PSE 7 Share problems

I cannot get PSE 7 to send either email attachments or Photo-mail properly.
When I attempt either of these I get all the way through the process, but when Elements opens my email software (Outlook Express) which is the default email in Elements I get a screen that looks like I am reading an already sent email, Sender unknown, all the Adobe advertising is there and the attached photos appear normal. There seems to be the ability to reply or reply all as if I had received it. It is NOT in my in basket or sent mail basket.
HOWEVER, there is no way to send the blasted thing to the receipent selected in my contacts.
This same result occurs with Photo Mail.
I had no such problems with PSE 6.
Is there a solution??
Thanks

I guess I solved my own problem. I re-installed Microsoft Outlook which I had used until a couple of months ago. I thought it was "overkill" so I went to Outlook Express and un-installed Outlook. After a re-boot I can now send email attachments etc. normally. Apparently something got confused in the process even though I changed the default email client in both PSE7 and the computer in general.
Computers................!!!!!!!!!!!!!!!?????????

Similar Messages

PSE 6 Problems Fixed in PSE 7

Over the past year, Ive kept a list of PSE 6 problems Ive encountered and verified:
http://www.adobeforums.com/webx/.59b65e1b/0
Ive tested those problems in PSE 7 on my computer, and the results appear below.
PSE 6 problems that appear to have been fixed in PSE 7 are marked [F], and problems that arent fixed are marked [NF]. Because of limitations of the forum, this list is split across several messages.
Overview
The good news is that Adobe has fixed many of the most serious problems with PSE 6:
- The missing Help content.
- The inability to use raw files on a newer computer.
- The Move command that deleted files.
- The low-contrast grey-on-black user interface.
In addition, the PSE 7 Organizer seems significantly zippier for scrolling and searching (with my 13K catalog and someone elses 68K catalog).
The not-so-good news is that a fair number of serious problems and a large number of minor ones remain unfixed:
- The Organizer still gets horribly confused by reassignment of drive letters and drives with duplicate serial numbers, situations that occur when people upgrade their computers.
- Numerous problems with searching, including the broken timeline and exclude keyword category.
- Folder Location view still shows incorrect folder contents.
- Map view remains a buggy toy that cant handle more than several hundred photos.
- Date/times set by Adjust Date and Time can still be lost silently.
- High-resolution displays with DPIs larger than 96 arent supported.
- The Organizer shows incorrect colors for Adobe RGB photos.
There are 65 issues listed here, 37 of which are major, causing data loss or seriously impeding functionality with no easy, obvious workaround. Of the 37 major issues, 13 have been fixed. Of the 28 minor issues, 8 have been fixed.
Ive reported all of these problems to Adobe. Almost all of them are in the Organizer. Based on all the reports on the forums, it appears that the PSE 6 Editor has far fewer problems the Organizer. Perhaps thats because the Editor shares the same code with the professional Photoshop, while the Organizer appears to be an orphaned consumer product whose development Adobe has moved offshore.
For reference, my computer is a midrange laptop with a dual-core 1.8 GHz processor, 3 GB of memory, and a 7200 RPM disk (the same speed as desktop disks).
Raw Files
Major Problems
[F] On a multiprocessor, the Organizer behaves erratically with catalogs containing raw files: sometimes it crashes, sometimes it shows the hourglass icon for raw files, sometimes it shows the broken-image icon.
[F] In a catalog with large numbers of raw files, scrolling quickly over dozens or hundreds of large-sized thumbnails will consume 100% CPU for a minute or longer.

Part II
File Management and Tagging
Major Problems
[F] The File > Move command will silently and permanently lose a file if the destination folder has a file of the same name as the file being moved; this is different behavior than PSE 5.
[F] The File > Move command loses the association between the photo and the audio caption, even though it moves both files to the new location.
[F] If you move or rename a catalog using File > Catalog > Move/Rename, you can no longer edit existing slideshows in the catalog.
[F] Tag hierarchies with more than 500 or so tags make the Keywords pane unusably slow (but worked fine in PSE 5).
[F] The Photo Downloader process APDProxy.exe crashes at startup because of a missing DLL.
]This problem doesnt occur in my PSE 7. But it was clearly a timing-dependent bug (a race condition) that came and went for me and many others, so it may be still lurking. Adobe has a tech note that says it occurs with PSE 7, but the tech note gives symptoms and a workaround that only apply to PSE 6, suggesting a cut-and-paste error by a PSE 7 support person.
[NF] The Organizer fails very ungracefully when two drives have the same volume serial number, e.g. because of the use of a disk-cloning utility.
]Im very disappointed that Adobe didnt add the three lines of code that would have issued a warning when it discovered two drives with the same number. While most people will never encounter this, when it strikes someone, its symptoms are very mysterious. Adobes tech note on the issue gives incorrect and misleading information about possible solutions.
[NF] The Reconnect command fails to reconnect when: you move your photos to a new drive, assign the drive the letter of the old drive to the new one, and leave both drives connected to your computer.
[NF] If a hard drive containing photos in the catalog gets its drive letter reassigned by Windows, then the left-hand folder pane of Display > Folder Location view shows the old drive letter, not the new one, as containing the photos.
]This sounds innocuous, but it led a user on the forums to select the wrong drive when dragging and dropping a folder, permanently deleting some files. This bug and the previous one with Reconnect have the same underlying cause the Organizer doesnt update drive letters in its catalog.
[NF] Folder Location view shows incorrect folder contents when more than one keyword tag is selected in the Keyword Tags pane.
]Based on reports on the forums, there appear to be other situations where Folder Location view shows incorrect folder contents, but they havent been easy to reproduce.
Minor Problems
[F] The File > Rename command no longer includes leading zeroes, causing the renamed files to sort incorrectly in Windows Explorer.
[F] Display > Import Batch shows the wrong time for batches imported by the Photo Downloader; if the local time zone is UTC-8:00, then the time will be 8 hours earlier.
[F] The Organizer doesnt unlock an edited file saved to a folder whose name contains an apostrophe.
[NF] In File > Export, the Common Basename can no longer be empty, and a hyphen is added automatically, so you can no longer get files named 1.jpg, 2.jpg, etc.
]You can get files named 1.jpg, 2.jpg, etc. but you cant get files named p1.jpg, p2.jpg, etc. a hyphen is still added in that case.
[NF] Setting the Apply Metadata > Author or Copyright fields or the option Preserve Current Filename In XMP of the advanced options of the Photo Downloader causes duplicate files to be downloaded and imported.
Map View
Major Problems
[NF] Map view is unusably slow with more than about 6-8,000 mapped photos.
]When I tested PSE 7 by importing 12,000 photos (the size of my catalog) that had GPS locations, the red push-pins didnt blink uncontrollably as they did in PSE 6. But the Organizer crashed a number of times when I tried to zoom and pan the Map view until I was able to scroll the map to another country and then back again. The CPU continued to consume 80% of a single CPU (40% of two), even 10 minutes after I closed Map view. When I selected Limit Search to Map Area, PSE took over a minute to respond.
[NF] It takes 5 seconds to assign a keyword tag to a photo if there are 1,000 or more photos with map locations.
]In PSE 7, it takes 3 seconds with 1,000 photos, 12 seconds with 8,000 photos, and 18 seconds with 12,000 photos.
[NF] Giving a map location to a tag assigned to hundreds of photos makes both the Keywords pane and the Map view unusably slow.
]Giving a map location to a tag assigned to 2000 photos makes assigning any keyword tag to a photo very slow (see above). Searching on keyword tags takes 15 seconds, and a Show All takes 15 seconds.
[NF] Removing the map push-pin of a tag assigned to hundreds of photos mistakenly tries to update the metadata of each photo, which can take tens of minutes and fill up your recycle bin.
]The weird thing is that assigning a map location to the tag doesnt try to write the metadata of files with that tag.
[NF] Moving map locations always fails, silently (too bad if you want to record backcountry locations not namable via a place name).
[NF] If a photo with GPS coordinates is imported, it doesnt show as a red push-pin on the map.
]Scrolling the map or restarting the Organizer causes the pin to appear.

