Punch in problem-Why does cycle mode activate and snap to somewhere else when I set up a punch?

Because whoever programmed it must be ********, I've dealt with this issue long enough. I've sent Apple feedback on this issue long ago and nothing has been done yet. The only work around is to try and remember that every time you double click in the punch line to hit the c button to turn it off before you start recording or you have to drag your punch line around all the time, what a pain in the ***.

Similar Messages

Why does firefox hang up and say it "got confused", when I try to switch from using facebook as myself to using facebook as a page I manage?

firefox hangs up and says it "got confused", when I try to switch from using facebook as myself to using facebook as a page I manage.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Why does my screen blank and need to be refreshed when I switch between multiple open tabs and is there a fix to this?

If I have one tab open at a site, and then open a new tab to a different website, when I click back on my other tab the screen is a blank gray color and I have to refresh it to get the site back. This happens almost every time I switch between my open tabs, no matter which tab I am going back to. I am not having this problem in any other browsers. This has only started happening in the last couple of months and it has gotten really annoying. Does anyone know how I can stop this?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Why does the move tool and the resize function freeze when I insert pictures to a layer?

This is very annoying. I was stupid enough to buy a one year subscription to Photoshop CC, only to find that it is ruining my happiness. I am trying to run it on a brand new Macbook Pro 15 retina i7 running Yosemite, and everything works fine, except for this one thing - when I drag a new photo into a layer, the resize function and the move tool stops working for a very long time. If I am patient enough, the functions will finally wake up. Is there a way to get around this problem? I have searched the forum without any luck, and I am just about to start jumping up and down, calling Adobe by names that will make my neighbors cover up their ears. $/!"%%#/&%"#W)!ÆY!!!

Right-mouse on the Synaptics toolbar icon to bring up Mouse Properties, select the Device Settings tab, press Settings to bring up Properties for Synatpics ClickPad, on the left open Pointing... Sensitivity... Palm Check. This is a feature to prevent accidental touchpad movement by your palm while you're typing. So it prevents use of the touch pad when keys are directly used.
Good luck!

Why does my retina MBPro and the projector go blank, when connecting with HDMI? This worked fine until the latest OS and firmware update.

Connecting through HDMI worked fine, until the recent firmware update and the 10.7.5 OS update. Now, both retina display and projector dosplay go blank, with the screen coming back when unplugged from the projector.

Clone your system.
Never apply updates w/o one.
And yes there is a page with all the Apple Downloads to do manually and then you can keep it on hand. Same for the OS X Lion or ML installer - save them before running. Still on 10.6.8 so you have OS X 10.6 DVD.
Combo updates do not do any harm. There could be issues to the drive directory beforehand.
Mac Pro has been shipping with Lion since summer 2011, though you can even now still reinstall iwth 10.6.4+

HT204291 Airplay intermittent problem, why does not airplay work well anylonger?

Airplay intermittent problem, why does not airplay work well anylonger. Suddenly it drops out. Now this function has gone from great to ****.
Trying to view streamed content from the ipad to the Apple TV? Nah forget about it. Sooo dissapointing.

Restart your wifi router

When using office for mac or i studio after inserting several pictures, my computer locks up and the only way I can fix it is to do a force quit. Why does it do this and how I I get it fixed without a force quit?

I have a mac book, with office for mac and iStudio installed. When I try to create a document using either one of these; after inserting several photos, the computer locks up and the only way I can get it to unlock is to do a force quit. Why does it do this, and how can I get it to unlock without having to do a force quit?

Are you using versions of the software that are compatible with the version of OS X you have installed? Very often such lockups are caused by application incompatibility.
The problem may also come from trying to use both sets of applications at the same time while not having enough RAM installed. Adding more RAM may fix the problem.
The problem can arise from corrupted support files such as preference files or Application Support files or corrupted cache files.
The image files you are using may also be corrupt thus causing the problem.
You might start with:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?

The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?

Hi there. I'm having the same problem: my iPad won't import some photos from a folder, saying that they can't be read. They are all JPEGS and some photos taken at the same time have synched fine, but out of a folder with 200 photos, it only lets me synch 37. I'm synching albums created via Photoshop Elements 6, which has worked fine until now.
I've tried deleting all photos and re-synching, and have also deleted the iPod Photo Cache, but it hasn't made a difference.
The iPad auto-updated to the latest version of iTunes, so maybe that's what's causing it?
Any advice gratefully received!

Why does 'User not registered for online use' show up when I try to import a cd into itunes. None of the cd info shows up either

Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.

Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done?

Why does my camera roll use 10GB of my space, when I only have 508 photo's and video's on my camera roll?

