Purchase order excise invoice details

hi experts,
i am creating a simple report for purchase order excise invoice details.
here are the tables what i am using for the report
j_1iexchdr
ekpo
ekbe
is tables are correct....
can any one suggest weather it is better to use for all entries in or innerjoin ......
was there is any standard report for po excise invoice datails.....
any one was working on this report please give me the details about the key relations about the report.
Thanks in advance.
Regards,
karunakar
Edited by: bkarunakar on Jun 30, 2011 9:11 AM
Moderator message: please search for available information/documentation, e.g. Please Read before Posting in the Performance and Tuning Forum.
Edited by: Thomas Zloch on Jun 30, 2011 10:22 AM

Hi Yoga,
You can use Parner Schema in your Vendor Master for this issue.
If you want a partner schema for your own document type then define your partner schema and assign to document type using the below mentioned path.
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER ->DETERMINATION - >PARTNER SETTINGS IN PURCHASING DOCUMENTS ->DEFINE PERMISSION PARTNER SCHEMAS
And then
ASSIGN PARTNER SCHEMAS TO DOCUMENT TYPE
Bye,
Muralidhara

Similar Messages

Purchase Order and Invoice creation

Hi All,
I am having some fields related to Purchase order and Invoice creation, i have to find out the tables to which tables these fields belongs to.
Below are the Header fields:
Wrbtr Tcode - MIRO,
Lfsnr   Tcode - MIGO,
Evertn Tcode - Me32k,
Kbetr Tcode - Me32k,
Kschl Tcode - Mek1,
Selkz Tcode - Mek1,
Werks Tcode - Mek1,
Evart   Tcode - Me31k,
Frgco Tcode - Me35k,
Sddat Tcode - Me35k,
Below are the Detail fields:
Kbetr   Tcode - Mek1,
Konwa Tcode - Mek1,
Lgobe Tcode - Me21n,
Planloc Tcode - Me31k,
Datab   Tcode - Mek1,
Datbi    Tcode - Mek1,
Fromdate Tcode - Me31k,
Todate      Tcode - Me31k,
i have to retrive all these fields from tables, so plz anybody give me exact tables to use in the select quries to retrive these fields.
Thanks in advance,
Balu.

Hi,
U can get the req fields as follows:
Below are the Header fields:
1)Wrbtr Tcode - MIRO- table rseg ,field-wrbtr
give belnr (invoice no ) & BUZEI(item) if known, else, give ebeln,ebelp.
2)Lfsnr Tcode - MIGO,-table mkpf,give mblnr (mat doc no ) & ZEILE(item) field-xblnr or give ebeln,ebelp
3)Kbetr Tcode - Me32k,
table:konp or konv.
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get kbetr.
4)Kschl Tcode - Mek1,
Pass ebeln,ebelp to table ekpo, get mwskx(taxcode), u will get condition type kschl from FM -FI_TAX_GET_CONDITION_TYPES.
or
table:konh or konp or konv.
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV   as KNUMH in 1 of the tables-konh or konp or konv, wil get kschl.
5)Werks Tcode - Mek1,-table-ekpo, field-werks(give ebeln,ebelp)
Below are the Detail fields:
1)Kbetr Tcode - Mek1,
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get kbetr.
2)Konwa Tcode - Mek1,
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get konwa.
3)Lgobe Tcode - Me21n,give ebeln.ebelp in table ekpo, get lgort.pass lgort to table t001l, u wil get lgobe.
4)Datab Tcode - Mek1,table-konh,field datab
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in - konh ,wil get datab.
5)Datbi Tcode - Mek1,table-konh,field databi
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in table- konh,wil get databi.
Hope its useful to u.

Excise Invoice details in FBL1N Required

Hi Gurus,
Is there any way where i can Display the Excise Invoice details while displaying Customer Line Items thru T.Code FBL1N.
I am not able to insert a special field from settings either.
Is there a solution..

Your question is a little confusng - Do you mean to say you want to view the Excise info also ? If so, how is it being recorded on an invoice - Based on that, you would be able to add that field in the T Code FBL5N.

