Publishing SCORM Productivity Pack files to Repository Explorer - Error

We have recently started using SAP Productivity Pack and completed an e-learning course using the product which we published as SCORM 1.2. I was able to author the file to the SAP Authoring tool and tested it which was all fine, however upon checking it into the SAP repository explorer it failed to check-in & gave this error
Cannot delete non-empty version group: /LMS/WBT/LMS_Instructor_Course_14Dec2011/ [rep=https://qrcentral.uat.qr.com.au:443/irj/go/km/docs/lms/, type=1, props={type=1, pubTypeGUID=43250496647044221, isVersioned=x, pathHash=-1660744237}]
java.lang.IllegalArgumentException: Cannot delete non-empty version group: /LMS/WBT/LMS_Instructor_Course_14Dec2011/ [rep=https://qrcentral.uat.qr.com.au:443/irj/go/km/docs/lms/, type=1, props={type=1, pubTypeGUID=43250496647044221, isVersioned=x, pathHash=-1660744237}]
     at com.sap.hcm.ls.shared.repository.control.implicit.ImpAuthMan.doDeleteObject(ImpAuthMan.java:1120)
     at com.sap.hcm.ls.shared.repository.control.AuthManagerImpl.deleteObject(AuthManagerImpl.java:1059)
     at com.sap.hcm.ls.shared.repository.exchange.CopyMan.cleanupObject(CopyMan.java:969)
     at com.sap.hcm.ls.shared.repository.exchange.CopyMan.cleanupInverseObjects(CopyMan.java:946)
     at com.sap.hcm.ls.shared.repository.exchange.CopyMan.cleanupCheckInObjects(CopyMan.java:902)
     at com.sap.hcm.ls.shared.repository.exchange.CopyMan.checkIn(CopyMan.java:210)
     at com.sap.hcm.ls.shared.repository.exchange.Publisher.checkInObjects(Publisher.java:267)
     at com.sap.hcm.ls.las.repository.explorer.wizard.steps.CheckInObjectsStep.workerThread(CheckInObjectsStep.java:85)
     at com.sap.hcm.ls.shared.util.swing.wizardfw.steps.ProgressWizardStep.run(ProgressWizardStep.java:209)
     at java.lang.Thread.run(Unknown Source)
I have not been able to correct this despite running SAP Note 1528650. I also know there was an issue in Prod Pack with the IMSMANIFEST.XML output which I also corrected but this has not helped the checking-in of the file to the Repository Explorer.
Thanks,

Hi Kristina, yes we resolved our issue with publishing Prod Pack content to the LSO repository. It was not the size of the files, rather an internal infrastructure limitation on the HTTP requests allowed per minute. We increased the limitation and since then have had no issues.
Regards,
Peter

Similar Messages

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

You can publish Adobe Presenter Projects to your Moodle LMS (this will work for many other LMS’ too.)Please follow the steps as mentioned in the blog linked below.
https://blogs.adobe.com/presenter/2013/08/step-by-step-how-do-i-publish-my-presenter-cours e-to-my-learning-management-system.html#more-6260
Regards,
Rajeev.

Adobe Cap 5.5 on Moodle - publish without SCORM, with .swf files

Hi,
My agency is using Moodle as a training platform and I need to publish my captivate training files to Moodle.    We track training completion through assessment reports.   I upload two different Adobe Captivate 5.5 training files.
(1)   the training portion with .swf (Raptivity) interactivity
(2)   the assessment portion - published in SCORM
I am able to successfully publish the assessment portion of the Adobe Captivate 5.5 in SCORM to Moodle.     However I am unable to successfully publish the training file.
I do not need to publish the training portion in SCORM so am open to suggesions of the best method to get the training file with Raptivity .swf files working on Moodle. When I publish the file it will work perfectly on our local network but does not work in Moodle. I have tried publishing the training portion (1) with and without SCORM without success.
Thank you for your help.
Note:   Please see my post 4-12-11.   I was unable to list files in the imsmanifest.xml as suggested in the response - and wonder if someone could provide further detail/ support with this suggestion.   How do I add the other tags?   Would someone be able to provide a screen shot of these steps?     Thank you.
Sandra

In the dialog inside Captivate where you set up the path to find the video file. By default, Captivate sets an absolute link, however, this path will be invalid if your video will be moved to another system (e.g. the LMS). You have to alter the default path to make it a relative path. The usual method is to copy the video file into the same publish folder as the Captivate SWF. (By default, Captivate doesn't move your video file for you at publish time.) If your FLV or F4V file is sitting in the same folder as your SWF, then you can just use the filename of the video file as your relative path when setting up the link in the dialog.
I also recommend you ONLY use lowercase filenames at all times for Captivate projects, including the published file and folders, and that you NEVER have spaces in files or folder names. These precautions will eliminate many baffling link failures when projects are moved from a Windows development environment to another webserver environment.

