Puedo hacer una red con el airport extreme y con el airport air??

Tengo el airport extreme y el airport air como puedo configurar una red para que los dos funciones teniendo el airport extreme conectado al modem

Debes bajar la aplicación Airport Utility en la Mac, iOS si tienes o PC para mejor provecho de las funciones.
Para la configuración mire estas instrucciones:
En los siguente link puedes ver como extender una red:
Alambrica
http://support.apple.com/kb/HT4145?viewlocale=es_ES
Inalanbrica
http://support.apple.com/kb/HT4259?viewlocale=es_ES

Similar Messages

¿Como puedo hacer una compra por depositos bancarios?

¿Como puedo hacer una compra por depositos bancarios? , quiero comprar por internet un ipod touch , y necesito hacer los pagos por deposito bancario , como puedo realizar la compra , Ayuda porfavor , GRACIAS

Hola.
Si la tarjeta USB de adquisión de datos es de National Instruments,
simplemente tienes que instalar el driver NI-DAQ mx más reciente y
podrás utilizar la tarjeta.
Una vez que esté instalado el driver NI DAQmx (el cual puedes bajar de
www.ni.com/download), pues programar el uso de la tarjeta con LabVIEW o
con algún otro lenguaje de programación. Lo más fácil será
utilizar LabVIEW, ya que viene con muchos ejemplos de cómo programar
diversas operaciones utilizar DAQmx.
LabVIEW tiene que estar ya instalado cuando ejecutes la instalación de NI DAQmx.
Buena suerte.
Alejandro

I am extending my airport extreme by adding an airport express. I had no problem setting it up and got green lights but now I cannot get on either because it says it is a self assigned IP?

I am extending my airport extreme by adding an airport express. I had no problem setting it up and got green lights but now I cannot get on either because it says it is a self assigned IP?

i am extending my airport extreme by adding an airport express.
Does this mean that you are connecting the AirPort Express to the AirPort Extreme using a wired Ethernet connection....or....are you connecting the AirPort Express to the AirPort Extreme wirelessly?
but now I cannot get on either because it is a self assigned IP?
I suggest that you first concentrate on getting the AirPort Extreme working correctly. Power off the modem and both the Extreme and Express, wait a few minutes, then power up the modem and let it run a few minutes. Then, power up the AirPort Extreme and check the network for proper operation. Leave the AirPort Express off for now. Report on your results.
We need to know what operating system you are using on your Mac or PC in order to provide more troubleshooting help.
If you have a Mac and do not know what operating system you are using, click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X version number that you see there.

How to Install Airport Extreme Utility Software on MacBook Air

Here's my dilemma: I have an iMac G5 which I use with Remote Disk to install software on my MacBook Air. But when I try to use my new Airport Extreme install disk, I get an error telling me the software cannot be installed over a network. If I try copying the package, I just get an alias (and the original can't be found: voodoo!).
How do I get the Airport Extreme software on my MacBook Air???? Why is there no download link provided?
Any help gratefully received.

Nina Tovish wrote:
How do I get the Airport Extreme software on my MacBook Air???? Why is there no download link provided?
Here's one:
http://support.apple.com/kb/DL839
That version (5.4.2) won't work with the very latest AirPort Extreme or Time Capsule units, which need version 5.5.

I have a new Airport Extreme and an old airport express. I am getting an amber light on the new Extreme and a green light on the Express. I have internet no problem but the status light is blinking amber

I have a new Airport Extreme and and old airport express. I am getting an amber status light on the Extreme and a green light on the Express. The Extreme is blinking amber all the time.
I have internet and everything seems to be working.
I have reset and pulled the power cord on both the extreme and the internet block
How do I make it Green?

If things seem to be working OK, but the amber light is flashing......the AirPort Extreme has a message for you. To see what that might be......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon
Click on the amber dot in the small window
It might be a message that a firmware update is available for your AirPort Extreme.

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... What am I doing wrong?

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!

The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
Apple's instructions for WDS are here if you want to give it a try.
http://support.apple.com/kb/HT4262
It is possible that it might work. Keep us posted on your progress
Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points.

