Publish ESB without username/password of connection using Jdeveloper
Hi,
I have used jdeveloper10.1.3.3 to developer BPEL Process and ESB services.
I have created a Application Server Connection in jdeveloper with hostname, url path and RMI Port right, but without username and password.
I have created a Integration Server Connection mapping the connection above. I tested this Integration Server and the result was:
Application Server: FAILED
BPEL Process Manager Server: OK
ESB Server: OK
After the test of Integration Serve Connection , I tried register my ESB project using the action "Register witn ESB" from Jdeveloper and the result was the error:
"Reload services from ESB Server failed while trying to query service definitions from server."
After the registry, I saw in the ESB Crontol that the ESB Service was publish.
Question:
Is possible resgistry a ESB service with URL connection correct, but without username and password of Application Server Conncetion from Jdeveloper?
Is there any configuration for validat of username and password of Application Server Connection in the publish of ESB service?
Is a bug of jdeveloper?
Thanks,
Fabrício.
Hello. I'm pretty sure you cannot register an ESB with no username/password - it uses the username/password information in the integration server connection properties to login and deploy. We were surprised that BPEL uses ant build properties so you can specify the name/password, ESB does not - it only uses the integration server connection info.
In 10.1.3.4 (which we don't have yet) the ability to use ant for ESB deploys has been added.
Daren
Edited by: djcasey on Jan 30, 2009 11:12 AM
Similar Messages
-
What are the username, password and connect string for Designer 6.1.1?
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
Oracle designer6.1.1
- Date/Time
- Browser + Version
IE 6.0
- O/S + Version
Win 98
- Error Msg
ORA-12154:TNS:could not resolve service name.
RME-00220:Fail to connect to repository
These error messages were shown after I entered system, manager and internal, respectively.Hi YungJen Chen,
There is no general username, password and connect string for
Designer 6i Release 4.1.1.
First, you install the client tools using the Installer. See also the
Designer Installation Guide, Chapter 1, 'Client Side installation'.
Second, you install the repository into an existing database, using
the Designer Installation Guide, Chapter 2, 'Server-side installation,
migration and upgrade'.
The Installation Guide provides step by step instructions on what
users you need to create for various purposes. Any database users
you may need to use such as System or Sys will use the password
given when you installed the database, or whatever passowrd you
changed it to since.
The Installation Guide is available as part of the download, or from
your Windows Start Menu once the Designer client tools are installed
or from the Designer Documentation page here on OTN.
Hope this helps. Regards,
Dominic Battiston
Designer/JDeveloper Product Management -
What are the username, password, and connect string for Designer6i R4.1.1
As the title, I tried system, manager and internal.
But it did not work out.
Thank you for your help.Hi YungJen Chen,
There is no general username, password and connect string for
Designer 6i Release 4.1.1.
First, you install the client tools using the Installer. See also the
Designer Installation Guide, Chapter 1, 'Client Side installation'.
Second, you install the repository into an existing database, using
the Designer Installation Guide, Chapter 2, 'Server-side installation,
migration and upgrade'.
The Installation Guide provides step by step instructions on what
users you need to create for various purposes. Any database users
you may need to use such as System or Sys will use the password
given when you installed the database, or whatever passowrd you
changed it to since.
The Installation Guide is available as part of the download, or from
your Windows Start Menu once the Designer client tools are installed
or from the Designer Documentation page here on OTN.
Hope this helps. Regards,
Dominic Battiston
Designer/JDeveloper Product Management -
Why can't I reset the master password with the option of removing all username:passwords by unchecking "Use Master Password"? Currently, there seems to only be the option to issue a "chrome:" command in URL which DOES reset the master password. However, it was something that I had to google. The intuitive option would be to uncheck the "Use Master Password" checkbox, receive a verification dialogue, and blammo, password reset. Please make this a feature, thank you.
''cor-el [[#answer-702776|said]]''
<blockquote>
You can remove all password in the Show Passwords dialog.
That is where you manage the passwords.
The master password is only for protecting the passwords with an extra level of encryption and has nothing to do with erasing passwords apart from resetting the MP in case you have forgotten the MP and can't open "Show passwords".
</blockquote>
Sorry, for being unclear. Essentially this is a feature request for an option under Firefox options (why not?) to reset my Master Password not knowing the Master Password. For Security reasons I understand why all the saved passwords have to be wiped, but wiping the Master Password (having forgotten it) should be an option without having to issue an arcane command that one has to google to figure out. -
Howto access Apex through dbms_epg without username/password ?
I had just setup HTMLDB using dbms_epg (htmldb_epg_config.sql).
