Publishing BW 3.5 to EP 7.0 (2004s) as iView

Hello all,
We are looking into integrating BW 3.5 into our Enterprise Portal as iViews (no Information Broadcasting). I have the following questions:
1) Do we need to perform the same integration steps (portal and BW certificate exchanges? SSO? etc.)
2) Do we need to install BI Java usage type in our EP system?
3) Do we need to have our BW SP in sync with our EP SP?
4) How can we publish it to the BW contents via WAD 3.x when there's only "Publish to EP 6.0"? Can we use the WAD 2004s?
Thanks in advance!
Regards,
Jan

Jan,
I'm looking for the same. Have you got the answers? solved?
Thanks,
Joe Joe

Similar Messages

Publishing NVR (Network Video Recorder) using ISA Server 2004

I have dahua make NVR, i was publishing this through internet using ISA server 2004. In local network, its working fine. But in internet, i able to see the login screen, after enter user name and password. "Fail to connect the device in main connection"
message comes up.
Please give suggestion for this..

Did you find any solution for publishing NVR on ISA server 2004, i have same problem, please share

Passing parameters along with portlet publishing url

Hi All
Any idea if portlet publishing url can take some custom parameters along with the publishing url when using disc api
Thanks

Hi Muthaiah,
Is this IView a Web Dynpro IView. If yes then you can easily do this by simply adding a Url parameter to the default inbound plug of the interface Controller of your WD application.
You can refer to this link: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/webdynpro/inter-application-navigation%20in%20web%20dynpro.pdf">Tutorial 15</a>, <a href="/people/jochen.guertler/blog/2004/11/23/web-dynpro-best-practices-how-to-navigate-between-different-web-dynpro-applications Blog</a>
Do reward points if it helps.
Regards
Sid

Webi Portal Integration

Hi:
Is it possible to "schedule" a webi report from the portal iview?
In my case, I am able to create an iview and link the report ID with it. This lets me see the webi report. Upon clicking EDIT I can go to edit mode (as of now I am investigating the warning netscape.javascript.JSException, but still it works on saing OK) as well and even save it in the Infoview with a different name. Now I am interested in exploring if I can also schedule the webi to run a certain time of the day via Portal.
Any technical help on this would be really appreciated.
Thanks,
Sudipt

Hi,
We will be publishing a Crystal Report, WebIntelligence report and one Xcelsius dashboard. The Crystal report we already have the mechanism for (as you know, since you wrote the book on it!). With the WebI and Xcelsius documents we would like to consider the following scenarios:
1. Publish them as actual, visible reports in the portal. IViews?
>>> The steps would be the same - it is just a different ID for a different object. Make sure you use the option BusinessObjects Enterprise from the iView template.
2. Publish them as hyperlinks in a list of reports
>> You would have to create your own little application offering that or you could use Dashboard Builder as well. Logon to InfoView, go to Dashboards > corporate dashboard > where you have the option of Navigation List and Viewer.
3. Link the portal to InfoView and use it as the presentation medium for the reports and navigation between the reports.
>> possible but you might want to open InfoView in a new window because InfoView is not "made" to run in a frame.
>> Did you look at the KM Integration ? sounds like it would solve lots of items for you.
Since these reports will be interactive and the possibility exists that the WebI report will have to "run on open", what SAP portal complications might that present?

Issue with viewing SAP Dashboards Portal iView in iPad Safari browser (Mobile)

Hi,
I am facing an issue while viewing iViews hosted in SAP Enterprise Portal. I have two iViews -
1) An SAP BICS Dashboard - Published as an iView in EP. I can see the dashboard in my laptop running properly. It consumes BEx queries (BICS dashboard) in the background.
2) A BEx query published as an iView (java web format), also able to run and execute from my laptop.
When I am logging into the portal from IPad Safari web browser I am able to see and run the BEx query iView published in the portal.
However, for the SAP Dashboard iView, it is showing me a blank page after loading. Is it possible to see SAP BICS Dashboard through an iView in Ipad?
I need to run the dashboard iView from the IPad as well. It is an urgent requirement
Would really appreciate your help!!
Thanks,
Debtanay
Message was edited by: Anja Engelhardt

Hi,
Don't spend your time to find the reason.
BI platform content is not supported directly in Safari on iPad or Chrome on Android, only through the Mobile BI apps on these platforms.
Please see PAM chapter "SAP BusinessObjects BI Platform 4.1 Mobile Clients supported with this release"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&overridelayout=true&59407987714033
Best regards,
Roman

Pass Parameters to T.Code in the portal from aTransaction Iview.