Airport extreme not showing in airport utility

I am running osx10.7 server and am attempting to port remap my airport extreme. When i open airport utility, it says that there are no airports in range, when i'm actually connected to an airport via wifi. I cannot figure out what the issue is. If someone can help me fix this issue and instruct me how to remap my rounter so i can use it to host websites and the like, it would be greatly appreciated.
Thanks a lot for your help in advance.
Zach Russell

grimstad wrote:
My Airport Extreme is working just fine, but I want to add Airport Express. The first step in my manual says to open Airport Utility, but I get the message "Airport Utility was unable to find and AirPort wireless devices.
This may happen if your system accidentally switch the radio band.
Try this first:
Disable WiFi in the Menu Bar
Enable again
Check if the Airport Extreme shows up in Airport Utility
If so, choose the Airport Extreme
Click Manual Setup
On there:
If possible disable "Guest Network" (it cause trouble by switching constantly radio band for user convenience)
Give the 5GHz wireless a dedicated name
If you have no 802.11g (iPhone, iPod Touch) in the network:
Set radio mode to: 802.11n only (5GHz) - 802.11.n only (2.4GHz)
If you need 802.11g
Set radio mode to: 802.11n only (5GHz) - 802.11b/g
You will reach these settings by holding option key (alt) while clicking on the Radio Mode pulldown.
Click Apply and wait for the Extreme to come back
After that,
check that your 5GHz capable systems use only the 5GHz name (SSID) when joining wireless.
For that, delete the 2.4GHz name (SSID) from the list of known networks in Systems Settings - WiFi - Advanced
Move the preferd network in the List at first place.
Rejoin wireless
Lupunus
PS ... to configure the Express, best connect a laptop via Ethernet to them. This eases the process a lot.

Adding new airport extreme to an existing airport express network...

i currently have a home airport network comprising two airport express units; one attached to the cable modem in the bedroom and the other downstairs in my study (extending the existing network and feeding a shared USB printer and airtunes speakers). i've recently bought an airport extreme, to improve network performance. i also plan to add a NAS in the next week or so.
ideally i'd like to situate the new airport extreme in the study, as i don't want to have to keep the NAS in my bedroom!
my question is this, if i add the new airport extreme to the existing airport network, will i see the benefit of the 802.11n connection, or should the extreme be set up as the primary base station?

... will i see slower transfer speeds (than if it was connected to the extreme) to / from the NAS when accessing it wirelessly from elsewhere in the house?
No. The transfer speed will be limited by the slowest connection, which is almost certainly your wireless connection speed.
If you buy a switch, buy a gigabit switch. Not because a slower one will limit your transfer speed, but because the Extreme is Gigabit and any newer equipment is likely to be as well. The advantage would only be relevant to the wired LAN.
The Express's Ethernet is not Gigabit but there is no reason for it to be, since it cannot connect to anything other than a slower wireless connection anyway.

Difference between AirPort Extreme base station and airport express

What is the difference between AirPort Extreme base station and airport express

Please see this Apple comparision document for details. Post back on any specific questions including your specific requirements.
http://www.apple.com/compare-wifi-models/

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

10.4.8 and Airport Extreme - wireless con. not showing up on boot up

Ever since I installed 10.4.8, in order for my 2WIRE connecttion to show up in the "Internet Connect" drop menu on my desk top, I have to check off the "Internet Robustness" setting first, and only then will my airport extreme locate 2WIRE and connect.
I've engaged - and disengaged to see if it made any difference - the preference for "enable interference robustness in the Airpor>options pane. Made no difference. It's not a huge deal, but I wonder why the change. Any ideas?

Could be that a combination of the last OSX 10.4 security update and also
the AirPort Extreme updates have some effects on these subtle or not so
subtle differences in how the system works, now. Mine occasionally won't
work correctly with my desktop iMacG4 unless the Robustness setting is
turned on; and I have the nearby option to choose a wired connection
through the AEBS on the wall by my desktop computer, too. My iBook
seems to mostly just work; unless there is an AEBS or IP/DSL issue.
That kind of problem never used to happen and I'd just lose the wireless
without any understandable reason; at least now I know interference rob-
ustness setting appears to make a difference when it unexpectedly quits,
I have at least one more thing to toggle to see if I get it back; before I
start in on the DSL modem or other settings inside the AirPort Setup Utility.
The last thing if it does not work, is unplug the AEBS and/or ADSL unilt.
But, if you use a small straightened paperclip in the reset hole, you'd
have to check and rechoose settings in the AEBS; as it goes default.
Seems to me, once I uploaded to the AEBS from the iBook that runs
OSX 10.4.x, it was acting funky; but for awhile since another update
was done, it seems to work OK. Since the odd behavior messed with
the iMacG4 (10.3.9) I more often use it via ethernet from AEBS. The
iBook sees the wireless better than the iMacG4. Since both of mine
have Extreme wireless cards, I changed the AirPort's 802.11 to /g only.
That helped a bit and the desktop Mac on wi-fi doesn't drop as much.
I see no real answers to "fix" this; but there is some incidental evidence
that some newer spec wireless base stations may be coming soon to
an authorized reseller or through the authentic online source. Perhaps a
new answer is out there, in new hardware and software. I hope an update
will fix these little issues; I've had one AEBS for about three years and
it used to just work fantastically with OS 9.2.2 and standard airport, with
dialup. Then I brought in Jaguar in the machines I had then, and Panther;
plus Tiger, and now two other Macintoshes plus a spare AEBS.
Cross fingers?!