PSE 8 problems to start the program

Hello!
Just download the PSE8 today and I can´t get it launched? The edit-program start but the organixer doesn´t. Either I can´t launched the share-programs or the program to make albums.
Someone out there who can help me?
SE-MJA

Hello!
I got the same result.
The program can´t launch the "read in workspace for Elements Oganizer". It´s try to launch but be freeze and then nothing happens.
It´s bad because I think the program was good. Now I think I will reclaime the produvt and get my money back.
Regards!
Micke
Date: Wed, 7 Apr 2010 04:22:09 -0600
From: [email protected]
To: [email protected]
Subject: PSE 8 problems to start the program
Have you located the program file to ensure it is properly installed?.
If not, click on the start button and type PhotoshopElementsEditor.exe (note caps and no spaces) into the search box.
The program, if available, should appear with a blue PSE icon in the search results.
Right click on it and select send to desktop.
Then try to open the editor from the desktop by clicking on the icon.
>

PSE 7 Problems Fixed in PSE 8

Since PSE 6 was released, I’ve tracked all the reproducible bugs I’ve encountered and reported to Adobe. I’ve tested these problems in PSE 8 and listed the results below – problems that appear to have been fixed in PSE 8 are marked [F], and problems that remain unfixed are marked [U].
Overview
There’s good and bad news. Adobe has fixed a number of serious bugs in the Organizer, but it has left most unfixed, even though they’ve been present since at least version 6. Even worse, the two major features introduced in the PSE 8 Organizer, face tagging and the keyword-tags text box, have show-stopper problems. And even worse yet, Full Screen view is now painfully slow with large catalogs.
The most important fixes address serious problems with PSE’s handling of drives that were introduced in version 6. PSE now notices when a drive’s letter has changed, a problem that has bedeviled many users upgrading or rearranging their drives. Also, PSE now ignores the case of UNC pathnames (network drives), no longer creating duplicate volumes for the same network drive. Unfortunately, one serious bug remains: PSE still gets horribly confused when there are two drives with the same volume serial number, and it still doesn’t even issue a warning.
But many long-standing problem areas remain: The Map View is an unusable toy. The handling of metadata is riddled with bugs. Folder Location view shows the wrong contents of folders. Searching has numerous bugs making it clumsy and confusing.
Overall, of all the bugs I’ve reported, PSE 8 fixes 8 of 46 major ones and 8 of 28 minor ones:
Major
Minor
Fixed
Unfixed
Fixed
Unfixed
File Management and Tagging
4
6
2
Integration with Photoshop.com
2
5
Map View
6
Color Management
1
Metadata
10
2
3
Searching
8
5
User Interface
1
1
5
9
Slide Shows
1
1
Editor
1
1
Total
8
38
8
20
I’ve reported all of these problems to Adobe. Almost all of them are in the Organizer. Based on all the reports on the forums, it appears that the Editor has far fewer problems than the Organizer.   Perhaps that’s because the Editor shares the same code with the professional Photoshop, while the Organizer appears to be an orphaned consumer product whose development Adobe has moved offshore.
For reference, my computer is a midrange Vista laptop with a dual-core 1.9 GHz processor, 4 GB of memory, and a 7200 RPM disk (the same speed as desktop disks).
New Problems in PSE 8
[U] PSE 8 crashes or gets intolerably slow after using the new Keyword Tags text box a small number of times.
On my 4 GB Vista 32 system, PSE crashes after tagging 41 photos.
[U] If you use the new Keyword Tags text box to apply an existing tag name with a comma in it, PSE will silently create two new tags instead.
Apply the existing tag “San Francisco, CA” will create two new tags, “San Francisco” and “CA”.
[U] After applying a tag, the Keyword Tags text box loses keyboard focus and you need to mouse-click in the box again to enter another tag.
Forcing the use of the mouse defeats the purpose of the Keyword Tags text box, which is to make tagging much faster.
[U] The Find > Find People For Tagging command locks up the Organizer for about 30 seconds after you click Done (even if you haven’t made any changes), when using larger catalogs.
On a catalog with 10,000 thumbnails showing, the cursor spins for 30 seconds after clicking done. But you can work around this by doing a tag search or setting a date range to have only a small number of thumbnails showing before you invoke the command.
[U] In the Find > Find People For Tagging command, when you select Add Missing Person, you usually can’t resize the selection box by grabbing the lower-right or lower-center handles, which are the handles that most right-handed people are likely to use.
If you move the mouse very quickly so that it is over the photo before the selection box appears, you can usually resize the box with those handles. But you have to be very quick.
[U] The Find > Find People For Tagging command doesn’t do auto-complete on pre-existing People tags, making it very hard to use with existing catalogs.
I have over two hundred People tags in my catalog. Because the command doesn’t auto-complete on pre-exisiting People tags and will silently create new tags, and because I don’t remember exact spellings (that’s the point of auto-complete!), I found myself creating duplicate tags (e.g. “John Ellis” instead of “John R. Ellis”, “Bob Smith” instead of “Robert Smith”). It’s painful to clean up such a mess.
[U] Full Screen view (F11) is much slower than in PSE 7 on larger catalogs.
With a 14,000-file catalog and all thumbnails visible, PSE 7 takes 6 seconds to invoke F11, while PSE 8 takes 13 seconds.   With just 20 thumbnails visible (e.g. when working on the most recent import batch), PSE 7 takes 1 second, while PSE 8 takes 7 seconds. This makes selecting the good and weeding out the bad significantly slower.
[U] PSE doesn’t remember the settings if you toggle the Full-Screen Quick Edit Panel and Quick Organize Panel to disappear completely.
On 4:3 displays, it’s desirable to hide the panels completely in full-screen view, so you see the entire image without the panels overlapping them (that’s the point of full-screen view, no?). But PSE forgets the toggle settings, even in the same session.
[U] The keyword tagging in the Quick Organize Panel doesn’t auto-complete tags you type, making it useless with more than a dozen or so tags.
It’s worse than useless, since it will silently create a new tag if you mistype the name of an existing one. And the “tag cloud” is a silly toy that doesn’t help with hundreds of tags.
File Management and Tagging
Major Problems
[F] After reconnecting a file on a network drive, PSE will let you import the file a second time, failing to recognize it as a duplicate. The catalog is left in an inconsistent state, with two entries in the volume table for the network drive, one upper case and one lower case.
[F] The Reconnect command fails to reconnect when: you move your photos to a new drive, assign the drive the letter of the old drive to the new one, and leave both drives connected to your computer.
[F] If a hard drive containing photos in the catalog gets its drive letter reassigned by Windows, then the left-hand folder pane of Display > Folder Location view shows the old drive letter, not the new one, as containing the photos.
This sounds innocuous, but it led a user on the forums to select the wrong drive when dragging and dropping a folder, permanently deleting some files. This bug and the previous one with Reconnect had the same underlying cause – the Organizer didn’t update drive letters in its catalog. Fixed in PSE 8.
