PSE7 'Fit In View' Bug?

I used PSE7 on Windows Vista 32-bit with no problems.
I recently upgraded to Windows 7 Ultimate RTM 64-bit. Now the 'Fit In View' option does not work after cropping.
Any way to solve this?

Try resetting the prefernces, if it helps.

Similar Messages

REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
documents which contain some of their pages in landscape orientation.
publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
Thank you in advance.
Message was edited by: George Notaras
Improved descriptions of example documents.

To add to this, if you prefer you can separate your JavaScript from your JSF pages.
Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
(This can also be a URI reference to a JavaScript file hosted on a web server)
<f:facet name="metaContainer">
<af:resource source="/js/myJsFile.js" type="javascript"/>
</f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
A solution is to use <trh:script>.
Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
then in place of the above code use:
<f:facet name="metaContainer">
<trh:script id="script1" source="/js/myJsFile.js"/>
</f:facet>Now after a page submit the JavaScript still functions.
Edited by: Matthew Carrigy on 12/08/2009 10:39

How can I display a PDF in Fit-Page View mode in Firefox?

I would like to use Firefox to view PDF documents from the web - but cannot get the PDF fit-page view to be a Firefox option. For large PDF files, I then have to scroll slowly through them - whereas in Adobe Reader, I can view them page by page and scan through it much quicker.

If you just purchased Acrobat 10, you might be eligible for a free upgrade to Acrobat 11, which is suppposed to have much improved export to PPT.

Pages 5.5.1: fit width view doesn't adjust

Other than the answer 'keep using Pages 09 until I absolutely have to switch to something else', is there any way to get the fit width view in latest Pages to adjust as you resize the window? In 09 the page is responsive, and if I change the window size, the view and zoom change accordingly. In the latest Pages however, when I choose the fit width option and resize the window, the width doesn't change dynamically.
Thanks for your help
Trish
iMac 27" running Yosemite and latest version of Pages

Silence, (crickets chirping).

Does Premiere CS6 have a timeline "Fit to view"?

I'm a former FCP editor of 8 years and a new convert to Adobe Premiere since Apple's introduction of Final Cut X.
Trying to make the adjustment and get used to some of the new functions and keyboard shortcuts.
One thing that I'm not able to figure out is how to do a "Fit to View" for the timeline contents. In Final Cut, there was a keybaord shortcut (Shift-Z) that would scale the timeline so that it automatically framed all of the contents of the timeline. I used this function a lot and am hoping that it exists in Premiere. Can't seem to find it though.
Any thoughts?

Use the "\" key for fit to window. If you go the keyboard shortcuts dialog and set the keyboard to FCP 7, you can use Shift+Z.

Ctrl+Shift+W No longer fits to view

Ctrl+Shift+w no longer fits the current drawing to view. Ctrl+w (fit to view shortcut before 2010) is still close window.
Keyboard keys are definitely working, windows update doesn't show any recently installed updates to Visio.

Hi Sir,
I need more information about the issue to troubleshoot.
Did your machines in a work group or domain environment ? Because you said, you and your colleagues all encountered the issue, please give me the update list which had upgrade before the issue happened. I'll check the updates
if they were included some fix about Visio to remove the keyboard shortcut association.
Did Visio 2010 lost the only one keyboard shortcut in Visio 2010? Please refer to the
link and try the other keyboard shortcut. Did you had be installed some programs recently? If only the "Ctrl+Shift+W " lost, it may be the third-party programs and Visio 2010 keyboard shortcut conflict.
Had you repair Visio from control panel| programs
Regards,
George Zhao
TechNet Community Support

Bar View / Time View : Bug or Feature?

When switching between 'Bar' view and 'Time' view - there always results in a change in zoom level too.
For example if I'm viewing a complete arrangement in Bar view and then switch over into Time view, I have to then zoom out to fit the whole arrangement in the arrange window.
Seems to me like a bug. (small but nonetheless pesky!!).
anyone else get this behaviour?

Yes - I've gotten used to always setting up a cycle at my zoom spot before switching the view mode - this way the zoom will always catch up with my playhead when I hit play. I think it's a Bug - certainly not a feature...

ICal Daily view bug

Hi, I'm having a strange bug in iCal, I hope you can help me.
In the day view, the date and texts on the left side are too big and cropped.
Increasing and decreasing size only affects the right side panel.
I deleted the app via terminal, reinstalled it with the Lion DVD I burnt, and made a combo update. The bug is still here.
Deleted the preferences. No success.
Here is what I see : http://dl.dropbox.com/u/4894405/WEBPOSTS/iCal_bug.png
Thanks for your help.
Cedric

Greetings,
Its likely you have a settings issue in your user account rather than this being a bug within the iCal application itself.
To be sure you can create a new user account on your computer and test: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mtusr001.html
Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
If that does not resolve the issue:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion:
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps!

