Pt880 & 2.4A with 2 x PC3200 in DC = no boot

Just wanted to ask if anyone has their 2.4A Prescott & MSI PT880 neo lsr combo working in dual channel mode with PC3200 ram?
Does this mobo even support PC3200 memory combined with a 533 FSB prosessor?
Previously I only had 1 512MB stick of Kingston Valueram in my system, no after adding another 512MB my machine instantly bluescreens in windows. With overclocked settings of (167 FSB/3GHz), it even fails to boot.
However everything works fine if I put the memories in slots 1 and 2, forcing single channel.
My system:
MSI PT880 Neo-LSR 1.7 bios
Intel Pentium 4 2.4 Prescott 533MHz
1024MB Kingston PC3200
Radeon 9800 Pro 128MB
Fortron 300W PSU
Samsung 80GB p-ata HDD

Set Top Performance to disabled in bios. Boots and works fine now.

Similar Messages

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

Im stuck with this message "no bootable device, insert boot disk and press any key". Now i want to go back to mac os but everytime i turn on my laptop that message appear..kindly help... Please

Im stuck with this message "no bootable device, insert boot disk and press any key". Now i want to go back to mac os but everytime i turn on my laptop that message appear..kindly help... Please .... Im using my usb as bootable device but it cant be detected..

Reboot, hold the option key down, select OSX when the startup manager appears.

My i phone 3gs was hang with the apple logo and its not booting

my i phone 3gs was hang with the apple logo and its not booting can any one say me how to fix this .

my phone is blinking with the apple logo and will not start

I have a PowerBook 145B but something is wrong with the systemfolder so it wont boot. I've downloaded System 7.0.1 from Apple and put it on Floppys with my Macintosh Classic. The PowerBook boots from the floppy, after a minute its just white. What to do?

I have a PowerBook 145B but something is wrong with the systemfolder so it wont boot. I've downloaded System 7.0.1 from Apple and put it on Floppys with my Macintosh Classic. The PowerBook boots from the floppy but after a minute it just comes up a window thats completely white.
I've tried a lot of things, but my Macintosh classic (with original floppys) runs 7.0.0. And the PowerBook needs atleast 7.0.1 and did run 7.1.0 as original OS.
How do I fix this?

Because your PowerBook 145B shipped with OS 7.1, it can't run an earlier version of the Mac OS, such as 7.0.1. Unfortunately, Apple never made OS 7.1 available for download. You can run OS 7.5.1, 7.5.3, and 7.5.5 on your PowerBook, but I'd recommend doing so with the maximum amount of supported memory - 8 MBs. The 19-part download of OS 7.5.3 is segmented, so that each one will fit on a 1.44 MB floppy disk. The problem is that the 19-diskette set isn't an installer set as such, having no bootable disk. It's solely intended to be used to transfer the individual segments to the resident hard drive in the computer. Once that's done, double-clicking the first .smi segment creates the OS 7.5.3 installer disk image on the desktop, which you drag onto the hard drive icon. This produces a folder with the OS 7.5.3 installer in it. I've done this before with an old Mac LC and it works. You can also download the 3-diskette OS 7.5.5 Update and run that. These downloads can be found on the same page where you found the OS 7.0.1 download: Older Software Downloads.

I am using MAC OSX 10.9.4 and LR5 Ver 5.6. I can't drag LR to my second screen. It's always worked before. All of my other apps drag to the second screen with no issues. I've re-booted my computer and it did't help. Any ideas???

I am using MAC OSX 10.9.4 and LR5 Ver 5.6. I can't drag LR to my second screen. It's always worked before. All of my other apps drag to the second screen with no issues. I've re-booted my computer and it did't help. Any ideas???

Make sure you are not in one of the full screen modes.
Window > Screen Mode > Normal
Can you see the "Traffic Lights" at the top left of the Lightroom window?