[F] The Restore Catalog command puts the wrong path into the restored catalog for folders whose name starts with the catalog name, and it will mark files in those folders as missing. For example if the catalog is named “houses”, and a folder containing photos in the catalog is named “houses photos”, files in the restored catalog will have the path “houses\ photos\” instead of “houses photos\”.
[U] Folder Location view shows incorrect folder contents when more than one keyword tag is selected in the Keyword Tags pane.
Based on reports on the forums, there appear to be other situations where Folder Location view shows incorrect folder contents, but they haven’t been easy to reproduce.
[U] The Organizer fails very ungracefully when two drives have the same volume serial number, e.g. because of the use of a disk-cloning utility.
I remain mystified that Adobe didn’t add the three lines of code that would have issued a warning when it discovered two drives with the same number. While most people will never encounter this, when it strikes someone, its symptoms are very mysterious (and a lot of people using cloning utilities).
[U] The conversion of a catalog from PSE 6 to PSE 8 doesn’t properly handle photos that are stored within the PSE 6 catalog folder (as occurs when PSE 6 was used to restore a catalog from a backup). As a result, it isn’t possible to save photos in version sets, and PSE 8 will create duplicate thumbnails in the Organizer for an edited file.
[U] File > Backup/Restore Catalog doesn’t backup and restore audio in slide shows.
[U] Using Folder Location view to move a folder containing hidden files imported in the catalog will silently fail to move the hidden files and will leave the unhidden files disconnected in the catalog.
[U] When converting a previous-version catalog whose photos are stored inside the catalog folder, as occurs when you’ve previously used File > Restore Catalog with New Location, PSE 8 needlessly copies all those photos. If you have a very large catalog, this will waste huge amounts of disk space; and if there isn’t enough disk space to do the copy, the conversion will fail instantly with a generic non-explanatory error message.
Minor Problems
[U] In File > Export, the Common Basename can no longer be empty, and a hyphen is added automatically, so you can no longer get files named 1.jpg, 2.jpg, etc.
You can get files named 1.jpg, 2.jpg, etc. but you can’t get files named p1.jpg, p2.jpg, etc. – a hyphen is still added in that case.
[U] Setting the Apply Metadata > Author or Copyright fields or the option Preserve Current Filename In XMP of the advanced options of the Photo Downloader causes duplicate files to be downloaded and imported.
Integration with Photoshop.com
Major problems
[F] Adding a photo to a second synced album will cause Photoshop.com to lose any changes you’ve made with PSE’s Edit > Adjust Date And Time.
[F] If you you rename a file that’s synced with Photoshop.com, Photoshop.com doesn’t pick up the new name (important if you’re using Photoshop.com as a backup service).
[U] Photoshop.com shows an incorrect date/time taken for photos with unknown month, day, or time.
The date/time shows as the the first month/day/minute/second in that time period in UTC that then gets converted to local time; e.g. “7/2/2005” gets shown as “7/1/2005 5:00 PM” for a user in PDT.
[U] Photoshop.com doesn’t obey the EXIF Orientation metadata field and can show photos rotated incorrectly, e.g. if they were rotated with the PSE option Edit > Preferences > Files > Rotate JPEGs/TIFFs Using Orientation Metadata.
[U] Changes to the order of photos in a PSE album aren’t synced to Photoshop.com, and vice versa.
[U] Only the top photo in a version set is synced with Photoshop.com (so you can’t rely on Photoshop.com to backup version sets).
[U] When a stack is synced with Photoshop.com, all the photos in the stack are synced, but the fact that they were in a stack is lost (so you can’t rely on Photoshop.com to backup stacks).
Map View
Major Problems
[U] It takes 4 seconds to assign a keyword tag to a photo if there are 2,000 or more photos with map locations.
It takes 2 seconds with 1,000 photos, 6 seconds with 4000 photos, and 11 seconds with 8,000 photos, and 21 seconds with 12,000 photos.
[U] Map view is unusably slow with more than 8 - 10,000 mapped photos.
When I imported 12,000 photos (the size of my catalog) that had GPS locations, the Organizer crashed a number of times when I tried to zoom and pan the Map view.   When I selected Limit Search to Map Area, PSE took over a minute to respond.
[U] Giving a map location to a tag assigned to hundreds of photos makes both the Keywords pane and the Map view unusably slow.
Giving a map location to a tag assigned to 1700 photos makes assigning any keyword tag to a photo very slow, 12 seconds.    Searching on keyword tags and Show All each take 13 seconds.
[U] Removing the map push-pin of a tag assigned to hundreds of photos mistakenly tries to update the metadata of each photo, which can take tens of minutes and fill up your recycle bin.
The weird thing is that assigning a map location to the tag doesn’t try to write the metadata of files with that tag.
[U] Moving map locations always fails, silently (too bad if you want to record backcountry locations not namable via a place name).
[U] If a photo with GPS coordinates is imported, it doesn’t show as a red push-pin on the map.
Scrolling the map or restarting the Organizer causes the pin to appear.
Color Management
Major Problems
[U] The Organizer considers photos produced by cameras set to the color space Adobe RGB as untagged with a color profile, showing their colors incorrectly.
Metadata
Major Problems
[U] The File > Write Keyword Tag command doesn’t create or update .XMP sidecars for Nikon D300 or D80 .NEF raw files (but it does for Canon CR2 raw files).
The PSE 8 Write Keyword Tag command now gives a warning when you try to invoke it on a D300 .NEF raw file. Why PSE can write sidecars for Canon but not Nikon raw files is a mystery – it’s no harder to handle one than the other.
[U] File > Write Keyword Tags and Properties fails to write the map location (GPS coordinates) of TIFFs (tested with TIFFs produced by the PSE Editor and the Nikon Coolscan V, Nikon Coolscan 5000, and Epson 4490 scanners).
[U] File > Write Keyword Tags doesn’t write the map location (GPS coordinates) into the .xmp sidecar files of Nikon D80 or Canon G9 raw photos.
[U] The Organizer ignores correctly formatted EXIF GPS locations in some files that many other programs can read without trouble; this may be because the EXIF is encoded in little-endian byte order.
[U] New dates set by Edit > Adjust Date and Time sometimes get silently lost.
See http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Date/times_of_files for details and workarounds.
[U] Edit > Adjust Date and Time > Shift To New Starting Date And Time and > Shift By Set Number Of Hours writes the time in UTC rather than local time, as required by the standard, causing other tools to show the wrong date/time.
[U] In Thumbnail View, the Organizer incorrectly orders files that have unknown time. For example, it will show a file dated 12/25/1976 8:00 PM PST after a file dated 12/26/1976 (unknown time) on a computer in time zone PST.
[U] If you set a file's date/time fields to all unknown with Edit > Adjust Date And Time, the value of EXIF:DateTimeOriginal isn't cleared by File > Write Keyword Tag.
[U] Edit > Adjust Date and Time doesn’t properly handle US Daylight Savings Time when setting date/times many decades ago, e.g. October 5, 1961 12:00 PM.