Good Morning.
I published a T.code in the portal as a Transaction Iview. This work fine.
I want pass a parameter to this t.code and that the program ABAP can get this value .
I check a suggestion in the post following :
From Portal transaction iView
I did the steps , but this not work. I don't can get the value passed in the field Applications Parameters.
Attach screenshot with the steps that I did.
[Screenshot|http://www.freeimagehosting.net/uploads/3d4dd249ad.jpg]
I want know how can solve this issue?
Thank in advance.
Regards

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

Issue with Captivate 8 and SumTotal Learning Maestro LMS -

I get blank screen when launching course published as SCORM 2004 using Captivate 8. All publish settings are the same as used with Captivate 7 and all course properties and settings are the same in the LMS as courses published using Captivate 7. When course launches, instead of the opening screen from the course, a blank frame appears showing the course playbar and the LMS navigation bar. Opening screen does not appear until the play button on the playbar is clicked. Any idea why this is happening? Below is a screenshot of the blank frame.

Adding additional information about this problem. This appears to be related to issues between Chrome and the Captivate 8 course, but I am not certain exactly why. Today I redid the Captivate 8 file, using a working Captivate 7 file. I published the course using Captivate as a SCORM 2004 course. I tested the course in the SCORM Cloud and it opened correctly to the Opening screen of the course.
Next I uploaded the course to Maestro using IE11 as my browser. The course opened properly when I previewed it from course record. NO blank screen.
I then went into Maestro using Chrome 36 as my browser ( which is what I routinely use) and created another course -- uploaded the same file for this course. The blank screen with the playbar appeared when I previewed the course from the course record.
Still in the LMS with Chrome as the browser, I then went to the course that I had uploaded using IE11 as the browser -- got the blank screen again. Does this confirm that the issue is related to Chrome 36 breaking all Captivate HTML5 content?

Sudden Loading Issue with CP7 Courses on LMS

These courses published with CP7 were working fine on the LMS, suddenly none of them would load for users on the company's network. External learners are still able to launch the courses with no problem. What is interesting is that all the other courses created in other authoring tools are still loading on and off the network. Any ideas anyone?

Adding additional information about this problem. This appears to be related to issues between Chrome and the Captivate 8 course, but I am not certain exactly why. Today I redid the Captivate 8 file, using a working Captivate 7 file. I published the course using Captivate as a SCORM 2004 course. I tested the course in the SCORM Cloud and it opened correctly to the Opening screen of the course.
Next I uploaded the course to Maestro using IE11 as my browser. The course opened properly when I previewed it from course record. NO blank screen.
I then went into Maestro using Chrome 36 as my browser ( which is what I routinely use) and created another course -- uploaded the same file for this course. The blank screen with the playbar appeared when I previewed the course from the course record.
Still in the LMS with Chrome as the browser, I then went to the course that I had uploaded using IE11 as the browser -- got the blank screen again. Does this confirm that the issue is related to Chrome 36 breaking all Captivate HTML5 content?

Dreamweaver 8 FrontPage Extension Support?

Hi All,
I have posted this question in the Exchange Forum but I have
not received a response so I am expanding the question to the
General Forum in the hope that one/some of you have seen this
problem.
I have a client that requires me to work with a FrontPage
enabled server and to use FrontPage extensions. As some of you may
know there is an Extension, published by Adobe, that enables DW and
DWMX 2004 to work with FrontPage Extensions. These extensions
create an additional drop down menu item option in the 'Remote
Info' Category of the Site Definition Wizard.
However, the latest extension (for DW MX 2004) does not work
in DW8; the extra FrontPage extension option fails to appear in the
Site Definition wizard's Remote Info Access category.
Does anyone know how to enable DW8 to work with FrontPage
extensions and FrontPage enabled servers? Should the MX 2004
extension work in DW8? Should I be using a different exchange
download or can the MX 2004 extension be modified locally to allow
access to the FrontPage Extensions?
Any help, as always, is much appreciated.
Thanks.
Nick Barling
www.barkingweb.com

