Purchase Order created for a Purcashe Contract

Hi Experts,
I am an ABAPer , I need to fetch Purchase orders ,Purchase Requistioons created for a particular Purchase Contract.
Thanks a Lot in Advance

Pass the purchase contract number in field EBAN-KONNR for getting the Pur Reqs and EKPO-KONNR for getting the POs

Similar Messages

CONFIRMATION OF PURCHASE ORDERS CREATED FOR SERVICE

Hi,
We have implemented the Extended Classic Scenario on SRM 5.0 and WF1400020 has been activated for Confirmation of Services. When a service confirmation has been done, but not yet approved, the system allows you to create another confirmation, even although the first confirmation was for the full quantity on the purchase order. Can anyone please assist in explaining why this is allowed.
Thanx

Hi Marinda,
your problem was mine. I've posted for it a message to SAP AG.
Unfortunately, I have to inform you that the system behaviour you have
described in this message is exactly how it is designed to work.
Technical reason for the system behaviour:
After approving a confirmation the system performs the following steps:
1) it creates an IDoc which will be passed to the backend for creationof the goods receipt document on the backend.
2) at the same time it creates an entry in table BBP_DOCUMENT_TAB for
the PO. If a user now would try to perform a confirmation he will get
the error message 'System user' already processing purchasing doc item
'xxxxxxxxx' 'xxxxx'
3) the entry in table BBP_DOCUMENT_TAB remains in the table until the
report CLEAN_REQREQ_UP has detected that the goods receipt document in
the backend has been posted succesfully. Then this entry will be deleted and the status of the PO will be set to "Fully delivered" respectively
in case of a partial delivery the open quantity will be reduced accordingly
If you want to achieve the immediate locking of the PO
for confirmation you always have to use a workflow without an approval
step for the confirmation
I hope this information has helped you.
Please, is useful, reward points to me.
Regards,
Christian

Posting not possible in Purchase Order created for Asset.

Hi All
I have created a Purchase Order for Asset. While making down payment for the same through f-48, I am not able to post the same. How I will take care of this?
Please guide how to make the posting.....
Thanks
Ruby

Hi,
your question is not clear. There are two possibiliteis-
1. you are making the payment with reference to PO. In this case enter PO number and the line item number in po in option Purcgase doc.
2.You are making the down payment against the asset. In this case you need to configure in AO90 the DP Accounts. And put the asset number in f-48 while entering the data.
Regards

Purchase order created for the pr,status in pr shows not edited

Dear experts
PO was created with reference to PR for two line items under external services.
then service entry sheet was created for the line 1 item.
line item 2 in PR still shows not edited , when there is already PO raised for that item.
what criteria should be checked,how to make second line item edited in PO.
Thanks & Regards.
Erfan.

Hi
Any solutions plz.
Regards.
Erfan.

FM to get purchase requisiton created for Sales order in APO

Hello experts,
I want to know is there any FM or BAPI exists in APO to get Purchase requisiton created for a sales order created in R/3 using sales order number? and FM or BAPI to get the sales order config data. if the mapping of sales order and purchase requisition is in Table, Please mention those tables also.
Many thanks,
Senthil

Hi,
Please see the below link for useful SCM BAPIs....
http://wiki.sdn.sap.com/wiki/display/SCM/SCM+BAPIs
For sales order config data, BAPI_SLSRVAPS_GETLIST2 is available.
Regards,
Saurabh

Purchase order approvals for Negative amount

Hello All,
Want your assistance on the above mentioned topic.
We have a business requirement to have Purchase order approvals for Negative amount. I understand from the Below SAR that JD Edwards 9.1 doesn't support PO approvals on Negative amount
Bug 11022294 : APPROVAL ROUTES FOR DEBIT MEMO - SAR: 8940968
Appreciate if you can suggest best practice or workaround to meet this requirement.
Thanks & Regards
Nikhil M. Pawar.

Dear Ashutosh,
Couple of points from my side. We have a similar scenario at a client where I am working. In construction, there are three stages.
a) Practical Completion
b) Partial Completion and
c) Final Completion.
In the case above, you are not deducting an amount from existing PO, you would be applying a penalty on the Vendor for Failure for not meeting the Practical/Final Completion Certificate requirements. Based on the legal understanding, usually the penalty may vary above and beyond of 10% of value of work not done/ delivered. (This is company to company)
So we establish that the scenario above is not a case for PO, but for Penalty. Now penalty in construction business again is of three types (My understanding again from experiences)
a) Time/Schedule based penalty - Levied on vendor due to delays (Ranging for 100 SAR/ Day to 400 SAR/Day - if you are in Saudi)
b) Cost/ Quantity Based penalty - Deviation from Standard Plan/ over consumption against budgeted quantity in Bill of Ladding
c) KPI/ Quality Based Penalty - This can be a levied for number for reasons, including non completion of agreed deliverable in Contract. (This can be even 150% of contract value)
Now, penalty is a revenue to the Organization so this needs to be accounted differently. You apply a Penalty against a PO and create a Debit memo and show the penalty as revenue in the books. This cannot be done if this is entered as a PO.
So, my point is, you need a customization to capture the penalty and apply it against the PO and account it as a debit memo in Finance side.
Please let me know your thoughts, I will be glad to hear if I need to be corrected.
Rgds,
Abhi

Report including open purchase order quantity for one storage location

Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
Alicia

hI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material.

