Pull compressed file (.gz format) via FTP and place on Application server

Hello!
Greetings.
We have a requirement where a compressed file in the format *.gz is to be pulled via FTP and saved to the application server after extracting.
I searched the forums and found options to pull text or XL files, but nothing about pulling a compressed file. I wished to know if there is any process for the same. After pulling the file, it is to be saved to Application server after extracting. My doubts are as below:
1. How to pull a *.gz file via FTP (Need batch processing)
2. Can I extract and rename th file before saving it to applciation server? Or I need a temporary location to place the file before extraction?
Any inputs are appreciated.
Thanks,
Shishir.

Hi Sandra.
Thanks for the confirmation.
There is a change is the requirement. We need to Poll the FTP server for the file for the duration of one week every month.
When the file is found, we are to take the *.gz file, extract and put on the application server.
My question is how do we poll the application FTP server? I searched the forums and found a few threads that say that an FTP adapter is to be setup for polling the FTP server and then we can schedule it using u201CAvailability Time Planningu201D.
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
I wished to know if that is the only way to approach this requirement.
Any help is appreciated.
Thanks and Regards,
Shishir.
Edited by: Shishir Kinkar on Apr 26, 2011 11:07 AM

Similar Messages

Problems uploading big files via FTP and downloading files

I've been having problems uploading big files like video files (.mov 12MB) via FTP to my website (small files like .html or .doc I can upload but it takes longer than usual). I'm using Fetch 4.0.3. as FTP. Same problems when downloading files via Bit Torrent. I recently moved to Spain, since then I seem to have the problem. But my roommate with a PC doesn't have that problem. Connecting to internet with Ethernet cable also didn't resolve the problem. I also tested it from a Starbucks coffee connecting to Internet from there but still couldn't upload that 12MB file to the FTP. The security settings for firewall are set to "allow all incoming connections". I didn't change any of my settings so I don't know what the problems could be. I have a MacBook Pro, Mac OS X (10.5.7) Any suggestions? Thanks!

Welcome to Apple Discussions!
Much of what is available on Bittorrent is not legal, beta, or improperly labelled versions. If you want public domain software, see my FAQ*:
http://www.macmaps.com/macosxnative.html#NATIVE
for search engines of legitimate public domain sites.
http://www.rbrowser.com/ has a light mode that supports binary without SSH security.
http://rsug.itd.umich.edu/software/fugu/ has ssh secure FTP.
Both I find are quick and a lot more reliable than Fetch. I know Fetch used to be the staple FTP program, but it grew too big for my use.
- * Links to my pages may give me compensation.

Hey, I have Final Cut Express 4.0.1 and a JVC everio camera, whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there, please help !

Hey,
I have Final Cut Express 4.0.1 and a JVC everio camera.
Whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there,
please help !

FCE 4.0.1 can only capture DV/HDV which is produced by cameras using Mini-DV TAPES and cameras shooting AVCHD which is a high definition format.
If your camera shoots standard definition on Memory Cards, DVDs or Hard Drives it will not work in FCE.
What is your camera's exact model name and number?

How Standalone OC4J and the Oracle Application Server linked to each other

Hi ,
Please let me know what is the relation between a Standalone OC4J and the Oracle Application Server ?
In my application The Oracle Application Server is installed in C drive and there is a Stand alone oC4j .
Please tell me how they are linked to each other .
Thank you .

It depends on your need and what features and functionality of Oracle Application Server you are interested in. Note that OC4J is a component of Oracle Application Server that can run as a standalone component or within Oracle Application Server. Question #6 in earlier mentioned FAQ document states:
OC4J standalone is J2EE 1.3 compatible (1.4 and 1.5 too in later releases of OC4J) and is able to be used in both development and small scale production environments. OC4J standalone provides its own inbuilt HTTP/S listener to allow clients to execute Web applications that it has deployed. Application deployment and server configuration of OC4J standalone is performed by the manual editing of a simple set of XML files.
For large scale enterprise deployments, the Oracle Application Server product is likely to be more suitable with its comprehensive feature set including Oracle HTTP Server, process monitoring and management capabilities, and its configuration and management console.
So if you are happy with what you see in standalone OC4J and scalability isn't an issue for you, you can stay with standalone OC4J and don't need to move to Oracle Application Server.
PS: If you do decide to use OC4J that's embedded with Oracle Application Server, you can't move your standalone OC4J inside Oracle Application Server. You will have to reconfigure embedded OC4J again (as you might have done with standalone OC4J) and redeploy your applications.
Hope this helps.
Thanks
Shail

