PSE9: prompted for "save as" during batch processing??

In PSE 9, my process multiple files seems to have stopped working. I am trying to batch convert some CR2 files to Jpeg. When I try to run it I get prompted during the convert operation to "save as" for each individual file (and the jpeg isn't an option). This used to work, anyone know what changed?
Thanks for the help,
Jamie

Raw files work best as already open images in the Editor.
Try using open files (File à Open) then select your batch of raw files using Shift+click or cmd+click to select individual files. Wait for Camera Raw to open and click the button Select All (top left) then apply your saved default settings to all the selected images. Keep them all selected, choose 8 bits/channel and click Open Images (towards bottom right) to send the selected images into the Editor.
After the Editor opens go to the top menu bar click File >Process Multiple Files.
Set the dropdown for your source to Opened Files then for the destination, check same as source or a new folder.
At the bottom of the dialog under File Type choose the jpeg quality from the dropdown e.g. Max, High, Medium or Low.
Click OK and leave the program to run (this can take a bit of time as raw files are usually large). When finished close the Editor and return to your folder to see your Jpegs next to your raw files. Or go to your new destination folder if preferred.

Similar Messages

Save or Export Batch Processing

I have created several different batch processing in Acrobat 9 for Windows to reduce the size of PDF files as well as OCR the files.
I do the same thing with Acrobat 10 and I can easily export the processes (it's called Actions) and reimport them into another computer with Acrobat 10 installed.
My question is, how do I save/export those batch processing steps in Acrobat 9 so I can re-import them when I needed?

Thanks for the super fast reply. I found them under (it's WinXP OS):
C:\Documents and Settings\%username%\Application Data\Adobe\Acrobat\9.0\Sequences

Process multiple files prompts for "save" at every image

Hi, I am trying to use Elements 10 to convert Panasonic RAW files to JPEGs for web use. The batch runs, but prompts for a "save" location at every file. I have reinstalled Elements, reinstalled the Camera RAW update, and have ensured I have ownership of source and destination folders (in Windows 7).
I have tried several folders, set up test folders etc. and nothing seems to work. Does anyone know what I am doing wrong? Its been ayear or so since I did this, but it used to work. TIA.

Try selecting all thumbnails in camera raw (left hand thumbnail strip) then click the open image button (bottom right) to open them in PSE Editor. When the images appear in the project bin use:
File >> Process Multiple Files
Use the source dropdown for Opened files
Choose a separate folder for destination
Then set your jpeg quality/size.

Writing the filename as the prefix for bates or page numbering during batch process. PRO 9

While batch processing in Acrobat PRO 9 I am trying to insert the file name as the prefix automaticily either for page numbering or bates labeling.
Not very good with javascript. Any one have any ideas?
Everyone is always asking to have the filename as the prefix and it starts to wear on you after 1000 exhibits.

Don't know what script you're using, but this command will return the document's file name:
this.documentFileName
and this one will return the full path:
this.path

Odd quirk during Batch processing...

When I do a batch process (File/automate/batch) it all works fine, provided I leave the cursor where the dialog box keeps popping up. If I move the cursor (to do something else and leave it running in the background) the batch stops until the cursor is back over the dialog box.
I'm using CS5 on OSX SL. The plug-ins that this currently happens with are the Topaz ones, which require that I open them, do what I want, then close and save, and re-open for the next image. All rather tedious, but I don't see any workaround.

Sounds like it might be a shortcoming of the plug-in, in which case its producers might be the only ones who could help you.
Hopefully someone else has more insight into the matter, though.

Disable all informations (popups, alerts etc.) during batch process

Hey! I'm using Acrobat 6.0 and the open all batch process to convert various office documents. For each document I have to agree to some alerts like "The document was changed. Do you want to save it" or "Acrobat can't save bookmarks beacause..." - or something like that... I think everybody can imagine what I mean and it doesn't matter what exactly is the content of these popups...
My question: Is there a posibility to turn off all these messages? Maybe with some lines of JavaScript Code? Or pipe these messages to a text file instead of showing it on the screen?

Thanks for your answer. I mean both things, although I haven't yet a JS function so I prefer the feature Batch Processing which is part of Acrobat 6.0
Unfortunately the "Save warnings and errors in log file" preference doesn't work. I think the problem is, that these errors are special Batch Error. But this isn't what I mean...
I will now describe exactly my problem. I'm using Acrobat 6.0 and MS Excel 2003. With several Makros I created special Excel files. With some (not all) tables in the Excel file I made a group (because I want to convert only these tables...)
When I start the batch processing, the following messages appears (which I have to accept or deny... this is exactly what I want to disappear because with these messages I haven't any automatism or real "batch processing"....)
1. After starting the batch process, first message...
::Acrobat PDFMaker::
Acrobat PDFMaker have to save the document before continue. Should PDFMaker save this document and continue?
2. ...and then after some seconds...
::Acrobat PDFMaker::
'Name of my table' - Acrobat PDFMaker can make Tags, Bookmarks and Links only for tables with the printable area "Whole Table". Delete in the section "Page settings" the field "printable are" to avoid this problem.
Would you like to continue and create a PDF File without Tags?
3. .. and finally Excel also have a message for me:
::Microsoft Excel::
Save all changes in 'Name of my Excel file'?
After that the first PDF is successfully created. Then it happens something really strange. I can see in my Acrobat the little window with:
'Name of my Excel File', 2 from 2
(-a progress bar is shown with 50%-)
Please wait. Adobe PDF is making.: 100%
and then i can wait and wait and wait... But nothing more wil happens! :(
Any idea to solve these problems?
To implement the batch processing feature in an own JS function... How difficult is it? Are there any examples/experiences? And the most important thing: can i really disappear the popup messages?
Thanks and sorry for my english... ;)

