PSE 13 won't print to my Epson 845 Workforce printer. Help anyone?

I get an error message that the saved printer information is not compatible with this version of PSE or the saved printer is no longer available and that I should check printer settings before printing.

Suggest that you go to the Epson web site to be sure that you have the most recent drivers installed on you computer.
If that fails, contact Epson support.

Similar Messages

My computer recignizes my pixma 6000, but won't print, help

i have checked for drivers on the cannon wed site and was told there is no driver for my mac. the printer is recognized by the computer and is listed as hardware but won't print. Any suggestions ????

There is nothing you can do if there is no printer driver available.
You can check Gutenprint Supported Printers for a driver if they have one.

PSE 7 Won't print proper size

I have resized my picture to 9.7 X 7.7 inches to fit a particular frame. When I go to print I choose "Center" and I choose 8.5 X 11 paper size and "print preview". However, when I hit "Print" the preview window comes up showing my picture in the upper left part of the page and it prints out a a smaller size. What am I doing wrong?
[email protected]

Actually, Windows XP compatibility mode and C:\Program Files (x86)\ folder are independent of each other.
The x86 folder is where 32-bit programs get installed on Vista 64, regardless of whether they need XP compatibility mode. The PSE 7 installer will automatically place PSE in the x86 folder, since PSE is a 32-bit program.
There is no need to install PSE 7 on Vista 32 or Vista 64 by running the installer in XP compatibility mode -- that may well be contributing to your problems. PSE 5.0.2, 6, and 7 are fully Vista compatible.
Another person encountered very similar problems. He too then downloaded the free trial and had it run successfully. Then he installed from CD again, and the installer asked to uninstall the free trial; he said "yes" and the CD installation succeeded:
http://forums.adobe.com/message/2242533#2242533
If that doesn't succeed, I can recommend other troubleshooting steps.

Win Elements 7 won't print in landscape orientation

O.K. my PSE 5 will print in landscape orientation along the length of roll paper with an Epson Stylus 7600, but no matter what combinations I use with PSE 7, and making sure that at all stages the landscape icons/buttons are selected, PSE 7 won't print in anything else than portrait orientation and the image on the print page shows that, as does the print preview if I go to print. What is the issue here? I have tried deleting and reinstalling PSE 7 and also deleting the printer preferences at start up but this has no effect on the problem. I can edit in PSE 7, save the file, then reopen and print with PSE 5 with no problem, but that is not the point. I am using Win XP with 2G of ram and as pointed out, it works fine with PSE 5 with all my photo files.

Are you sure tht settings used re same in PSE5 & PSE7... Are you using Organizer or Editor for Printing?
+ Ripple (VJ)

Won't print black ink with new cartridge

I have read all advise. Black stopped printing. New genuine HP cartridges. Did partial and whole resets. Cleaned printhead. Removed all cartridges and case and cleaned well. Very gunky. Still won't print HELP ME! Have read thru all the posts and did everything

The post here may help resolve black not printing on your Offcieejt 6500, go through all the troubleshooting steps in the document referenced there and if that does not resolve the issue then try soaking the printhead.
If this does not resolve the issue you may need to replace the printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

IPhoto 7.1.4 won't print

Installed iPhoto 7.1.4, but now I can't print. Sez there are no themes available. But they are in the root library Application Support folder—and the app lives in the root application folder. Copied themes into ~/Library/Application Support/iPhoto just to see and it didn't help. Tried all the usual fixes: repair permissions, restarted app and OS, etc.
MacFixIt say tI'd find a Theme folder in ~/Library/Application Support/iPhoto and to copy it to /Library/Application Support/iPhoto. But I didn't have onenthere to begin with just in ~/Library/Application Support/iPhoto.
Reloaded 7.1.3 off another machine (on vacation and don't have disk) but now it still won't print.
Anyone have an thoughts?

Restoring iPhoto Themes
First look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation process described below:
1 - delete the current application.
2 - delete any files with iPhoto in the file name that reside in your HD/Library/Receipts folder.
3 - delete the Themes folder from your User/Library/Application Support/iPhoto folder. Also look in the HD/Library/Application Support/iPhoto folder for a Themes folder. If there is one there then delete it also.
5 - boot into the system disk that came with your computer and do a custom install selecting only iPhoto.
After installing reinstall the iPhoto 7.1.1 updater again followed by a repair of disk permissions with Disk Utility. Also make sure you're running the latest Quicktime, 7.3.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

I'm new to the Mac world. I installed my Epson printer on my IMAC and it worked fine. Then I installed Windows7 through Bootcamp and I think it reconfigured a port and now I get a communication error and it won't print. Any help on how do to fix this?

Sorry, I'm new to the Mac world. I recently got a new IMAC and installed my Epson CX5800F printer and it worked fine. Then a few weeks later I installed Windows7 through Bootcamp and I think it reconfigured a port or something and now I get a communication error and it won't print. Can anyone help me with this problem, and/or help me get the port back the way it was? Thanks, Barry

While looking through profile first aid, I came across this that might help explain my problem.
Searching for profiles...
Checking 20 profiles...
/Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/Standard.profiles/Contents/Re sources/Epson IJ Printer.icc
   Tag 'desc': Tag size is not correct.
   Tag 'dmdd': Tag size is not correct.
   Tag 'desc': Description tag has a bad Macintosh string.
   Tag 'dmdd': Description tag has a bad Macintosh string.
   The file is locked. Could not be fixed.
Repair done - 0 out of 1 profiles fixed.