How to set the keepalive timeout and nativepoll in application server 8.2

Hi,
I would like to know how to set "keepalive timeout" and "nativepoll" on application server 8.2.
Thanks,

These parameters were set in Application server 7 as per the following documentation:
http://docs.sun.com/source/817-2180-10/pt_chap4.html
However I am not able to find any documentation with regards to application server 8.2
Please advice..
Thanks

Netweaver administration and SAP Web Application Server r the same?

Hi All,
I am a Basis Consultant & new to Netweaver,..
I am interested in Netweaver administration..
1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
Thanks in Advance ,
Malti

Hi Malti,
You must first download and read this document and then read 'help.sap.com' for what is netweaver.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
The above mentioned document is a crisp guide to what is WAS.
Further I got this from the sdn/netweaver webpage
SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
You have lots of reading to do now.. hope that helps
Regards,
Siddhesh

How Can I run My Forms And Reports On Application Server 10 g Release 3

Hi Everybody
i need to learn steps to configure forms and reports on application server 10g release 3 pls help , i am a beginner

hi,
I'm also need to know "How to run My Forms And Reports On Application Server 10 g Release 3". So if u know the steps then please share with me .....

How to start and stop Oracle Application Server from ANT

How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
Mani

Hi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl

Rename file name & format using ftp sender

Hi all,
This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
client format is : SAP_Order.txt (Pervious file name).
We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
How can i achieve this requirement?
Can please suggests me solutions ASAP.
Best Regards,
satya,

Hi,
if your requirement is to pick the existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
then its simple...
use two receivers instead of one , one for point to target and other for sender itself... (second receiver is for changing the file name format....)
Hope the above understanding is correct...if not provide more details of your requirement...
HTH
Rajesh

File Upload in BSP Applications and store in Application server

Hi we have requirement to store the attachments from BSP application into the external/internal storage space connected to application server.
I search for weblogs and all talking about <a href="http://help.sap.com/saphelp_me21sp2/helpdata/en/eb/8c683c8de8a969e10000000a114084/content.htm">File Upload in BSP Applications and store in MIME Repository</a>.
But our requirement is upload and store(no need to read the file content) attachments from BSP page into file server, and then make a link back in BSP page to open.
I know we can handle documnets in R/3 using DMS, but our system is SRM.
Please give a suggestion and solution.
Thanks,
Giri

