PSE11-Anyone with Printing Problems Please comment

I  earlier reported a problem with profiles with the new PSE11 and Mac OSx 10.7.5.  See my previous threads.
The printing paths in PSE11 have changed.  My problem occurs only on the first print every time I start up the application.
I am trying to diagnose the problem to approach Adobe with more information. 
So any issues with how it works differently/incorrectly compared to other versions please comment.  Even if you have to work out a bypass.
cheers elo
action so far
-delete and reinstall PSE11
-deleted all prefs
-checked Epson Support
-Registered with Adobe
-Run tests with different profiles generated by different applications/companies/myown
-Tests with previous version of OSx
-Run tests on PSE6,PSE9,PSE10 where it all works perfectly
To Do.
-replace Epson pro3800 print driver when I finish this weeks production work.  (new driver released two months ago to support OSx Mountain Lion.  Epson says it should not have anything to do with my problem?

I am having a similar problem.  Have you made any progress toward a soloution?
After many emails back and forth and then an hour and a half on the phone with Epson support they determined my problem is a PSE 11 glitch and suggested I try some forums and keep them posted!  Here is the problem.  I recently upgraded from PSE 8 to 11 and upgraded my Mac OS to 10.6.8. I have been printing from PSE 4 as I got better results from 4 than from 8. My printer is an Epson R1800.  When I launch PSE 11 and print an image it comes out terrific. BUT if I want to print a second image, or even the original image a second time it is terrible. I set the  "color setting" option to "Epson vivid" on the print menu.  That option is greyed out after the 1st image is printed.  Doesn't matter if Elements manages color or if printer manages color. One good print and then I have to close PSE 11 and relaunch to get another print.  Epson is suggesting that PSE is not “releasing” after the 1st print???
Any one else having this problem?  Many thanks

Similar Messages

  • When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?

    When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?

    Macs have crazy headpne jacks in different models.
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4

  • I've rented several movies over AppleTV, but can not download. I get a message "An error occurred loading this content. Try again later. " i've been trying for 3 days now... anyone with similar problem?

    I've rented several movies over AppleTV, but can not download. I get a message "An error occurred loading this content. Try again later. " i've been trying for 3 days now... anyone with similar problem?

    I have the same issue, to temporarily fix it go to Settings > General > Restart.  When it restarts the movie should play.  You have to do this for each movie for the most part.

  • Anyone having printer problems with adobe cs5 and mountain lion

    I can print one copy in adobe cs5 but if I hit the print button it shuts down the program.  Anyone having this problem besides me?

    Are the drivers for your printer are up to date? You probably can print one copy cause it doesn't access the option window in your application.

  • HP LaserJet 1022 Printing Problems - Please Post Here

    Sorry, I hate to create a new thread, but tracking so many different threads on this one issue is becoming problematic for me. So with that being said, if you are still having a problem with printing to a LaserJet 1022 after the full uninstall I detailed in the FAQ thread followed by installing version 2.2 of the HP driver package, then let me know here. And specifically I want to know is which device you have, how your device is connected, the print driver version, and what apps are giving you problems. In my own personal testing, here is what I have found:
    USB direct connect - OK, I have yet to run into a problem here.
    USB connected to an Airport Extreme N - OK, I have yet to run into a problem here.
    USB connected to an Airport Express G - Paused problem. I got print job/page out and then the printer paused and would not resume. I don't have a functioning work around here yet, but I'm trying.
    So if I were going to fill out my own form, it would look like this:
    Printer: LaserJet 1022n
    Connection: USB connected to an Airport Express G (Firmware version 6.3)
    Driver Version: 1.1.0.182
    Apps: All
    Problem Description: Printer queue goes into a Paused mode and won't resume
    And to get you started, I have left a blank template at the end of this post.
    Also please make sure to include whether you have the 1022, 1022n, or 1022nw AND how it is connected to your Mac. If users of the 1020, what to chime in on this thread that is OK. Anyone else, please post in the FAQ thread or a different device specific thread. As the 1022 seems to be the most problematic at the moment, I'd like to track this down as quickly as possible.
    Just trying to help.
    Andrew
    =====
    Printer:
    Connection:
    Driver Version:
    Apps:
    Problem Description:

    Printer: LaserJet 1022
    Connection: USB connected to an Airport Express N (latest firmware, etc)
    Driver Version: 1.1.0.182
    Apps: All
    Problem Description: Can sometimes print a single page but then all status lights flash on printer and I have to turn the printer off - other times, nothing happens (printer pauses and will not resume). Have tried connecting via Bonjour and IP address but same problem occurs.

