Publish iCal to OS X Server 10.3.9 with WebDAV enabled--not working

I've published iCal calendars to other servers with WebDAV enabled, but so far have not been able to publish to OS X 10.3.9 server with WebDAV enabled.
Error message is: Calendar could not be published. This access has been forbidden by server.
I'm using an administrative username and password to eliminate any question about access to specific directories, I've ensured that the site is WebDAV enabled using the OS X Server Admin gui (so, web/sites/domain name/ editing section, under Options). I've been unable to find any more detailed instructions on publishing to OS X server. Any suggestions, webpage tutorials, etc., greatly appreciated.
FWIW, I suspect the folder location for where the .ics file would go on the server may be the issue. The web content is in Library/WebServer/foldername and this is where I put the calendar folder.
Marcus Duke
Webmaster/Info Specialist
Washington Sea Grant
UW School of Aquatic & Fishery Sciences
G4 1gHz Mac OS X (10.3.9)

Hi Jovan
I don’t think its a problem with 10.3 server as such. You’ve got to remember that 10.3 is getting on a bit. As far as supporting the latest drive sizes Apple as well as other interested parties would devote their energies in supporting the latest operating systems. For example Microsoft have recently released Vista. Most interested parties will get on board the Vista bandwagon and start developing and writing drivers and software for that rather than XP. After a while you will start to see less and less being developed for the older operating system. I think this is just one of those times.
Tony

Similar Messages

Weblogic server 5.1.0 with sp8 does not work with LDAP (Netscape Directory Server 4.12)

I have weblogic server 5.1.0 with the sp8 running on Windows NT server 4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect to ldapse
without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError: weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
And here is the my ldaprealm.properties file
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic 5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions.

BEA support just gave me the solution.
They told me to uncomment out the line
server.alias=netscape
in the ldaprealm.properties file
And I am able to start weblogic with my NIS
Thanks
"Enrique" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
Have you try to remove the "system" user on the LDAP server?
Regards.
"Honghai Zhang" <[email protected]> wrote:
I have weblogic server 5.1.0 with the sp8 running on Windows NT server
4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:***************************************************************************
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect toldapse
without a principal to authenticate as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError:weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate
as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)***************************************************************************
And here is the my ldaprealm.properties file////////////////////////////////////////////////////////////////////////////
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))////////////////////////////////////////////////////////////////////////////
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions.

Publish iCal Calendar using Tiger Server

I've been searching for a simple way to publish iCal calendars using Tiger Server. Here is what I need to do:
I need one user to be able to publish multiple "studio schedule" calendars to the Tiger server...and I need all the regular users in the studio to be able to subscribe to it so that they can see what work they have scheduled for the day. The regular users do NOT need to be able to make changes to the calendar...they only need to see it. (and print it if needed) Only the studio manager needs to be able to see and edit the published calendar.
I called Apple support for help on this one and they told me they would have to charge me $695 just for me to be able to get help on this....which surprised me because I'm just trying to use their software to do something it is supposed to be able to do! LOL The only other suggestion he could give was for me to look to the discussion groups here for help....so here I am!
HELP!
xServe G5 Mac OS X (10.4.6) xServe G5

The first thing you need to do is set up WebDAV on the Server and share a directory. If you need instructions on how to that just follow this thread.
http://discussions.apple.com/message.jspa?messageID=2793917#2793917
Once you've set up a shared directory you just publish the calendar to it from within iCal.
To do that, set up a calendar, select it and then select 'Publish' under the 'Calendar' menu. In the dialog box that opens up give the calendar a name without spaces. Select 'Publish on: a Private Server'.
In the field for 'Base URL:' fill-in the complete url to the server directory you set up previously using the WebDAV instructions. For example, if you set up a directory on the server called 'calendars' and the URL of the server is www.example.com you would put in 'Base URL: http://www.example.com/calendars'.
Now enter the 'Login' name and 'Password' for an account that has access to the shared directory as you've set it up using the WebDAV instructions.
Select the other options you want to enable in the dialog box and then click on 'Publish'. Now the calendar is published and available for others to subscribe to.
Now to subscribe to the calendar, just select 'Subscribe' under the 'Calendar' menu in iCal and enter the URL for the calendar. Using the example from above you would enter 'webcal://www.example.com/calendars/StudioWork.ics' for a calendar that was named 'StudioWork'.
You can also email the URL for the published calendar by selecting it in iCal and selecting 'Send Publish Email...' under the 'Calendar' menu in iCal.

Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

Hello,
I currently have windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions
For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM.
As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.
Using an RDP client( v8.1) I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs
and I can use the device without any issues.
However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client) but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
Because I have ran all updates the rdp version on the VM is running v8.1.
Previous to installing the updates USBr still was not working
I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM :
RDP 8.0 -- Enabled
Configure RFX -- Enabled
Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
Many Thanks
Brian

Hi,
According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
Server6: Conversion is not supported in restricted language mode or a Data section.
Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
By the way, from Technet:
You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
Client Access Permissions
http://technet.microsoft.com/en-us/library/dd638131.aspx
Feel free to contact me if there is any problem.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Cableone innstalled a new server and now my thunderbird email will not work. What do I do now?

Cableone, our internet provider, has changed from a Google server to their own server and now my Thunderbird email will not work. They have directions listed to make it work, but this does not work. I have also contacted Cableone's technical support and they say because thunderbird is not their system they have no responsibility to make it work. I prefer to use Thunderbird for my email - how can I make it work? Also, I have tried the Thunderbird 'Automatic Account Configuration' help and it does not work.

Ask your less than helpful provider for the server settings and setup the new account up manually.
You want to know IMAP or POP and the name of the server. The port number and if it uses SSL/TLS security.
You need the same info for the SMTP server for outbound mail.

Server 2012 - Windows 8 RemoteFX USB Redirection not working

I have setup a test envrionment with Server 2012. RDS has been installed. Hyper-V, RDCB, RDWeb, and RDVH are all on the same box. I have a personal unmanaged Remote Desktop Virtual pool with one test virtual running Windows 8. I have
enabled RemoteFx USBdirection in Group Policy on every machine involved and forced GP update.
I can see my devices in the Remote Desktop Connection details on the client (i.e. it shows up under Local Resources/Local devices and resources/More/Other supported RemoteFX USB devices. Or, if you prefer, I have added "usbdevicestoredirect:s:*"
to the .rdp file that the Web Access spits out then I log in to web page and attempt to connect to my published virtual machine.
The problem is that the devices do not show up anywhere in the virtual machine's device manager once logged in. Furthermore, there is no Universal Serial Bus node in device manager at all. I do not have a RemoteFX compatible GPU available for
hyper-v or the virtual machine, but it is my understanding with Server 2012 and Windows 8 this is not necessary.
Does anyone have any ideas? I thought I saw a [email protected] or similar email on one of the blog comments, but I can seem to find the post again, I have scoured the internet relating to usb redirection and remotefx and it is a disorganized mess.
Thanks.
Wayne