Out going Excise Invoice details in A/P CreditMemo

Hi..,
I Need Outgoing Excise Invoice Details in A/P Credit Memo (I.e).., Excise Removal Time in A/P CreditMemo .I had selected OOEI table with ExcRmvTime ..,Relating the table with customer/Vendor Code of A/P Credit Memo .But it is not displaying the details.Can any suggest a solution to fix this issue.
Thank You.
Regards ..,
Ashok.

I think you are trying to create a/r credit memo from
ar invoice.
In ar credit memo system prompts to enter excise reference no in accounting tab for that
click open OOEI in find mode enter
delivery number in remarks field as below.
For example delivery no is 100050* in remarks field,
press enter,now OOEI will open there you can find excise
reference number below contact persons.
Copy excise reference number & paste it in
ar credit memo.
Jeyakanthan

New Output type for purchase return excise invoice..?

Hi all
For purchase return process with exisable material.
Here I m using the transaction
1.J1IS to create purchase return excise invoice and
2.J1IV for posting to accounts & print purchase return excise invoice
.In standard SAP the output for purchase return excise invoice is JEXC.
here my query is started,
ABAPer created the new program for purchase return output with all new layouts,
And from functional side i have defined new output type for the same as YEXC copying from JEXC.
While doing the transaction J1IV, i getting the output type YEXC, i m not able to print preview.
To proceed further i need some body guidence. Like where to assign the output type.
some body can give some inputs .
Thanks
sap-mm

Hi AP thanks for ur immediate response.
But i have done all the configuratuion in NACE only.
There in nace i m not able find out the mistake or missing configuration.
Can u expalin me step by step process end to end .
Thanks
sap-mm

Using MM excise invoice details in SD report

hi friends,
i have a requirement that i have to use MM excise invoice details in SD report.
inwhich both billing document nos are same .
can any one explains the clear solution for this report.
thanks in advance.
Regards,
karunakar
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Jun 27, 2011 2:55 PM

Hi
you want to see the invoice column in FBL5N report. first you need to check the current layout selection. this fields are available or not. if available then add that fields.
if fields are not available then goto menu "Settings - special fields" OBVU.
then add this fields in this.
before add this fields here. please check the data is updating in BSEG tables and which fields it has updating.
hope this will help you.
Regards
Ram

Porder excise invoice details

hi frnds,
i am facing a sictuation that i hav to create a report about the excise invoice details.
i know th tables
t001w
j_1iexchdr
ekpo
ekbe
i want to extrat data by using for all entries
i want how to extrat the data that means key relations abt the tables
thanks,
karunakar
Moderator message: please see my message in your previous post.
Edited by: Thomas Zloch on Jun 30, 2011 11:10 AM

Your question is a little confusng - Do you mean to say you want to view the Excise info also ? If so, how is it being recorded on an invoice - Based on that, you would be able to add that field in the T Code FBL5N.

Return Order - Excise Invoice

Dear SD Gurus,
This scenario is related to Return Order - Excise Invoice. In return order first we will create return Order (with Ref. to Billing Document) - Return Delivery- Billing.
Now I require clarification on Excise Invoice returns. How to cancel the Excise Invoice especially in Return Order.
My Client Requirement is as follows.
I raised normal order of 10 items, Delivery, billing, Excise invoice and Updated in RG1 also. Now the question is if the same order came as return of 2 items. I can raise the return order with ref. to the above order. I can handle up to billing. But my point is how to cancel the Excise invoice and Updated RG1 for the 2 items (Which was returned).