Hi,
I faced a similar problem some time ago (uploading a file via BSP, storing it to the application server and then linking the archived document to a business object.
Here is the coding I used:
when 'SubmitUploadFile'. "OnInputProcessing
    DATA: data_fileupload TYPE REF TO CL_HTMLB_FILEUPLOAD,
          l_filename type string,
          l_archiv_doc_id type SAPB-SAPADOKID,
          l_content type string,
          l_file_ixos(100) type c value '/transfer/PV2/aus/IXOS/',
          l_file(200) type c,
          tbl_bin TYPE STANDARD TABLE OF tbl1024,
          wa_bin type TBL1024,
          l_xstring type xstring,
          l_arc_doc_id type SAPB-SAPADOKID,
          l_doctype type TOADD-DOC_TYPE,
          l_filename_e type DRAW-FILEP.
upload the file from the BSP web interface (e.g. file C:TempSUTestPDF_SU.pdf)
    data_fileupload ?= CL_HTMLB_MANAGER=>GET_DATA(
                                       request = runtime->server->request
                                       name    = 'fileUpload'
                                       id      = InputFieldFileUpload
    IF NOT data_fileupload IS INITIAL.
      l_filename         = data_fileupload->file_name.
      l_content      = data_fileupload->file_content.
      l_content_type = data_fileupload->file_content_type.
    ENDIF.
The uploaded file is returned as XSTRING, so we have to convert it to BINARY
(or STRING alternatively)!
    l_xstring = l_content.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        BUFFER          = l_xstring
        APPEND_TO_TABLE = 'X'
      TABLES
        BINARY_TAB      = tbl_bin.
split path for storing the file to the application server
    l_filename_c = l_filename.
    CALL FUNCTION 'CV120_SPLIT_PATH'
      EXPORTING
        PF_PATH = l_filename_c
      IMPORTING
        PFX_FILE = l_filename_e.
write the uploaded file to the application server
    l_filename = l_filename_e.
    concatenate l_file_ixos l_filename into l_file.
    open dataset l_file for output IN LEGACY BINARY MODE.
    loop at tbl_bin into wa_bin.
      transfer wa_bin-line to l_file.
    endloop.
    close dataset l_file.
store the uploaded file on the IXOS-archive
    l_doctype = l_content_type.
    CALL FUNCTION 'ARCHIVOBJECT_CREATE_FILE'
      EXPORTING
        ARCHIV_ID                = '2T'
        DOCUMENT_TYPE            = l_doctype
        PATH                     = l_file_arc
      IMPORTING
        ARCHIV_DOC_ID            = l_arc_doc_id
      EXCEPTIONS
        ERROR_ARCHIV             = 1
        ERROR_COMMUNICATIONTABLE = 2
        ERROR_UPLOAD             = 3
        ERROR_KERNEL             = 4
        OTHERS                   = 5.
link the archived document to the business object DRAW
    CALL FUNCTION 'ARCHIV_CONNECTION_INSERT'
      EXPORTING
        ARCHIV_ID                   = '2T'
        ARC_DOC_ID                  = l_arc_doc_id
        AR_OBJECT                   = 'DRW'
        OBJECT_ID                   = g_object_id_arc
        SAP_OBJECT                  = 'DRAW'
       DOC_TYPE                    = l_extend
     EXCEPTIONS
       ERROR_CONNECTIONTABLE       = 1
       OTHERS                      = 2.
Remark: It´s vital to convert the uploaded file from XSTRING to BINARY. Otherwise the file cannot be stored/archived properly.
The archived document can then be displayed by inserting the (IXOS-web client-)link to the BSP page (e.g. http://193.228.208.78:4060/archive.dll/get?arc=2T&doc=44439F1B4F701E65E1000000C1E4D00A).
Hope this helps!
Regards,
Ulli

HT3415 Ive formatted my iMac and now the applications disc will not install on my computer

Ive formatted my iMac as I am selling it on and now the applications disc will not install on my computer.

Isaac, Two knowledge base articles that may be of further help are:
Reinstalling Mac OS X 10.6http://support.apple.com/kb/PH6606
and Reinstalling Application Software that came with Mac OS X 10.6
Be sure to read them through if you have any further problems.
Regards,
Ralph

Where is the binary data of this icon stored and retrieved from Application server?

Hello guys,
Today I observed one phenomenon and could not explain it per my knowledge.
I have one url which points to an icon in application server:
https://<host name>:44301/sap/public/bc/ur/nw5/themes/sap_corbu/common/libs/Icon/SuccessMessage.gif
I could successfully open it via chrome:
and after that I could see an entry in ICM server cache. Everything works perfectly.
Then I tried to check this icon in mime browser in SE80. To my surprise, the folder /sap/public/bc/ur/nw5/themes is empty.
However, the ICM cache shows that there is a subfolder called "sap_corbu" under "themes" folder. But why I cannot find it in mime browser?
Then I write a report to retrieve the binary data of icon via CL_HTTP_CLIENT, and clear the ICM buffer via tcode SMICM.
I expect this time some database table will be queried to load the content of the icon, since now the buffer is not available.
To my surprise again, in SAT no database table is involved.
So now I am confused: since I have already cleared the ICM server cache, where does the icon binary data come from when I run the report to access the icon?
Best regards,
Jerry