I have some problems with the space on my Iphone 4s. I always get a message that says that I can't rec or can't take another picture because I don't have enough space on my phone. When I go to settings and check, my photo's and video's use almost 10GB (9,8GB). I have 407 pictures and 101 video's (not very long videos, more like short but many). In total i have 508 photo's and video's in my camera roll. My friends have like over a thousand pictures and video's, but they haven't used like 10GB of their space. So why does my 508 picutures and videos use som much more space??

Videos add up fast. A 30 second video on a 4S could easily be 85 MB. 101 of these would be almost 8.6 GB. Add 407 photos at 3 MB each and you reach 9.8 GB.
I would suggest you import some of these to your computer (especially some of the vidoes) and delete them from your phone, as explained here: http://support.apple.com/kb/HT4083.

Why does my Adobe Reader (10.1.3) freeze-up when I down load statements from some websites?

Why does my Adobe Reader (10.1.3) freeze-up when I down load statements from some websites?
When I down load statements from some websites, the pdf freezes and I get a message that the website is not responding and that windows is checking for a solution for this problem. I have uninstalled and reinstalled many times. I really like the Adobe Reader, but I need answers on why this is happening and how to fix it. AN AUTOMATIC UPDATE FROM 08/23/11 DOESN’T CUT IT!!

Acrobat Cleaner Tool
Mylenium

Why does Flash/Flex Builder 4 Premium downgrade to Standard when I install Flash Player Debug?

Why does Flash/Flex Builder 4 Premium downgrade to Standard when I install Flash Player Debug?
I installed a corporate install of Flex/Flash Builder 4 Premium, and verified that it was the Premium version was installed. The Start Page said that Flash Player was needed to display the text, so I installed Flash Player 10 Debug -- first download link from here:
http://www.adobe.com/support/flashplayer/downloads.html
When I then started Flex Builder 4, the splash screen showed Premium, but as soon as the Start Page was visible, it showed "FB Adobe Flash Builder 4 Standard" --- Help | About showed Standard, and the splash screen from then on showed Standard.
A Google search showed a work around for this, but it requires a license for Premium, which I don't have because our corporate install has it built-in:
http://bloginblack.de/2010/05/adobe-master-collection-cs5-breaks-flash-builder-4-premium-a nd-how-to-fix-it/
1. Anyone know how to resolve this?
2. Can Adobe fix this?
Thanks!

I had similar problem. I was involved in Flash Builder prerelease program and few months later I installed Adobe CS5 Master Collection. After that I had a same situation. Best thing was, my Flash Builder Beta was Premium version but acted like Standard, and FB from CS5 was Standard but acted like Premium. I removed CS5 and beta version of CS5. used CS5 Cleaning Fix and then reinstalled my apps.
I was lucky that I didn't have many big projects involved in FB beta or CS5 workspaces, I heard some guys had problems with migrated workspace configurations but I don't know what was the problem.

When I started up my macbook Pro after a boat trip (just lying in my bag the whole time) it started making weird sounds. Why does it do that and how do I stop it?

When I started up my macbook Pro after a boat trip (just lying in my bag the whole time) it started making weird sounds. Why does it do that and how do I stop it?

The 13" retina MBP has two fans, left and right near the hinge and about 2.5" each from the edges of the case.
My conjecture is that one of the fans may be failing. An appointment at an Apple store genius bar is the best option. The evaluation will be FREE and a fan replacement (if that is the problem) should not break the bank account.
You might run an Apple Hardware Test:
http://support.apple.com/kb/PH11342
This may confirm my suspicion or perhaps find a different problem. Note that an error free result should not be viewed as being definitive.
Ciao.

Why does the name change to my dad's name when I use his credit card for downloads?

I have an iPod touch. I have my own apple ID and icloud account. Why does the name change to my dad's name when I use his credit card for downloads? Is there a way I can have my own account and use my dad's card without having his name on my photostream and icloud?
I went on icloud.com and changed my name but it changes the credit card name to mine as well so I can't get apps unless its under his name, but it confuses everyone i share photo streams with, as there are two of my dads?
My aunt is having the same problem with her photostream, so I know its not only me.

I have this problem and it's annoying. Plenty of people in this world do not pay for their own stuff!. So i have 5 kids. All there accounts show as my name when people add them for Photo streams etc etc. This is ridiculous. Why not seperate billing address / credit card details to the name of the person on the account? Why do they have to be the same?

Punch in problem-Why does cycle mode activate and snap to somewhere else when I set up a punch?

Similar Messages

Maybe you are looking for