PSE 6 - problem with photos disappearing from Slideshow

Hello,
I worked on a slide show recently and then exported it to a .wma file. I returned to the slide show project in Elements a couple of days later to add another slide. Out of the 27 slides only three were intact. In 25 slides, there were no longer any pictures, but the captions were intact. The other one that was intact was a slide with just a caption. Also the timestamp on the slide show project was 2/12/2009 at 10.37 but I saved changes on 2/14 and those were saved (like the slide with just the caption I mentioned above) I don't know what happened or how I can get back to where it was before.
Thanks for the help!

> When I installed Adobe Lightroom, I was asked if I wanted to create a separate catalog for Lightroom or merge with the one from Photoshop elements. I chose the separate catalog for Lightroom and all the photos in the Photoshop elements organizer got wiped out (including a previous slideshow I had made)
I dont think that would normally occur, so something screwy was going on with your installation. Lightroom can import a PSE catalog, but it should never overwrite it. But Im not a Lightroom expert perhaps someone else more knowledgeable can help on that.
> I read other people having issues with catalog when upgrading to PSE7. So would that also be a case where you can lose the catalog(and the slideshow along with it)when you upgrade?
There are many potential problems that occur when you upgrade from PSE 6 to PSE 7. Of the ones that have been posted here, most people who have stuck it out get the problems fixed eventually, though I think many people give up in frustration before then.

Similar Messages

  • Problem with images disappearing from project

    I have inserted a number of images into my Robohelp 9 project topics using the Insert >> Image function.  Typically the images were stored on my hard drive on my pc, but some I pulled from a shared network drive that were prepared by other people.  They seemed to load into the project OK.  I had them grouped in a about 5 different robohelp folders to keep them organized so after I would insert, complete my topic and save.  I would move the images to their respective folder.  This was fine for a while,  I had no problems generating printed .pdf documentation, making changes to my topics, etc.  But now the images keep disappearing from the Robohelp folder structure and the printed documentation.  I can see the images when I open up and view the topics.  I can also see them when I look out onto the drive on the computer.  However, they do not show up in the Robohelp  Project Manager and are not included in my printed output.  I keep re-inserting them, but they continue to disappear. 

    Hi there
    Certainly it won't hurt anything to add the images to baggage files, but I'd be shocked to find that solves the problem.
    If an image has been used in RoboHelp, it should be present in the project. End of story. The fact they seem to be disappearing seems to suggest that maybe something has gone awry with folder naming or image naming or the project in general.
    So what version and flavor of RoboHelp are you using?
    RoboHelp 10, RoboHelp 9, RoboHelp 8, etc.
    RoboHelp HTML, RoboHelp for Word
    Cheers... Rick

  • TS3899 I have a problem with emails disappearing from my iphone. These are emails that I have put into folders to keep. When I go back to get them they are gone. Need help please.

    I have had issues with my iphone deleting emails without my consent. It seems as if it doesn't want to hold onto emails for an extended amount of time. I use my iphone for all work related emails and personal. I have created folders to store important emails in related to work. I found when I need to retrieve those emails, they simply are not there. I was told to delete the email account from my iphone, then to add it back into phone. I have done this and things seem fine, then after a few days it no longer works. I have researched this topic and see that I am not the only one with this problem. From what I can find no one seems to have the answer. Please help?

    Settings > Mail, Contacts, Calendars > Tap email account in question > nMail days to sync > extend the time

  • Problem with photo import from iPhone

    I'm trying to import photos from an iPhone and get "the file is in an unrecognized format."  What do I do?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Problems with photo import from iphone 4 with ios5 to pc

    Help, when I try to import my pix using windows it will only import my first 77 pix which are already on my computer from past imports.  The other 100 pix on my iphone do not import or even attempt.  When the window comes up to import I click yes and it says importing 77 pix??? Why will it not import the other pix. I've recently updated my software to ios 5.0.1 but I'm not sure when I did this vs. the last imported pix. I have icloud but I clicked no on syncing pix to icould just because of all the space it would require.  Any ideas???

