Publish Captivate 4 module for Sum total
Hello everyone. I have two training modules that are not scored. They are demonstrations, not simulations. I need to publish them so that they can be added to a customers Sum Total LMS. What settings should I use when publishing to LMS? And any tips or tricks I should know? I do not have access to the LMS. For our training, we host our own internal web pages.
Thanks
Hi,
Thanks for the tips. I read some of the suggested resources, and created a click box on the last slide with click box settings as:
On Success --> Execute Javascript --> javascript:window.close()
... and Reporting settings as:
Include in Quiz (checked)
Report answers (unchecked)
Points = 1
Add to Total (checked)
The LMS system accurately flags the course complete, but the click action does not close / exit the module. This is a SCORM 1.2 module.
Any ideas? Is it possible to test this in HTML outside the LMS system, or am I forced to test this in the LMS system?
Thanks,
Henry
Similar Messages
-
Stopping Sum Total completed activity popup
1st time posting and new user of Adobe Captivate 5. Hoping to find some help.
Here is my scenario.
I have a Power Point presentation that I have brought into captivate 5.
The steps I need to accomplish are
1) Disable the SumTotal player (done through edit of Manifest.xml file.
2 Have user page through all slides to end.
3) Captivate send a completion to LMS
Here is my problem. As soon as user enters last slide Sum total pops up the "You have completed the activity. Click OK to close the player." button right in the middle of the slide forcing the user to move it to finish reading the slide and then they would need to click OK to close thus generating a completion status in the LMS.
My publish settings are
Quiz enabled
LMS standard SCORM Template default (have also tried the Captivate 4 template i found)
Manifest version 1.2
Mastery Score 100
Reporting Status Complete/Incomplete
Report to LMS Percent
Chose Report Data Slide Views Only Slide Completion 100
Reporting Level Report Score
LMS Customerization Settings
Never Send Resume Data checked.
I really just need the Sum Total box to appear after the last slide or at least set it so that I can control a set time that it appears.
ThanksWhenever I hear someone having issues getting an LMS to work with Complete/Incomplete, suggest they try using Pass/Fail instead. Call me cynical, but I've seen so many people have problems with getting it to work reliably that I've grown to be very distrustful of Complete/Incomplete as a solution for LMS tracking.
Also, try testing what happens if you add a scored button on that last slide which the user must click to indicate they've completed the module. See if adding such an interactive object to the last slide will delay the appearance of that nuisance Sum Total dialog.
I wish I could get hold of a trial or developer setup for Sum Total and run it on my development machine. Too many people report issues with getting Captivate to work reliably in Sum Total, yet Captivate content seems to work fine for most other LMSs. I find this intriguing. -
Uploading Linked Captivate 2 Projects into Sum Total LMS
I've been trying to upload a series of media-rich linked
projects to our Sum Total LMS. Although there are several projects,
they are linked to play seamlessly to the end user. The problem is
when each project is published, it creates its own zip file. In
order to upload the files to the LMS they must be in one zip file
or they will upload as separate, independent learning modules. I've
encountered numerous challenges in attempting the upload.
Does anyone have any experience/suggestions about:
- Publishing each project into the same zip file
- Uploading linked Captivate 2 projects to an LMS, especially
the Sum Total LMS
- Uploading a project with flash videos to an LMS
I greatly appreciate any feedback you can provide.
Thanks!I always link between Captivate files to ensure that my files
are not too big. I have done this many times; however, I have not
tried it when there is a quiz involved. What I do is link them
inside Captivate, publish the files (non-zipped, which you can do
if there isn't a quiz involved) and then zip them up together with
Winzip. When you load it into the LMS, you need to choose either
"Knowledge Document" or "General Document" and there, you can
choose the launch file (whatever file you want to load
first.) -
How to publish Captivate (swf) projects for free
Hi Cap Users,
This is not really a question, more of a handy tip.
When I first started using Captivate I tried to find places where I could publish my projects for free. I've also seen lots of posts by instructional designers and students who want to get their projects 'out there' for little or no cost.
Here's a short vid that shows you how to publish .swf projects via Weebly.com. You'll need to create a weebly website first. It's all free and the the site builder elements are drag and drop, so you can have a simple site in place within minutes.
Weebly isn't set up for HTML5 as yet, but I'm sure that won't be far away.
Click this link to see a demonstration - saving your Cap file, uploading and publishing it.
Happy publishing!Ok, then I Publish the folio in folio producer like Public and Free and that's all, it's ok? Then when I want to sell this folio, back to the folio producer, change to Public and Minorist and in the Android Market build the in-app product, it's ok?
PD: sorry for my english -
Function module to find total for delivey for delivery no.
is there any function module to find total price for delivery no.
If you want to add tax, ... conditions, you could try to read conditions (good luck).
here it's a sample code for sales order (the table are different, but the function the same)
DATA : is_vbak TYPE vbak ,
is_vbap TYPE vbap .
* Check if the sales order exist.
SELECT SINGLE *
INTO is_vbak
FROM vbak
WHERE vbeln EQ vbeln.
IF sy-subrc NE space.
RAISE sales_order_unknown.
ENDIF.
* Check if the sales order item exist.
SELECT SINGLE *
INTO is_vbap
FROM vbap
WHERE vbeln EQ vbeln
AND posnr EQ posnr.
IF sy-subrc NE space.
RAISE sales_order_item_unknown.
ENDIF.
* Set data.
MOVE : is_vbak-mandt TO isg_komk-mandt ,
is_vbak-kalsm TO isg_komk-kalsm ,
is_vbak-fkara TO isg_komk-fkart ,
'V' TO isg_komk-kappl ,
is_vbak-waerk TO isg_komk-waerk ,
is_vbak-knumv TO isg_komk-knumv ,
is_vbak-vbtyp TO isg_komk-vbtyp ,
is_vbak-bukrs_vf TO isg_komk-bukrs ,
is_vbak-vbeln TO isg_komk-belnr ,
is_vbap-posnr TO isg_komp-kposn .