Now i'm unable to access http://localhost:port/htmlb via http without username/password.
Granting anonymous access to xdb repository doesn't help. I'm able to access http://localhost:port without username/password, but then i try http://localhost:port/htmlb - no go.
How can i enable http access to http://localhost:port/htmlb without username/password ?We are using 10.2.0.2 EE Edition and decided to try Apex without use of standalone Apache.
I've already done that while running dbms_epg_config.sql
declare
l_cfg xmltype;
begin
dbms_xdb.cfg_update(xmltype.appendchildxml(dbms_xdb.cfg_get(),'/xdbconfig/sysconfig/protocolconfig/httpconfig', xmltype('<allow-repository-anonymous-access xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd">true</allow-repository-anonymous-access>')));
exception
when others then
select updatexml(dbms_xdb.cfg_get(),'/xdbconfig/sysconfig/protocolconfig/httpconfig/allow-repository-anonymous-access/text()','true') into l_cfg from dual;
dbms_xdb.cfg_update( l_cfg );
commit;
dbms_xdb.cfg_refresh;
end;
I'm actually able to access repository without supply username/password.
The troubles begin as sun as i try to access /htmldb - it wants password for HTMLDB_PUBLIC_USER account before i can proceed. -
Hi ,
I have installed Oracle AppS 10.1.2.0.2 .. Specifically the Apps Infrastructure and and the Oracle Portal.....
What are the username/password to connect to portal....???
Thanks....
Sim
Message was edited by:
sgalaxyHi ,
I have installed Oracle AppS 10.1.2.0.2 .. Specifically the Apps Infrastructure and and the Oracle Portal.....
What are the username/password to connect to portal....???
Thanks....
Sim
Message was edited by:
sgalaxy -
Connection without username, password or database name
I'm trying to find an automated way (for a given dbms) to check whether a server name and port number correctly identifies that the given dbms is running at that location.
For example, in MySQL, I can do something like:
DriverManager.getConnection("jdbc:mysql://" + serverName + ":" + port + "/");
So, I havent specified a username, password or database name. And this works (at least on my installation) by simply checking for an exception.
My question is: Can I always rely on this for MySQL or does it depend on how the MySQL dbms is configured?
What about MS SQL Server and Oracle?
Any help, much appreciated.Your question was "Can I always rely on this for MySQ"No it wasn't. My question was:
"Can I always rely on this for MySQL or does it depend on how the MySQL dbms is configured?"
Its the bit between the "My question is: " and the question mark. I understand that if you chop the question in half then "no" is a valid answer but then thats not the same question.
and the answer is[i] No! If your abilitydepends on the MySQL configuration then the answer to
your question is still No because it means you
can't always rely on it.
Wrong again!
If I was to ask "does it depend on how the MySQL dbms is configured?" then the answer is yes.
I think "No, yes" is a better answer to the question. Although I think masijade answer is best.
But anway, thanks for your constructive reply. -
Auto_master, mounting afp shares without username/password in plain text?
Hi,
i'm trying to mount afp-shares from a Synology Diskststation and an Airport Time Capsule via the automountd.
I've modified the /etc/auto_master as follows:
# Automounter master map
+auto_master # Use directory service
/net -hosts -nobrowse,hidefromfinder,nosuid
/home auto_home -nobrowse,hidefromfinder
/Network/Servers -fstab
/- -static
/Synology /etc/auto_afp -nosuid
I've created the /etc/auto_afp:
iTunes -fstype=afp afp://"Username":"Password"@DiskStation.local/iTunes
Data -fstype=afp afp://"Username":"Password"@AirPort.local/Data
Providing Username and Password works fine, but is there a way to make this work without the Username and Password in plain text?
Thank you.An applescript application set as a user login item should be a better choice.
I'm just about to work this out for an SMB mount of a users Windows home (augmented AFP homes are breaking preventing the 'Mount UNC path' option in the AD plugin).
Post back if you still want info.
D -
Fields (username+password) of Connection Factory-authentifcation disabled
Hallo,
I want to create a JMS ConnectionFactory with authentification (username+password).
In the visual administrator (JMS-Provider --> runtime --> connectionfactory) both fields (user+passwords) are disabled.
Can anybody help me please and say me how can I make both fields enabled?
Thanks.
Regards
StefanNo, the username/password doesn't need to be provided again because you're already making the connection to JMS through the connection pool and the composite would just use the jndi name for that connection pool. As long as you're using the jndi name for the connection it shouldn't require you to enter the username/password again.
-
Goto Responsiblity Page without Username/Password !!