[U] When setting the Organizer’s date/time for imported photos containing EXIF:DateTimeOriginal but not XMP:DateTimeOriginal, PSE 7 doesn’t properly handle US Daylight Savings Time in years prior to 2007, e.g. October 31, 2006 12:00 PM.
Minor Problems
[F] The Properties – Metadata window shows the wrong value for Date Time Original when the month, day, or time is unknown.
[F] When you save an edited photo as a new file but not in a version set, the edited version picks up the date/time and caption of the original but not the keyword tags, star rating, or notes.
Now, the edited version picks up date/time, caption, notes, and keyword tags, but not the star rating, which could be charitably interpreted as a plausible design decision.
[U] Deselecting the option Use “Last Modified” Date If EXIF Date Is Not Found does not work – the last-modified date is always used for an imported file that doesn’t contain an EXIF date.
[U] Edit > Adjust Date and Time applied to a file with time “unknown” decrements the date by one day.
[U] With the Import EXIF Caption option turned off, captions pre-existing in a file’s EXIF:ImageDescription metadata field reappear in the Organizer after invoking the Full Editor.
Searching
Major Problems
[U] The timeline doesn’t correctly display date ranges spanning many years.
[U] Using the Keyword Tags pane, you can no longer exclude a parent category from a search, e.g. exclude all photos tagged with any tag in the People category.
The User Guide gives two examples of how to use category exclusion that just don’t work in PSE 6, 7, or 8. Interestingly, you can almost work around this by doing a text search of “not <category tag>”, e.g. “not People”.   But this will also exclude photos that happen to have the word “people” in their filenames, captions, or notes, probably not what you want. You can also use the text query “not tag:<category tag>”, .e.g. “not tag:places”, but this will exclude all tags containing “places” as part of their name – there is no way to get an exact match of a tag name.
[U] Find > By History > Imported On sorts the photo dates alphabetically, rather than by date/time.
When the results first display, they are now sorted by Imported From then (correctly) by Date/Time. However, if you click on the Date/Time column header to sort by that column, the dates are sorted alphabetically (incorrectly).
[U] Find > By History > Imported On takes a couple of minutes on a large catalog, making the command almost useless.
[U] Find > By History > Imported On shows a scary message “Deleting Keyword Tags” that is apparently harmless.
[U] Searching with the Find Bar for “1 star and lower” doesn’t show photos with 0 stars.
Find > By Details > Rating Is Lower Than 1 Star does work.
[U] Searching for “0 stars only” doesn’t work for photos in a catalog converted from PSE 5.
[U] Searching with date ranges doesn’t properly handle time “unknown”.
Minor Problems
[U] The Show All button sometimes doesn’t appear if you quickly type a query into the Search text box and hit Enter.
[U] Setting a date range and then excluding two tags from the search clears the date range.
[U] Show All doesn’t clear a date range set by Find > Set Date Range (can be very confusing).
[U] Save Search Criteria As Smart Album isn’t available if a date range has been set but no other search criteria have been.
[U] When searching, you can exclude a keyword tag and then include an album, but you can’t do it in the other order.
User Interface
Major Problems
[?] On 1024x768 displays, and sometimes at higher resolutions, the Editor Print window is positioned to perfectly obscure the scroll bar of the drop-down list of printer profiles, leading people to think their printer’s profiles aren’t available.
I can’t reproduce this in PSE 8. The Editor’s Print dialog is all rearranged. But this bug struck some people and not others, so it may be still lurking.
[U] The menu bars don’t display if you have changed the screen DPI to be larger than 96 (as many people do on today’s ubiquitous high-res displays).
Adobe should be embarrassed about this, given that more and more computers are shipping preconfigured with higher DPIs. See http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#The_Organizers_Menu_Bar_ doesnt_show for a workaround.
Minor Problems
[F] Copying a paragraph from Microsoft Word and pasting it into the Notes field of a keyword tag causes some of the spaces between words to be deleted.
[F] In the full Editor, if at least one open photo is minimized to the Project Bin, Ctrl-Tab no longer cycles through the open windows.
[F] The Editor window can’t be resized the standard Windows way by grabbing any edge, just the lower-right corner.
Well, almost – you can grab the left, right, and bottom edges but not the top.
[F] Alt doesn’t underline the shortcut letters of top-level menu items in the Full Editor (but it does in the Organizer).
Both the Editor and Organizer don’t show the underline until you let up on the Alt key, whereas other Windows program show the underline when you first press the Alt key.
[F] The width of the Editor's Palette Bin can't be adjusted by dragging the left edge, as you can with all the other similar panes (Project Bin, Organizer Bin, Map View).
[U] In the Properties window of Full Screen mode, if you click in the Notes field and do Ctrl-A to select all the text, then click in the Caption field and do Ctrl-A to select its text, the notes remain highlighted.
[U] In the Organizer, Help > System Info reports the wrong amount for “Built-in Memory” on computers with more than 2GB of installed memory. (The command reports the correct amount in the Editor.)
[U] The setting of View > Show Borders Around Thumbnails isn’t remembered after you restart PSE.
[U] Ctrl-A to select all text doesn’t work in the text fields of the Properties window.
Interestingly, you can use ctrl-A in the text fields of the full-screen mode Properties window.
[U] Dialogs in the Editor sometimes bounce back when you try to move them.
[U] Dates are shown by Display > Import Batch as 2\20\2008 rather than 2/20/2008.
[U] In Create > Slide Show > Slide Show Preferences dialog, you can't use backspace or delete to clear the text in the Static and Transition Duration fields -- you need to select the text and then type over the selection (non-standard Windows behavior).
[U] Escape doesn’t close the full-screen-mode Properties dialog.
[U] You can’t use the Windows Explorer Tile command to tile the PSE Organizer and Editor windows.
The Editor can now be tiled by Windows Explorer and other window managers, but the Organizer still can’t.
Slide Shows
Major Problems
[F] The duration of a video clip included in a Slide Show is set to the default duration, not the length of the video clip, and right-click Edit Duration doesn’t change the clip’s duration.
PSE now sets the duration to the length of the clip. You can’t edit the duration, though – you can invoke Edit Duration, but PSE ignores the new value.
[U] An audio caption attached to a photo isn’t imported into a slide show even though the option Include Audio Captions as Narration is selected.
For an individual slide, you can give the Use Existing Audio Caption command to import that photo’s existing audio caption.
Editor
Minor Problems
[F] The Editor crashes if you invoke Quick Fix and use just one Touch Up tool (e.g. Whiten Teeth) and then save the file (but your changes are correctly saved).
[U] The File > Save For Web command doesn’t remember the last settings (e.g. file format and quality) after your restart the Editor.
For a workaround, see http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Allow_Save_For.