The first device I am focusing on is a desktop scanner, an Epson GT-S50. This device shows up in the client's Remote Desktop Connection details as a "RemoteFx Other supported RemoteFX USB Devices".
Although, and perhaps I'm a total fool, but, I have not installed Epson's specific drivers for this scanner on either the client, nor the VM. My client's Device Manager currently shows the scanner under "Other Devices" as "Epson Scanner". The
Device Status says that "The drivers for this device are not installed". My expectation was that this was still enough to redirect the same object (and its condition) to the VM. At that point, I expected the VM to see and respond
(in its own Device Manager) the same way, at which point I would then install the Epson-specific driver package on the VM (i.e. without ever having to install the Epson package on the client).
The second device I wanted to test was a Ezurio BRBLU03 Bluetooth Adpater. This device's drivers have been installed on the client and works flawlessly, locally. However, this device is not showing up at all under "RemoteFx Other supported
RemoteFX USB Devices", even after "usbdevicestoredirect:s:*" was specified. I suppose this is a separate issue, and I was planning on troubleshooting this next. For now I just wanted to see a proof of concept that a device that RD can see can in
fact be redirected.
I guess I have based my expectations on the experience we had with a third-party USB redirection tool that we tested prior to engaging in testing RDS.
My client is running Windows 8 Enterprise, and the VM (vhdx) is running the same. When you refer to the RDC 8 update, isn't that already included in this OS? In other words, is that only a concern if I were using Windows 7?
Thanks for your help.

Save a published Access services database site as a template with contents does not work

Hi
I have a Access site on the SharePoint. I wanted the site to be duplicated to another subsite, I then did the usual - save site as a template with contents and made a copy of it, however it does not work. I have been getting the error as stated below
error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'Default'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
However, it works if I make a local copy and publish it to the subsite? How does access services work on SharePoint and why the template option can't be chosen.

Hi cally, check the following links for possible solutions:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/1e2b77ba-4cfa-4aa3-97e4-b7b39fbd46fd/error-with-ssrs-report-that-has-a-sharepoint-list-data-connection-ssrs-r2-and-sharepoint-2010?forum=sqlreportingservices
http://blog.mikehacker.net/2012/05/16/sharepoint-2010-access-services-reporting-with-sql-2012/
cameron rautmann

In dev server my payment advice form f110_prenum_chc is not working

hi,
friends i need urgent help.
1) i have copied f110_avis_in frm 000 client to 200 client with form name
   z_prenum_dup.
2) i have copied f110_prenum_chc frm 000 client to 200 client form name
zf110_prenum_chc1.
3) then i modified my both forms in 200 saved assigned TRs and
transported frm DEV server to PRD server(client 700).
4)in dev server 200 client my both forms are working
but in prd server 700 client my form cheque z_prenum_dup is
working but payment advice form zf110_prenum_chc1 is
not working.
5) but i can see my both forms r their in 700 prd server in se71 t.code.
6) if i run f-58 tr.code and by switching on debug mode i can see my
   cheque form but not payment advice form.
7) if i run in 200 client i can see my both forms.
can any body plz help me out of this issue.

Dear,
   I will be able to put some points, if you can give me some more idea about ur problem,
1, Does system giving any error..?
2, Can you see a preview..?
As I understood, it must not have any problem in transportation.
You can also check with Respective functional consultant whether he has done with required customization in NACE..?
One more thing you can do is,
open a program RSNAST00 and put break point at " PERFORM (tnapr-ronam) IN PROGRAM (tnapr-pgnam) USING returncode", here you can check at runtime ( While in debugging mode) the value of field TNAPR-FONAM, this value must be your SmartForm. If it is not the case then, there is problem with NACE settings and contact your functional counterpart.
Hope it's helpful .......Enjoy.
Regards,
Chetan

Windows Server 2008 R2 DNS Entry Auto remove not working

Dear All,
I have configured DNS Ageing for 30 days removal of unwanted host entry.but it will not work.
Active directory DNS having all unwanted host in forward lookup zone and as well as reverse lookup zone.
how to solve this ?
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi,
This is a rather common problem when configuring Scavenging and Aging of stale DNS entries. This has to be set in two spots, not just one as so many admins have difficulties with. It isn't very obvious.
Aging and Scavenging must be set on both the DNS Server and on the Zone
that you want to clean. In addition, DNS needs to be Active Directory integrated and resource records need to be dynamically registered. Static entries are ignorned.
First step:
To set aging and scavenging properties for the DNS Zones using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Set Aging/Scavenging for all zones.
Select the Scavenge stale resource records check box.
Modify other aging and scavenging properties as needed.
Second Step:
To set aging and scavenging properties for the DNS Server using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Properties.
Select the Advanced tab,and then enable Enable automatic scavenging of stale records
check box. Once done, specify the Scavenging period (That is recurring
interval for Scavenging on a DNS server) and click on OK
That will do it. Your DNS entries will then start auto scavenging based on the times you have determined. Word of caution - do not set your aging too aggressively - I have seen where an admin had set aging down to 1 day and when it finally kicked
off, nearly brought the company to a halt.