MOVE-CORRESPONDING : is_vbak TO isg_komk ,
is_vbap TO isg_komp.
* Get the KOMV table.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = isg_komk
comm_item_i = isg_komp
TABLES
tkomv = itg_komv
tkomvd = itg_komvd.
* Get the 'Marge'.
CALL FUNCTION 'PRICING_BUILD_XKOMV'
EXPORTING
i_komk = isg_komk
i_komp = isg_komp
calculation_type = 'E'
TABLES
tkomv = itg_komv
e_xkomv = itg_komv2
EXCEPTIONS
OTHERS = 2. -
Best Practice tips for publishing Captivate 8 project?
Does anyone have any Best Practice Tips for publishing Captivate 8 projects? Is HTML5/Flash the most universal?
We will begin testing/training before our LMS is functional.
We have no shared network capability or SharePoint type platform. Project is too large for e-mail even when zipped.
I am thinking that we will have to use thumb drive/CD along those lines.Hi There ,
Please refer to the below links :-
Adobe Captivate Help | Preview and publish Responsive projects
Adobe Captivate Help | Publish projects as HTML5 files
Adobe Captivate * Publishing Projects
Regards ,
Ajit -
Captivate 6 publishing to HTML5 for Android 4.1
Now that Android has officially dropped support for Flash with version 4.1 (aka "Jellybean"), does anyone see hope for Adobe making improvements in the ability for Captivate 6 to publish HTML5 files for the Android environment, that run properly (including sound)?
I have tested a variety of HTML5 capable browsers, and most fail in delivering audio. This included Chrome, Firebox, Opera, and others. The best one I have found, in terms of working with the HTML5 Captivate content, is Dolphin combined with Dolphin JetPack.
This is very disappointing. The Android industry is closing the Flash door, yet Adobe has not responded with fixes to HTML5 output in response.Hi All,
I have come up with solution .
re-direct firefox using js to other location & for IE/safari/Chrome to original content unmodified
Step 1) convert all audio files from .mp3 found in folder named "ar" to .ogg and place in the same folder
Step2) "Project.js" rename all the audio files named as .mp3 to .ogg
example : open "Projects.js" using any text editor then rename all .mp3 to .ogg
1923.mp3 find using Ctrl+f rename to 1923.ogg rename all audio files to ogg
Step3) find folder "asserts" find "js" open "CPHTML5Warnings.js" using your favourite text editor
Add the folowing line so that Error message is not displayed
this.BrowserEnum.FIREFOX_MIN_SUPPORTED_VERSION = xx;
after the line
this.BrowserEnum.SAFARI_MIN_SUPPORTED_VERSION = 5.1;
Under "//Check for browser Compatibility"
find this lines first
if((this.browser == this.BrowserEnum.MSIE) && (this.browserVersion >= this.BrowserEnum.MSIE_MIN_SUPPORTED_VERSION ))
lSupported = true;
add these lines
else if((this.browser == this.BrowserEnum.FIREFOX) && (this.browserVersion >= this.BrowserEnum.FIREFOX_MIN_SUPPORTED_VERSION ))
lSupported = true;
Save, Your are allset you can play html5 on FIREFIOX on antroid devise ,tested -
Any method to create a SUM Total for a column whose values based on LAG?
I have a question here, and the challenge is to explain my situation well. I am trying to develop a workbook that shows by project and month, the cost this period and the change in cost from the prior period. I want a SUM total on the Cost This Period and Cost Change From Prior Mth columns. So what I want to do looks something like this -
Project Month Cost This Period Cost Chg from Prior Mth
ABCDE Jan $50,000 NULL (since no preceeding row)
ABCDE Feb $75,000 $25,000
ABCDE Mar $60,000 -15,000
Total $185,000 $10,000
I do the Cost Chg from Prior Mth as a new calculation, and use the Insert Formula from Template process to use the F(x) Difference template to create my calculation. That is working just great. If you look at the underlying code for this new column, you can see the LAG function being utilized in calculating this value. I am lagging one row, as you can see from the example above.
I can create a new total and do a SUM for the Cost This Period column and get the correct answer (the $185,000).
The problem I am running into is that I am not getting anything when I try to sum my Cost Chg from Prior Mth column. The result is just blank (does print the total's text, but no amount).
My thought is that the NULL row in this column was messing up the SUM from working. So I created a new calculation and said CASE WHEN Cost Chg from Prior Mth IS NULL THEN 0.00 ELSE Cost Chg from Prior Mth. So I get a new column with the same numbers except for the first row, where I now have a 0 instead of NULL. I then created a new total (SUM function) on this brand new column. Darn. Same result as for the other column. I do not get an amount.
Has anyone else run into an issue with trying to sum up a column of numbers that are being calculated from a LAG function in Discoverer? Any suggestions on how I could get a SUM to properly calculate for this Cost Chg from Prior Mth column? Or have I run across one of those irritating "cannot handle in Discoverer" issues?
Of course I can export the workbook run results to Excel and create the calculation in there, and that works just fine.
John DickeyHi John
Thanks for the question and the great information. That really helped. I love these kinds of questions. They make me think :-)
Just a thought but have you tried altering the SUM to be a CELL SUM?
The SUM will try to evaluate the LAG over the total which would be invalid whereas, at least in theory, the CELL SUM should literally add the values.
Best wishes
Michael -
Looking for independent contractors to help produce Captivate Modules
Realty Pro Academy is looking for independent contractors to help produce Captivate Modules from Power Point.