John,
Firstly, my apologies for the length of this post – it has been fermenting a while. For those in a hurry I have split it into two sections – the first contains some general comments on the situation with PSE (v 7 in my case) and Adobe (as I see it) and the second contains a list of issues that I have encountered and some suggestions for improvement. As with you, my comments are largely directed at the Organiser module within PSE.
Part 1:
Before going any further I’d like to say what an excellent job you’ve done in cataloguing, understanding and in many cases providing solutions to a number of bugs. Adobe should be paying you a hefty sum for doing this work. It’s a welcome change from a large percentage of what you read in blogs and forums to see things dealt with systematically, objectively and in an informed way.
I’m less impressed with Adobe’s approach. In my opinion, if you choose not to provide program updates to your customers (i.e. you get what you bought in the box and that’s it) then you have a moral obligation to make sure that what you sell is as robust and free of bugs as possible.
I would be very surprised if they were not well aware of the comments you have made (if they aren’t then that would indicate an appalling failure of their ability to process feedback). The fact that they have not, in subsequent releases, dealt with all of the issues that have been highlighted is not good. I would go further and suggest that it is actually a breach of fair trading practice and disingenuous to sell the product as “fit for purpose” knowing these bugs are still in place.
It’s unreasonable to expect software to be absolutely faultless, and this is why the issuing of updates is a much “fairer” system. The problem, I think, with Adobe’s approach is that to entice new customers to each release they need to provide new features. A natural consequence of this is that there is a temptation to prioritise development of new features rather than providing solutions to existing issues. There is no incentive for Adobe to change this state of affairs for as long as customers are purchasing their products. In this respect one of the problems is that many of the reviewers to whom prospective customers go will rely on first impressions and will not uncover many of the issues. Adobe may be comfortable with this situation (and on relying on the reflected aura of Photoshop) but their product is not cheap and there is plenty of scope for competitors to provide a more robust, dependable product at cheaper price. With free applications like Picasa they will need to be very careful they don’t drop the ball.
Don’t get me wrong I think the concept of PSE organiser is excellent (I actually prefer it to my experience of Lightroom), it is the quality of execution that I have issues with.
My first experience of PSE was version 3 and this was positive enough for me to purchase PSE 7. However, my biggest disappointment with PSE 7, because to me it is fundamental, has been the quality of rendering images in full screen mode. Yours is the first comment I have seen that comments on the appearance of “jaggies” when displaying images in PSE. My understanding is that this relates to the anti-aliasing which is carried out when converting from image to display resolution and the level to which this smoothes out gradients in hue, saturation and luminance. I never observed this problem is PSE 3. Although the degree of anti-aliasing is a subjective preference, I was deeply disappointed and still find it hard to believe that free or bundled software (picture manager, windows picture viewer, etc) can manage this when PSE 7 can’t.
Anyway, I’m not sure how to illicit a change from Adobe. One way is to write the sort of rant I have above although I doubt this will make much difference. In any case keep up the good work and hopefully something will come of it.
Part 2:
Some issues I’ve encountered:
Migration from Windows XP to Windows 7 – change in directory structure means that the “documents and settings” part of the user directory path in XP (i.e. c:\documents and settings\<<username>>\etc.) is now a shortcut which redirects you to the new location for user files which is c:\users\<<username>> \etc. If you are migrating from an old XP machine to a new Windows 7 one, you’ve kept your username the same and you have tried to retain the same directory structure then PSE 7 will still find files in your catalogue with the old style path. However, it will not recognise duplicates if you accidentally re-import the same files now they are on your Windows 7 machine. My workaround for this is to use an external file manager (e.g. windows explorer) to change the name of the directory that contains all of your photos. This causes PSE 7 to fail to resolve the path locations. You can then can select the relevant files and reconnect using the reconnect facility (File-Reconnect-Missing Files);
Watched folders are lost for any drive other than C when PSE 7 is closed and then reopened;
Duplicate files are not recognised and can be imported if they are not on the C drive (i.e. on an external drive);
Selecting a category selects all of the keyword tags/subcategories beneath it but excluding it does not exclude all of the keyword tags/subcategories beneath it; however, both selecting and excluding a sub-category selects and excludes the tags/sub categories beneath it;
Searches bring back the entire version set or stack even if only one of the files within meets the search criteria;
The instant search facility will sometimes decide that a number typed in is a date and will not find some files you would expect it to e.g. those where the number typed in is part of the filename rather than a date;
Anti-aliasing is insufficient – jaggies appear on jpegs displayed at certain zoom level. Interestingly this does not seem to occur if a jpeg has been created from a raw file through PSE 7 rather than an external application (at least for the camera I have).
Some suggestions:
Find duplicates facility;
Sort by filename and other file data;
Hide directories in the folder directory pane of the folder view if they contain no imported files – in PSE3 this was the only option and was actually quite useful to confirm that there were no imported files in a certain location (e.g. if e:\...etc was not in the list then you knew that you had no imported files located on the e:\ drive). It would be good to have this a display option.
Allow filters to be applied only to selected files;
Allow files to be rotated in the organiser without actually resaving them as a rotated file.