IPad Ical Week View BUG

I just realized this problem on my iPad.
In the WEEK VIEW... the Right Arrow does not respond in either the portrait or landscape mode. when tapping the next week, the previous week is displayed. and when tapping the left arrow, the week skips one week and displays 2 weeks back.
For example if i am dispalying the week sept 5 - 11, tapping sept 12-18 will not show that week. But tapping sept 19-26 will display the sept 12th -18. Also tapping the left arrow goes back 2 weeks instead of just one.
I was on call with Apple for 2 hours and did every single trouble shooting step and they were quite suprized themselves with this problem. He said it was never heard of.
I checked it on a friend's ipad and the same bug was on it too. I am relieved that I am not the only one facing this problem.
I wonder if an update will solve this even I was asked to send the Ipad to the Service center. But now i wont coz we know its not a Hardware problem.
Wish there is a solution to this soon.
Please reply.
Cyrus Dubash

Yes i restored it as a New iPad with the Calendar completely empty. But still the same problem. Apple says I am the first to complain about this problem and they need to see the iPad.
I live in India where there Ipad is not launched and so the nearest service center is Singapore. On having checked if the same happens on another iPad, I checked it on my friends iPads and out of 4 more, 2 had the same problem as mine. So now i know it is not a problem with the hardware. and so i dont intend to send it to the service center.
I hope the next update solves this. I usually use the Week View and its disappointing that that view itself has the bug.
Cyrus

Calendar 'List view' bug

I'm still patiently awaiting a fix from Apple (who are apparently aware) for the bug discussed at length in another thread which has now been archived. See here... http://discussions.apple.com/thread.jspa?threadID=2470805&start=60&tstart=0
Further to that thread, I have noticed that this problem does not occur when changing entries while connected to my home 3G network.
When I go abroad I disable Data Roaming and only use Wi-Fi. Changing any appointments then somehow corrupts the dates of nearly all the other appointments but only in List view. All appointments on MobileMe still show correct dates so it is only on the iPhone's List view.
Whether this is due to being in a different time zone (Time set automatically in Settings) or Wi-Fi, I don't know.
Please Apple... fix this bug.

In my Calender I have the same bug. I haven't found any help.
Emil

Month View Bug in Desktop by Access

When I try browsing prior months in my palm desktop using month view, palm desktop crashes when I try to go back further than June, 2008; however, if I try to access periods prior to June using day or week view, I can view them without a problem. My Centro does not seem to be affected either, and I've run Pimlico software to try to identify any bugs, but I can't locate any. Since I don't use month view very often, I can't tell when this bug first emerged. I installed a backup Datebook file (that was a couple of days old), but that didn't fix the problem. Any advice would be much appreciated.
Post relates to: Centro (Verizon)

WinXP. Centro (verizon). USB synch.
Same problem Feb 08 crashes. Checked spanning midnight, long fields etc. Nothing helps.
Then, synch was hanging up in Calendar. Pushed cancel on Centro & HotSynch to no avail. Respectively, pulled out battery, used Win task manager.
To correct synch problem, overwrote Centro from desktop. After I did this, was curious, and tried to do the reverse. Got hung up again.
Then got free version of DbFixit. Told me I have a Datebook problem on 12/31/69 -- Centro calendar only goes back to 1/1/70! Care to explain?
DbFixit: "Calendar DB-PDat: Last blob not aligned with end of record. Rec=26. Date = 12/31/69"
Threw in towel & purchased the DbFixit version that self corrects. I'll let you know if it helps or not.
Regards
PS To Centro Marketing: Not being able to print out a monthly calendar is, for me and probably many others, a real negative.
Post relates to: Centro (Verizon)

PDF viewer bug/ v1.4.5

This is still not fixed. Try this- open a PDF, zoom in on an area and wait for the Pre to autooff. When you resume, the PDF viewer has crashed.. There is a spinning circle in the top right corner and if you enter a new page number, the total page count disappears.
Also, when are we going to get an app that uses the accelerometer? My Nokia and Samsung terminals rotate the screen when you move the phone.. maybe its me, but I don't consider this an option these days, it's basic functionally. Only the browser app works in panorama.. With PDFs and the tiny screen, you need to zoom and the extra width would really useful.
Finally, with a touch phone, you kind of expect to be able to swipe to the next page or back a page. Instead, you still have to hit an arrow..
Post relates to: Pre p100ueu (Movistar)

To confirm, no this problem has not been fixed on WebOS 2.0, but that's because it's not a WebOS problem. All of the apps from WebOS 1.4 were merely ported for 2.0 for usability with the new version, so any bugs appearing in the 1.4 version are sure to show in the 2.0 version as well.
On a side note: it would also be possible for some bugs to appear in the 2.0 version that aren't in the 1.4 version, so perhaps Palm hasn't fixed the problem yet because they are trying to find a resolution that works for both versions.
P.S.: The accelerometer works on the following native apps: Web, Clock, Camera, Photos, Videos, Facebook, QuickOffice, and Help. I do agree, though, that there should be more use of it since the compass is being included in the Pre3. Why have such extras built into the phone if support for this hardware is not there? (Rhetorical question unless someone from Palm/HP cares to answer it)

ITunes 7 - movie trailer viewing bug?