Hi,
Follow the same process like return sales, once u get the billing doc, go to J1IH, create with ref to the billing doc.
the excise valuess will be reversed.
To give customer credit, choose Additional excise so that you will have the option of Modvat Account Selection at the bottom screen. Choose whichever account you want to be adjusted and proceed.
Similarly, for debiting cenvat entries, choose Other Adjustment and here again, you have the option as to which book account the amounts should be debited. Choose the appropriate one from Modvat Account Selection tab and proceed.
If you are not sure and clear on the above explanation, please sit with FI consultants and proceed.
Return Sales Flow:
Incase of Return Sales Order:
T.Code for copy control: VTAF
Source Document: F2
Target Document: RE
Item category REN
Considering the above settings are done:
Create return sales order RE (with Reference to Billing Document) & the data will be copied as it is in Return Sales Order - RE. For Eg: here you require to change to quantity from 10 to 2, as you want to take back into Inventory of only 2.
Incase of Return Delivery:
T.Code for copy control: VTLA
Source Document: RE
Target Document: LR
Item category REN
Considering the above settings are done:
Create Return Delivery through T.Code VL01N & do PGR (Post Goods Receipt). This will add the stock to blocked stock. This will take care of Inventory.
For updating of excise related sales returns, run T.Code J1IH and do the following:-
Customer Credit
Choose the u2018Additional Exciseu2019 input the original excise invoice reference, document year, company code, plant and excise group and execute. There input manually what value you need to give credit and save.
Cenvat Debit
Choose u2018Other Adjustmentsu2019 and here also, maintain the datas whatever you input as above and save.
Incase of Credit Memo:
T.Code for copy control: VTFA
Source Document: RE
Target Document: Credit Memo
Item category G2N (Check in System)
First in VA02, remove the Billing Block in Return Sales Order - RE & save the document. Now in T.Code: VF01, enter Return Sales Order Number & select the appropriate Billing Type (Credit Memo) & Enter& Save. This will create Credit Memo.
Regards,
PM

HOW TO KNOW THE EACH PURCHASE ORDERS GROSS INVOICE VALUE

HI SIR,
ANY BODY PLESAE TELL ME
HOW TO KNOW THE EACH PURCHASE ORDERS GROSS INVOICE VALUE BY GROUP WISE PER SPECIFIC TIME PERIOD.

hi
try ME80FN
regards
vijay

Different Currency in Purchase order and Invoice

Hi MM Gurus,
Kindly suggest me as to how to map the following scenario is SAP.
Purchase order is placed on the Vendor in currency USD. Vendor is from India.Excise details are not captured in Purchase order. Vendor invoice is in currency INR and all the applicable duties will be mentioned and this has to be
captured in Invoice entry.
Regards
Yoga

Hi Yoga,
You can use Parner Schema in your Vendor Master for this issue.
If you want a partner schema for your own document type then define your partner schema and assign to document type using the below mentioned path.
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER ->DETERMINATION - >PARTNER SETTINGS IN PURCHASING DOCUMENTS ->DEFINE PERMISSION PARTNER SCHEMAS
And then
ASSIGN PARTNER SCHEMAS TO DOCUMENT TYPE
Bye,
Muralidhara

Purchase Order with Invoice Plan

Hi,
I need to understand working with Invoicing plans for a Purchase Order. Especially the service PO for the rents and other related services.
How the PO is linked to the Invoice Plan and how the process happens in SAP?
Thanks in advance!