Can you Send for Shared Review in Batch Processing JavaScript?

Hello! I am new to javascript and Acrobat 9 Pro. I have multiple documents emailed to me in a day and need to send/track each one individually. Can this be done using the Batch Processing javascript as a Shared Review?
I have tried adding a button to the "Add-On" toolbar and start a shared review but can't automate manual key entries for the dialog windows that opens for a Shared Review.
What I am looking for is a js file to add a button to execute Send for Shared Review, Select multiple files dialog window, open the standard dialog windows for Shared Reviews one time and then do the same to all other selected files.
Can you please help, and maybe supply some javascript examples?

Please repost in the Acrobat Scripting forum.

Prompting for SAVE as the document with Digital signatures in 8 or above

When i am doing digital signature on Adobe PDF 8 and above , it is prompting to SAVE AS the document.I am accessing the PDF documents from my document management application and signing on that.So Save as wouldnot work for our case.It should save on the default existing location.How to solve this issue?

Thank you very much for your responses. The final post on the forum at the link you provided explains the issue. It appears to be some sort of conflict with the Windows Explorer document previewer that is causing this. Whenever I am previewing the document I am working with in the Explorer, I cannot save changes. As soon as I preview a different document, the changes can be saved without any problems. In the interest of providing further information so that a more permanent solution can be found, I am running Windows 7 and have had this problem with Acrobat 9 and X. Files are being saved locally. Unfortunately, I do not have the savvy to tell you what kind of server.

What triggers the prompt for memory test during boot up of WLC.

I have a controller that sometimes does and sometimes doesn't prompt for memory test at boot up. What triggers the prompt for memory test at boot up?

We have the same behaviour with a 4402 controller.
After a software upgrade from 4.2.130.0 to 4.2.176.0 the controller didn't reboot automaticly during the first restart with the new software. I connected via console and saw this message:
Airespace 4200 Wireless LAN Switch Board - Memory Test
Invalid Option...Press any key to continue
Airespace 4200 Wireless LAN Switch Board - Memory Test
1. Restricted [4kB per MB]
2. Entire Range [512M]
3. EXIT
Then I choosed option <3 Exit> and the controller started correct.
Regards
Hendrik

Prompts for save chages even if it is an EXE

Hi All
I have a program which I made into an exe but when the program closes the front panel to exit, it will prompt to "Save changes".
Some items on the panel are repositioned when it is running and I do not need to save the changes. But I dont understand why it will ask this even if the program is turned into an EXE
Any ideas on how to stop the "save changes" prompt from comming up?

I haven't tried this but try adding a revert vi method in your clean-up/shut down code since you don't want to save the changes anyway- tossing em out seams sensible.
Whoops revert method won't work(not available in run-time not writable while running)
Hmmmm....
Jeff

File name overwrites during Batch process

Mac, OSX, CS2. (and Windows CS2, CS3)
I've searched and read plenty of posts about this problem, but I don't see any solutions. Maybe a few workarounds. So, I'll try myself. This problem does not exist prior to CS2 for me.
I'm writing an action that involves opening a PDF, trimming, etc, then saving as a TIFF.
My result is one file, overwriting itself (with the contents of my source folder) with the name of the file I used to write the Action. I don't "touch" the file name in the "save as" dialog box, but of course I have to "save as", because I need a different file format than the source.
I've been using Actions/Batch/Droplets since they became available, maybe Photoshop 4. I just don't get this.
Thanks for your consideration.

duplicate post
Ask your question only once.