The candidate must be detail oriented, be able to produce to specification and have proven ability to meet deadlines.
This position is a 1099 position, and is able to be done remotely. The pay is project based, and is contingent upon project submission acceptance.
If you are interested, please send your resume to [email protected]
Bruce Brown
Presidenthello Maxwell ,
hhave a look at tcode BAPI , under MM application area.... u will get all BAPIs related to MM modules.
Identify if a quotation number exists in the system which a specific sales organization.
Determine the sale price of a material for a specific customer-->u need to ask your functional consultant , may be he is creating info record for that one?
A simplier way to identify the plant specific status of a material without using the MATERIALGETALL-->use table MARC
Identify if a specific customer used a supplied purchase order before.
Identify if a customer has been placed on credit hold-->i think u can make use of tcode vkm4 or custome master data will have all these info.
regards
Prabhu -
Total Score in Sum Total not correct
We are using Captivate 4 and the Sum Total LMS. Our course consists of 2 lessons which are not scored and an assessment which is scored. The settings for the lessons are Slide Views Only so the lessons have the Topic Status Complete or Incomplete on the Sum Total LMS Learning Activity Progress Detail page, with the Score % blank. The assessment also has Topic Status Complete or Incomplete, and also a Score % (80% required to pass). The Topic Status and Score % values are correct for the lessons and the assessment, however the Total Score is not correct. When the user completes the 2 lessons and the assessment with a score of 100%, the Total Score shows as only 33%. So it seems that Sum Total is including the lessons in the Total Score, and calculating the Total Score by (100+0=0)/3 = 33%, i.e. assigning 0% to the lessons even though the Score % is blank for the lessons.
Is there a way to have the Total Score be just for the assessment? If the user scores 100% on the assessment we would like the Total Score to be 100%.Hi,
Can you make your question more clear, it is not clear what is you requirement exactly.
'.Total stock not issued from gate in stock.' : Yuou mean to say GR made with 103 but 105 not done for that
or Total stock in store but not issued yet ) : there is no GI with any movemen type ??
regards,
zafar -
Function module for assigned wage types
Hi experts,
We need wage type wise count and sum of the amount for each wage type defined in infotype '0008' for the given from and to dates. Is there any function module available for the same.
Please suggest.
Regards,
Kaustubh Kabre.Hi,
<li>I do not look for function module for this case as i know that we can or have to read wage types and corresponding amount in the program. LDB PNP should be given in program attributes.
REPORT RPABAP06.
TABLES:PERNR.
INFOTYPES:0008.
DATA: BEGIN OF WAGETYPES,
LGA LIKE P0008-LGA01,
BET LIKE P0008-BET01,
ANZ LIKE P0008-ANZ01,
EIN LIKE P0008-EIN01,
OPK LIKE P0008-OPK01,
END OF WAGETYPES.
DATA:total type P0008-BET01.
GET PERNR.
RP_PROVIDE_FROM_LAST P0008 SPACE PN-BEGDA PN-ENDDA.
DO 20 TIMES VARYING WAGETYPES-LGA FROM P0008-LGA01 NEXT P0008-LGA02
VARYING WAGETYPES-BET FROM P0008-BET01 NEXT P0008-BET02.
IF WAGETYPES-LGA IS INITIAL.
EXIT.
ELSE.
TOTAL = TOTAL + WAGETYPES-BET.
WRITE: / WAGETYPES-LGA, WAGETYPES-BET.
ENDIF.
ENDDO.
WRITE TOTAL.
Thanks
Venkat.O -
Hi all,
Is there any Z function modules for OLE, which will download the data directly to Excel with 2 sheets.
Regards,
ShaliniHi Shalini Reddy
there is no FM but code is there... u can see...
*& Report YOLE_FOR_EXCEL
REPORT yole_for_excel.
*REPORT ZTEST_BYW.
OLE specific include file
INCLUDE ole2incl.
INCLUDE excel__c.
data definitions of OLE objects with type ole2_object
PARAMETERS: p_filenm(80) LOWER CASE OBLIGATORY
DEFAULT 'd:\temp\report_tsl.xls'.
DATA: g_tmp_workbook TYPE ole2_object.
DATA: g_tmp_worksheets TYPE ole2_object.
DATA: g_tmp_worksheet1 TYPE ole2_object.
DATA: g_tmp_worksheet2 TYPE ole2_object.
DATA: g_pc_template LIKE rcgfiletr-ftappl
VALUE 'd:\temp\mmr_rpt_tsl_tmp.xls'.
DATA: g_excel TYPE ole2_object.
DATA: g_workbooks TYPE ole2_object.
DATA: g_workbook TYPE ole2_object.
DATA: g_worksheets TYPE ole2_object.
DATA: g_worksheet TYPE ole2_object.
DATA: g_cell TYPE ole2_object.
DATA: g_cell1 TYPE ole2_object.
DATA: g_cell2 TYPE ole2_object.
DATA: g_cellrange TYPE ole2_object.
DATA: g_font TYPE ole2_object.
DATA: g_interior TYPE ole2_object.
DATA: g_borders TYPE ole2_object.
DATA: g_first_ws VALUE 'Y'.
DATA: g_row TYPE i.
DATA: g_col TYPE i.
definition of loop counter
DATA: i TYPE i VALUE '5'.
DATA: BEGIN OF t_sheet1 OCCURS 1,
col1(10),
col2(20),
END OF t_sheet1.
DATA: BEGIN OF t_sheet2 OCCURS 1,
col1(10),
col2(20),
END OF t_sheet2.
START-OF-SELECTION.
PERFORM prepare_data.
PERFORM download_to_excel.