  • Very Very Urgent...Printing problem please help me.....

    Hi there,
    Today, i struggled with one printing problem. can anybody help me please!. We are preparing reports using reports 10g. I created a report with orientatin of Landscape and Paper size is 11.5*8.5 that is A4 size and right margin 0.2 left margin with 0.2 and top and bottom margins with 0.5.Report output is correctly coming in report builder runtime. Now the actual problem is, this report must linked to one server for example http://xx.xx.xxxx.main.html.we linked the report generated by me to this link.
    when i run the report using this weblink, report is displayed in htmlcss(i opted) perfectly,now user can take the printout of this report by clicking print from file menu. The actual problem i faced is when i run this report in html link report is correctly displaying but paper size is letter and page margin are right 0.75 and left 0.75 defualtly. When i print the report with these setings date is truncating when user takes printout in html. User don't know the page margins i.e right o.2 both left and right (actually in report builder). So he cant adjust it correctly in file menu pagesetup in html page.He simply click print and it should come as with report builder margin settings. To solve this i change the default preferences in control panel ---printers, but no use. Is it possible to pass margins both right,left and top bottom margins as runtimeparameters in url of the this report. Is there any alternative way.
    Please do reply urgent, becoz since this is my clients urgent requirement,help me
    Thanks and regards
    thanx in advance.
    Jeevan

    Hi,
    Though HTMLCSS pages are created using the same page margins that you specify in the report definition, the problem may become more clear to you if you try to create PDF files instead of HTMLCSS. Set DESFORMAT=pdf, and see the output PDF file in Acrobat Reader. Do you see the margins that you want, or is the problem still the same? If you don't see the correct margins even in the PDF file, it probably means you need to modify your report definition to get the margins you want.
    In case you see the correct margin in PDF output, it means that your report design is fine. The problem is with printing. In that case, I think what other people have suggested you is true - probably the printable area for your particular printer is less than what you want.
    I'm afraid I may not be the best person to specify the printer or OS settings. Please consult your printer vendor.
    The other option may be to get output in PDF format, and print PDF files.
    Navneet.

  • Printer Problems please help!

    I have the C4480 all in one printer. I have searched the forums and troubleshooting pages and still cannot resolve the issue. When I insert a memory card from my digital camera directly into the printer I can print pictures without any problems. The copy function also works fine. The issue is I cannot print images or documents from the computer. When I press print it will take the page in about half way then it stops and just sits there. After about 5 or 10 minutes it will spit the page out but it only prints the first few lines of the image, the rest of the page is left blank. Also, the power button on the printer flashes while this is happening but no error messages are displayed. I have tried downloading the newest drivers. I also un-installed all the software and reinstalled but am still having the same issue, not sure what else I can try. Thanks for any help.

    I'd like to suggest you go to www.tune-up.com and download and install this program.
    You get a 30 day free trial to start. If you sign up as a reseller you can get the program for $29 after that.
    I'm not an employee of the company but I just recommend the program as it has fixed many a friends
    problems and has kept my computers and my familys computers running straight and clean with no problems.
    Even if you don't buy the program after using it and it fixes your problems you can uninstall it and consider it a blessing.
    I'm sure once you see what it can do you will think twice to buy it.
    Other than that, I don't know much about your system to even begin to try to tell you what to do as a troubleshooter.
    It could be any number of things that are wrong with it. Number one, the registry might be really messed up.
    Tune-up will fix that fix off for you. A computer is like a car, it has to be kept in tune in order to keep running right.
    Another problem area is malware and viruses. We all know about them but do we ever really know if we might have been bit
    by any of them. Most times not until something serious causes us problems. Can I suggest another program you might try?
    AVG Internet Security 2011 at www.avg.com.  It's another 30 day free trial program. I am also a reseller and have all my computers
    and family members registered and using it.
    I can tell you that with only these two programs installed on your computer you can rest easy and use your computer without any fears or problems.    Let me know how it goes for you. Good luck.
    Paul Streicher
    Tampa, FL

  • Caller Can't Hear Me - Anyone with this problem?