Publishing SCORM compliant files

I have a 256 slide presentation that I have been working on
for some time.
Up until recently I have been able to publish the captivate 4
file, including zipping the files and upload it to my LMS.
Unfortunately, CP4 has stopped ZIPPING the files. It is still
publishing the files into the designated folder, it just refuses to
ZIP them. (the optoin to ZIP files is checked). If I ZIP them
manually my LMS reports its not a valid SCORM file.
This occurs on difference PC with CP4 installed.
I tried to create a blank template, imported all the
necessary slides and the problem continues.
I'm running out of options and I really need to get this
published. Any suggestions or troubleshooting steps I can
take?

Uncheck the .zip box, publish, save, close, open the file
again, check
the .zip option, republish?
Otherwise, even a less-cool workaround, but copy all slides,
close file.
Open a new project, paste slides, setup publishing parameters
again, and
see if that does it?
Or perhaps there's some other setting that's overriding or
preventing
the .zip option? Any publish setting changes since it used to
work?
Erik
Robert Giroux wrote:
> Unfortunately, CP4 has stopped ZIPPING the files. It is
still publishing the
> files into the designated folder, it just refuses to ZIP
them. (the optoin to
> ZIP files is checked).
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

WaveStudio 7.12 (and/or Audio Pack for MP3 Support) product Help files

WaveStudio 7.2 product Help files (CTWAVE32.CHM) need to be revised to incorporate MP3 support, for those customers (like me) who have purchased the Audio Pack app for MP3 Support.
-OR-
Am I supposed to?just use the old WaveStudio 5.00.2 Help files (CTWave32.hlp)?
Also, there doesn't seem to be any way of uninstalling WaveStudio 5.00.2, unless I uninstall the whole suite of Creative MediaSource software... And that doesn't seem like very much fun at all... ? So, what, should I just leave WaveStudio 5.00.2 on the machine?

JRe: WaveStudio 7.2 (and/or Audio Pack for MP3 Support) product Help files?For anyone else experiencing this issue, the answer is:? Can't do it!? WaveStudio 5.00.20 can not be removed as a "stand-alone" application. The reason is, it's not listed as a separate program in Control Panel's Add or Remove Programs, and WaveStudio 5.00.20 has no Uninstall option.
Furthermore, WaveStudio 7.2 doesn't seem to overwrite the earlier version (it's still there and for some odd reason, it still works).
In order to remove the old version of WaveStudio, you must remove whichever Creative application that version of WaveStudio came bundled with.? Then, when you reinstall that application, WaveStudio 3.0 (or whatever iteration that application contained)?comes right back.
Therefore, the answer seems to be, you have to?li've with two versions of WaveStudio on the 'puter:? 7.2?and whatever earliest version the original bundled software?came with on the Soundblaster disc. Sad, but apparently true!? So, good day!? :smileytongue:

Manage Objects in Repository Explorer from Crystal Reports

I used to be able to Manage Objects from the Repository Explore without any issues. All of a sudden one day I get the following error when I click on Manage Objects:
" Action canceled
Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.
Please try the following:
Click the Refresh button, or try again later.
If you have visited this page previously and you want to view what has been stored on your computer, click File, and then click Work Offline.
For information about offline browsing with Internet Explorer, click the Help menu, and then click Contents and Index.
Internet Explorer "
Does anyone know how to fix this?
Thanks

Hey Annmarie Orlando,
When you try to manage your objects in your recent times have you made any changes to the Internet Explorer or any of the webpages.
What is the service pack installed on your machine.
Just for testing purpose try with Mozzila Firefox and try to run the page.
When you imported the repository objects did u faced any pop windows.
Turn off all your security settings and run it again .
Let us know if any?
Regards,
Naveen.

Bizarre error when trying to open .fla files in Windows Explorer

"Windows cannot find '(path of the .fla file INCLUDING the filename)'. Make sure you typed the name correctly, and try again. To search for a file, click the Start button, and then click Search." error message given when I click on any .fla file in Windows Explorer to open it in Flash 8 Pro (as I've ALWAYS done before). Flash opens but no file is opened in it. If I click the fla file a second time THEN it opens in Flash (which is already opened from the first attempt.). This never happened before. I have 2 more laptops that work fine (as did THIS Win XP-SP3 pc until about a week ago), ALL with Flash 8 Pro (1 laptop w/XP-SP3 - just like the main PC with the new 'problem'), 1 laptop w/Vista Ultimate SP2. Even compared registry entries from XP laptop side-by-side - no differences at all. Everything is literally 'word-for-word'. Also compared FileMap.xml - no differences. Reinstalled Flash (no success) then out of frustration reinstalled XP with full disk format (and then everything else all over again - took 3 days) - still no success. Files open from the Flash 'File\Open' menu no problem - just not from Windows Explorer anymore. Nothing is different than before (when everything was ok - same installed programs, apps, updates, exact same 'set-up' as far as Windows drivers, system settings, prefs etc goes. VERY bizarre!