END-OF-SELECTION.
call method of excel 'QUIT'.
it is now possible to leave the EXCEL application
remark: you have to go to the EXCEL application and answer the
popup dialog screen
*& Form PREPARE_DATA
FORM prepare_data.
t_sheet1-col1 = 'A1'.
t_sheet1-col2 = 'A2'.
APPEND t_sheet1.
t_sheet1-col1 = 'B1'.
t_sheet1-col2 = 'B2'.
APPEND t_sheet1.
t_sheet2-col1 = 'Y1'.
t_sheet2-col2 = 'Y2'.
APPEND t_sheet2.
t_sheet2-col1 = 'Z1'.
t_sheet2-col2 = 'Z2'.
APPEND t_sheet2.
ENDFORM. " PREPARE_DATA
*& Form DOWNLOAD_TO_EXCEL
FORM download_to_excel.
PERFORM open_excel.
PERFORM add_worksheet1.
PERFORM add_worksheet2.
PERFORM open_template_file.
PERFORM close_excel.
WRITE: / 'End of program'.
ENDFORM. " DOWNLOAD_TO_EXCEL
*& Form FILL_CELL
*& FORM routine, which fills the specified cell in the EXCEL sheet
*& with the given value
FORM fill_cell USING i_row TYPE i
i_col TYPE i
i_value
i_fontbold
i_digit
i_wraptext
i_horizon_align
i_vertical_align.
DATA: l_str TYPE string.
CALL METHOD OF g_excel 'CELLS' = g_cell
EXPORTING #1 = i_row
#2 = i_col.
SET PROPERTY OF g_cell 'VALUE' = i_value.
IF i_fontbold = 'X'.
GET PROPERTY OF g_cell 'Font' = g_font.
SET PROPERTY OF g_font 'Bold' = 1.
ENDIF.
IF NOT i_wraptext IS INITIAL.
SET PROPERTY OF g_cell 'WrapText' = 1.
ENDIF.
IF NOT i_horizon_align IS INITIAL.
IF i_horizon_align = 'L'.
SET PROPERTY OF g_cell 'HorizontalAlignment' = xlleft.
ELSEIF i_horizon_align = 'R'.
SET PROPERTY OF g_cell 'HorizontalAlignment' = xlright.
ELSEIF i_horizon_align = 'C'.
SET PROPERTY OF g_cell 'HorizontalAlignment' = xlcenter.
ENDIF.
ENDIF.
IF NOT i_vertical_align IS INITIAL.
IF i_vertical_align = 'T'.
SET PROPERTY OF g_cell 'VerticalAlignment' = xltop.
ELSEIF i_vertical_align = 'B'.
SET PROPERTY OF g_cell 'VerticalAlignment' = xlbottom.
ELSEIF i_vertical_align = 'C'.
SET PROPERTY OF g_cell 'VerticalAlignment' = xlcenter.
ENDIF.
ENDIF.
To set number format for cell
IF i_digit <> ''.
IF i_value IS INITIAL AND i_digit <> '%'.
SET PROPERTY OF g_cell 'VALUE' = ''.
ELSE.
Set number format for cell with number
IF i_digit = '1'.
SET PROPERTY OF g_cell 'NumberFormat' = '#,###.0 '.
ELSEIF i_digit = '2'.
SET PROPERTY OF g_cell 'NumberFormat' = '#,##0.00 '.
ELSEIF i_digit = '%'.
SET PROPERTY OF g_cell 'NumberFormat' = '#,##0.00% '.
ELSE.
SET PROPERTY OF g_cell 'NumberFormat' = '#,### '.
ENDIF.
ENDIF.
ENDIF.
ADD 1 TO i_col.
ENDFORM. "FILL_CELL
*& Form OPEN_EXCEL
FORM open_excel.
DATA: l_cnt TYPE i.
create object excel of OLE class 'EXCEL.APPLICATION'
CREATE OBJECT g_excel 'EXCEL.APPLICATION'.
CALL METHOD OF g_excel 'WORKBOOKS' = g_workbooks.
CALL METHOD OF g_workbooks 'ADD' = g_workbook.
GET PROPERTY OF g_workbook 'Worksheets' = g_worksheets.
GET PROPERTY OF g_excel 'ACTIVESHEET' = g_worksheet.
SET PROPERTY OF g_excel 'DISPLAYALERTS' = 0.
GET PROPERTY OF g_worksheets 'Count' = l_cnt.
l_cnt = l_cnt - 1.
Delete unwanted worksheets
DO l_cnt TIMES.
GET PROPERTY OF g_excel 'ACTIVESHEET' = g_worksheet.
CALL METHOD OF g_worksheet 'DELETE'.
ENDDO.
ENDFORM. " OPEN_EXCEL
*& Form CLOSE_EXCEL
FORM close_excel.
SET PROPERTY OF g_excel 'VISIBLE' = 1.
CALL METHOD OF g_workbook 'SAVEAS'
EXPORTING #1 = p_filenm.
quit Excel and free all OLE objects
call method of g_excel 'QUIT'.
FREE OBJECT g_interior.
FREE OBJECT g_borders.
FREE OBJECT g_font.
FREE OBJECT g_cell.
FREE OBJECT g_cell1.
FREE OBJECT g_cell2.
FREE OBJECT g_cellrange.
FREE OBJECT g_excel.
FREE OBJECT g_workbooks.
FREE OBJECT g_workbook.
FREE OBJECT g_worksheets.
FREE OBJECT g_worksheet.
ENDFORM. " CLOSE_EXCEL
*& Form ADD_WORKSHEET
FORM add_worksheet USING i_name.
Add new worksheet
IF g_first_ws <> 'N'.
g_first_ws = 'N'.
GET PROPERTY OF g_excel 'ACTIVESHEET' = g_worksheet.
