This works more reliably.

My computer refuses to open i tunes, so i deleted it from the computer and re installed it but as before the computer will not open it

my computer refuses to open i tunes, so I delected the existing version and re installed the latest one but it will still not open

Can you check something for me please?
Restart your PC. after the PC restarts, bring up your Task manager, and go to the "Processes" tab. Click "Image name" to sort the processes alphabetically.
Now try to launch iTunes.
Does an itunes.exe process appear? If so, does it vanish after a second or so, or does it persist in the Processes tab (even though iTunes itself never shows up)?

PSE 10 will print from the organizer and in sharing mode, but not from full edit

Similar Messages

Maybe you are looking for