AutoFS + Samba share problems when share not online (especially in itunes)

I'm trying to look into having some or all of my media on a server for a couple of my macs, the main one of interest right now being a mac mini working as a HTPC under a tv, being operated 99% of the time with just the apple remote and frontrow.
A friend informed me that if you have your itunes library not managed and add files from a remote share then everything works pretty well. Namely if you try to play a file it will seemingly automount the remote file and start it playing. If the remote server is not available it will quickly discover this and after a short pause start giving explanation marks next to the broken tracks. Get the remote destination connected and then try to play a broken track and it will successfully mount the track and play.
Basically perfect.
I quickly tried accessing these files via a symbolic link or alias to them on the remote drive, in doing this i can be somewhat insulated from problems of trying to move the library to other machines/shares in the future. This all works fine but you do lose the ability for itunes to automatically mount the remote drive, which is a bit of a step back, but not a big deal on my normal machine. On my HTPC machine however i'd really like front row to be able to just work, hence automatically mounting the server as required.
The only problem was that when i tried with files directly added to the itunes library from a remote location frontrow would NOT automount the tracks/videos when you attempted to play them like itunes would do.
I've just spent the last few hours following the advice here
http://rajeev.name/blog/2007/11/22/autofs-goodness-in-apples-leopard-105-part-i/
to setup autofs in the hope that this would let me get auto mounting working as it does with itunes and directly added to the library remote files.
I boiled this down to the following settings
as root
vi /etc/auto_master
and add
/smb auto_smb
then create this new config file
vi /etc/auto_smb
and add
<Mount dir under /smb folder> -fstype=smbfs ://<share user>:<share pass>@<ip address>/<share point>
ie.
testMount -fstype=smbfs ://netuser:[email protected]/remoteMount
finally tell automount to throw away its cache
automount -vc
then the mount should be setup
df -h
shows the indirect map waiting
map auto_smb 0Bi 0Bi 0Bi 100% /smb
and by triggering it
ls /smb/testMount
you should connect and get a listing, a subsequent df shows
df -h
//[email protected]/Media 466Gi 325Gi 141Gi 70% /smb/Media
Everything worked well with the share getting mounted nicely when present, frontrow could just start playing the files it needed, perfect!!
The problem came when i wanted to simulate the media server being offline, basically frontrow, a lot of the system including finder, cd commands attempting to access the share, and itunes if you tried that would all freeze for long periods of time as they tried their best to get the files they were looking for.
I tried looking into getting this to gracefully time out and think i got somewhere by trying to setup the samba share to be soft linked.. I wasn't sure in what files i could add this to, first attempts didn't seem to do anything but adding this seemed to make a difference
/etc/nsmb.conf
containing something like
#Configuration file for example.com
[default]
minauth=ntlmv2
streams=yes
soft=yes
to turn soft samba shares on. Things like cd in a terminal seemed to behave quite well with this, when no remote share present you would get empty folders and the like. Finder would also seem to be reasonable with it.
Frustratingly itunes and frontrow both still have quite massive pauses even when finder and cds in the background show that perhaps the soft links are working and failing like they should.
I'm now left wondering what i can do to fix it, and resorting to perhaps having the files added via a symbolic link, using the login items to launch the remote share every boot and then having it so that all i need to do is reboot the HTPC mac mini if the server is on for it to pick it up and let me play the files. Otherwise they'll just be unavailable and will fail gracefully without locking up itunes. The perfect solution would be to either have a crontab running, or some applescript bound somehow to whenever frontrow is ran which manually tries to tell finder to do the equivelant mount the login items setup does.
It's frustrating though as its so close, and the autofs solution if it did work better would seem to be the perfect solution. Has anyone dabbled with this and got any suggestions as to options you can setup to make things not go horribly wrong when a remote share is NOT present, preferrably within the context of itunes or front row not complaining, but to be honest any suggestions i'll be able to try out myself.
Sorry i've written so much, perhaps some of it will be helpful reference as it took me a while to decipher that link at the top into just setting up a samba autofs.
Cheers.