Hi all,
In 11.5.10.2, Is it possible to go to the Responsibility page without issuing the username and password?
In 10g Application server we are able to do this by adding the following line in
formsweb.cfg under ORACLE_HOME/forms90/server:
[example]
userid= test/test@db_name
After saving this file we restart the forms service.
see the url below:
url : http://host-name.domain-name/forms90/f90servlet?config=[example]&form=<location_of_main_form>.fmx
Now we are able to access the forms and it wont ask for username/password.
Is it poosible to do the same in 11.5.10.2 ?
Thanks,
MaheshMahesh,
There is no supported way to pass the application username/password and skip the main login page. You can pass the username only in the application URL by adding "username=<username>" to the application URL.
What is the point of accessing the responsibility page without entering the username/password?
Regards,
Hussein -
How to create a database connection using Jdeveloper 10g
when i try to create a database connection,its asking for connection name.is that connection name is user-defined or predefined name??In the next step its asking for username and password.where do i get that username and password.if anyone know this please explain me in detail coz this is for the first time am using JDeveloper.
Thanks in advance.Hi user583040,
May be you could have a look on this: http://my.opera.com/Tiftif/blog/faq-jdeveloper-english §5.2. If you have suggestions to improve this document, i will greatly appreciate to add them to it.
Regards,
Tif -
Invalid Username / Password while connecting to a Wi-Fi network
Hi,
I cannot connect to the wi-fi network from the Hotel. On the first day it worked perfectly, today it didn't.
It is not a secured (WPA) wifi but after the connection, need to open the browser to enter login and password.
I have a laptop that is connected to the same wi-fi and it is working.
Checked several times login and password, tried to forget network and the reconnect, tried to turn the cell off and then turn it on.
Any suggestions?When you are connecting through a hotels WiFi like this they may occasionally require you to login via a home web page, this is quite normal. In many cases the password for this will be provided at checkin and with this being the case it would be worth speaking with the front desk to see if they can assist you with this.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
POP authentication without username/password ??
Is there a way to disable authentication (authentication/password) in POP (incoming mails). Our mail client does not provide user info for authentication.
Sunil.Got it. Uncheck the access login checkbox in IMAP.
-
Cloud connection using jdeveloper version 11.1.2.3.0
Hi,
I'm new to jdeveloper and cloud, I'm trying to setup a connection to my trial java & database cloud service. I can't seem to find documentation on how to setup up a connection.
Can anyone provide some details?
Thanks
Bruce.Cloud connection is not in 11.1.2.3 - you can find it in the latest production 11.1.1.6 and the upcoming 12c version
https://blogs.oracle.com/shay/entry/deploying_oracle_adf_applications_on -
Using SSO username/password in java portlet for Database Connection
Hi all,
We implemented java portlet with environment Oracle Application server 10.1.2 and Portal 10.1.4
At present we are picking the database username and password and connect string in properties and our
java class is reading the properties file and connecting to database to fetch the records.
Our idea is to not to pick the username/password and connect string from the properties file or
not to configure the datasource in data_source.xml.
Our Requirement is who ever login to the Portal(SSO) our java class should pick the sso username/password and
connect to database to fetch the record(s).
Because our database users are one to one mapped to sso user(s) of portal.
We request anyone to guide us how can we do it or suggest any suitable solution for our requirement.
Thanks
Dan TeyI think this is a no-go, since you cannot retrieve a cleartext password from the OID if I'm correct.
Maybe you are looking for
-
I have a Iphone 4S and I from Chile. The question is that navigation turn by turn don't work me and Chile is one of the countries where it works
-
NX6600 VTD128E Diamond Edition does it support 1440 x 900 resolution
Hi everybody This is my first posting to this forum. I soon have all the parts together to build my new rig. The only thing missing is the monitor. I am very interested in the ViewSonic VA1912w which is a 19" LCD Wide Screen Monitor with the resoluti
-
Deliv. date outside period covered by factory calendar TR//PO error
Dear Sap Experts I am creating the P.O For Delivery Date 31.03.2010 System has giving following error, Deliv. date outside period covered by factory calendar TR How can I overcome this error, Please Give me the solutions Thanks
-
Table which stores all the structure names in SAP
Hi , Please let me know the table where we can find all the structure name like for tables we are using DD02L, Tcodes TSTC, like that where we can find all the structure name Regards, Bhaskar
-
Hello folks, I've been an Apple user since 1997 when I got to the USA. Did my M.A, gave classes and way back to Brasil, from where I am typing right now. I brought with me my beloved Power Mac G3 beige 266mghz, my iMac G4 flat Mac OS 10.1.2 and my iB