Before doing anything else, take a couple of weeks to
gothrough the DW
tutorials, and also to study HTML and CSS. The more you know
about those,
the easier your transition will be. DW expects alot more from
you than FP
did, and as a result, you may find it much more frustrating
to have the raw
reality of web development staring you in the face rather
than the wizards
of FP.
> Is there a way to convert a Frontpage site into a
> Dreamweaver site
1. I'd define a Dreamweaver site that points to a location on
your hard
drive for the local site's root, and to the current FP site
on the web as
the remote site
2. I'd use Dreamweaver (if your host supports FTP
connections) to download
the remote site to the root of the site you just defined on
the hard drive.
This will pick up all the pages *after* webbot action so that
shared borders
and all are already present in the page HTML. This will also
pick up all of
the server scripting. Note - in the event that you are not
able to connect
using FTP since some FP hosts block that protocol, you will
have to use a
third party 'site copier' like Black Widow, QuadSucker, or
WebCopier, (or
even the DW extension called SiteAssist from WebAssist) to
connect and
download using http protocols. Doing it this way will *not*
retrieve any of
your server-script code, if any (unless you have used the
WebAssist
extension).
3. I'd create a DW template for the pages, that captures the
"shared
border"
effect you had in FP.
4. I'd copy and paste content from each FP pages to a new
template child
page and then save the new child page with an easily
identifiable
nomenclature that is distinct from what was used on the FP
site (since you
are saving the new child pages into the same local site as
the FP pages).
5. When the basic site is completed, I'd upload the new DW
pages to some
staging area/webspace, and by using the browser, I'd verify
that the site
(as it now exists remotely) is complete.
6. Then I'd create a *new* DW site in a new location on the
hard drive, and
connect to and download all the files from the staging site.
7. You can now delete the original FP site from your local
system if you
want.
You now have a complete site (minus any of the FP extension
server-side
code) that has no FP footprint.
If you have used any FP server extension functions on the
original FP site
(form processing, guestbooks, tables of contents, etc.), you
will have to
recreate those functions in DW using 3rd party scripts, or
scripts that you
write yourself.
If this site will continue to be 'touched' by FP, don't even
think of using
DW on it.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"robtattam" <[email protected]> wrote in
message
news:[email protected]...
> Hi, I am a newbie to using Dreamweaver.
> I am having a problem importing a site that has been
running in frontpage
> into
> dreamweaver.
> I run through the wizard but when I have finished the
wizard and it closes
> the
> program down, I re-open but yet my website is not in the
files section to
> the
> right of the screen.
> I have tried creating the folder and then drag and drop
into it, it seems
> to
> see the files, however does not recognise the documents.
> I am using the 31day free trial. Would this make a
difference??
> If anyone could help me to imoprt my frontpage site into
dreamweaver then
> you'll have a friend for life!!!!
> Please help a highly frustrated newbie??!!!
>
> Many thanks in advance
> Rob
>

Multiple listeners on the same IP and Port - is this possible?

Hi all,
I think I know the answer but thought I'd ask anyway, as someone might have some suggestions.
So in IIS we can have multiple websites bound to the same IP - this is called "Hostname binding", and means that IIS will check the Host header of incoming traffic before deciding on what to serve.
Can we do anything similar in TMG?
Or, if I want to handle requests for the same port (443) for multiple applications, do I simply need to get another IP address an interface onto the TMG box?
Thanks in advance.

Hi,
When you publish multiple Web sites with different host names on the same Web server, you can install a wildcard certificate on the Web server that can be used to prove the identity of the Web server to the Forefront TMG computer. A SAN certificate can also
be used.
There is a article describing how to configure Web publishing rules in Microsoft Internet Security and Acceleration 2004 (ISA 2004) Server or Microsoft Forefront Threat Management Gateway, Medium Business Edition to redirect HTTP requests from
the Internet to a specific internal Web server by using the original host header.
http://support2.microsoft.com/kb/838252/en-us
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Adding the organization level to one Role

Hi Experts,
                I have one role in PFCG, this role contains
some authorizations.
These role maintain the role.organization level values also.
now i want to include one organization level to this role
for example
                   company code----
> *
                   purchasing group------> *
                   division----
> *
now i want to add "Work center"
how can i include? is there any option is there?
Thanks is advance
sundar.c

Thanks for the Doc. This will be my Plan B.
I am still researching on How to Directly publish to Portal. I was able to do that from Query Designer using Publish to Portal and the report shows up as an iview in a PCD folder in the Portal. The Endusers have only Business Explorer Role and all they can see is the the Busineess Explorer tab of the Portal. So, I need to figure out a way to assign the iview to End user role.
In one of the threads,
Prakash Darji suggested
"The "publish into Role" from WAD saves to BI Roles which doesn't help you in web deployment, so I typically don't use this. I usually "Publish to Portal" and then will add my iView on the portal to a portal role that users are assigned to. This would make these iViews available to users on the portal. "
I am going to assign points for your suggestion though.