It seems like it's not only the ArchLinux workstation that displays the norwegian letters wrong. The only machine that shows this correc is the machine that created the file/catalogue.
It seems like the windows 2000 displays the cataloge created by windows XP just fine.

Network shares can't be ejected? ("Ghost" share problems)

This topic is to try to solve a problem I'm having, as well as many of my Mac friends, when they use a network share, and it then cannot be unmounted.
Basically, there are servers no longer accessible, because we switched LANs, etc.
Symptoms: in the Finder, clicking on the "Eject" button next to the computer's name gives out a dialog telling "A disk on <share name> is in use. Try close applications. (approximately).
Of course, closing all applications doesn't have any effect, neither does relaunching the Finder.
In the Terminal, the command "mount" displays, among others:
//GUEST:@ines:139/Shared Docs em Vaio1 on /Volumes/Shared Docs em Vaio1 (smbfs, nodev, nosuid, mounted by xxx)
//GUEST@ines:139/Download on /Volumes/Download (smbfs, nodev, nosuid, mounted by xxx)
I tried umount "Shared Docs em Vaio1", as well as the other share, and yet it outputs "not currently mounted"
I then did lsof to check what files were open on these share, and the output starts with lsof: WARNING: can't stat() smbfs file system /Volumes/Shared Docs em Vaio1
Output information may be incomplete.
assuming "dev=2d000004" from mount table
lsof: WARNING: can't stat() smbfs file system /Volumes/Download
Output information may be incomplete.
assuming "dev=2d000005" from mount table
I've reached the end of my meager knowledge on this issue, which is minor (in the sense that performance is not affected), but relatively present nevertheless.
Of course it goes off when rebooting, but I want to be able to solve this problem without a reboot, so how can it be?

I don't know if it is the same with SMB shares, but with AFP ones I sometimes get this message when the share point is on my MacBook & it goes to sleep. The 'solution' -- such as it is -- is just to wait for the client Mac to notice the server isn't responding & pop up a server disconnect notice on the screen. Once you click the 'ok' button in that notice, the share point disappears from the Finder & no more messages about something on it being in use appear.
This notice can take several minutes to appear. I don't know of any way to speed up the process, or if it would be wise to try. I assume the long timeout is so that brief network outages are not problematic.

PSE 9 Problem Printing Multiple Photos

I am unable to properly print multiple photos in V9. For example if I select a single photo and select my paper size as 81/2x11 and try to print 5 copies of the photo in 3 1/2 x 5 size - the preview screen only shows a single photo and it shows it will only use one page. If I print it, the photo is printed one time on 5 pages. I have included a screen shot. The same thing happens if I print multiple copies of multiple photos. I know there is an option under more options to only print one photo per page but it is not selected. Even if it was selected the preview should show that 4 pages would print. I have duplicated this on more then one computer. This is a serious bug and makes printing from PSE useless. This started after I installed a recent upgrade.

I would like to add my experience with printing. As per the previous comments I have also used Elements since the first version and have undergone many upgrades, so believe I am qualified to make these observations. I have always used Elements to manage printing for our art and photographic business and have never had any issue and very little waste, very important when the paper and inks cost so much.
It would seem that the printing from Editor works much as I would expect.
Printing from Organiser does not work as it should. I have always used this for printing greeting cards and other multiple print options and would expect to set for individual prints to a specific size with a number of copies per page.
Observations of print problems:
Only one image per image selected appears in the preview window.
The preview window does not update to indicate multiple pages will be printed where more than one page worth is chosen.
Only one image is printed per page.
Images requested print one to a page, so in my case three pages for one image 'Use each photo' set to three.
In the 'More Options' is a tick box to select one image per page, this is not selected.
At this stage popped up a message stating Organiser is unable to print and will skip this page. The printer then prints 3 blank pages this being the number selected.
I am pleased to say that returning to PSE7 to check my facts I find it does exactly what I would expect, the preview page fills up with the number of images selected to print.
I would like to know if Adobe will be pursuing this issue as I have no use for PSE9 if it can't print as per previous versions.

SMB Share Problem

I have Windows Server 2003 with a couple SMB shares setup. My problem is that on my schools network I am able to connect no problem to the server when in my Dorm building. However when I go to a different building finder says "The server may not exist...Check the server name or ip address..." I am trying to connect using the Servers IP Address, I have also tried using DNS name and that doesnt work either. The catch is that when I am running Vista through Boot Camp I am able to connect no problem to the SMB Shares using the IP address, so Im curious as to whats different within the two OS's that one can connect and the other cannot.
All connections are Wired, the server is not behind a router within my room.
In finders connect to server i am enter smb://<ip address>

Your issue may be adressed by one of these threads:
http://www.macwindows.com/tiger.html
Good luck!

PSE 7 Problem

We have been using Photoshop Album 2.0 since it came out but decided it's time to upgrade to PSE. Album 2.0 currently has 14,000+ images. PSE installed ok but when Organizer was used to download the images from a file folder plus subfolders, it stops at 2,290 images and a Microsoft problem box appears. Tried twice and stops at the same number. Running XP with current Service Packs. Using Norton 360. Help!!