Hi, just upgraded both iTunes and Quicktime. Everything is working perfectly except for viewing movie trailers.
The Bug:
When I choose "View Trailer" I can hear the audio and a box appears with the iTunes background of what was previously in that position (ala - a cut&paste effect) but no video.
The Temporary Fix:
If I close iTunes (not Quit) and reopen iTunes from the dock - Viola! There's the trailer.
Again, everything else is working great. Any suggestions?
(p.s. - off topic - I can't post to this forum from Firefox - only Safari. Waa!)

Thank you for posting that workaround--I was having the same problem. I hope there is a fix soon.
Power Mac G4 Dual 450 Mac OS X (10.3.9)

Cover Flow view bug

Is there a better place than this to submit bug reports to Apple?
Problem: Multiple albums named the same (i.e. Greatest Hits) by different artists have problems in Cover Flow view. The albums have separate cover art, but when selecting the album to look at songs in the album, all songs on every album named the same show up. This can't be what Apple had in mind, since in iTunes, the Cover Flow view sort default is "Album by Artist", and it's not a problem seeing other artists albums named the same. This is also a problem in Album view, where there is only one entry for all albums named the same (i.e. Greatest Hits).
Solution? Add secondary search criteria (artist) for both Cover Flow and Album views. This way, each album is a separate entry (album view) and has only the correct songs (cover flow view).
Love the Nano 3rd gen, but this bug is very blatant and should have been fixed prior to release. Apple, please fix it. I don't want to have to rename all my albums "xxxxxxx's Greatest Hits"!

Quick follow up. Is there a setting in the Nano to fix this (sort by option)?

Essential event viewer bugs with "Forwarded Events" log in Windows Server 2008 R2 and Windows 7

To my general experience, Windows event viewer is one of the most problematic, faulty management tools in the case of extensive use of its more sophisticated capabilities. The sole description as well as reproduction of some entangled failures would require
remarkable effort.
With the "Forwarded Events" log however, the situation becomes particularly worse in that even simple functionality fails and workarounds are difficult to find. That’s what I’ll describe here in order to share my experience with interested users.
For precision: I’ve extensively used event viewer on a German Windows Server 2008 R2 SP1 (Windows SBS 2011 Standard SP1). The bugs I found on that system, I could reproduce on a German Windows 7 Professional 64-Bit SP1, too.
Problem 1: Failure of even simple event filtering
To reproduce this problem, execute these steps on a test machine with any of the two OS mentioned above:
(i) To prepare log contents, do either of the following:
(a) populate some events to your local "Forwarded Events" log (most simply by subscribing events from other logs of the same machine; stop subscription if you have collected some events)
Or
(b) copy a non-empty log file "ForwardedEvents.evtx" from another machine (with any of the two OS mentioned above) to your test machine and open the file in event viewer.
(ii) Navigate to your "Forwarded Events" test log and open the filtering dialog. In the "Includes/Excludes Event IDs" field, type: 1-9000. Click OK.
(iii) Look at the results pane: Surprise, 0 Events! Do you really have no event IDs between 1 and 9000 in your test log?
(iv) Another example, if you have forwarded security events in your test log: Clear filter, if any previous filter is in place. Open the filtering dialog. In "Keywords" sub-dialog, choose "Audit Success". Click OK.
(v) Look at the results pane: Surprise, 0 Events! Do you really have no successful security monitoring events in your test log?
I’ll finish here. If you have a rich variety of events in your test log available, let your imagination run wild to test around. Finally include some simple manually created or modified XPath filters on the XML tab of the filtering dialog. I promise, you’ll
find a lot of additional strange results.
Problem 2: Cannot save manually selected events to .evtx file
Navigate to your "Forwarded Events" test log. In the results pane, select one or more events by highlighting them by mouse clicks. In context menu, choose "Save selected events". In the "save as" dialog, choose file type *.evtx
and save your file. Open the newly created file in event viewer. Result: Surprise, no events inside the new file!
Have more fun with forwarded events
Helmut

Did you mean that right click Forwarded Event and select "Filter Current Log..."? Since I can filter correct event vai the "Filter Current Log..." in my Lab environment.
Hi Justin,
yes, I mean "Filter Current Log ... " (in my German systems: "Aktuelles Protokoll filtern ... ").
What do you mean with "my Lab environment" exactly?
In the meantime, I performed additional tests. I copied the "ForwardedEvents.evtx" test file from Server 2008 R2 resp. Windows 7 to
(i) German Windows 8 Pro 64-Bit RTM
(ii) German Windows 8.1 Pro 64-Bit, up-to-date
in order to view and filter the file there.
Results: Same event viewer problem on Windows 8 RTM, but correct behavior on Windows 8.1!
Best regards, Helmut

PSE7 'Fit In View' Bug?

Similar Messages

Maybe you are looking for