ELSE.
CALL METHOD OF g_worksheets 'Add' = g_worksheet.
ENDIF.
SET PROPERTY OF g_worksheet 'NAME' = i_name.
g_row = 1.
g_col = 1.
ENDFORM. " ADD_WORKSHEET
*& Form ADD_WORKSHEET1
FORM add_worksheet1.
PERFORM add_worksheet USING 'Test 1'.
fill line in EXCEL sheet with headerlines of table columns
g_col = 1.
PERFORM fill_cell USING g_row g_col 'My First Worksheet' 'X' ''
PERFORM merge_cell USING g_row 1 g_row 4.
PERFORM set_border USING g_row 1 g_row 4 4 ''.
ADD 1 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'ID'(001) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Name'(002) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Telephon'(003) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Rabatt'(004) 'X' '' '' '' ''.
loop at customr table and print values into EXCEL sheet
ADD 1 TO g_row.
LOOP AT t_sheet1.
g_col = 1.
PERFORM fill_cell USING g_row g_col t_sheet1-col1 '' '' '' '' ''.
PERFORM fill_cell USING g_row g_col t_sheet1-col2 '' '' '' '' ''.
ADD 1 TO g_row.
ENDLOOP.
g_col = 4.
PERFORM set_border USING 1 1 g_row g_col '' 4.
ENDFORM. " ADD_WORKSHEET1
*& Form ADD_WORKSHEET2
FORM add_worksheet2.
PERFORM add_worksheet USING 'Test 2'.
fill line in EXCEL sheet with headerlines of table columns
g_col = 1.
PERFORM fill_cell USING g_row g_col 'My Second Worksheet' 'X' ''
PERFORM merge_cell USING g_row 1 g_row 4.
PERFORM set_border USING g_row 1 g_row 4 1 'X'.
PERFORM set_color USING g_row 1 g_row 4 'LT'.
ADD 1 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'ID'(001) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Name'(002) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Telephon'(003) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Rabatt'(004) 'X' '' '' '' ''.
loop at customr table and print values into EXCEL sheet
ADD 1 TO g_row.
LOOP AT t_sheet2.
g_col = 1.
PERFORM fill_cell USING g_row g_col t_sheet2-col1 '' '' '' '' ''.
PERFORM fill_cell USING g_row g_col t_sheet2-col2 '' '' '' '' ''.
ADD 1 TO g_row.
ENDLOOP.
g_col = 4.
PERFORM set_border USING 1 1 g_row g_col 2 'X'.
ADD 4 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'This is a wrap text' 'X' ''
'X' 'C' 'T'.
PERFORM fill_cell USING g_row g_col 'Vertical - Bottom' 'X' ''
'' 'L' 'T'.
ADD 4 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'Amount 1' 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col '100.04' '' 'X' '' '' ''.
ADD 1 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'Amount 2' 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col '200.01' '' 'X' '' '' ''.
ADD 1 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'Total' 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col '=SUM(B13:B14)' 'X' 'X' '' '' ''.
PERFORM fill_cell USING g_row g_col '0.00' 'X' 'X' '' '' ''.
PERFORM copy_cell USING g_row 2 17 5 25 8.
ENDFORm. " ADD_WORKSHEET2
*& Form MERGE_CELL
FORM merge_cell USING i_row1 i_col1
i_row2 i_col2.
CALL METHOD OF g_excel 'Cells' = g_cell1
EXPORTING #1 = i_row1
#2 = i_col1.
CALL METHOD OF g_excel 'Cells' = g_cell2
EXPORTING #1 = i_row2
#2 = i_col2.
CALL METHOD OF g_excel 'Range' = g_cellrange
EXPORTING #1 = g_cell1
#2 = g_cell2.
CALL METHOD OF g_cellrange 'Merge'.
ENDFORM. " MERGE_CELL
*& Form SET_BORDER
FORM set_border USING i_row1 i_col1
i_row2 i_col2
i_thickness
i_allborders.
CALL METHOD OF g_excel 'Cells' = g_cell1
EXPORTING #1 = i_row1
#2 = i_col1.
CALL METHOD OF g_excel 'Cells' = g_cell2
EXPORTING #1 = i_row2
#2 = i_col2.
CALL METHOD OF g_excel 'Range' = g_cellrange
EXPORTING #1 = g_cell1
#2 = g_cell2.
IF i_allborders IS INITIAL.
CALL METHOD OF g_cellrange 'BorderAround'
EXPORTING #1 = 1 "Continuous line
#2 = i_thickness. "Thickness: 1 - Normal, 4 - Thick
ELSE.
GET PROPERTY OF g_cellrange 'Borders' = g_borders.
SET PROPERTY OF g_borders 'LineStyle' = '1'.
SET PROPERTY OF g_borders 'Weight' = i_thickness.
ENDIF.
ENDFORM. " SET_BORDER
*& Form SET_COLOR
FORM set_color USING i_row1 i_col1
i_row2 i_col2
i_color.
DATA: l_colorindex TYPE i.
CASE i_color.