    I originally got my iPhone 3G last December 2008. It was working fine, though I noticed that after a couple of months, that it had a hairline crack near the headphone jack. Phone was still working, but I decided to bring it to the Apple Store here in Singapore (Singtel) last November 9, 2009. They replaced the phone right away with the note "Hairline Crack" on the receipt.
    After two weeks, I had a problem where I couldn't hear the person on the other line unless I used the headphones or put it on speaker mode. When you don't have the headphones plugged in and try to change the ringer volume, the phone will just display "Ringer (Headphones)". I tried plugging & unplugging the headphones, and even restoring, resetting, and it was still not working. One trick I found was that if I went to the Settings > Sound option, then try to change the volume of the ringer, it would work for a couple of calls where I can make a call without going on speaker mode or using my headphones. This was getting too troublesome.
    I went to the Apple Store (Singtel) again today, December 5, 2009, and they replaced the phone. Note on the receipt this time was: "Headphone Mode". Fine by me, as long as I don't have to come back again. I went back home, trusting that the replacement would be good. Guess what? Now I have a new problem! I can only make calls using the headphones! This time, I can make calls and hear perfectly, but the person in the other line can't hear me. Voice memo does not recognize any voice inputs. I have tried resetting, restoring, to no avail.
    Anyone having this problem? Any suggestions on what else to do?
    My patience is running out. Apple, don't disappoint me. I don't want workarounds or a badly refurbished product. I just want a working phone.

    I had the problem up until today.  There is a hardware problem with the iPhone internal microphone.  I went to the Apple store in Barcelona and they gave me a brand new iPhone.  I couldn't hear anything (except message tones, iPod music etc...) it was sooooo frustrating.
    Anyway, contact Apple, they'll happily provide you with a new iPhone!

  • Fan starts running after 15 minutes very noisy. anyone with similar problems?

    The fan starts after 15 to 20 minutes working with the MBair. Doe not stop. And it is quite noisy and disturbing. Anyone with a solution?
    Greets
    Mihca

    Believe me this is nothing unusual the F10 is a notebook with a strong GPU and CPU. These parts produce a lot of warmness and this must be cooled!
    Please dont compare mobile notebooks fans with the Qosmio. The Qosmio notebook properties are similar to a desktop PC and in my eyes an desktop PC is much louder as the F10

  • Problem with printing invoice. please help

    Hi,
    I am trying to print an invoice from transaction VF02 for a custom sapscript assigned. I went to:
    Goto >> header >> output and gave all the printing settings there. But when I save (even though I checkmarked both 'print immediately' and 'send immediately upon saving'), it's not getting printed in the printer I assigned. It gives some status message as 'Document XXXXXX saved (pricing error)'. I also went to SP01 also to see if there are any spool requests but could not find any. Can you please help with this so that I able to print it?
    Thanks in advance.

    Hi,
      If the "Release after output" is checked then once printed it will get deleted from the Spool.
      Also go to VF03 and in the outputs check the processing log if there is any error..
    Thanks,
    Naren

  • Please help with Printer problem on MBP

    I am running 10.5.1 and am trying to install the software to enable me to scan. I have tried from the original CD, but it doesn't work (i assume this is because it was meant for 10.4). I have also tried downloading from the website but the download always says something like "19mb out of ?" and then eventually the downloads errors out.
    Is there any way i can get the scanner to work? can anyone upload this software to me? I know its a lot to ask but im not sure what to do.

    Don't know what to tell you, but I downloaded the file without any problem. Do you have enough space on your drive for the file? You may have a problem on your drive so you might consider doing the following:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger and Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Further info on 6980 printer problems please read this one

    I have a HP 6980 deskjet that I attach via usb to my macbook when I need to print. Everything has been working fine for a year now except yesterday it gives me a message "problem printing to printer, please check that the printer is chosen in the print centre......" this is not exact but pretty close. I can post the exact message later when I am at home and can check it. Does anyone have any idea what may have caused this to happen so randomly? I never did install a driver or the CD because when I plugged the printer in, it was just there automatically (which I thought was just awesome). Anyway - any help will be much appreciated
    Tried to install the driver from CD and I got the message " The software to be installed requires administrator or higher level access privileges" I had the right password and have installed other software - what's up with this.
    I tried to add the printer again after removing it from my list. This is the message I get when I try to add the printer - "An error occurred while trying to add the selected printer successful - ok - cnflicting attributes.
    This is the error message I would receive when the printer was available before I removed it - Word cannot print due to a problem with the current printer. Make sure you have a printer selected in print centre. You may need to print again or adjust your printer settings.
    I haven't had one problem in the year that I have had this printer and it is not a problem with the printer as it will work when connected to other computers. HELP PLEASE!!

    no replies...