Since you have been using PS Album 2, you will want to upgrade your current PSA 2 catalog to PSE 8.
Your wording in your post is implying to me that you are Getting your photo files in to a new PSE 8 catalog instead of doing the Catalog upgrade.
Note: your upgrade process from PSA 2 will probably require more discussion and people find that coming from PSA 2 can require some additional work. However I think it is important to clarify your overall plan rather than just answering your current question.
Also please tell us if you now have a new computer with the Windows operating systems on the old and new computer because that will most likely impact recommendations for how you proceed.
P.S.So that I don't toally ignore your current results, here are some questions about it.
I have no immediate idea why it stopped at that particular place, Did you see any type of error message?
Do you see any thumbnails for the files that it was able to process and if yes, what would be the next file in the same Windows folder ? Perhaps that is a problematic photo or other media file.

PSE Install problem

I have not tried a bunch of times to install PSE 10 on my Windows 7 desktop (32-bit). It keeps getting to the point where it is trying to install the Shared Technologies package and then fails and does a roll back uninstall. I have looked at the install log and there are messages to the effect that some of the "payloads" cannot be installed "dependencies are x64 payloads which are not supported on this machine x86"
Interesting, I have been able to install the program on my laptop which is Windows 7 64-bit.
Does any one have any insight as to why I cannot install on my 32-bit desktop?
Thanks,
Doug

I solved the problem by doing one of the things suggested on the Elements Knowledgebase which was to start in a totally clean boot mode. First I tried just starting with all of my startup programs disabled and that didn't do it. Next I disabled all of the non-Microsoft services and clean-booted again. That did the trick. I noticed that one of those services was Spybot and this might have prevented the installation from making certain changes to the system/registry. So I guess the answer is to do the install with a totally clean-boot system!
Doug

PSE Creation Problem.

Hi,
I deleted old system PSE after the system refresh and now when I am trying to create the new one, I am getting the error in creating the new PSE in t-code STRUST. The system is BI 7.0 on WIN2008 server.
I have already tried with System restart after deletion of tmp files in /usr/sap/<SID>/DV*/sec, Tried to create the new PSE, Tried to put old PSE and replace it with the new SID etc... but none of them worked.
Could you please suggest, how do I go on this?
Thanks
Abhishek

Hello Juan Reyes,
Im facing the following problem when i try to login to webui .
SSO logon not possible; logon tickets not activated on the server Presently.(when
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 0)
Earlier SSO logo not possible : sso logon not possible no login ticket due to incorrect configuration(when
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 1 or 2) in profile parameters. please help with the right solution.
please find the attached screenshots.
Thanks & Regards,
Pavan.

Nokia 808 Gallery Share problem

Hello everyone!
I met a problem that I can not upload image gallery facebook.
The flickr, twitter youtube sharing works flawlessly, but when facebook, you'll want to sign and return to the gallery.
A similar problem can be as fmobi.
Have pointed towards the facebook and Nokia but no response.
If anyone has any suggestions, I will gladly accept!
I think the security token facebook ..
Sorry my poor English!
Regards M4C35!
Symbian 4ever
Solved!
Go to Solution.

Hi M4C35,
there are others discussions regarding this issue:
In English:
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/share-to-facebook-on-808/td-p/189480...
And in Italiano:
http://discussions.nokia.com/t5/Multimedia/Condivisione-da-galleria-a-facebook-non-funzionante/td-p/...
Is a common problem, we hope in a fix as soon as possible.

Editing IPhOTO 11 PHOTOS with PSE 9 - problem

I downloaded PSE 9 last night and have some problems. I already went to Preferences in IPHOTO 11 and selected PSE 9 as my editor. However, when I select a photo from IPHOTO to edit in an external editor, all I see is the First page of the PSE title page - the photo does not appear anywhere. Any ideas how I can get past this glitch? Thanks.

You used the wrong file as the external editor. See this for more details:
http://barbarabrundage.com/2010/11/29/using-photoshop-elements-9-with-iphoto/
Basically you just need to go back and choose the file directly above the one you picked before.

PSE 6 - problem with photos disappearing from Slideshow

Hello,
I worked on a slide show recently and then exported it to a .wma file. I returned to the slide show project in Elements a couple of days later to add another slide. Out of the 27 slides only three were intact. In 25 slides, there were no longer any pictures, but the captions were intact. The other one that was intact was a slide with just a caption. Also the timestamp on the slide show project was 2/12/2009 at 10.37 but I saved changes on 2/14 and those were saved (like the slide with just the caption I mentioned above) I don't know what happened or how I can get back to where it was before.
Thanks for the help!

> When I installed Adobe Lightroom, I was asked if I wanted to create a separate catalog for Lightroom or merge with the one from Photoshop elements. I chose the separate catalog for Lightroom and all the photos in the Photoshop elements organizer got wiped out (including a previous slideshow I had made)
I dont think that would normally occur, so something screwy was going on with your installation. Lightroom can import a PSE catalog, but it should never overwrite it. But Im not a Lightroom expert perhaps someone else more knowledgeable can help on that.
> I read other people having issues with catalog when upgrading to PSE7. So would that also be a case where you can lose the catalog(and the slideshow along with it)when you upgrade?
There are many potential problems that occur when you upgrade from PSE 6 to PSE 7. Of the ones that have been posted here, most people who have stuck it out get the problems fixed eventually, though I think many people give up in frustration before then.

BluRay Share problem in FCPX 10.1.1

It seems that somewhere along the line someone changed the default framerate setting in 10.1.1 Share to 25fps. There dosen't seem to be a way to reset it. 25fps is for PAL and will not play in US systems.

Hi James.
I'm not seeing that problem here.
The only thing that comes to mind is a corrupted preference, which is hopefully a FCPX preference.
If you don't have the free Preference Manager, download it here and run it (with FCP closed, of course).
If that doesn't cure the problem, create a new user account with admin privileges and run a test with a short project.
Russ

PSE 7 Share problems

Similar Messages

Maybe you are looking for