Hi, can iMovie give pronlems during the boot process from my iMac Mine. I have often after working with iMovie that i get during the boot Psi SDXH pause so the boot process stops

hi,
can iMovie give problems during the boot process from my iMac Mini?
I have often, after working with iMovie that i get during the boot Psi SDXH pause
so the boot process stops at this point
I have often reinstall OSX Mavericks
regards,
HenkfromWinterswijk
Netherlands

Hello Federico,
Your EliteBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

No. There is no other location. Be patient. Read the posts in the Bootcamp Forum. There are hundreds of posts about your issue and what to do. https://discussions.apple.com/community/windows_software/boot_camp

I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
Here is the longer version I've been compiling:
Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
http://support.apple.com/kb/HT5446
Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
I have sourced some additional information here:
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report > Serial ATA and the drives should show up as discrete drives with their info listed separately.

My MBP crashes with diagonal video issues, and will only boot in Safe Mode. Now what?

My 17" MBP (2007, 2.33 mHz) crashed the other night as I was trying to copy some music off a friend's iPod. Now, on boot, it will show the gray Apple logo, then clear the screen, but never go farther (and the fan starts up a terriific rumble after a few minutes). It is also showing distorted diagonal lines across the display.
Things I've found:
* It won't boot to the OSX Leopard DVD, just spins, and spits out the Snow Leopard DVD
* If I put it in FW Target mode it will mount on my iMac, but the FW 800 port is so skitchy/loose it loses connection eventually
* If I boot it in safe mode, everything works--no video distortion, can connect to a USB drive, which I did to back up the entire contents, and I can mount the Leopard DVD
* During that backup (using Chronosync), no disk errors except for an Aperture library failure.
I'm not sure what to do next. Boot to the Leopard DVD via safe mode to renistall the system, hoping that it'll work after it restarts? If I were in OS9 I'd be using extension manager to turn features on and off to see what's crashing, but it doesn't look like I have that capability with Safe Boot.
Any thoughts would be welcome, let me know of any other info you need.
Thanks!
Oh, two other things: I ran disk utility and repaired permissions, didn't fix the problem. And I don't have one of the video cards from that era that was covered by Apple even after warranty, one of the first things I checked
Message was edited by: Paulza

http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht3964

Starting with kernel 3.14 computer resets on boot up.

when arch switched to the 3.13 kernel my computer appears to boot normally then just resets, shuts off and starts rebooting again. Happens still with 3.14 kernel. I have been using lts kernel but that switched to 3.14 just in the last few days. Side note, I really feel that switching the lts kernel from 3.10 to 3.14 is newsworthy.
Anywho, the last thing i notice on the screen is "Automounting fs on demand" or something and something about rfkill.
i removed one of my ssd and one of my gfx cards with same results so i doubt it's a power issue.
Tell me what to do!
Thank you in advance.
You guys have gotten me thru plenty of scrapes in the past.
Here is my boot log http://pastebin.com/1CcFULUr
Last edited by skinney6 (2014-07-09 02:39:27)

skinney6 wrote:
There are the linux-lts310 and linux-lts312 packages available in the AUR if you feel you have to stay with one of those branches.
if i wanted to build again with a custom config do i replace config or config.x86_64?
I am running x86_64 system.
You're welcome!
It's probably best to set the _makenconfig= to _makenconfig=y in the PKGBUILD and play around with that to build a custom config (and then unset _makenconfig= after the build if your happy). That'll kick out a nicely created config.x86_64.last file which you can rename to config.x86_64 if you want to use it for future builds.

I had to erase and reinstall mavericks to hd, now i cannot boot up , i get a folder with flashing Q mark and i cannot boot from dvd drive...Ideas please

hi
its a long and sorry story, i have a imac running mavericks
a few days ago i noticed that the dvd drive was ejecting every disc i put in, so i decide to check hd with onyx and reset permissions etc
onyx said the smart status couldnt be checked and i should check hd using disk utility.
i did this and it came up that hd had errors , so i ran the repair facility....it came up with disk can not be repaired, reformat and reinstall mavericks
this i did.
i reinstalled mavericks into mac hd, which took about 3 hrs, i then rebooted and a folder with flashing Qmark appeared, i cant get past this at all.
i have tried to use internet recovery but it comes up with 6002f error, and the dvd drive still does not accept boot disk, so i am at a lose as to how to proceed
anybody got any ideas?
thanks
L

If your hard drive has SMART errors then it is failing and should be replaced. Disk Utility cannot fix SMART reported errors.