WHEN 'BK'.
l_colorindex = 1. "Black
WHEN 'BR'.
l_colorindex = 53. "Brown
WHEN 'OG'.
l_colorindex = 52. "Olive Green
WHEN 'DG'.
l_colorindex = 51. "Dark Green
WHEN 'DT'.
l_colorindex = 49. "Dark Teal
WHEN 'DB'.
l_colorindex = 11. "Dark Blue
WHEN 'ID'.
l_colorindex = 55. "Indigo
WHEN 'G4'.
l_colorindex = 56. "Gray 80%
WHEN 'DR'.
l_colorindex = 9. "Dark Red
WHEN 'OR'.
l_colorindex = 46. "Orange
WHEN 'DY'.
l_colorindex = 12. "Dark Yellow
WHEN 'GR'.
l_colorindex = 10. "Green
WHEN 'TL'.
l_colorindex = 14. "Teal
WHEN 'BL'.
l_colorindex = 5. "Blue
WHEN 'BY'.
l_colorindex = 47. "Blue Gray
WHEN 'G3'.
l_colorindex = 16. "Gray 50%
WHEN 'RD'.
l_colorindex = 3. "Red
WHEN 'LO'.
l_colorindex = 45. "Light Orange
WHEN 'LI'.
l_colorindex = 43. "Lime
WHEN 'SG'.
l_colorindex = 50. "Sea Green
WHEN 'AQ'.
l_colorindex = 42. "Aqua
WHEN 'LB'.
l_colorindex = 41. "Light Blue
WHEN 'VL'.
l_colorindex = 13. "Violet
WHEN 'G2'.
l_colorindex = 48. "Gray 40%
WHEN 'PK'.
l_colorindex = 7. "Pink
WHEN 'GD'.
l_colorindex = 44. "Gold
WHEN 'YL'.
l_colorindex = 6. "Yellow
WHEN 'BG'.
l_colorindex = 4. "Bright Green
WHEN 'TQ'.
l_colorindex = 8. "Turquoise
WHEN 'SB'.
l_colorindex = 33. "Sky Blue
WHEN 'PL'.
l_colorindex = 54. "Plum
WHEN 'G1'.
l_colorindex = 15. "Gray 25%
WHEN 'RS'.
l_colorindex = 38. "Rose
WHEN 'TN'.
l_colorindex = 40. "Tan
WHEN 'LY'.
l_colorindex = 36. "Light Yellow
WHEN 'LG'.
l_colorindex = 35. "Light Green
WHEN 'LT'.
l_colorindex = 34. "Light Turquoise
WHEN 'PB'.
l_colorindex = 37. "Pale Blue
WHEN 'LV'.
l_colorindex = 39. "Lavender
WHEN 'WH'.
l_colorindex = 2. "White
WHEN OTHERS.
l_colorindex = 2. "White
ENDCASE.
CALL METHOD OF g_excel 'Cells' = g_cell1
EXPORTING #1 = i_row1
#2 = i_col1.
CALL METHOD OF g_excel 'Cells' = g_cell2
EXPORTING #1 = i_row2
#2 = i_col2.
CALL METHOD OF g_excel 'Range' = g_cellrange
EXPORTING #1 = g_cell1
#2 = g_cell2.
GET PROPERTY OF g_cellrange 'Interior' = g_interior.
SET PROPERTY OF g_interior 'ColorIndex' = l_colorindex.
ENDFORM. " SET_COLOR
*& Form COPY_CELL
FORM copy_cell USING i_crow i_ccol
i_prow1 i_pcol1
i_prow2 i_pcol2.
CALL METHOD OF g_excel 'Cells' = g_cell
EXPORTING #1 = i_crow
#2 = i_ccol.
CALL METHOD OF g_cell 'Copy'.
CALL METHOD OF g_excel 'Cells' = g_cell1
EXPORTING #1 = i_prow1
#2 = i_pcol1.
CALL METHOD OF g_excel 'Cells' = g_cell2
EXPORTING #1 = i_prow2
#2 = i_pcol2.
CALL METHOD OF g_excel 'Range' = g_cellrange
EXPORTING #1 = g_cell1
#2 = g_cell2.
CALL METHOD OF g_worksheet 'Paste'
EXPORTING #1 = g_cellrange.
ENDFORM. " COPY_CELL
*& Form OPEN_TEMPLATE_FILE
FORM open_template_file.
CALL METHOD OF g_workbooks 'Open' = g_tmp_workbook
EXPORTING #1 = g_pc_template
#2 = 2
#3 = 0
#4 = 1
#5 = 0
#6 = 0
#7 = 1.
CALL FUNCTION 'FLUSH'
EXCEPTIONS
OTHERS = 0.
GET PROPERTY OF g_tmp_workbook 'Worksheets' = g_tmp_worksheets.
GET PROPERTY OF g_tmp_worksheets 'Item' = g_tmp_worksheet1
exporting #1 = 1.
GET PROPERTY OF g_tmp_worksheets 'Item' = g_tmp_worksheet2
exporting #1 = 2.
CALL METHOD OF g_tmp_worksheet1 'Copy'
EXPORTING #1 = g_worksheet.
CALL METHOD OF g_tmp_worksheet2 'Copy'
EXPORTING #1 = g_worksheet.
call method of g_tmp_workbook 'Close'.
CALL FUNCTION 'FLUSH'
EXCEPTIONS
OTHERS = 0.
ENDFORM. " OPEN_TEMPLATE_FILE -
Captivate 6 for Mac too buggy for use (screen corruption, mouse/audio instability)
Corrupt Screens. The main problem is corrupt screens (visually jumbled, with elements of previous screens). The corrupt screens appear in both Preview in a Web Browser and in a published project. I've observed the problem when I capture website interactions (using either Safari or Firefox). It might be isolated to web browsers and not other applications, but I'm not sure. The project slides themselves look fine. The problem occurs during the transition to an HTML/SWF-based preview or published file.
Unfortunately the problem appears to be intermittent and unpredictable: one Preview (in Web Browser) might show one corrupt screen; a subsequent Preview (in Web Browser) might show four corrupt screens (after making no changes to the Captivate file). It appears to be related to various timeline factors (mouse position, mouse duration). I was able to temporarily eliminate the problem in one project file by making sure all mouse elements had a 2/10th second gap before the end of the slide and were no longer than 2 seconds long. But in a later test, controlling for these variables did not work.