    More info: I can manually copy the pix from my iphone in the pc then paste to my folders in the pc??? I'm using Windows 7 home edition. And the 77 number is not the start/ending point of old pix new pix during software update.

  • After iPhoto quit unexpectedly, the last 5 months of photos disappeared from my library. Please help!

    After iPhoto quit unexpectedly, the last 5 months of photos disappeared from my library. Please help! I can't find them anywhere.

    You're using iPhoto 6?
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • Problem with remove task from schedule in PWA

    In our environment problem with remove task from schedule by PWA.
    Problem is only when I want to remove few task in the same time, but the operation one by one is correct.
    In my opinion problem is with calculation schedule after remove tasks, column ID include wrong value it means that Number ID does not generate in the correct order same of numer
    disappear. Click Calculate button on ribbon causes problem with finshed operation and save project.
    Problem occurs only machine with IE 11.0 browser without compability mode, on other machine for example on the same project with IE 8,9,10 everything is correct.
    Problem appeared recently, earlier everything was OK.
    Txn, Dariusz Moczyński

    Hi Darius,
    I'm a bit confused. You are now talking about 2 issues.
    For the first one, you cannot edit anymore tasks in PWA, with any browser versions? Is it happenonog for any users on any projects? Try the following solutions publish the project from Project Pro and see if it helps. Press CTRL F5 to delete IE cache. Ensure
    that your PWA URL is added to the trusted site and/or compatibility sites. Check for the ULS logs or javascript errors.
    For the second issue, please refer to my previous reply, this obviously cannot be considered as a bug since it is happening with a non supported browser version and working properly on supported versions of IE.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Problems with 'Order Prints' from Aperture 2.1.3 Mystery borders

    *Some background:*
    I've been using Aperture for about 3 months now, importing most of my iPhoto library into the program. I have only recently started shooting in RAW format, most of my photos image files are in JPG format. In the past, I've had no problems with obtaining prints from within iPhoto or to a limited extent Aperture. So, far as I know my program is up-to-date. I have 2 plugins installed: Aperture2twitter and *flickr export Lite* both of which work acceptably.
    *The problem:* I ordered 317 4×6 prints from my aperture library.
    Every photo has a 1/4″ border on both sides of the image, i.e. the printed image is only 4×5 1/2″. I have never ordered this quantity before, but I don’t believe that was the problem, it appears that the processing machine was misaligned and no one reviewed the prints prior to shipping.
    I tried again, on 4 different images ... all JPG files with 3 out of 4 were OK, but one exhibited the "border" issue.
    I haven't a clue what is going on here. Apple implied +(via email)+ that I would have to individually crop every photo to ensure proper aspect ratio. This makes no sense to me at all, as I have never had this kinda problem before.
    Could the plugin(s) be interfering with the s/w? Is there a trick to having photos printed from within Aperture that was not present in iPhoto?
    Any thoughts on what the problem is would be greatly appreciated.
    Thanks
    -john

    I believe that I've solved this problem, with the help of the folks at Apple who handle Aperture tech support using the Aperture support ID that came with the product.
    So the short answer is: Aperture print services REALLY DO REQUIRE the image to be cropped (constrained as they say) prior to the data being sent to Apple Print services.
    Here is the link that describes cropping http://support.apple.com/kb/HT1993?viewlocale=en_US
    The process as described is cumbersome, but the support tech pointed out that in Aperture, crops are 'non-destrutive' and can be undone simply by removing the check mark on the Adjustments tab of the image you crop. *This means that you do not have to make a duplicate image for cropping.*
    So, here is the process that I arrived at to ensure that my "order prints" job turned out:
    1. create an album of all the photos you want to submit for printing.
    2. for each image call up the Crop HUD by pressing 'c' on the keyboard.
    3.select the aspect ratio that you want for your photo. Make sure that it does NOT SAY Master Aspect Ratio, or Main Display Aspect Ratio.
    4. Crop the photo
    on the adjustments tab you can see the X and Y data and Height / Width information which can be undone.
    5. Submit your print request to Apple for all the cropped photos.
    When the prints arrive, you can compare the prints with the submitted photos. They should all be good. You can then delete the album (since it really is not a physical thing) or keep it for reference.
    It all seemed a bit arcane to me, as I never had to worry about this in iPhoto. It must be that iPhoto sends different data than Aperture. I have just received 200 + prints back from Apple Print Services with about 98% success rate. I just have to adjust my thinking and my process when dealing with Aperture.