  • Updated to OS X 5 & now with printing problem

    Just updated from OS X 3.8 to OS X 5.0 and then thru 5.8. I have a G-5 Dual 2.5 from the old power days and HP Office 5500.
    So far everything has worked fine except that I can't print docs such as Word, Excel or pdf.
    The G-5 is communicating with the printer, test's work etc and printer makes noises and then does nothing for doc excel or pdfs. and then que's them up. I get this error message
    "/private/var/spool/cups/d00517-001'"
    I got the error message before and after I up dated my HP driver software.
    Please help!! Thanks
    cj

    "tx" a brody for the link but a couple of weeks later I still haven't solved the problem.
    I've gone to various links and finally again? downloaded new HP driver software... the latest available 10.4... no 10.5 and of course 10.6 won't work.
    At least before the printer would click and whirr and act like it was ready to print.
    Now I don't even get that . Nothing.
    Please anyone... I need to print some things and now more than willing to pay for getting it to work.

  • IPhoto Printing Problems - please help!

    Hi All,
    I'm having continued problems trying to sort out printing from iPhoto '09. I dont have a great printer - Epson Photo r265 so it is a cheapy however it does print fine. If I print from my PC to this printer it works perfectly. Therefore I assumed there was a driver issue between the mac and the printer. Finally I worked out how to get the correct epson driver as opposed to apples version installed and set as default. Now the photos no longer have crazy lines all over them but the quality remains very poor by comparison to printing on this printer using the same photo from other sources.
    I then downloaded Epsons easy photo print. If I print using this very basic package on the mac now the quality is much better (still not amazing though but certainly acceptable). So it sounds like problem solved??? ..... NO!!! The problem is that the Epson Easy Photo Print software cannot 'see' the photos in iPhoto and so to print, you first have to copy photos to desktop or some place else outside of iPhoto. This all seems due to iPhoto's wierd need to keep its arms locked around the photos within it with the result that when you look in Finder all you see is a file called "iPhoto Library" .... and 3rd party software as simple as this epson print package cannot translate this and see the photos within.
    Can anyone help here and give some options?
    1. Is it actually possible to print at good quality from iPhoto?
    2. Is there other printing software I can use which will actually be able to see the photos in iPhoto Library
    3. I even though my printer is very cheap and basic i know it is not its fault - that said are there printers better optimised to use with a mac? I would consider changing the printer if needed as I'm really sick of this.
    4. Can I change the iPhoto settings somehow to stop all my photos appearing as a single file - "iPhoto Library"??
    All help much appreciated.
    Adam

    The first of these might help:
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • Ridiculous printing problem - please help!

    Hello, I have Photoshop CS5 and an Artisan 800 printer, and I'm in the middle of the biggest printer nightmare I've ever had. 
    I need to print a DVD insert, printing to regular letter paper in landscape mode.  11x8.5.  Landscape is selected.  Letter is selected in the printer.  So both Photoshop and the printer know they're dealing with the same size.  But when I click print, I get the stupid 'Image is larger than paper's printable area, some clipping will occur' warning, which is weird, because the image size and the paper size are exactly the same. 
    Then things actually start getting weird.  If I tell it to print anyway, it cuts the image off a few inches before the end of the righthand side of the page.  If I tell it to scale to fit media, then print, it cuts the image off at the same spot, as if nothing was changed.  My PPI is 300.  I've checked and rechecked that the settings are the same on the printer and in photoshop.
    Finally, I figured maybe it was somehow just my document causing the problem.  So I open a new document, and tell it to print just a regular 8.5x11 letter.  Didn't even put anything there.  Just printing a blank page.
    It says it's too big to fit on the paper!
    I'm working on a fairly big job right now and need to print forty of these things by Monday.  I'd really rather not have to go to Kinko's or something, as this is all out of my pocket.  Plus I can't believe that with a program I spent this much money on, and a two hundred dollar printer, an 8.5x11 page is too big for me to print.  Any help is greatly appreciated!

    You have not provided enough information for others to help or clarify things for you..
    What exact version of Photoshop are you on?  12.0.4? 12.1?  Perhaps you have not applied any updates at all?
    What exact version of the OS are you running?
    What exact version of the printer driver?
    What are the exact pixel dimensions of your image?  (How many pixels wide by how many pixels high?)
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for