There are two other related bugs that occur in Preview or publish:
Mouse. If I move the mouse object from its original position on the timeline, say, from the end of the slide to a position just before, and then move it back to the end of the slide, the result is faulty mouse behavior. It moves very slowly over the first part of its arc, then either skips suddenly to the destination or doesn't complete the arc at all when the slide advances to the next slide.
Audio. Sometimes the audio for a single slide will not play. This is intermittent and unpredictable, like the screen corruption bug. The problem sometimes goes away after moving the mouse on the timeline slightly, but this isn't reliable.
In any case, moving the mouse away from the end of the slide is not a desirable workaround, even when it does work. The delay between the "click" and the slide transition looks sloppy, and is contrary to the expected mouse behavior (to quickly trigger a slide transition).
I have been working with two people at Adobe tech support, but we have not found a solution or isolated the problem. I've also documented several keystroke bugs on this forum. So, after nearly 3 weeks of aggravation, I have concluded that Captivate 6 for Mac has serious bugs and is not reliable. I am forced to go back to Captivate 5.5.I have experienced the exact same issues. I've republished files over and over again with unpredictable results. Missing audio, ghost backgrounds, visual artifacts. That doesn't even begin to address the other major annoyances like the stage jumping around when you do things like adjust element properties, audio editor opening up half off the screen so that it has to be manually dragged back EACH TIME.
I'm totally frustrated and disgusted with the quality of this product. I don't care one bit about all the new features it has, I just want the featues that are there to work right and work reliably. Today alone, I lost over 4 hours of productivity to resolving buggy software issues... I'm not exaggerating, 4 HOURS !. This is absolutely unacceptable. The software does NOT work well at all. Adobe should be horrified with how bad this software performs. I can't say enough negative things about this without using expletives that are well deserved.
After purchssing adobe software for 25 years, I am running out of patience. They are too big and too focused on new features instead of just making the ones they have work well. I used to love Adobe more than any other software company. That is definitely no longer the case. I have no intention of up doing any more upgrades after this. If these APPALLING blatant issues are not resolved before they release version 7, I will not upgrade and may well consider enlisting others in a class action suit. Fire all the developers who have a hand in this. Fire all the managers who signed off on it's readiness. Go back to the drawing board and make this right.
I fully intend on posting this in every forum I can find. This software has cost me too much time and money. -
Functon module for closing stock
Hi All,
Is there any function module is there to findout closing stock by taking opening stock .
Thanks®ds,
Sree.I have one report for closing and opening stock go through it
*& Report Z_OPEN_CLOSE *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
MSEG, " Material Document: Item Data
MARA,
MARD,
S031,
EKKO,
EKPO,
LIKP,
MAKT,
J_1IWRKCUS,
T001W,
WB2_V_MKPF_MSEG2,
MMIM_REP_PRINT,
YW2_STKMOVEMENTS,
YPLNT,
MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
PPLNT LIKE YPLNT-PPLNT,
WPLNT LIKE YPLNT-WPLNT,
END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
VGART LIKE MKPF-VGART,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
KUNNR LIKE MSEG-KUNNR,
ZEILE LIKE MSEG-ZEILE,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
MATNR1 LIKE MSEG-MATNR,
END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
WERKS LIKE MARDH-WERKS,
MEINS LIKE MARA-MEINS,
MATNR LIKE MARDH-MATNR,
LGORT LIKE MARDH-LGORT,
LABST LIKE MARDH-LABST,
LFGJA LIKE MARDH-LFGJA, "Added -MB
LFMON LIKE MARDH-LFMON, "Added -MB
PERIO(6),
INSME LIKE MARDH-LABST,
EINME LIKE MARDH-LABST,
SPEME LIKE MARDH-LABST,
RETME LIKE MARDH-LABST,
O_STK LIKE MARDH-LABST, " Opening Stock
C_STK LIKE MARDH-LABST, " Closing Stock
END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
WERKS LIKE MARD-WERKS,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
INSME LIKE MARD-LABST,
MEINS LIKE MARA-MEINS,
EINME LIKE MARD-LABST,
SPEME LIKE MARD-LABST,
RETME LIKE MARD-LABST,
END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
LGORT LIKE MSEG-LGORT, " Storage Location
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TLOSS LIKE MARDH-LABST, " Total Loss
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
C_STK LIKE MARDH-LABST, " Closing Stock
TRFSTK LIKE MARDH-LABST, "Transfer stock
MENGE LIKE MSEG-MENGE,
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
MTART LIKE MARA-MTART, " Material Type
MAKTX LIKE MAKT-MAKTX, " Description
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MEINS LIKE MARA-MEINS,
LABST TYPE MARD-LABST,
MAKTX LIKE MAKT-MAKTX,
END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
BWART LIKE MSEG-BWART,
SHKZG LIKE MSEG-SHKZG,
VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
MONTH(8) ,
END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
KEY WITH HEADER LINE INITIAL SIZE 0,
G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
MON(2),
FYEAR1(4),
MON1(2),
OBAL LIKE MARD-LABST,
CBAL LIKE MARD-LABST,
INDEX TYPE I,
COUNT,
COUNT1 TYPE I,
O_STK TYPE P DECIMALS 3,
C_STK TYPE P DECIMALS 3,
V_MJAHR LIKE MKPF-MJAHR,
MONTHS TYPE TRFF_TYPE_DEC_6_5,
MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
ALV_VARIANT LIKE DISVARIANT,
ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
ALV_REPID LIKE SY-REPID,
ALV_PRINT TYPE SLIS_PRINT_ALV,
ALV_DETAIL_FUNC(30),
ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
S_MBLNR FOR MKPF-MBLNR,
S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
M1 RADIOBUTTON GROUP P1,
Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
IF S_BUDAT-HIGH IS INITIAL.