  • ReImport Failure after Photos Disappear from Catalog in 2.1

    Mac OS (Tiger). Lightroom 2.1. Several photos disappeared from my catalog. They are visible in Bridge. I tried to do an import from disk to get them back by selecting the missing picture in the import dialog and then clicking import. After clicking import I get a message that the file won't be imported because it is already in the catalog (even though it is not visible). If I then select the name of the file in the "will not be imported list" and click on the "show in library" button I am taken to a picture other than the one I selected for import.
    I have been able to re-import the images by renaming them outside Lightrom, and doing an import from disk. Once the images are inside lightroom I can rename them to their original name. At that point I get a message saying that the file can't be renamed, and Lightroom then proceeds to rename the file to its original name.
    This is making me very nervous about the integrity of the catalog in 2.1. I don't know if this is a 2.1 problem or a 2.0 problem because I noticed the missing images weeks after I upgraded from 2.0 to 2.1.
    So far I have noticed only two images that can't be seen in the library module and can't be reimported (unless they are renamed outside Lightroom).
    Any suggestions?

    I have disabled Library filters and the problem persists. Also, I have seen the same problem on two different computers under both Tiger and Leopard, Apparently, the disappearing images only disappear AFTER an editt and same in Photoshop.

  • Iphoto 8.1.2 crashed while deleting  photos (7,000) from my iphone and the photos disappeared from iphone and iphoto

    First i imported my photos to iphoto 8.1.2 when it finished, asked me if i want to "delete them from the camara"  i clicked yes and crashed while deleting  photos (7,000) from my iphone and the photos disappeared from iphone and iphoto

    No early version of iPhoto can open a Library from a later version.
    You can try revert the Library with iPhoto Library Manager
    http://www.fatcatsoftware.com/iplm/Help/downgrading%20a%20library%20to%20an%20ea rlier%20version%20of%20iphoto.html

  • Photos disappeared from a Smugmug gallery collection

    I recently had the photos disappear from a LR 3.4.1 Smugmug gallery collection.  They didn't disappear from Smugmug, just from this one LR Smugmug gallery collection.  And they didn't disappear from their LR folder.  It's a relatively small gallery (21 pictures) and I can just put them back, but I'd like to understand what might have happened to cause this.
    Chuck

    Ditto -
    EXACT same thing happened with Facebook...
    Looks like folks JUMPED On helpin ya!

  • My photos disappeared from the cloud and from my iPad

    All of a sudden a chunk of photos disappeared from my iPad, which is synchronized with iCloud.

    First drag the ? off the dock about 2 inches and let go. It should diappear with a poof.
    Next, double click the hard drive icon and open the Applications folder. Is iTunes there?
    If not, you will have to reinstall it. Do you have a backup?
    If you do find iTunes in the Applications folder, click on it once and drag it to the Dock where the ? used to be.

  • Face time fades out and then tries to reconnect on new ipad retina display on WiFi.  Iphone 4s has no problem with face time from exact same location and same contact.  WiFi signal strong on both devices.  What gives?

    Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact.  What gives?

    rdallas001 wrote:
    Is the router to small?
    Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
    Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

  • Problem with date format from Oracle DB

    Hi,
    I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
    I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
    I have changing the field settings in DataSource  to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
    I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
    If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
    Thanks in advance.
    Regards
    Varada

    Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
    The issue again in detail
    I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
    The problem is,  I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
    I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
    I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
    Regards
    Varada

Maybe you are looking for