Prenote - Prenotification for A/P during payment processing

Hi all - we're running prenotes for A/P (combining with payroll for the output to the bank). I have no issues with the prenote in general (file creation - sending to the bank - bank error file load into SAP). Where my issue/question resides is around what happens to vendors in prenote status when running the F110 payment run for ACH (PMW used).
I edited a vendor's banking data - selected them for prenote - created the prenote extract file - THEN - I ran an F110 ACH payment run on them. The proposal shows the ACH DME creation. I would have thought that they should have been switched to a check payment method by SAP automatically as this vendor should be in prenote status. I'm thinking it might be an event function module that may need to be activated, but the ones I see appear to be mostly around Contract Accounting (we're not using).
These are the function modules around prenote. Ideas? thanks.
F4IF_SHLP_EXIT_DFKKPNBKA_RTCOD     Search help for prenotification return code
FKK_GB_BACS_0610     Event 0610: payment block due to prenotification status
FKK_PRENOTE_ACH_00     Format specific sorting of prenotification data
FKK_PRENOTE_ACH_1052     Change of business partner master data triggers prenotification entry
FKK_PRENOTE_ACH_30     Detail recod of the prenotification-ACH
FKK_PRENOTE_AUDDIS_00     Format specific sorting of prenotification data
FKK_PRENOTE_AUDDIS_30     Detail recod of the prenotification-AUDDIS
FKK_PRENOTE_BACS_1052     Change of business partner master data triggers prenotification entry
FKK_PRENOTE_CREATE     Create new prenotification table entries
FKK_PRENOTE_CREATE_INT     Internal use only: Create new prenotification table entries
FKK_PRENOTE_GET_NR_DATA     Get data from prenote return lot processing
FKK_PRENOTE_NR_RESEND_ACTIVE     Prenotification: resend active prenote in DFKKPNBKA
FKK_PRENOTE_PBS_00     prenotification: Format specific sorting of data
FKK_PRENOTE_PBS_1025     Change of contract account master data triggers prenotification entry
FKK_PRENOTE_PBS_1052     Change of business partner master data triggers prenotification entry
FKK_PRENOTE_SAMPLE_00     prenotification: Format specific sorting of data
FKK_PRENOTE_SET_NR_DATA     Set data from prenote return lot processing
FKK_US_ACH_0610     Event 0610: payment block due to prenotification status

Dear Experts,
I know the initial settings during withholding tax. In category we choose either invoice or payments.
I created 2 tax code one having Invoice category and in other tax code category is payment.
After that in BP master data for a vendor I have chooses both tax code but in
A/P invoice when I open Withholding Tax table it is showing only 1 tax code having category invoice.
I need to know why?
in A/R invoice it is showing both tax code for customer.
Thanks
Annu

Photoshop CS5 crashes during batch process

Hi,
I got about 100 pictures. Trying to: resize+save for web...
Photoshop converts few files and...crashes.
I presume that's a configuration problem - neither scratch disk nor memory should not be the cause although here are some parameters:
My mac:
Mac OS X (10.6.4)
2.53 GHz Intel Core 2 Duo
4GB 1067 MHz DDR3
HDD 320 GB (289 free space)
Pictures res: 5616x3744px
Picture format: .jpg
Has anyone solved problem like this (or similar)?

I have the same problem, cs5 crashes when I start batching files (raw to jpg save in my case). Sometimes after 10 sometime after 200... it's really weird. And yes it does close the files with the action I use... The crashes are really bad as it does something like a shut down which closes all programms, this also prevents crash report to open! It crashes also when I do a batching on opened files. I installed all updates and everthing, even reinstalled the programm, still the same problem :(. I still have cs4 on my mac and there batching works perfectly fine without any problems! Also for anything else cs5 works perfectly well, only batching causes me headaches.

Batch processing audio for separate video clips?

Hi there, new to the forums. I have roughly 100 separate video clips that either I have edited and exported out of PPro or collected from other outside sources. The video clips were recorded in a wide range of environments, producing widely varied audio levels and sound quality. The videos are for a blog.
I am hoping to create a batch process preset in Premiere Pro or Audition to normalize the audio in all of the video clips. My goal is to have the audio play back at the same volume level in all of them without having to edit the audio individually in each clip. I have been searching the forums for a while for help with a batch process solution like this. Running CS6 so have full access to all Adobe apps.
I have played around with running the clip audio through batch processing in Adobe Audition CS6. Haven't had any success thus far -- the audio doesn't save within the same video file it was pulled into Audition from. I really would like to normalize the audio without having to re-import/-re-export each separate video.
PPro group might be the wrong place to start, but figured I would start here. Is there a missing manual out there for doing something that seems relatively simple?

Premiere Pro can't do this. If Audition can't either, then you're probably stuck doing it manually. Or at least, using non-Adobe software. Possibly VirtualDub, depending on your source media.

Batch Process "save as" problem

Strange things are happening during the batch process save as function.
I have a set of actions i need to run on a couple of hundred jpegs, they simply need a lens correction, auto colour and auto contrast, then need saving as tiffs, all works fine when i record the action, but when i run it on a folder full of jpegs, the tiffs are huge! original jpegs are around 5mb and the tiffs are 30mb, if i apply the save as to a file individually it seems fine (file size around 2mb)
In the save as section i have specified jpeg compression at a quality of 8, but it seems to miss this in the batch process, am i missing something?
Running CS6 on OSX 10.7.5

What Script? You spoke of Actions previously.
And using Save As in Batch processing can be problematic.
Maybe Image Processor (or Image Processor Pro) might help to avoid having to include that in the Action.
But why tiff if you are going to apply the same destructive compression as a straight jpg?

PSE9: prompted for "save as" during batch processing??

Similar Messages

Maybe you are looking for