S_BUDAT-HIGH = S_BUDAT-LOW.
MODIFY S_BUDAT.
ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = IDATE-LOW
I_DATE_TO = IDATE-HIGH
IMPORTING
E_DAYS =
E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
R_BUDAT-LOW = S_BUDAT-LOW.
APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
I = I + 1.
R_BUDAT-LOW+6(2) = '01'.
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = R_BUDAT-LOW
IMPORTING
LAST_DAY_OF_MONTH = R_BUDAT-HIGH
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
R_BUDAT-LOW = S_BUDAT-LOW.
MODIFY R_BUDAT.
ENDIF.
IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
R_BUDAT-HIGH = S_BUDAT-HIGH.
MODIFY R_BUDAT.
ENDIF.
For Summary on 26.4.05.
IF Y1 = 'X'.
CLEAR R_BUDAT.
REFRESH R_BUDAT.
R_BUDAT-LOW = S_BUDAT-LOW.
R_BUDAT-HIGH = S_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR R_BUDAT.
ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
MON1 = MON.
FYEAR1 = FYEAR.
MON = '12'.
FYEAR = FYEAR - 1.
ELSE.
MON1 = MON.
FYEAR1 = FYEAR.
MON = MON - 1.
FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
IF Y1 = 'X'.
LOOP AT S_BUDAT.
S_BUDAT1-SIGN = 'I'.
S_BUDAT1-OPTION = 'NB'.
S_BUDAT1-LOW = S_BUDAT-LOW.
S_BUDAT1-HIGH = S_BUDAT-HIGH.
APPEND S_BUDAT1.
CLEAR S_BUDAT1.
ENDLOOP.
ENDIF.
IMKPFT[] = I_MKPF[].
IMKPFT2[] = I_MKPF[].
IMARDT[] = I_MARD[].
IMARDHT[] = I_MARDH[].
PERFORM MONTH_WISE.
PERFORM PROCESS_MOVEMENTS.
PERFORM CALCULATE_OPENING_STOCK.
PERFORM UPDATE_NON_TRANSACTION_ITMS.
PERFORM DELETE_EMPTY_RECORDS.
CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
MF_MONAT LIKE ISELLIST-MONTH,
MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07.
IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
MF_HLP_REPID = 'SAPLALDB'.
ELSE.
READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
EXIT.
ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
EXPORTING
INPUT = MF_DYNPFIELDS-FIELDVALUE
IMPORTING
OUTPUT = MF_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
MF_MONAT = SY-DATLO(6).
ENDIF.
CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
EXPORTING
ACTUAL_MONTH = MF_MONAT
IMPORTING
SELECTED_MONTH = MF_MONAT
RETURN_CODE = MF_RETURNCODE
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 01
HOLIDAY_CALENDAR_NOT_FOUND = 02
MONTH_NOT_FOUND = 03.
IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
INPUT = MF_MONAT
IMPORTING
OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
COLLECT MF_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07. "<<== note 148804
ENDIF.
ENDIF.
ENDFORM. "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR S_BUDAT.
REFRESH S_BUDAT.
S_BUDAT-SIGN = 'I'.
S_BUDAT-OPTION = 'BT'.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
APPEND S_BUDAT.
ELSE.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
MESSAGE I041 WITH TEXT-005.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
CLEAR S_BUDAT.
LOOP AT S_BUDAT.
CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
S_BUDAT-LOW+0(4) INTO LOW.
CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
S_BUDAT-HIGH+0(4) INTO HIGH.
CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
FHEADER-TYP = 'H'.
FHEADER-INFO = V_FIN1.
APPEND FHEADER.
CLEAR FHEADER.
ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_TOPOFPAGE'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_USER_COMMAND'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT. -
Adding Sum Totals from Multiple Tables in A single Document
Hello All,
I'm having trouble adding sum totals from multiple tables I've created in a Pages 09 doc. I putting together a spreadsheet for cost projections for a house remodel. I created tables for each room of the house. At the bottom of the document I'd like to have another table that takes the totals from each individual room and adds them up. Problem appears to be that each table has the same x/y axis labels so row and column numbers/letters are repeated so the final table can't quantify thing correctly.
Any easy solutions? I can't find anything that's helped in my search efforts.
Thanks,
JosefisJerry,
Thanks for the feedback. I thought that might be the case. And you were correct to assume I was more comfortable in Pages. I'm halfway through converting everything to numbers. In the end it will work great too. Just some different formatting/design choices to be made as numbers doesn't appear to be as versatile in the same way pages is with design. So far it looks pretty good though.
Thanks again,
Josefis
Maybe you are looking for
-
HP G62-455TX Graphic Card malfunctioning
Problem is the laptop screen flickered and went off several times, displaying error message that AMD crashed. I reinstalled the drivers replacing the older with the older version and then with the latest version given on the website. But in both case
-
Recently I upgraded from snow leopard to Mavericks . Since the upgrade my Adobe Creative Suite 4 will not launch any programs. I downloaded adobe license recovery it says " this program is no longer supported " . At this point I am ready to go back t
-
Cannot see business system in integration directory.
Hi all, I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system. I have configured the scenario as given in the exercise scenario in the inte
-
How to Create Reports Services
Hi all, <br><br> In Oracle 10 R2 Application Server for Windows 2003, is there a way to create a new Report Server services in the Application Server other than the already existing one? If yes, how? <br><br> Thanks in advance. <br><br> <i>Note:</i>
-
Macmini with Compaq CRT MV520 monitor and iMovie HD
I just purchased macmini and am using an old Compaq CRT computer monitor, at 800 x 600, with it. The quality if fine and, for the most part, it works well. But when I try to open iMovie, it gives me an error message telling me that I need to raise my