Crystal Enterprise Server Installation

Hi all,
My aim is to write a crystal report that will communicate with the BW Business Object and display the data from SAP BW Server and i want to publish the report through the web using the portal iview.

I download the Crystal DVD from http:
service.sap.com it contained three folders. They are...
1. Crystal Report(cr)
2. Crystal Enterprise(ce)
3. Crystal Enterprise SAP Add-On(ce_se_disc1)
For installing these software i needed three serial keys...
On running the installation i found "Get KeyCode" Button, which lead me to web page...
http://www.businessobjects.com/jump/sap/oem_bw35_sap/en/form.asp
On submitting the form from the above link i got the 3 serial keys.
But, When i tried to install the setups, it reported me an
error "Serial Key is invalid".
I am able to successfully install only the Crystal Reports(cr). The problem persists when i tried to install the Crystal Enterprise(ce) and addon.
I am looking forward for a solution about the above problem.
Points Guarenteed.
Thanks & Regards,
Maheswaran.B

Hi Sharad dixit,
As you can see the above posts, it clearly states the i am not able to install the crystal server on my machine because i donot have a key code.
Do you have the Key Code?
If you have please send it to me from the email id in my business card. ( Just click on my name in the left side of the post ).
If you are only intreasted in the crystal report document you can get it from the SDN or http://service.sap.com...
Regards,
Maheswaran.B

Portal Content Translation - Unable to see the changed iView name, desc etc

Hi Experts,
I am using Portal Content Translation to translate the name of iViews, roles, iview description etc from English to Spanish. I have followed the method mentioned in the below mentioned link:
http://help.sap.com/saphelp_nw04/helpdata/en/74/641640b7b6dd5fe10000000a155106/frameset.htm
I have successfully executed all the processes mentioned in the document. It includes:
Creating Worklists and add content
Generate translation data
Release for translation
Search worklist and define source and target language
Load worklist for translation
Translate worklist
Make worklist as translated
Publish translation
I am able to publish the publish translation.
The above document says that "Publishing a translation means that the translated text strings are written back to the objects to which they belong (for example, the translated title of a role to the role object stored in the Portal Content Directory). "
In my case I have translated the name, description of an iView. After publishing am I supposed to see the name & description of iView in Spanish in the same iView (source iView).
I have not created any target iView. Am I supposed to create any target iView?
I am unable to see iView name, description in Spanish.
Can you please let me know what is going wrong?
Thanks
Stuart

Hi Stuart,
please set the user's language in UME. You can do this in the personalization dialog (see SAP Library section <a href="http://help.sap.com/saphelp_nw70/helpdata/en/f8/64e93b3a612d52e10000000a11402f/frameset.htm">Setting Portal Preferences</a>. Assign the portal role "eu_core_role" to your user if you do not see the "personalize" link in the portal masthead.
In what language does the iview name appear if you do not select Spanish language?
Please check if the name of the iView appears in Spanish language in PCD after you switched portal language to Spanish.
Best regards,
Martin

UME: Regular Permissions - ACL Permissions

Gentelmen,
After reading recently published SDN article about WD security (Aug 31, 2004 -- https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/web dynpro security.pdf), one question araise for me: what is a connection (if any) between regular UME permissions (in fact, std. java permissions) and UME ACL permission?
Any thoughts?
VS

[ -closed with no resolution- ]

Adding query to Portal

Hi,
i'm trying to publish a Query on Portal. Once on the Content Administration i see some folders and roles, if I right click on a folder i can successfully create an iView with the query on it but i still can't see it on the Portal (there's already an iView on the folder and i do see it on Portal, my new created iView is just next to it but i can't see that one).
Do i need to add the iView on a role or something ? how can i do that ?
thx in advance
JP

On Portal Content Admin.. double click on the Role to publish on, select folder on Role, right click on the iView (on the content frame) select Publish on role -> Delta link.

Publishing BW 3.5 to EP 7.0 (2004s) as iView

Similar Messages

Maybe you are looking for