I have a new Epson wireless printer connected and the iPad recognizes it but it won't print. What is AirPrint and how do I connect it?

I have a new Epson wireless printer connected and the iPad recognizes it but it still won't print. What is AirPrint & how do I connect to it?

Patti-
Is your Epson printer on Apple's list of AirPrint capable printers? See <http://support.apple.com/kb/ht4356>.
If it is an AirPrint printer, then your WiFi router may not correctly handle Bonjour data required by AirPrint. Contact the router's manufacturer to see if there is a change to its setup or a firmware update, that will make it work.
One other possibility is that there could be a print job stuck in the iPad's print queue. Double click the iPad's Home button and a row of recent Apps will appear along the bottom of the screen. Scroll across and see if the Print Center is there.
Fred

CS4 PS won't print to USB Epson 4900

It does, however, print happily to a USB Epson 2200 plugged into the same machine. All other apps on this Mountain Lion Mac Mini, including CS4 Illustrator, print fine to the 4900. I have tried both a USB and a network connection to the printer with the same result. There is *some* small output to the printer (just a flash on the print monitor), but no output results. Suggestions?

Hi TLL
Thanks for your reply! I guess I'd have to say no, it hasn't ever worked right, because this is a new installation on a new mac mini. PS worked fine to that printer on my old mac G5, but it has yet to work from the mini. Other info: PS on the G5 will even print to that printer as an "attached printer" on the mini! The only thing that won't print to the 4900 is PS running on the mini itself.
Drivers! Epson warned not to use the install disk that came with the printer for Mountain Lion, so I got them online (actually did it several times). That still seems the most likely problem, except that every other app on the mini, including Illustrator CS4 from the same cd as PS, prints fine.
I tried Colorbyte Imageprint, and it can print PS output to the printer, so all is not lost: all is just weird and/or expensive.
Thanks!
Jack

My epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
Credit for this solution to ASC user Yuengdog1983.

When i 'upgraded' to Mavericks, it locked me out and shut down my computer. now it won't print from my Epson Stylus CX3810. Epson doesn't have the driver to download and neither does the App store. Suggestions?

when i 'upgraded' to Mavericks, it locked me out and shut down my computer. now it won't print from my Epson Stylus CX3810. Epson doesn't have the driver to download and neither does the App store. Suggestions?

I'm having similar problems with my Epson Stylus DX5000. There was no in-built driver available (the generic old and new Stylus drivers didn't work), so downloaded the latest driver from Epson site. It shows as being available to print to, but just sends data to the print queue then job disappears.
I hope you're right C F McBlob, I could do with printing today but if there are new drivers available from November 5, then so be it.

Mac Mail won't print to Epson NX515

Mac Mail won't print to Epson NX515 - It worked fin until the last few days - contacted Epson and reinstalled drivers. Can print from Safari, Photoshop, Acrobat Pro, etc just not Mac Mail.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Epson Stylus S21 won't print on OS Mavericks

Hi,
I've been able to install my epson printer on my macbook but it won't print.
Every time I try to print, an error occurs and when I go looking for the fault, I find the following message:
"The function 'CGContextErase' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overaal degradation of system performance."
Is there any way to solve this?
Thanks

On this page: Support and Downloads - Epson Stylus S21 - Epson it looks like the last driver Epson had available for "OSX - Intel" was from 2009, so it would appear that there is no Mavericks-compatible driver for your printer.
You could try this, though:
uninstall all Epson apps/"utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
printers & scanners and it should see your printer and download a driver for it from Apple (if there is one)
If that doesn't work, try the Generic PCL printer setting in Printers & Scanners: OS X Mountain Lion: If the software for your printer can’t be found (the reference is for ML but it still applies to Mavericks)
if that doesn't work, see if there is a driver for your printer at Gutenprint for Mac OS X

Epson Workforce 30 printer won't print

I have installed all the latest updates, including an Apple Epson printer update, and the printer driver from Epson's website.
Still this thing won't print. All that happens is an error in the printer queue.
Anyone have any clues?

Some suggestions to try
Another USB cable
Turning off the Epson power for a minute and then back on again
Removing the print queue and adding it again
Resetting the printing system
Note that when you reset the printing system the printers in Print & Fax are deleted, but not their printer drivers. So you don't need to run the printer driver installers again, you just need to add the print queues again. For a USB connected printer, this can be done by simply unplugging the USB cable and plugging it back into the Mac agian.
How to Reset the Printing System
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac

Epson EPL-5700i won't print

Just upgraded to an iMac from a G4. I've been troubleshooting w/Epson support and I've already
reset printers
reinstalled driver from OSX install disc
deleted any older Epson preferences, drivers, documents
switched cables
turned printer on/off
Every once in a while the printer will print one page.
First with an error message - paper size differs from paper tray and would I like to Cancel or Continue Printing and then, after it prints, an error comes up saying A Service Call Error Occurred, and then it won't print anymore. Printer worked just fine w/the G4.
Any suggestions?

Do you get an error message?
What happens when you try to print?
Is is set as the default printer? Check in control panel>devices and printers.
Does it fail to print from all applications?
We need more information from you.

PSE 13 won't print to my Epson 845 Workforce printer. Help anyone?

Similar Messages

Maybe you are looking for