As you know Flash 8 was a Macromedia product. They don't exist anymore - being absorbed by the all powerful, all seeing, all knowing Adobe Systems (sort of reminds me of the BORG on Star Trek - you know 'Resistance is futile').
I tried literally everything - to no avail. Since I did try everything - up to and including a complete HDD full format and OS reinstall (which only accomplished deleting several days of my life that I'll never get back) I have come to the conclusion that it must be something inherent in the program that only affects installations performed after 12/31/12.
My 2 laptops have no issues because the program has been on them for years and has never been reinstalled, but I would be willing to bet if I had to reinstall it on them I would start getting the same problem (since it's now past 12/31/12).
On 12/31/12 Adobe did something in a way 'similar' to CS2 owners by rendering the activation of CS2 products inoperative. I found this out the hard way after I had just reinstalled everything while trying to deal with this issue. I had to spend hours on the phone to finally get the news from 'Dave' in Indonesia that Adobe decided to just arbitrarily render their CS2 customers paid-for software obsolete and inoperative! (Out of fairness they DID provide 'replacement' apps that don't require activation - thus avoiding MEGA lawsuits).
Anyway - I'm just saying that software makers can build anything into their product, including date specific limitations without the consumer ever being aware of it.
With the exception of this issue it otherwise works fine, and I guess I'll just have to deal with it from now on by dbl-clicking on Fla files TWICE instead of once - otherwise affectionately known as 'quadruple-clicking', (but if you count closing the error window then it's 'quintuple-clicking').
I don't mind being proven wrong - so if somebody out there knows what is going on here (besides my theory of software developers time limitations resulting in complete world domination) feel free to reply. I'll get an email telling me someone replied and I'll come to this post and have a look.
(suggestions to reinstall will be ignored - been there, done that)

Create a file system repository

Hi all,
when I create a file system repository in the following solution:
System Administration → System Configuration→Knowledge Management→Content Management→Repository Managers → File System Repository
There I input the name and the URL which is available on the server.
Then I go to Content Administration → KM Content to check the content of the repository I have created , I can find the folder in the first level directory, but why I can't find the text file I create under the second level .
such as: URL C:/kmtest
        on the server   C:/kmtest/1
                             C:/kmtest/1/1.text
(I can see the folder 1, but when I click this fodler on the portal , I can see nothing.)
When I use System Administration → Monitoring → Knowledge
Management → Component Monitor to check the status of the repository , I find it was not in green light .
Then what is the reason ? Thank you if you can help me !

Check permissions of that folder give full permissions.
Create a File System Repository
You map a network drive from the Portal server and create the file repository in the Portal.
Procedure
To map a network drive from the portal server
1.     Log on to the Windows Server of the Portal.
2.     From the Microsoft Windows Start menu, open Windows Explorer.
3.     Choose Tools  Map Network Drive.
4.     Specify the drive letter for the connection (say V :).
5.     In Folder, enter the path of the shared folder, (
kmtest)and choose Finish.
Create the File Repository in the Portal
1.     Choose System Administration  System Configuration  Knowledge Management  Content Management  Repository Managers  File System Repository.
2.     Choose New.
3.     Enter a prefix that describes your folder.
4.     Enter the value of the drive letter you mapped previously with a forward slash.(/kmtest)
5.     (optional) Select the checkboxes for layout and properties from Repository Services.
6.     Choose OK.

C:\Program Files (x86)\Internet Explorer\iexplore.exe

IE continually becomes unresponsive.
Problem description detailed below,but solution in action centre wont download.
Can anybody help !
Thanks
Description
<dir>
Faulting Application Path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
</dir>
Problem signature
<dir>
</dir>A problem caused this program to stop interacting with Windows.<dir></dir><dir></dir><dir>
Problem Event Name: AppHangXProcB1
Application Name: iexplore.exe
Application Version: 8.0.7600.16385
Application Timestamp: 4a5bc69e
Hang Signature: 9c29
Hang Type: 32
Waiting on Application Name: iexplore.exe
Waiting on Application Version: 8.0.7600.16385
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057
Additional Hang Signature 1: 9c29812c68be0254c5ffd3914cdd69cd
Additional Hang Signature 2: 72dd
Additional Hang Signature 3: 72dd670eacc23651bdca3f7f9c4e7417
Additional Hang Signature 4: 9c29
Additional Hang Signature 5: 9c29812c68be0254c5ffd3914cdd69cd
Additional Hang Signature 6: 72dd
Additional Hang Signature 7: 72dd670eacc23651bdca3f7f9c4e7417
</dir>
Extra information about the problem
<dir>
</dir><dir></dir><dir></dir><dir>
Bucket ID: 646587220
</dir>