I continue to receive an error message "can't conect to server the URL adresses with "file:" are not compatible, what is that?

I continue receiving an error message, I'll translate fron spanish:
Ha habido un problema al conectar con el servidor. Las direcciones URL con el tipo "file:" no son compatibles.
There has been a problem conecting to the server. URL addresses with the "file:" type are not compatible.
Anyone knows what this means?
Thanks.

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

SQL Server dragging of tables to worksheet is not working again in V3.2

V3.2 the SQL Server drag of tables is not working again.
It says Query Builder is not Supporte for this connection type.
Query Builder disabled.

A lost function my users will surely complain about.
My auditors love SQL Developer because from one tool they can audit Oracle and SQL Server databases.

New Coldfusion Server Setup in Flashbuilder and Coldfusion Builder not working

I have not found the combination for adding a new Coldfusion Server in Flash Builder 4.7 or Coldfusion Builder 2.01 with Coldfusion 10. I am running windows 7 64bit. on IIS 7. Coldfusion 10 is running fine.
All was well with Coldfusion 9 Flash Builder 4.6 and Coldfusion Builder 2.0.
Local Server Settings for CF9 were
Server Home C:\Coldfusion9
Document Root C:\inetpub\wwwroot
Version: 9.0.x
Now as soon as I put in C:\Coldfusion10 or C:\Coldfusion10\cfusion I get an error "Server home is not valid".
Any hints on getting this going.

Hi Jeff,
Can you let us know the directory location for wwwroot on your system.
jeffcg2 wrote:
That does not work. As soon as I put C:\ColdFusion10\cfusion in the Server Home I get the error Server Home Invalid. I have uninstalled Coldfusion 10 and re-installed added the latest updates. Coldfusion 10 is working fine running on IIS 7.
Not necessarily. As soon as you select the "cfusion" location, it would automatically pick the wwwroot location.
jeffcg2 wrote:
With Coldfusion 10 , since you have C:\ColdFusion10\cfusion\wwwroot. as the Document root will this only work if you install the included web server?
Regards,
Anit Kumar

Wireless with PEAP Authentication not working using new NPS server

All,
We are planning to migrate from our old IAS server to new NPS server. We are testing the new NPS server with our wireless infrastructure using WISM. We are using PEAP with server Cert for authentication. For testing purpose we are doing user authentication but our goal is to do machine authentication. On client side we are using Windows XP, Windows 7 & iPAD’s
I believe I have configured the NPS & CA server as per the documents I found on Cisco support forum & Microsoft’s site.
But it is not working for me. I am getting the following error message on the NPS server.
Error # 1
=======
Cryptographic operation.
Subject:
            Security ID:                 SYSTEM
            Account Name:                       MADXXX
            Account Domain:                    AD
            Logon ID:                    0x3e7
Cryptographic Parameters:
            Provider Name:          Microsoft Software Key Storage Provider
            Algorithm Name:         RSA
            Key Name:      XXX-Wireless-NPS
            Key Type:       Machine key.
Cryptographic Operation:
            Operation:       Decrypt.
            Return Code: 0x80090010
Error # 2
======
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
I was wondering if anyone has any insight on what is going on.
Thanks, Ds