Purchase order number for each postings with FBL3N

Hello
With tcode FBL3N, I need to get all the postings on expenses accounts. Additionally it is possible to get more information on the postings from the orginal paper invoice. It shall be also more convenient to get the purchase order number walk trhough SAP with it. Then is it possible to get the purchase order number for each postings with FBL3N?
thanks for inputs
sb

Hello,
Could you please add field BSEG-EBELN as a special field in FBL3N (from
menu path Settings -> Special fields).
Then, select the Purchase order field again from "Change Layout"
(Ctrl+F8). Now this field is available for display variants, it has the
technical name 1-U_EBELN and the description 'Purchase Document'.
The other field has the same description but as technical name
'1-EBELN'. When you create a display variant be aware that you select
1-U_EBELN and not 1-EBELN.
*******Please also refer to attached notes 215798 and 984305.
Best regards, Hana

Change of Sold to Party in Sales order created with Reference to Contract

Dear Gurus
I want to change the sold to party in Sales Order created with reference to contract.
When I create a Sales order with reference to contract the system copies all the partner functions- Sold to, Ship to, Bill to and Payer alongwith other data.
However Sold to is marked as "Grey" and not changable, rest of the partners can be changed.
There is no subsiquent document created with reference to this Sales Order.
Please advice.
Thanks a lot.
Regards
Raghu

Hi ,
Please follow the below mentioned step.
1) Create a partner function letts say Authorized SP .
2) Assign all the possible authorised SP (customer) in the contract.
3) When you create sales order with reff to Contract. Put the customer for whom you wish to create a sales order in release partner tab.
Hop this will resolve our problem
Regards,
Krishna O

Problem Purchase order created in SAP R/3 sent in to File XI?

Hi all,
I am new to XI, learning it myself.
I am trying to "send purchase order created in SAP R/3 into XI". For that I am following the document titled as "A Beginners Guide to SAP XI
Settings, Part I ". But I am getting problem in connecting R/3 system to XI system.
I am stuck at very first step in the documentation which says:
Setting Communication ports: in this it asks for "RFC Destination"
Please suggest me the step by step procedure to get through it.
Thanks and Regards,
Ravi

Hi,
go through these links...
1. /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
2. IDOC to File
3. /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
4. /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
5. Re: Idoc to File Scenario
regads,
Ansar.

Purchase order created by "Procurement Document" is not printed automatical

Hi all experts,
After and upgrade to 8.81 (from 2005A) some funcionality was lost.
In Print Preferences it is set that the document Purchase Order shall be printed automatically when adding document.
This works if you add the document directly in Purchase module.
But, if you add the document via a Sales Order
- on the Logistics tab, mark the field Procurement Document to create the PO -
the Purchase order is not printed.
Has anyone seen any changes regarding this functionality or is it a bug?
Thank you!
Kind regards,
Susanna

Hi all!
Just F Y I - this is an error in this version that is a candidate for future versions:
"After detailed investigation of the Business Impact and the Product Strategy we came to the decision that the correction of the system behaviour is not feasible in the currently supported versions of SAP Business One. Theerror has been recorded and is a candidate to be fixed in a future version.
Please see note 968358 and note 1644710 for further information.
Like a workaround please use the document printing option to print all the purchase order created using the procurement wizard."
Thank you for all help!
//Susanna

There is still a purchase order commitment for WBS

Hi All,
We need to close whole project while closing I am getting the attached error.
There is still a purchase order commitment for WBS
Additional Information or Comments: = I have checked and closed all purchases order commitment. But still the project shows the below error .
Edited by: nandhasapfi on Sep 22, 2011 10:52 AM

Hello,
This message is being output correctly as the AuC still has
values against it.
These values must be cleared before you can close the WBS element.
Please do a FUL settlement against the WBS element to clear
these values and then try to set the CLSD status again.
There are two ways to 'clean' the AuC, so that you can deactivate it
and close the wbs element:
1. Post a manual retirement of the AuC to clean it.
2. Create a new AuC and use it for all the differences in the final
settlement.
I hope this helps,
regards
Ray

Email Sending of Purchase Order Created versus Print Output

Dear All,
I have been successful in sending the Purchase Order created as a PDF Attachment in email.
The problem i am facing is in the formatting of the attached output.
The attachment has different bold characters as compared to the print output of the PO , though both the outputs are using the same sapscript.
I am not able to find the reason for the difference.
Only because of this reason, my delivery is on hold.
Please guide me on how to find where the difference could be and how to rectify it.
Thanks & Regards,
Bhavika

Could you tell us which fonts you tried?
What device type did you choose? (SPAD transaction, select your output device to determine the device type)
Could you upload TrueType fonts (one normal, one bold) with RSTXPDF2 program (do not tick "do not embed font in PDF" option so that the font is embedded in the PDF file)?
Did you make sure that your font is not converted to another one? (SE73, printer font, choose your device type, click conversion button, and check what is the converted font)

I Need interactive report to list the purchase orders details for a vendor

I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

Restrict print out of Purchase order only for Production system

Hi,
I want to restrict print out of Purchase order only for Production system, don't want to take it in devep or quality.
is there any identifier to find the system is production or development.
can anyone tell me how to restrict it,
is there any function module, not based on client system.
Thanx in advance
Kesav

Hi Kesavarathinam Vaidyalingam ,
yes, I also use thomas' suggestion using
t000-cccategory = 'P'.
to determine productive client.
Just one small hint: I found this condition as true in a test system: The admin had done a system copy to create a fresh test client - but forgot (or did not see a good reason) to change t000-cccategory = 'P. to t000-cccategory = 'T'.
Regards,
Clemens

Purchase Order created for a Purcashe Contract

Similar Messages

Maybe you are looking for