Setting up airport express with airport extreme 802.11n with Airport Utilit

Hi,
I'm having trouble setting up my airport express(AX). Having recently bought the new Airport Extreme (AE) basestation, I can't figger out how to set it up to recognize the AX and allow me to stream airtunes. Previously I had the AX setup fine, but once I installed the AE, it no longer was recognized.
After resetting the AX, the airport Utility recognizes the AE and the AX as basestations, but I don't want to have to switch back and forth from wireless networks everytime I want to listen to music in another room. Airport Admin seemed to have been wiped out when I installed the AE, so any documents I've found on the Apple site refer to AA and not Airport Utility.
HAs anyone set up their AX on the new AE basestation?
thanks!
Rene

I am currently experiencing the same issue, except that I cannot for the life of me get the AX to:
1) Stop flashing yellow - numerous resets -soft to default.
2) The airport utility will not recognize it.
The airport utility sees the AE no problem, I got that up and running after a few restarts and am now able to log on to the network with my laptop.
I am new to Mac's and this is the 1st time I have tried to set up a network with one, I was excited about being able to use the AX to play my iTunes through the stereo in the other room and to hopefully use it to connect my X-Box to the internet. But I am starting to think that this is either above my skills or a fruitless endeavor. Any help would be most appreciated!
Thanks
Fairbanks

New airport extreme not recognized by airport utility

I've got a 2011 MBP. Right now I have an older Airport extreme up & working with my Time Warner cable modem. When I tried to connect my new 802.11n airport extreme, I couldn't get it to stop blinking amber. First the airport utility told me that I didn't have a valid IP. The second time, after unplugging everything (cable modem & plugging it back in & resetting the airport, the utility couldn't find the router at all.
The manual says contact your cable company, but I got someone who's only solution was to go to system preferences/network & see if "airport" was checked. The second time after specifically asking for someone who understood macs,I got a bit more useful info, but it still doesn't work. I've unplugged everything countless times, reset the airport extreme, renewed the DCHP twice, restarted the computer & swapped out the ethernet cable. Still no luck. Any ideas?

http://support.apple.com/kb/ht3728

Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

Network set up using airport extreme, time capsule and airport express

I have searched for relevant answers but can only find different bits here and there.
My set up is as follows:
I have a Linksys wireless router running a stable wireless network for the other computer users in the house and wish to create an extended, additional network using airport extreme connected to the Linksys by ethernet to create the network and then time capsule close to my Mac Mini on my desktop and airport express at the other end of the house to try and extend the range of the network.
I have been trying for 4 days to set this up but without success. I have tried all of the options mentioned in different posts, using WDS, extending a new network etc. I can get connection between the three devices but monitoring on iStumbler there appears to be little improvement in the strength of the signal, iStumbler also shows the time capsule dropping it's signal totally every 10 or so seconds for a few seconds and then I get a positive signal strength for another ten seconds or so.
Can anyone help, it is driving me insane. I am a recent convert to apple computing and have been hugely impressed with all products until now. The claim that the set up of these wireless products is simple seems to be very exaggerated.
I am happy to provide any relevant system or hardware information.
Thanks in anticipation.

I have an AirPort Extreme acting as a wireless base station, connected to a BT router by ethernet.
Then the correct setting for Connection Sharing on the AirPort Extreme would be "Off (Bridge Mode)".
If I set Connection Sharing to "Share a public IP address", I'm told that: "The DCHP range you have entered conflicts with the WAN IP address of your Apple Wi-Fi base station"
Exactly. You have two routers....The BT device and the AirPort Extreme in series with both of them trying to act as the "main" router when you configure the AirPort this way. That won't work.
Only one can be the main router, and it must be the BT device in your setup. So, the AirPort Extreme....and any other AirPorts on your network must be setup to work in Bridge Mode to allow the network to operate correctly.

Puedo hacer una red con el airport extreme y con el airport air??

Similar Messages

Maybe you are looking for