Scott,
I have disabled MS-CHAP v1 & only MS-CHAP v2 is enabled on Network Policies > Constraints.
I disabled validate Certificate on Windows 7 and tried to authenticate, it is still failing. Here is the output from the event viewer:
Cryptographic operation.
Subject:
Security ID: SYSTEM
Account Name: MADHFSVNPSPI01$
Account Domain: AD
Logon ID: 0x3e7
Cryptographic Parameters:
Provider Name: Microsoft Software Key Storage Provider
Algorithm Name: RSA
Key Name: DOT-Wireless-NPS
Key Type: Machine key.
Cryptographic Operation:
Operation: Decrypt.
Return Code: 0x80090010
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: AD\mscdzs
Account Name: AD\mscdzs
Account Domain: AD
Fully Qualified Account Name: AD\mscdzs
Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 64-ae-0c-00-de-f0:DOT
Calling Station Identifier: a0-88-b4-e2-79-cc
NAS:
NAS IPv4 Address: 130.47.128.7
NAS IPv6 Address: -
NAS Identifier: WISM2B
NAS Port-Type: Wireless - IEEE 802.11
NAS Port: 29
RADIUS Client:
Client Friendly Name: WISM2B
Client IP Address: 130.47.128.7
Authentication Details:
Connection Request Policy Name: Secure Wireless Connections
Network Policy Name: Secure Wireless Connections
Authentication Provider: Windows
Authentication Server: MADHFSVNPSPI01.AD.DOT.STATE.WI.US
Authentication Type: PEAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 23
Reason: An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
Attached are EAP logs & debug logs from the controller.
Thanks for all the help. I really appreciate.

Publishing ical on mac osx server

HI,
I am trying to publish my ical on a Mac os x server and It keeps saying that i am not conttect to the internet...I am wondering if my Base URL is wrong. does anyone know how to find a base URL?
thank you

See if the local Network Diagnostics report that the Mac is connected to the Internet, or if there's an issue.  > System Preferences > Network > select the network connection > Assist me... > select Diagnostics.
Also check the local server setup for various DNS services and network errors, by logging into the server and launching Terminal.app from Applications > Utilities and entering the following harmless, diagnostic command:
sudo changeip -checkhostname
That requires your administrative password. That'll generate a one-time sudo-related message, if it's the first time you've used sudo. You'll then see some local host network information, then an indication that no changes are needed, or possibly some diagnostics.
And to confirm: you're running OS X Server 10.6.8?

Windows Server 2008 R2 Windows 7 folder redirection not working

Hi,
I've got a Windows Server 2008 R2 environment and I'm trying to get folder redirection working on Windows 7 clients. I've configured the group policy on the DC and it's suppose to redirect the user desktop to a folder sitting on another server.
What I've discovered is that any files in that folder aren't being copied down and they aren't visible to the user. I can connect to the folder via its UNC path and when I run a gpresult the GPO is showing that it's applying.
Am I missing something? Shouldn't the files be copied down since I've redirected the desktop? Here are the settings I've used:
Share Permissions
Local Administrators: Owner
Domain Admins: Read/write
Everyone: Read
NTFS
Local Administrators: Full Control on This Folder, subfolders and files.
SYSTEM: Same as above.
Domain admin: Same as above.
Everyone: Traverse folder, execute file, list folder, read data, read attributes and read extended attributes to This Folder only.
GPO Settings:
Under User Configuration -> Policies -> Windows Settings -> Folder Redirection -> Desktop
Setting is Basic - Redirect everyone's folder to the same location.
Target folder location - Redirect to the following location
Root path: FQDN\Shared folder name
GPO is linked to the OU I want to test with and there is a user account in it.
Any tips would be appreciated.
Thanks.

A.
Share Permissions
Local Administrators: Owner
Domain Admins: Read/write
Everyone: Read
Perhaps here is too strong limit.
B. Try to use audit.
Rgds
Milos

Publish iCal to OS X Server 10.3.9 with WebDAV enabled--not working

Similar Messages

Maybe you are looking for