Hello guys,
one colleague today told me that there is a zip file "ur_mimes_nw7.zip" in MIME repository /PUBLIC/BC/UR/ur_mines_nw7.zip. I download it locally and unzip it and indeed find many theme folders including sap_corbu folder and its resource files. So I guess there must be some logic done in web application server which will unzip this archive file and put each theme folder to the corresponding folders in application server. I would assume those logic are done outside ABAP stack side, this is the reason I cannot find any hint of them in ABAP backend via tcode SAT even I clear both client and server side cache.
Best regards,
Jerry

Converting binary data into pdf and placing into application server

Hi Friends,
I am able to get PO details in binary format and then using GUI_DOWNLOAD with file type with 'bin' and file name with 'sample.pdf' extension , got PO in pdf format.
But i need to get with pdf extension in application server without using GUI_DOWNLOAD.
Is there any functional modules for it?
With Warm Regards,
Madhu!!!

Hi Madhu,
Check this code.
*& Report ZSPOOLTOPDF                                                 *
*& Converts spool request into PDF document and emails it to           *
*& recipicant.                                                         *
*& Execution                                                           *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on      *
*& screen                                                              *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
       to sap-spool
       spool parameters   %_print
       archive parameters %_print
       without spool dynpro
       and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
    PERFORM convert_spool_to_pdf.
    PERFORM process_email.
    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.
    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
ENDIF.
      FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
      FORM get_job_details                                          *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
      FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
      FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
      FORM send_email                                               *
--> p_email                                                       *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod        = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
      FORM delete_spool                                             *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Hope this resolves your query.
<b>Reward all the helpful answers.</b>
Regards

FTP program executed on application server

Hi all,
        my goal is to send a file from HOST (AS400) to a SAP using a batch program in order to see it from AL11 transaction.
I found the standard program RSFTP* that use Function Module FTP*.
In particular If I execute the standard program RSFTP003 online (on presentation server) it works right but If I execute it on batch it doesn't work with error:
                    RFC to program SAPFTP failed E205(04).
Is this the only way to reach my goal?
Do you have any suggestions?
                          Gino

Hi,
If you are willing to Place the File first on your desktop and then next to AL11 means
1) goto SXDA_TOOLS Transaction code
2) Provide the Following details
Object Type : DXPROJECT
Program Type: BAPI
Program/Method: CREATE
3) Click on Copy Button
4) Select the Source as Presentation Server
     a) Select the File where you saved in your Local machine
5) Select the Target as Application server
     a) Check the check box Remote Server
     b) Select the File type as Physical
     c) In File name give /usr/sap/SSD/DVEBMGS00/work\Your file name (This the Server path
Where the file is going to save)
6) Click on Continue
Go to AL11 and check whether the File has been create in the following path /usr/sap/SSD/DVEBMGS00/work
Provide this path in the Communication channel path when you select the Transport Protocol as NFS and you place the file in AL11 directory.
Regards
Seshagiri

Sending output of Reports to FTP in 10g R2 Application Server

Hi All,
Hope every one would have seen these lines in reportsserver.conf file in $ORACLE_HOME/reports/conf file.
*" <destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">*
**
*</destination> "*
Is the above lines really meant for spooling the reports output and FTP the same to another PC.
I have a requirement of spooling the reports output to clients PC. We are running reports server in Linux, as the reports directly gets saved into the server folder. We want the file to ported to a windows PC automatically. Though we have accomplished this by configuring SAMBA, it requires a additional configuration on the server side.
Seeing the above lines in reports server conf file i thought many in forum would have given a try and wanted to know the feedback on the same whether my requirement can be met with this, if ORACLE by itself gives that feature to us. Please share your thoughts and appreciate participation on this good topic.
Thanks

Hello,
Yes, these lines are related to the ftp destination :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_dest.htm#i1005607
Of course, a ftp server must run on the machine where you want to "send" the reports output...
Regards

Pull compressed file (.gz format) via FTP and place on Application server

Similar Messages

Maybe you are looking for