Creating an Invoicing Plan
The following procedure describes how to create an invoicing plan with the pre-Enjoy ordering transactions (ME21, ME22, ME23).
The procedure described is also applicable u2013 with certain restrictions u2013 to the Enjoy purchase order (ME21N, ME22N, ME23N).
If you are using the Enjoy purchase order, you will find:
·         The Invoicing Plan button and the indicators for GR-based invoice verification (GR-Based IV), service-based invoice verification (Srv.-Based IV), evaluated receipt settlement (ERS), and invoice receipt (Inv. Receipt) among the item details on the Invoice tab page.
·         The account assignment among the item details on the Account Assignment tab page
·         The Goods Receipt and GR Non-Valuatedindicators among the item details on the Delivery tab page
Prerequisites
Vendor Master Record
Before you can use the invoicing plan with automatic settlement, the Evaluated Receipt Settlement Delivery indicator must be set on the Purchasing Data screen in the vendor master record.
(If you wish to enter invoicing dates manually, this is not necessary.)
Purchase Order
●     We recommend using a framework order (that is a purchase order with a validity period and a reason for rejection). The invoicing plan can adopt the validity period specified in the PO header.
●     PO items for which you wish to use an invoicing plan must have account assignment irrespective of whether a material with a master record, a material described by a short text, or an external service is involved.
●     The GR/IR control facility must be set up in such a way that no goods receipt (or, in the case of services, no service entry) is expected - only an incoming invoice. If you wish to have automatic settlement, you must also set the Evaluated Receipt Settlement indicator.
If you nevertheless wish to allow service entry sheets for the item (e.g. for information purposes only), you must set the GR Non-Val. indicator.
Customizing
Under Purchase Order à Invoicing Plan in Customizing for Purchasing, you can maintain data such as the desired invoicing plan types, date categories, and date descriptions.
Procedure
       1.      Create a purchase order with account assignment (framework order).
Click to access the item overview (or the overview of service lines if you chose item category D for services).
       2.      Enter the desired material or service, the quantity, and the price.
       3.      Select the desired item and click Account Assignments to access the account assignment screen. Enter the account assignment for this item.
       4.      Click to access the item detail screen. Check that the GR/IR control indicators are set correctly on the item detail screen.
○     The GR and GR-Based Invoice Verification or Service-Based Invoice Verification indicators must not be set.
○     IR must be set.
○     You must set ERS if you wish to have Evaluated Receipt Settlement.
○     If you wish to have service entry sheets purely for information, for example, allow non-valuated goods receipt (i.e. select the GR Non-Val and GR indicators).
       5.      Choose Item ® Invoicing Plan. A window appears, in which the invoicing plan types predefined in Customizing are suggested. Choose the desired invoicing plan type and click Continue.
You can use the following invoicing plan types:
○     Periodic Invoicing Plan
■      You use the periodic invoicing plan if the total value of the PO item is to be invoiced in each period.
■      The system creates the invoicing dates automatically on the basis of the settings in Customizing.
■      The invoicing date and the amount to be invoiced are shown for each settlement period (e.g. month). In the case of the periodic invoicing plan, the amount represents the total value of the PO item.
■      You can change the suggested dates and block individual dates for automatic invoicing if necessary.
■      You can enter the start and end dates for the invoicing plan.
■      With the Dates from and Dates to fields, you can determine that an invoicing plan does not contain invoicing dates extending over the entire validity period of the purchase order but only for a certain period within that validity period. (E.g. within a validity period from 1.1. to 12.31, only dates within the period 1.1. to 06.30.)
■      With the Horizon field, you control how far into the future dates can be created. If you enter a date rule that adds six months to the current date here, invoicing dates will be created for just half a year in advance in each case.
The system automatically creates new dates if you change the invoicing plan or when you invoke the transaction for Updating Periodic Invoicing Plans. See Generating Further Invoicing Plan Dates
■      The In Advance indicator allows you to specify whether the invoice is to be created with regard to a prior or subsequent period. (E.g. at the beginning of February, either in advance for the month of February or in arrears for the month of January).
■      In addition, fields with information on the existing invoicing plan are displayed (e.g. the calendar upon which the date determination process is based).
○     Partial Invoicing Plan
■      You use the partial invoicing plan if the total value of the PO item is to be invoiced in several partial amounts.
■      You get an empty date overview in which you can manually enter the desired dates.
■      If you work with a reference invoicing plan, the system automatically generates dates in accordance with the reference plan.
You have the following options:
●      You create a reference invoicing plan in Customizing for the invoicing plan type.
●      You enter an existing invoicing plan as reference plan directly in the invoicing plan for the PO item.
■      You can flag a date in field B (Billing/Invoicing Rule) as follows:
●      As a down payment (percentage or value)
●      As an invoicing date (percentage or value)
●      As a final invoice
       6.      Click to return to the item overview.
       7.      Click to save the purchase order item with the invoicing plan.
You can then start the automatic invoice creation process during invoice verification.
For more information, refer to the section Settlement of Amounts Due Under Invoicing Plans.
Once assigned to an item, the invoicing plan type (e.g. partial invoicing plan) cannot be changed. If you wish to assign a different invoicing plan type, you must delete the item and create a new one.
Generating Further Invoicing Plan Dates
If you have assigned a periodic invoicing plan to a PO item but have not initially defined invoicing dates covering the entire validity period of the purchase order, you can generate further dates in due course.
You have created a PO item with a periodic invoicing plan for a certain planned procurement. The purchase order is valid from 1.1. to 12.31. When creating the invoicing plan, you specified one invoicing date per month for the first half of the year. You have not yet planned any dates for the second half of the year because you do not wish information from the invoicing plan to be passed on to purchase order commitments at this stage, for example.
By mid-June, it is clear that the PO is to proceed as envisaged, and you therefore wish to schedule invoicing dates for the remainder of its validity period.
Procedure
To schedule further invoicing dates, proceed as follows:
Choose Purchase order ® Follow-on functions ® Period. invoicing plan
Specify the purchase orders for which invoicing dates are to be generated in the invoicing plan and perform the function.
A log can be created if desired.
Result
The system adds further dates on the basis of information such as the validity period or horizon from Customizing, the purchase order, and the invoicing plan.
regards,
indranil