Unfortunately your post is off topic here, in the MSDN Subscriptions feedback forum, because it is not feedback regarding the MSDN Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.) who
happen to post their question in my forum, but please don’t ignore it. The links provided below I’ve collected to help with many issues we’ve seen.
For technical issues with Microsoft products that you would run into as an end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an IT professional (like more technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the MSDN Subscription, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots of the issue
(do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really have no idea where to post this question, then you shouldn’t have posted here, because we have a forum just for you! It’s called the ‘Where is the forum for…?’ forum and its here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Please review the topic of the forum you’re posting in before posting your question. Moving your post to the off topic forum.
Thanks, Mike
MSDN and TechNet Subscriptions Support

File repository server error: failed to put the file to file server

Hi,
Am trying to export relational and OLAP universe to repository and getting an error.
Am using Universe Design Tool and product version is BI 4.0 SP 5
When I create a universe and export it for the first time it get exported successfully.
However I tried to export same universe after making few changes, getting below error
File Repository Server error: Failed to put the file to fileserver: frs://<FRS Location>/Universe_Name.unv already exists
Is anybody faced such issue?
I suspect it is a configuration issue/product bug.
Your thoughts are highly appreciated.
Regards,
Vinesh

Hello Vinesh,
There is a workaround mentioned in the following KBA:
1309859 - Error: WIS 00501 Universe not found when viewing Documents
Please have a look.
Thanks and regards,
Madhumitha

Production Portal is displaying "Internet Explorer can not displayed the

Dear Experts,
Production Portal is throughing "Internet Explore page can not be displayed the webpage" while accessing the .par file application.
In Aceptance portal after 2-3 minutes its displaying output. But in production it is taking morehtan 15minutes and finally, it is throughing "Internet Explorer page can not be diaplayed the webpage". I asked the BASIS to chek the Timeout parameter and they said, it maintained for 10minutes. And also they are not ready to increase Timeout parameter morthan 10minutes.
Could you please help, how can i solve my problem?
Thanks in Advance.
Regards,
Vijay.

Hi,
Thanks for the rsponce. The application is working fine from the past 2years. We haven;t done any changes in the application. Yedterday we done same activity, but this time it has taken morethan 40minutes process. After 40minutes it displayed "Internet Explore cannot display the webpage" again. BASIS people are telling, in backend control is staying around 260 seconds. After that control is going to portal and Java code is taking morethan 10minutes to execute the remaining steps. I have seen Java code, but nothing is there. Just it is displaying the data from backend.
Could you please help me, how can i trace this problem. And also not understanding where the control is going.
Thanks in Advance.
Thanks & Regards,
Vijay.

Inability To Publish (SCORM or non-SCORM)

Hi,
I have a topic file consisting of 35 slides, or so, with an overall file size of 4MB. I cannot publish this as HTML, or as a SCORM 1.2 file. I have removed all unused slides, done a save and a system reboot, but nothing is working.
Any help you can lend would be appreciated.
Henry

I suppose you saved it on your desktop?
If this is not working, first we should find out if it is the file that is corrupted or Captivate itself.
Could you try to create a small file, add one or two question slides and see if you can publish? If that works it could be the file that is corrupted. Then try to copy slides to a new file with same resolution, not all at once, because you'll be looking for the slide or object that is corrupt. Do you have text animations?
Lilybiri

Item's mark in Repository Explorer

Dear Experts
You can see the two marks in the attached file. But,I don't know the mark's meaning of each item in Repository Explorer.
If you know, could you tell me each item's meaning?
Best regards
Ryota Ichida

Dear Horst
Thank you for replying my question.
But, I can't understand the icon's type by the information in window appearing on mouse-over.
Please tell me how to understand the icon's type(Association or Node)?
*Item Information
*Party Information
Best regards,
Ryota Ichida

While generating a crystal report can we edit database files in field explorer ?

Hi,
while generating a crystal report can we edit database files in field explorer (at middle can we edit database fields)
Regards,
Mahendra

Wrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT

I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as I have associated .pdf files with adobe reader. My operating system is windows 7.
When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'. I have not changed my security settings (Tools, Internet Options, security).

Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Publishing SCORM Productivity Pack files to Repository Explorer - Error

Similar Messages

Maybe you are looking for