Yosemite installed on iMac purchased with Mavericks now takes 2 minutes to boot and give the login screen.

Downloaded and installed os x yosemite on iMac that was purchased originally with Mavericks. When power button is pressed I get start up audio tone and then the the black screen with the white apple symbol with the progression bar. The bar moves very slowly two about one third and then the mouse cursor appears and there it stalls for around two minutes. After the wait the login screen appears and it operates normally. This whole process before update would only take maybe 30 seconds.
If I try the web recovery process it will revert back to Mavericks any suggestions on what this might be. I do have an external Mac passport pro external drive that does have time machine enabled and has been there for months.
Thanks

After spending a number of hours with Apple Care personnel I was connected with a supervisor and finally got the iMac to boot up on every attempt and in a reasonable amount of time. Login screen now comes on in 30 to 40 seconds and computer is usable within a total time of 1 minute to 1minute 30 seconds.
Here was the process. Tried to download whole operating system with reinstall from utilities menu at power on and at 7 hours progress bar stalled at one third the way. Reason, time machine external hard drive was still connected during process. Disconnected all external connections except power and tried download again. This time whole operating system downloaded in 15 to 20 minutes. Yosemite installed and rebooted automatically and booted to login screen, signed in then to desktop, but boot took around five minutes. Shutdown and connected all peripherals, i.e.. ext. HD, DVD, printers and tried to start. iMac stalled at 2 minutes into progression bar with white apple symbol before login screen. Removed peripherals and tried again and still stalled and would not boot.
What was done to correct is as follows. Started iMac in Safe Mode, cleared all items in cache from Macintosh HD/Library folder and System /Library folder, system start up items, launch agents, and launch daemons contents cleared, removed printers in system preferences, ran disk utilities verify and repair of disk and disk permissions. Shutdown and removed power from iMac. With no peripherals system then booted normally. Reconnected peripherals while iMac was still on and added printers back to system preferences and all is well.
So it seems only reasonable that the downloading problem was hindered by the time machine external hard drive, to which an Apple rep. agreed and the extremely slow boot up or stalled boot up was caused by items in the start up and launch folders. I will state here that I was using my ISP's anti virus software for the Mac which was in the launch folders and most likely was causing the boot up problems.

HT1212 screen is blank with the apple logo. Will not boot up after downloading the latest software. Any suggestions?

screen is blank with apple logo after downloading new ios 7. Any suggestions?

Hi, ronia90.
Thank you for visiting Apple Support Communities.
I would first try a reset of the device. To reset a device, press and hold both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears. You may need to attempt this multiple times.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, you may need to attempt a restore on the device via forced recovery.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
Jason H.

TS2570 Upon consulting osx daily website i erased a a 4gb file in private folder which is something to do with RAM and now i can,t boot up. I,ve tried to do numerous types of boots like holding c and trying to reinstall my original cd with snow leopard on

If i try d utility the areas i need like verify or repair etc are dimmed out. If i tryand reinstall it asks me which startup disk i,d like to boot from and there are no disks to choose from. Please help. P.s. im not fussed about wiping the existing m lion os and programs and starting from scratch if that what it takes.

WZZZ wrote:
I was under the impression that absolutely everything was retained.
Some third party software installs at boot kernel extension files that load when OS X boots, if there is a problem with these one usually gets the famous gray spinning wheel of death (also can be white or blue screen).
You can see what you have by pasting this line in Terminal
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Since the folder holding these is ~/System/Library/Extensions, when OS X is reinstalled those third party kext files are obviously not included, requiring those softwares to be reinstalled from original sources to put theirs back in there.
The #8 Reinstall OS X has the benefit of fixing OS X if it's the issue, removing all third party kext files, including outdated and no longer used ones, as well as replacing all bundled Apple software that comes with OS X (not including iLife).
When this is done with 10.6, the old version of 10.6 is installed, why it's important to Software Update right away for security and bug fixes.
On 10.7-10.8 now I assume the download is the most recent version of OS X as that would make sense.

Pt880 & 2.4A with 2 x PC3200 in DC = no boot

Similar Messages

Maybe you are looking for