Purchase order and message details

Hi gurus,
We have a requirement of generating a report of how the purchase orders are being sent to vendor.
Is there any table or tables that stores information of a purchase order number and how the message (output type) has been processed to vendor like through what medium it has been sent to vendor.
Example Purchase order 3456 was sent to vendor through fax.
Purchase order 4563 was sent to vendor through paper.
Purchase order 7865 was sent to vendor through EDI.
The transmission medium by which it has been sent to vendor need to be captured by purchasing document.
So gurus, if anyone can advise me of table or relating tables that i can write a query or request abapers to write a custom report, that would be great.
Thanks in advance,
Kind regards,
Gopio.

Hi,
All the CONDITION RECORD details like MESSAGE, DESPATCH TIME & LANGUAGE are available in NACH table
Goto SE16 for NACH and enter the DOCUMENT CONDITION and get te details
hope it is helpful
thanks,
santosh

Purchase Order Status: Invoiced Quantity diregrading the oldewst invoice

Hi Guys!
We have upgraded from $4.6C to ECC6.0 and the following has been noticed by our users: when they first display an existing PO the invoiced amount in Status tab diregards the oldest invoice. When they refresh teh screen, by clicking Other Purchase Order and leaving the number of the PO unmodified, the invoiced amount in status is correct. Does anybody know what can be done?
Best regards,
Ileana

Hi,
please review the following information in SAP Note No. 456691 as
copied below:
18. Question:
When are the header conditions updated if a purchase order item is
deleted?
Answer:
If a purchase order item is deleted, the item is marked as 'statistical'
(field EKPO-STAPO = X) and the change is reflected in the header
conditions.
However, if for the item the final invoice indicator(EKPO-EREKZ) or the
inward delivery completed indicator (EKPO-ELIKZ) is set, the item is not
marked as 'statistical' (EKPO-STAPO is not set) and thus the header
conditions are not updated.
I hope this helps you
BR
Nadia Orlandi

Purchase order wise payment details

Hi ,
Requirement : Report for Purcahse order wise payment details
Is there any report , where we can see purchase order wise payment details

Hi,
Better u go with z report, i checked there is no std tcodes/reports for ur req.. and chek the blw link for query
/people/tao.zhang/blog/2009/04/07/magical-function-2-of-sap-query
Edited by: Jayakumar Raju A.S on Jul 6, 2009 7:03 AM

Standard report on purchase order and bank details

Respected all
I need a standard report in which i could get purchase order number , internal order number , vendor name , invoice number , cheque number , cheque amount and cheque date .
Is there any standard report available? your replies are highly appriciated.
thanking you
abhay

try MC.A
Please search before asking, even in your menu structure.
There are binocluar icons in your SAP Easy access screen to search in the menu.
Or enter SEARCH_SAP_MENU in the ok-field and search for transactions.

Purchase order excise invoice details

Similar Messages

Maybe you are looking for